docs: add German and English wiki documentation

.gitignore

@@ -39,4 +39,5 @@ _local/*
 website/*
 release.sh
 .github/copilot-instructions.md
-data
+data
+wiki

CHANGELOG.md

@@ -1,5 +1,822 @@
 # Changelog
 
+## [2.0.1] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- implement retry mechanism and timeout handling for API requests
+- add timeout handling and error states for vendor and filament operations
+- enhance weight processing with filtered display and API stability checks
+- implement weight stabilization functions and improve tare handling
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for version v2.0.1
+- update changelog and header for version v2.0.0-beta14
+- update platformio.ini for beta version v2.0.0-beta14
+- update changelog and header for version v2.0.0-beta13
+- update platformio.ini for beta version v2.0.0-beta13
+- optimize weight stabilization parameters for improved responsiveness
+- update changelog and header for version v2.0.0-beta12
+- update platformio.ini for beta version v2.0.0-beta12
+- update changelog and header for version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta11
+- update platformio.ini for beta version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta10
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [2.0.0-beta14] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- implement retry mechanism and timeout handling for API requests
+- add timeout handling and error states for vendor and filament operations
+- enhance weight processing with filtered display and API stability checks
+- implement weight stabilization functions and improve tare handling
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v2.0.0-beta14
+- update changelog and header for version v2.0.0-beta13
+- update platformio.ini for beta version v2.0.0-beta13
+- optimize weight stabilization parameters for improved responsiveness
+- update changelog and header for version v2.0.0-beta12
+- update platformio.ini for beta version v2.0.0-beta12
+- update changelog and header for version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta11
+- update platformio.ini for beta version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta10
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [2.0.0-beta13] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- enhance weight processing with filtered display and API stability checks
+- implement weight stabilization functions and improve tare handling
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v2.0.0-beta13
+- optimize weight stabilization parameters for improved responsiveness
+- update changelog and header for version v2.0.0-beta12
+- update platformio.ini for beta version v2.0.0-beta12
+- update changelog and header for version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta11
+- update platformio.ini for beta version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta10
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [2.0.0-beta12] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- enhance weight processing with filtered display and API stability checks
+- implement weight stabilization functions and improve tare handling
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v2.0.0-beta12
+- update changelog and header for version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta11
+- update platformio.ini for beta version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta10
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [2.0.0-beta11] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- implement weight stabilization functions and improve tare handling
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update changelog and header for version v2.0.0-beta11
+- update platformio.ini for beta version v2.0.0-beta11
+- update changelog and header for version v2.0.0-beta10
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+## [2.0.0-beta10] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- add fast-path JSON reading for web interface display
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v2.0.0-beta10
+- update changelog and header for version v2.0.0-beta9
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
+## [2.0.0-beta9] - 2025-08-30
+### Breaking Changes
+- enhance commit categorization for breaking changes
+- Handling of Spools with Tags from Vendors. fix: improve get_last_tag function to handle non-beta tags and fallback to newest tag
+
+### Added
+- add handling for successful NFC tag writes to send weight to Spoolman without auto-sending to Bambu
+- implement robust page reading with error recovery for NFC tags
+- enhance NFC tag reading with robust error recovery and JSON optimization for fast-path detection
+- implement robust page reading and safe tag detection with error recovery
+- add Manufacturer Tags support documentation in German and English
+- add display delay for vendor, filament, and spool creation processes
+- add progress bar updates for vendor and filament creation processes
+- update vendor and filament ID handling to use NULL and add delays for stability
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+- enhance NDEF decoding with detailed validation and debugging output
+- enhance NDEF decoding to validate structure and extract JSON payload
+- add logging for decoded JSON data in NFC processing
+- implement filament and spool creation in Spoolman API
+- Add JSON structure comments for filament and spool creation
+- Add vendor and filament management to API; implement recycling factory handling in NFC
+
+### Changed
+- update platformio.ini for beta version v2.0.0-beta9
+- update changelog and header for version v2.0.0-beta8
+- update platformio.ini for beta version v2.0.0-beta8
+- update changelog and header for version v2.0.0-beta7
+- update platformio.ini for beta version v2.0.0-beta7
+- update changelog and header for version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta6
+- update platformio.ini for beta version v2.0.0-beta6
+- update changelog and header for version v2.0.0-beta5
+- update platformio.ini for beta version v2.0.0-beta5
+- update changelog and header for version v2.0.0-beta4
+- update platformio.ini for beta version v2.0.0-beta4
+- update changelog and header for version v2.0.0-beta3
+- update platformio.ini for beta version v2.0.0-beta3
+- update createVendor and checkVendor functions to accept JsonDocument payload
+- update changelog and header for version v2.0.0-beta2
+- update platformio.ini for beta version v2.0.0-beta2
+- clarify product URL description for Manufacturer Tags in German and English documentation
+- update changelog and header for version v2.0.0-beta1
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+- update changelog and header for version v1.5.12-beta18
+- update platformio.ini for beta version v1.5.12-beta18
+- update changelog and header for version v1.5.12-beta17
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+- update changelog and header for version v1.5.12-beta16
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+- update changelog and header for version v1.5.12-beta15
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+- update changelog and header for version v1.5.12-beta14
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+- update changelog and header for version v1.5.12-beta13
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+- update changelog and header for version v1.5.12-beta12
+- update platformio.ini for beta version v1.5.12-beta12
+- update changelog and header for version v1.5.12-beta11
+- update platformio.ini for beta version v1.5.12-beta11
+- update changelog and header for version v1.5.12-beta10
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+- update changelog and header for version v1.5.12-beta9
+- update platformio.ini for beta version v1.5.12-beta9
+- update changelog and header for version v1.5.12-beta8
+- update platformio.ini for beta version v1.5.12-beta8
+- update changelog and header for version v1.5.12-beta7
+- update platformio.ini for beta version v1.5.12-beta7
+- update changelog and header for version v1.5.12-beta6
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+- update changelog and header for version v1.5.12-beta5
+- update platformio.ini for beta version v1.5.12-beta5
+- update changelog and header for version v1.5.12-beta4
+- update platformio.ini for beta version v1.5.12-beta4
+- update changelog and header for version v1.5.12-beta3
+- update platformio.ini for beta version v1.5.12-beta3
+- update changelog and header for version v1.5.12-beta2
+- update platformio.ini for beta version v1.5.12-beta2
+- update changelog and header for version v1.5.12-beta1
+- update platformio.ini for beta version v1.5.12-beta1
+- Merge branch 'main' into recyclingfabrik
+- Merge branch 'main' into recyclingfabrik
+
+### Fixed
+- call scale.tare() in setup after starting scale
+- update createVendor function to use external_id as comment instead of static text
+- update to_old_version in platformio.ini to reflect correct previous version
+- increase delay in start_scale function for improved stability
+- replace progress bar with message display for remaining weight in sendToApi function
+- update vendor check to use shorthand key in payload
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+- update spoolman ID reset values to 65535 for better API response detection
+- correct color_hex key usage and comment out unused date fields in spool creation
+- improve API state handling and vendor name formatting
+- enhance filament creation logic to include dynamic comments based on payload
+
+
 ## [2.0.0-beta8] - 2025-08-30
 ### Breaking Changes
 - enhance commit categorization for breaking changes

WIKI_DE.md

@@ -0,0 +1,468 @@
+# FilaMan Wiki - Deutsch
+
+## Inhaltsverzeichnis
+
+1. [Überblick](#überblick)
+2. [Installation](#installation)
+3. [Hardware-Anforderungen](#hardware-anforderungen)
+4. [Ersteinrichtung](#ersteinrichtung)
+5. [Konfiguration](#konfiguration)
+6. [Benutzung](#benutzung)
+7. [NFC-Tags](#nfc-tags)
+8. [Bambu Lab Integration](#bambu-lab-integration)
+9. [Spoolman Integration](#spoolman-integration)
+10. [Octoprint Integration](#octoprint-integration)
+11. [Hersteller Tags](#hersteller-tags)
+12. [Fehlerbehebung](#fehlerbehebung)
+13. [Support](#support)
+
+---
+
+## Überblick
+
+FilaMan ist ein umfassendes Filament-Managementsystem für 3D-Drucker, das auf ESP32-Hardware basiert. Es bietet Gewichtsmessung, NFC-Tag-Management und nahtlose Integration mit Spoolman und Bambu Lab 3D-Druckern.
+
+### Hauptfunktionen
+
+- **Präzise Gewichtsmessung** mit HX711 Wägezellen-Verstärker
+- **NFC-Tag Lesen und Schreiben** für Filament-Identifikation
+- **OLED-Display** für Status-Anzeigen
+- **WiFi-Konnektivität** mit einfacher Konfiguration
+- **Webbasierte Benutzeroberfläche** mit Echtzeit-Updates
+- **Spoolman-Integration** für Lagerverwaltung
+- **Bambu Lab AMS-Steuerung** via MQTT
+- **Openspool NFC-Format** Kompatibilität
+- **Hersteller Tag Unterstützung** für automatische Einrichtung
+
+### Systemvoraussetzungen
+
+- **ESP32 Development Board**
+- **Spoolman Instanz** (erforderlich für volle Funktionalität)
+- **WiFi-Netzwerk**
+- **Webbrowser** (Chrome/Firefox/Safari)
+
+---
+
+## Installation
+
+### Einfache Installation (Empfohlen)
+
+1. **Öffnen Sie den [FilaMan Web-Installer](https://www.filaman.app/installer.html)**
+   - Verwenden Sie einen Chrome-basierten Browser
+
+2. **ESP32 vorbereiten**
+   - Verbinden Sie den ESP32 über USB mit Ihrem Computer
+   - Klicken Sie auf "Connect"
+
+3. **Port auswählen**
+   - Wählen Sie den entsprechenden USB-Port aus
+   - Bestätigen Sie die Auswahl
+
+4. **Installation starten**
+   - Klicken Sie auf "FilaMan installieren"
+   - Warten Sie, bis der Installationsvorgang abgeschlossen ist
+
+### Manuelle Kompilierung
+
+Für erfahrene Benutzer mit PlatformIO:
+
+```bash
+git clone https://github.com/ManuelW77/Filaman.git
+cd FilaMan/esp32
+pio lib install
+pio run --target upload
+```
+
+---
+
+## Hardware-Anforderungen
+
+### Erforderliche Komponenten
+
+| Komponente | Beschreibung | Amazon Link (Affiliate) |
+|------------|--------------|-------------------------|
+| ESP32 Development Board | Jede ESP32-Variante | [Amazon](https://amzn.to/3FHea6D) |
+| HX711 + Wägezelle | 5kg Load Cell Amplifier | [Amazon](https://amzn.to/4ja1KTe) |
+| OLED Display | 0.96" I2C 128x64 SSD1306 | [Amazon](https://amzn.to/445aaa9) |
+| PN532 NFC Modul | V3 RFID-Modul | [Amazon](https://amzn.eu/d/gy9vaBX) |
+| NFC Tags | NTAG213/NTAG215 | [Amazon](https://amzn.to/3E071xO) |
+| TTP223 Touch Sensor | Optional für Tara-Funktion | [Amazon](https://amzn.to/4hTChMK) |
+
+### Pin-Konfiguration
+
+| Komponente | ESP32 Pin | Funktion |
+|------------|-----------|----------|
+| HX711 DOUT | 16 | Datenausgang Wägezelle |
+| HX711 SCK | 17 | Takt Wägezelle |
+| OLED SDA | 21 | I2C Daten |
+| OLED SCL | 22 | I2C Takt |
+| PN532 IRQ | 32 | Interrupt |
+| PN532 RESET | 33 | Reset |
+| PN532 SDA | 21 | I2C Daten (geteilt) |
+| PN532 SCL | 22 | I2C Takt (geteilt) |
+| TTP223 I/O | 25 | Touch-Sensor (optional) |
+
+### Wichtige Hinweise
+
+- **PN532 DIP-Schalter** müssen auf I2C-Modus eingestellt sein
+- **3V Pin** vom ESP32 für Touch-Sensor verwenden
+- **Wägezellen-Verkabelung**: E+ (rot), E- (schwarz), A- (weiß), A+ (grün)
+
+![Schaltplan](./img/Schaltplan.png)
+
+---
+
+## Ersteinrichtung
+
+### Nach der Installation
+
+1. **ESP32 Neustart**
+   - Das System erstellt automatisch einen WiFi-Hotspot "FilaMan"
+
+2. **WiFi-Konfiguration**
+   - Verbinden Sie sich mit dem "FilaMan" Netzwerk
+   - Öffnen Sie einen Browser (automatisches Portal oder http://192.168.4.1)
+   - Konfigurieren Sie Ihre WiFi-Zugangsdaten
+
+3. **Erster Zugriff**
+   - Nach erfolgreicher WiFi-Verbindung ist das System unter http://filaman.local erreichbar
+   - Alternativ über die vom Router zugewiesene IP-Adresse
+
+### Spoolman Vorbereitung
+
+**Wichtiger Hinweis**: Spoolman muss im Debug-Modus laufen:
+
+```env
+# In der .env Datei von Spoolman auskommentieren:
+SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+Dies ist erforderlich, da Spoolman noch keine CORS-Domain-Konfiguration unterstützt.
+
+---
+
+## Konfiguration
+
+### Waagen-Kalibrierung
+
+1. **Kalibrierung starten**
+   - Gehen Sie zur "Scale" (Waage) Seite
+   - Bereiten Sie ein 500g Referenzgewicht vor (z.B. Wasserglas)
+
+2. **Kalibrierungsschritte**
+   - Folgen Sie den Anweisungen auf dem Display
+   - Legen Sie das Gewicht auf, wenn gefordert
+   - Warten Sie, bis die Kalibrierung abgeschlossen ist
+
+3. **Validierung**
+   - Testen Sie die Genauigkeit mit bekannten Gewichten
+   - Bei Bedarf "Tare Scale" für Nullstellung verwenden
+
+### Spoolman-Verbindung
+
+1. **Spoolman-URL eingeben**
+   - Gehen Sie zur "Spoolman/Bambu" Seite
+   - Geben Sie die vollständige URL Ihrer Spoolman-Instanz ein
+   - Format: `http://spoolman-server:7912`
+
+2. **Verbindung testen**
+   - Das System prüft automatisch die Verbindung
+   - Erfolgreiche Verbindung wird durch grünen Status angezeigt
+
+### Bambu Lab Drucker (optional)
+
+1. **Drucker-Einstellungen**
+   - Öffnen Sie das Einstellungsmenü auf Ihrem Bambu-Drucker
+   - Notieren Sie sich die folgenden Daten:
+     - IP-Adresse des Druckers
+     - Access Code
+     - Serial Number
+
+2. **FilaMan Konfiguration**
+   - Geben Sie die Drucker-Daten in der "Spoolman/Bambu" Seite ein
+   - Aktivieren Sie "Auto Send to Bambu" für automatische AMS-Zuordnung
+
+3. **Auto-Send Timeout**
+   - Konfigurieren Sie die Wartezeit für automatische Spulen-Erkennung
+   - Empfohlener Wert: 10-30 Sekunden
+
+---
+
+## Benutzung
+
+### Grundlegende Bedienung
+
+1. **Filament wiegen**
+   - Platzieren Sie die Spule auf der Waage
+   - Das Gewicht wird automatisch auf dem Display und in der Weboberfläche angezeigt
+
+2. **NFC-Tag scannen**
+   - Halten Sie den Tag in die Nähe des PN532-Moduls
+   - Bei erkannten Tags wird die Spulen-Information angezeigt
+   - Das Gewicht wird automatisch in Spoolman aktualisiert
+
+3. **Status-Überwachung**
+   - **OLED-Display** zeigt aktuelles Gewicht und Verbindungsstatus
+   - **Weboberfläche** bietet detaillierte Informationen und Steuerung
+
+### Weboberfläche Navigation
+
+- **Startseite**: Hauptfunktionen und aktueller Status
+- **Scale**: Waagen-Kalibrierung und -Einstellungen
+- **Spoolman/Bambu**: System-Konfiguration
+- **Statistics**: Nutzungsstatistiken (falls aktiviert)
+
+---
+
+## NFC-Tags
+
+### Unterstützte Tag-Typen
+
+- **NTAG213**: 144 Bytes (grundlegende Funktionen)
+- **NTAG215**: 504 Bytes (empfohlen)
+- **NTAG216**: 888 Bytes (erweiterte Funktionen)
+
+### Tag beschreiben
+
+1. **Spule in Spoolman vorbereiten**
+   - Erstellen Sie eine neue Spule in Spoolman
+   - Stellen Sie sicher, dass alle erforderlichen Daten eingegeben sind
+
+2. **Tag-Beschreibung starten**
+   - Wählen Sie die Spule aus der Liste
+   - Klicken Sie auf "Write Tag"
+   - Das Display zeigt "Waiting for Tag"
+
+3. **Tag auflegen**
+   - Platzieren Sie den NFC-Tag auf dem PN532-Modul
+   - Warten Sie auf die Bestätigung
+
+4. **Erfolgsmeldung**
+   - Bei erfolgreichem Beschreiben wird ein Häkchen angezeigt
+   - Der Tag ist nun mit der Spoolman-Spule verknüpft
+
+### Tag lesen
+
+1. **Tag scannen**
+   - Platzieren Sie die Spule mit dem NFC-Tag auf die Waage über dem NFC-Reader
+   - Bei Problemen beim Lesen: Spule etwas anders positionieren (nicht ganz an den Rand)
+   - Die Spulen-Information wird automatisch geladen
+
+2. **Automatische Updates**
+   - Das aktuelle Gewicht wird in Spoolman übertragen
+   - Die Spule wird in der Weboberfläche automatisch ausgewählt
+
+---
+
+## Bambu Lab Integration
+
+### AMS (Automatic Material System)
+
+1. **AMS-Status anzeigen**
+   - Die Weboberfläche zeigt den aktuellen Zustand aller AMS-Fächer
+   - Beladene Fächer werden mit Filament-Informationen angezeigt
+
+2. **Filament manuell zuordnen**
+   - Wählen Sie eine Spule aus der Spoolman-Liste
+   - Klicken Sie auf das entsprechende AMS-Fach-Symbol
+   - Das Filament wird dem Fach zugeordnet
+
+3. **Automatische Zuordnung**
+   - Nach dem Wiegen mit aktiviertem "Auto Send to Bambu"
+   - Das System wartet auf neue Spulen im AMS
+   - Kalibrierte Filamente werden automatisch zugeordnet
+
+### Bambu Studio Integration
+
+1. **Filament-Profile synchronisieren**
+   - Kalibrieren Sie Filamente in Bambu Studio
+   - Verwenden Sie Device → AMS → Bleistift-Symbol → Auswählen
+
+2. **Setting-IDs speichern**
+   - FilaMan erkennt verfügbare Setting-IDs automatisch
+   - Klicken Sie auf "Settings in Spoolman speichern"
+   - Die Profile werden für zukünftige Drucke verwendet
+
+### Verbindung wiederherstellen
+
+- Bei Verbindungsproblemen klicken Sie den roten Punkt in der Menüleiste
+- Das System stellt automatisch eine neue Verbindung her
+
+---
+
+## Spoolman Integration
+
+### Automatische Funktionen
+
+1. **Spulen-Synchronisation**
+   - Automatische Übertragung von Gewichtsänderungen
+   - Echtzeit-Updates der Spulen-Daten
+
+2. **Extra-Felder**
+   - FilaMan erstellt automatisch erforderliche benutzerdefinierte Felder
+   - NFC-Tag-UID wird als Referenz gespeichert
+
+3. **Filterung**
+   - "Nur Spulen ohne NFC-Tag anzeigen" für einfache Tag-Zuordnung
+   - Kategorisierung nach Herstellern und Materialtypen
+
+### Spoolman Octoprint Plugin
+
+Für Octoprint-Benutzer ist eine automatische Spulen-Zuordnung verfügbar:
+
+1. **Plugin installieren**
+   ```
+   https://github.com/ManuelW77/OctoPrint-Spoolman-Filaman/archive/refs/heads/master.zip
+   ```
+
+2. **FilaMan konfigurieren**
+   - Aktivieren Sie "Send to Octo-Plugin"
+   - Geben Sie Octoprint-URL und API-Key ein
+
+3. **Automatische Zuordnung**
+   - Nach dem Wiegen wird die Spule automatisch in Octoprint aktiviert
+   - Unterstützt aktuell nur Tool0 (erste Düse)
+
+---
+
+## Hersteller Tags
+
+### Überblick
+
+Hersteller Tags ermöglichen es Filament-Produzenten, vorkonfigurierte NFC-Tags zu liefern, die automatisch alle notwendigen Einträge in Spoolman erstellen.
+
+### Erste Schritte mit Hersteller Tags
+
+1. **Tag scannen**
+   - Platzieren Sie die Spule mit dem Hersteller-Tag auf die Waage über dem NFC-Reader
+   - Bei Problemen beim Lesen: Spule etwas anders positionieren (nicht ganz an den Rand)
+   - Das System erkennt automatisch das Hersteller-Format
+
+2. **Automatische Erstellung**
+   - **Marke** wird in Spoolman angelegt (falls nicht vorhanden)
+   - **Filament-Typ** wird mit allen Spezifikationen erstellt
+   - **Spule** wird automatisch registriert
+
+3. **Zukünftige Scans**
+   - Nach der ersten Einrichtung nutzen Tags das Fast-Path-System
+   - Sofortige Gewichtsmessung ohne erneute Einrichtung
+
+### Unterstützte Hersteller
+
+- **RecyclingFabrik**: Erster offizieller Partner
+- Weitere Hersteller folgen
+
+### Vorteile
+
+- ✅ **Null manuelle Einrichtung**
+- ✅ **Perfekte Datengenauigkeit**
+- ✅ **Sofortige Integration**
+- ✅ **Zukunftssicher**
+
+---
+
+## Fehlerbehebung
+
+### Häufige Probleme
+
+#### WiFi-Verbindung
+
+**Problem**: Kann nicht mit FilaMan-Hotspot verbinden
+- Lösung: Stellen Sie sicher, dass der ESP32 gestartet ist
+- Alternative: Manuell zu http://192.168.4.1 navigieren
+
+**Problem**: Weboberfläche nicht erreichbar
+- Lösung: Prüfen Sie die IP-Adresse im Router
+- Alternative: Verwenden Sie http://filaman.local
+
+#### Waage
+
+**Problem**: Ungenaue Gewichtsmessungen
+- Lösung: Kalibrierung wiederholen
+- Tipp: Verwenden Sie "Tare Scale" für Nullstellung
+
+**Problem**: Wägezelle reagiert nicht
+- Lösung: Überprüfen Sie die Verkabelung (E+, E-, A+, A-)
+- Tipp: Testen Sie mit einem Multimeter
+
+#### NFC-Tags
+
+**Problem**: Tag wird nicht erkannt
+- Lösung: Überprüfen Sie die PN532 DIP-Schalter (I2C-Modus)
+- Tipp: Spule etwas anders auf der Waage positionieren (nicht ganz an den Rand)
+
+**Problem**: Tag kann nicht beschrieben werden
+- Lösung: Verwenden Sie NTAG215 für bessere Kompatibilität
+- Tipp: Stellen Sie sicher, dass der Tag nicht schreibgeschützt ist
+
+#### Spoolman
+
+**Problem**: Verbindung zu Spoolman schlägt fehl
+- Lösung: Aktivieren Sie SPOOLMAN_DEBUG_MODE=TRUE
+- Tipp: Überprüfen Sie die URL-Formatierung
+
+**Problem**: Spulen werden nicht angezeigt
+- Lösung: Stellen Sie sicher, dass Spoolman läuft
+- Tipp: Prüfen Sie die Netzwerk-Firewall-Einstellungen
+
+#### Bambu Lab
+
+**Problem**: Drucker verbindet nicht
+- Lösung: Überprüfen Sie Access Code und IP-Adresse
+- Tipp: Stellen Sie sicher, dass der Drucker im LAN-Modus ist
+
+**Problem**: AMS-Status wird nicht angezeigt
+- Lösung: Prüfen Sie die MQTT-Verbindung
+- Hinweis: Bambu kann die API jederzeit schließen
+
+### Debug-Informationen
+
+Falls Sie Probleme haben, können Sie diese Schritte zur Diagnose verwenden:
+
+#### Serieller Monitor (für Entwickler)
+- Verbinden Sie den ESP32 über USB mit Ihrem Computer
+- Öffnen Sie einen seriellen Monitor (z.B. Arduino IDE) mit 115200 Baud
+- Sie sehen detaillierte Log-Nachrichten des Systems
+
+#### Browser-Konsole
+- Öffnen Sie die Weboberfläche von FilaMan
+- Drücken Sie F12 um die Entwicklertools zu öffnen  
+- Schauen Sie in der Konsole nach Fehlermeldungen
+
+#### Neustart bei anhaltenden Problemen
+1. ESP32 vom Strom trennen
+2. 10 Sekunden warten
+3. Wieder anschließen
+4. 30 Sekunden für vollständigen Start warten
+
+---
+
+## Support
+
+### Community
+
+- **Discord Server**: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
+- **GitHub Issues**: [Filaman Repository](https://github.com/ManuelW77/Filaman/issues)
+- **YouTube Kanal**: [Deutsches Erklärvideo](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+
+### Dokumentation
+
+- **Offizielle Website**: [www.filaman.app](https://www.filaman.app)
+- **GitHub Wiki**: [Detaillierte Dokumentation](https://github.com/ManuelW77/Filaman/wiki)
+- **Hardware-Referenz**: ESP32 Pinout-Diagramme in `/img/`
+
+### Entwicklung unterstützen
+
+Wenn Sie das Projekt unterstützen möchten:
+
+[![Buy Me A Coffee](https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png)](https://www.buymeacoffee.com/manuelw)
+
+### Lizenz
+
+Dieses Projekt ist unter der MIT-Lizenz veröffentlicht. Siehe [LICENSE](LICENSE.txt) für Details.
+
+---
+
+**Letzte Aktualisierung**: August 2025
+**Version**: 2.0
+**Maintainer**: Manuel W.

WIKI_EN.md

@@ -0,0 +1,746 @@
+# FilaMan Wiki - English
+
+## Table of Contents
+
+1. [Overview](#overview)
+2. [Installation](#installation)
+3. [Hardware Requirements](#hardware-requirements)
+4. [Initial Setup](#initial-setup)
+5. [Configuration](#configuration)
+6. [Usage](#usage)
+7. [NFC Tags](#nfc-tags)
+8. [Bambu Lab Integration](#bambu-lab-integration)
+9. [Spoolman Integration](#spoolman-integration)
+10. [Octoprint Integration](#octoprint-integration)
+11. [Manufacturer Tags](#manufacturer-tags)
+12. [Troubleshooting](#troubleshooting)
+13. [Support](#support)
+
+---
+
+## Overview
+
+FilaMan is a comprehensive filament management system for 3D printers based on ESP32 hardware. It provides weight measurement, NFC tag management, and seamless integration with Spoolman and Bambu Lab 3D printers.
+
+### Key Features
+
+- **Precise weight measurement** with HX711 load cell amplifier
+- **NFC tag reading and writing** for filament identification
+- **OLED display** for status information
+- **WiFi connectivity** with easy configuration
+- **Web-based user interface** with real-time updates
+- **Spoolman integration** for inventory management
+- **Bambu Lab AMS control** via MQTT
+- **OpenSpool NFC format** compatibility
+- **Manufacturer tag support** for automatic setup
+
+### System Requirements
+
+- **ESP32 Development Board**
+- **Spoolman Instance** (required for full functionality)
+- **WiFi Network**
+- **Web Browser** (Chrome/Firefox/Safari)
+
+---
+
+## Installation
+
+### Easy Installation (Recommended)
+
+1. **Open the [FilaMan Web Installer](https://www.filaman.app/installer.html)**
+   - Use a Chrome-based browser
+
+2. **Prepare ESP32**
+   - Connect ESP32 via USB to your computer
+   - Click "Connect"
+
+3. **Select Port**
+   - Choose the appropriate USB port
+   - Confirm selection
+
+4. **Start Installation**
+   - Click "Install FilaMan"
+   - Wait for installation to complete
+
+### Manual Compilation
+
+For advanced users with PlatformIO:
+
+```bash
+git clone https://github.com/ManuelW77/Filaman.git
+cd FilaMan/esp32
+pio lib install
+pio run --target upload
+```
+
+---
+
+## Hardware Requirements
+
+### Required Components
+
+| Component | Description | Amazon Link (Affiliate) |
+|-----------|-------------|-------------------------|
+| ESP32 Development Board | Any ESP32 variant | [Amazon](https://amzn.to/3FHea6D) |
+| HX711 + Load Cell | 5kg Load Cell Amplifier | [Amazon](https://amzn.to/4ja1KTe) |
+| OLED Display | 0.96" I2C 128x64 SSD1306 | [Amazon](https://amzn.to/445aaa9) |
+| PN532 NFC Module | V3 RFID Module | [Amazon](https://amzn.eu/d/gy9vaBX) |
+| NFC Tags | NTAG213/NTAG215 | [Amazon](https://amzn.to/3E071xO) |
+| TTP223 Touch Sensor | Optional for tare function | [Amazon](https://amzn.to/4hTChMK) |
+
+### Pin Configuration
+
+| Component | ESP32 Pin | Function |
+|-----------|-----------|----------|
+| HX711 DOUT | 16 | Load cell data output |
+| HX711 SCK | 17 | Load cell clock |
+| OLED SDA | 21 | I2C data |
+| OLED SCL | 22 | I2C clock |
+| PN532 IRQ | 32 | Interrupt |
+| PN532 RESET | 33 | Reset |
+| PN532 SDA | 21 | I2C data (shared) |
+| PN532 SCL | 22 | I2C clock (shared) |
+| TTP223 I/O | 25 | Touch sensor (optional) |
+
+### Important Notes
+
+- **PN532 DIP switches** must be set to I2C mode
+- **3V pin** from ESP32 for touch sensor
+- **Load cell wiring**: E+ (red), E- (black), A- (white), A+ (green)
+
+![Wiring Diagram](./img/Schaltplan.png)
+
+---
+
+## Initial Setup
+
+### After Installation
+
+1. **ESP32 Restart**
+   - System automatically creates a WiFi hotspot "FilaMan"
+
+2. **WiFi Configuration**
+   - Connect to the "FilaMan" network
+   - Open browser (automatic portal or <http://192.168.4.1>)
+   - Configure your WiFi credentials
+
+3. **First Access**
+   - After successful WiFi connection, access system at <http://filaman.local>
+   - Alternative: Use IP address assigned by router
+
+### Spoolman Preparation
+
+**Important Note**: Spoolman must run in debug mode:
+
+```env
+# Uncomment in Spoolman's .env file:
+SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+This is required as Spoolman doesn't support CORS domain configuration yet.
+
+---
+
+## Configuration
+
+### Scale Calibration
+
+1. **Start Calibration**
+   - Go to "Scale" page
+   - Prepare a 500g reference weight (e.g., water glass)
+
+2. **Calibration Steps**
+   - Follow instructions on display
+   - Place weight when prompted
+   - Wait for calibration to complete
+
+3. **Validation**
+   - Test accuracy with known weights
+   - Use "Tare Scale" for zero adjustment if needed
+
+### Spoolman Connection
+
+1. **Enter Spoolman URL**
+   - Go to "Spoolman/Bambu" page
+   - Enter complete URL of your Spoolman instance
+   - Format: `http://spoolman-server:7912`
+
+2. **Test Connection**
+   - System automatically checks connection
+   - Successful connection shown by green status
+
+### Bambu Lab Printer (Optional)
+
+1. **Printer Settings**
+   - Open settings menu on your Bambu printer
+   - Note the following data:
+     - Printer IP address
+     - Access Code
+     - Serial Number
+
+2. **FilaMan Configuration**
+   - Enter printer data on "Spoolman/Bambu" page
+   - Enable "Auto Send to Bambu" for automatic AMS assignment
+
+3. **Auto-Send Timeout**
+   - Configure waiting time for automatic spool detection
+   - Recommended value: 10-30 seconds
+
+---
+
+## Usage
+
+### Basic Operation
+
+1. **Weigh Filament**
+   - Place spool on scale
+   - Weight automatically displayed on screen and web interface
+
+2. **Scan NFC Tag**
+   - Hold tag near PN532 module
+   - Recognized tags display spool information
+   - Weight automatically updated in Spoolman
+
+3. **Status Monitoring**
+   - **OLED Display** shows current weight and connection status
+   - **Web Interface** provides detailed information and control
+
+### Web Interface Navigation
+
+- **Home**: Main functions and current status
+- **Scale**: Scale calibration and settings
+- **Spoolman/Bambu**: System configuration
+- **Statistics**: Usage statistics (if enabled)
+
+---
+
+## NFC Tags
+
+### Supported Tag Types
+
+- **NTAG213**: 144 bytes (basic functions)
+- **NTAG215**: 504 bytes (recommended)
+- **NTAG216**: 888 bytes (extended functions)
+
+### Writing Tags
+
+1. **Prepare Spool in Spoolman**
+   - Create new spool in Spoolman
+   - Ensure all required data is entered
+
+2. **Start Tag Writing**
+   - Select spool from list
+   - Click "Write Tag"
+   - Display shows "Waiting for Tag"
+
+3. **Place Tag**
+   - Position NFC tag on PN532 module
+   - Wait for confirmation
+
+4. **Success Message**
+   - Successful writing shows checkmark
+   - Tag is now linked to Spoolman spool
+
+### Reading Tags
+
+1. **Scan Tag**
+   - Place the spool with NFC tag on the scale over the NFC reader
+   - If reading fails: Reposition spool slightly (not completely at the edge)
+   - Spool information automatically loaded
+
+2. **Automatic Updates**
+   - Current weight transferred to Spoolman
+   - Spool automatically selected in web interface
+
+---
+
+## Bambu Lab Integration
+
+### AMS (Automatic Material System)
+
+1. **Display AMS Status**
+   - Web interface shows current state of all AMS slots
+   - Loaded slots display filament information
+
+2. **Manual Filament Assignment**
+   - Select spool from Spoolman list
+   - Click corresponding AMS slot icon
+   - Filament assigned to slot
+
+3. **Automatic Assignment**
+   - After weighing with "Auto Send to Bambu" enabled
+   - System waits for new spools in AMS
+   - Calibrated filaments automatically assigned
+
+### Bambu Studio Integration
+
+1. **Sync Filament Profiles**
+   - Calibrate filaments in Bambu Studio
+   - Use Device → AMS → Pencil icon → Select
+
+2. **Save Setting IDs**
+   - FilaMan automatically detects available setting IDs
+   - Click "Save Settings to Spoolman"
+   - Profiles used for future prints
+
+### Restore Connection
+
+- For connection issues, click red dot in menu bar
+- System automatically establishes new connection
+
+---
+
+## Spoolman Integration
+
+### Automatic Functions
+
+1. **Spool Synchronization**
+   - Automatic transfer of weight changes
+   - Real-time updates of spool data
+
+2. **Extra Fields**
+   - FilaMan automatically creates required custom fields
+   - NFC tag UID stored as reference
+
+3. **Filtering**
+   - "Show only spools without NFC tag" for easy tag assignment
+   - Categorization by manufacturers and material types
+
+### Spoolman Octoprint Plugin
+
+For Octoprint users, automatic spool assignment is available:
+
+1. **Install Plugin**
+
+   ```text
+   https://github.com/ManuelW77/OctoPrint-Spoolman-Filaman/archive/refs/heads/master.zip
+   ```
+
+2. **Configure FilaMan**
+   - Enable "Send to Octo-Plugin"
+   - Enter Octoprint URL and API key
+
+3. **Automatic Assignment**
+   - After weighing, spool automatically activated in Octoprint
+   - Currently supports only Tool0 (first nozzle)
+
+---
+
+## Manufacturer Tags
+
+### Overview
+
+Manufacturer tags allow filament producers to provide pre-configured NFC tags that automatically create all necessary entries in Spoolman.
+
+### Getting Started with Manufacturer Tags
+
+1. **Scan Tag**
+   - Place spool with manufacturer tag on the scale over the NFC reader
+   - If reading fails: Reposition spool slightly (not completely at the edge)
+   - System automatically recognizes manufacturer format
+
+2. **Automatic Creation**
+   - **Brand** created in Spoolman (if not present)
+   - **Filament type** created with all specifications
+   - **Spool** automatically registered
+
+3. **Future Scans**
+   - After initial setup, tags use fast-path system
+   - Immediate weight measurement without re-setup
+
+### Supported Manufacturers
+
+- **RecyclingFabrik**: First official partner
+- More manufacturers coming soon
+
+### Benefits
+
+- ✅ **Zero manual setup**
+- ✅ **Perfect data accuracy**
+- ✅ **Instant integration**
+- ✅ **Future-proof**
+
+---
+
+## Troubleshooting
+
+### Common Issues
+
+#### WiFi Connection
+
+**Issue**: Cannot connect to FilaMan hotspot
+
+- Solution: Ensure ESP32 is started
+- Alternative: Manually navigate to <http://192.168.4.1>
+
+**Issue**: Web interface not accessible
+
+- Solution: Check IP address in router
+- Alternative: Use <http://filaman.local>
+
+#### Scale
+
+**Issue**: Inaccurate weight measurements
+
+- Solution: Repeat calibration
+- Tip: Use "Tare Scale" for zero adjustment
+
+**Issue**: Load cell not responding
+
+- Solution: Check wiring (E+, E-, A+, A-)
+- Tip: Test with multimeter
+
+#### NFC Tags
+
+**Issue**: Tag not recognized
+
+- Solution: Check PN532 DIP switches (I2C mode)
+- Tip: Reposition spool slightly on scale (not completely at the edge)
+
+**Issue**: Cannot write tag
+
+- Solution: Use NTAG215 for better compatibility
+- Tip: Ensure tag is not write-protected
+
+#### Spoolman
+
+**Issue**: Connection to Spoolman fails
+
+- Solution: Enable SPOOLMAN_DEBUG_MODE=TRUE
+- Tip: Check URL formatting
+
+**Issue**: Spools not displayed
+
+- Solution: Ensure Spoolman is running
+- Tip: Check network firewall settings
+
+#### Bambu Lab
+
+**Issue**: Printer won't connect
+
+- Solution: Check access code and IP address
+- Tip: Ensure printer is in LAN mode
+
+**Issue**: AMS status not displayed
+
+- Solution: Check MQTT connection
+- Note: Bambu may close API at any time
+
+### Debug Information
+
+If you have problems, you can use these steps for diagnosis:
+
+#### Serial Monitor (for developers)
+
+- Connect the ESP32 via USB to your computer
+- Open a serial monitor (e.g., Arduino IDE) with 115200 baud
+- You will see detailed log messages from the system
+
+#### Browser Console
+
+- Open the FilaMan web interface
+- Press F12 to open developer tools
+- Check the console for error messages
+
+---
+
+## Maintenance and Updates
+
+### Firmware Update
+
+1. **Via Web Interface**: Access `http://filaman.local/upgrade.html`
+2. **Select firmware file** (.bin format)
+3. **Upload** - System restarts automatically
+4. **Configuration preserved** - Settings remain intact
+
+### System Reset
+
+For persistent issues:
+
+1. Disconnect ESP32 from power
+2. Wait 10 seconds
+3. Reconnect
+4. Wait 30 seconds for complete startup
+
+---
+
+## Support and Information
+
+**Manufacturer**: Your Company Name
+**Maintainer**: Manuel W.
+
+### Scale Technology
+
+#### Weight Stabilization
+
+The system uses multiple filters for precise measurements:
+
+```cpp
+// Moving Average Filter with 8 values
+#define MOVING_AVERAGE_SIZE 8
+// Low-Pass Filter for smoothing
+#define LOW_PASS_ALPHA 0.3f
+// Thresholds for updates
+#define DISPLAY_THRESHOLD 0.3f    // Display update
+#define API_THRESHOLD 1.5f        // API actions
+```
+
+#### Calibration Algorithm
+
+1. **System Pause**: All tasks are temporarily paused
+2. **Zero Setting**: Tare scale without weight
+3. **Reference Measurement**: 500g weight for 10 measurements
+4. **Calculation**: `newValue = rawValue / SCALE_LEVEL_WEIGHT`
+5. **NVS Storage**: Permanent value with verification
+6. **Filter Reset**: New baseline for stabilization
+
+#### Auto-Tare Logic
+
+```cpp
+// Conditions for Auto-Tare
+if (autoTare && (weight > 2 && weight < 7) || weight < -2) {
+    scale_tare_counter++;
+    if (scale_tare_counter >= 5) {
+        // Automatic zero setting
+        scale.tare();
+        resetWeightFilter();
+    }
+}
+```
+
+### NFC Technology
+
+#### PN532 Communication
+
+- **Interface**: I2C at 400kHz
+- **IRQ Pin**: Interrupt-based tag detection
+- **Reset Handling**: Automatic recovery from communication errors
+- **DIP Switches**: Must be set to I2C mode (00)
+
+#### NDEF Implementation
+
+```json
+// FilaMan Spoolman Format (with sm_id)
+{
+  "sm_id": "123",
+  "color": "#FF5733",
+  "type": "PLA", 
+  "brand": "Example Brand"
+}
+```
+
+#### Manufacturer Tag Schema
+
+Compact JSON format for storage efficiency:
+
+```json
+{
+  "b": "RecyclingFabrik",           // brand
+  "an": "FX1_PLA-S175-1000-RED",  // article number
+  "t": "PLA",                      // type
+  "c": "FF0000",                   // color (hex without #)
+  "cn": "Red",                     // color name
+  "et": "210",                     // extruder temp
+  "bt": "60",                      // bed temp
+  "di": "1.75",                    // diameter
+  "de": "1.24",                    // density
+  "sw": "240",                      // spool weight
+  "u": "https://www.yoururl.com/search?q=" // URL used vor Brand Link and Filament Link
+}
+```
+
+### Display System
+
+#### OLED Architecture (SSD1306)
+
+- **Resolution**: 128x64 pixels monochrome
+- **Areas**:
+  - Status bar: 0-16 pixels (version, icons)
+  - Main area: 17-64 pixels (weight, messages)
+- **Update Interval**: 1 second for status line
+
+#### Icon System
+
+Bitmap icons for various states:
+
+```cpp
+// Status Icons (16x16 pixels)
+- icon_success: Checkmark for successful operations
+- icon_failed: X for errors
+- icon_transfer: Arrow for data transmission
+- icon_loading: Loading circle for ongoing operations
+
+// Connection Icons with strikethrough indicator
+- wifi_on/wifi_off: WLAN status
+- bambu_on: Bambu Lab connection
+- spoolman_on: Spoolman API status
+```
+
+### API Integration
+
+#### Spoolman REST API
+
+FilaMan interacts with the following endpoints:
+
+```http
+GET  /api/v1/spool/          # List spools
+POST /api/v1/spool/          # Create new spool
+PUT  /api/v1/spool/{id}/     # Update spool
+
+GET  /api/v1/vendor/         # List vendors
+POST /api/v1/vendor/         # Create new vendor
+
+GET  /api/v1/filament/       # List filaments
+POST /api/v1/filament/       # Create new filament
+```
+
+#### Request Handling
+
+```cpp
+// Sequential API processing
+enum spoolmanApiStateType {
+    API_IDLE = 0,
+    API_PROCESSING = 1,
+    API_ERROR = 2
+};
+```
+
+Prevents simultaneous API calls and deadlocks.
+
+#### Weight Update Logic
+
+```cpp
+// Conditions for Spoolman update
+if (activeSpoolId != "" && 
+    weigthCouterToApi > 3 &&    // 3+ stable measurements
+    weightSend == 0 &&          // Not yet sent
+    weight > 5 &&               // Minimum weight 5g
+    spoolmanApiState == API_IDLE) {
+    updateSpoolWeight(activeSpoolId, weight);
+}
+```
+
+### Bambu Lab MQTT
+
+#### Connection Parameters
+
+```cpp
+// SSL/TLS Configuration
+#define BAMBU_PORT 8883
+#define BAMBU_USERNAME "bblp"
+
+// Topic Structure
+String topic = "device/" + bambu_serial + "/report";
+String request_topic = "device/" + bambu_serial + "/request";
+```
+
+#### AMS Data Structure
+
+```cpp
+struct AMSData {
+    String tray_id;
+    String tray_type;
+    String tray_color;
+    String tray_material;
+    String setting_id;
+    String tray_info_idx;
+    bool has_spool;
+};
+```
+
+#### Auto-Send Mechanism
+
+```cpp
+// After tag recognition
+if (bambuCredentials.autosend_enable) {
+    autoSetToBambuSpoolId = activeSpoolId.toInt();
+    // Countdown starts automatically
+    // Waits for new spool in AMS
+}
+```
+
+### WebSocket Communication
+
+#### Message Types
+
+```javascript
+// Client → Server
+{
+  "type": "writeNfcTag",
+  "tagType": "spool",
+  "payload": { /* JSON data */ }
+}
+
+{
+  "type": "scale",
+  "payload": "tare|calibrate|setAutoTare",
+  "enabled": true
+}
+
+// Server → Client
+{
+  "type": "heartbeat",
+  "freeHeap": 245,
+  "bambu_connected": true,
+  "spoolman_connected": true
+}
+
+{
+  "type": "amsData",
+  "data": [ /* AMS array */ ]
+}
+```
+
+#### Connection Management
+
+- **Auto-Reconnect**: Client-side reconnection
+- **Heartbeat**: Every 30 seconds for connection monitoring
+- **Cleanup**: Automatic removal of dead connections
+
+### Watchdog and Error Handling
+
+#### System Watchdog
+
+```cpp
+// WDT Configuration
+esp_task_wdt_init(10, true);  // 10s timeout, panic on overflow
+esp_task_wdt_add(NULL);       // Add current task
+```
+
+#### Error Recovery
+
+- **NFC Reset**: Automatic PN532 restart on communication errors
+- **MQTT Reconnect**: Bambu Lab connection automatically restored
+- **WiFi Monitoring**: Connection check every 60 seconds
+
+---
+
+## Support
+
+### Community
+
+- **Discord Server**: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
+- **GitHub Issues**: [Filaman Repository](https://github.com/ManuelW77/Filaman/issues)
+- **YouTube Channel**: [German explanation video](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+
+### Documentation
+
+- **Official Website**: [www.filaman.app](https://www.filaman.app)
+- **GitHub Wiki**: [Detailed documentation](https://github.com/ManuelW77/Filaman/wiki)
+- **Hardware Reference**: ESP32 pinout diagrams in `/img/`
+
+### Support Development
+
+If you'd like to support the project:
+
+[![Buy Me A Coffee](https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png)](https://www.buymeacoffee.com/manuelw)
+
+### License
+
+This project is released under the MIT License. See [LICENSE](LICENSE.txt) for details.
+
+---
+
+**Last Updated**: August 2025  
+**Version**: 2.0  
+**Maintainer**: Manuel W.

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "2.0.0-beta8"
+version = "2.0.1"
 to_old_version = "1.5.10"
 
 ##

src/api.cpp

@@ -124,28 +124,69 @@ void sendToApi(void *parameter) {
     String octoToken = params->octoToken;
     bool triggerWeightUpdate = params->triggerWeightUpdate;
     String spoolIdForWeight = params->spoolIdForWeight;
-    uint16_t weightValue = params->weightValue;    
+    uint16_t weightValue = params->weightValue;
 
-    HTTPClient http;
-    http.setReuse(false);
+    // Retry mechanism with configurable parameters
+    const uint8_t MAX_RETRIES = 3;
+    const uint16_t RETRY_DELAY_MS = 1000; // 1 second between retries
+    const uint16_t HTTP_TIMEOUT_MS = 10000; // 10 second HTTP timeout
+    
+    bool success = false;
+    int httpCode = -1;
+    String responsePayload = "";
+    
+    // Try request with retries
+    for (uint8_t attempt = 1; attempt <= MAX_RETRIES && !success; attempt++) {
+        Serial.printf("API Request attempt %d/%d to: %s\n", attempt, MAX_RETRIES, spoolsUrl.c_str());
+        
+        HTTPClient http;
+        http.setReuse(false);
+        http.setTimeout(HTTP_TIMEOUT_MS); // Set HTTP timeout
+        
+        http.begin(spoolsUrl);
+        http.addHeader("Content-Type", "application/json");
+        if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
 
-    http.begin(spoolsUrl);
-    http.addHeader("Content-Type", "application/json");
-    if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
+        // Execute HTTP request based on type
+        if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
+        else if (httpType == "POST") httpCode = http.POST(updatePayload);
+        else if (httpType == "GET") httpCode = http.GET();
+        else httpCode = http.PUT(updatePayload);
 
-    int httpCode;
-    if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
-    else if (httpType == "POST") httpCode = http.POST(updatePayload);
-    else if (httpType == "GET") httpCode = http.GET();
-    else httpCode = http.PUT(updatePayload);
+        // Check if request was successful
+        if (httpCode == HTTP_CODE_OK || httpCode == HTTP_CODE_CREATED) {
+            responsePayload = http.getString();
+            success = true;
+            Serial.printf("API Request successful on attempt %d, HTTP Code: %d\n", attempt, httpCode);
+        } else {
+            Serial.printf("API Request failed on attempt %d, HTTP Code: %d (%s)\n", 
+                         attempt, httpCode, http.errorToString(httpCode).c_str());
+            
+            // Don't retry on certain error codes (client errors)
+            if (httpCode >= 400 && httpCode < 500 && httpCode != 408 && httpCode != 429) {
+                Serial.println("Client error detected, stopping retries");
+                break;
+            }
+            
+            // Wait before retry (except on last attempt)
+            if (attempt < MAX_RETRIES) {
+                Serial.printf("Waiting %dms before retry...\n", RETRY_DELAY_MS);
+                http.end();
+                vTaskDelay(RETRY_DELAY_MS / portTICK_PERIOD_MS);
+                continue;
+            }
+        }
+        
+        http.end();
+    }
 
-    if (httpCode == HTTP_CODE_OK) {
+    // Process successful response
+    if (success) {
         Serial.println("Spoolman Abfrage erfolgreich");
 
         // Restgewicht der Spule auslesen
-        String payload = http.getString();
         JsonDocument doc;
-        DeserializationError error = deserializeJson(doc, payload);
+        DeserializationError error = deserializeJson(doc, responsePayload);
         if (error) {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
@@ -225,10 +266,9 @@ void sendToApi(void *parameter) {
     } else if (httpCode == HTTP_CODE_CREATED) {
         Serial.println("Spoolman erfolgreich erstellt");
         
-        // Parse response for created resources
-        String payload = http.getString();
+        // Parse response for created resources  
         JsonDocument doc;
-        DeserializationError error = deserializeJson(doc, payload);
+        DeserializationError error = deserializeJson(doc, responsePayload);
         if (error) {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
@@ -280,14 +320,17 @@ void sendToApi(void *parameter) {
             Serial.println(weightPayload);
 
             // Execute weight update
-            http.begin(weightUrl);
-            http.addHeader("Content-Type", "application/json");
+            HTTPClient weightHttp;
+            weightHttp.setReuse(false);
+            weightHttp.setTimeout(HTTP_TIMEOUT_MS);
+            weightHttp.begin(weightUrl);
+            weightHttp.addHeader("Content-Type", "application/json");
             
-            int weightHttpCode = http.PUT(weightPayload);
+            int weightHttpCode = weightHttp.PUT(weightPayload);
             
             if (weightHttpCode == HTTP_CODE_OK) {
                 Serial.println("Weight update successful");
-                String weightResponse = http.getString();
+                String weightResponse = weightHttp.getString();
                 JsonDocument weightResponseDoc;
                 DeserializationError weightError = deserializeJson(weightResponseDoc, weightResponse);
                 
@@ -310,6 +353,7 @@ void sendToApi(void *parameter) {
                 oledShowProgressBar(1, 1, "Failure!", "Weight update");
             }
             
+            weightHttp.end();
             weightDoc.clear();
         }
     } else {
@@ -325,14 +369,25 @@ void sendToApi(void *parameter) {
         case API_REQUEST_BAMBU_UPDATE:
             oledShowProgressBar(1, 1, "Failure!", "Bambu update");
             break;
+        case API_REQUEST_VENDOR_CHECK:
+            oledShowProgressBar(1, 1, "Failure!", "Vendor check");
+            foundVendorId = 0; // Set to 0 to indicate error/not found
+            break;
         case API_REQUEST_VENDOR_CREATE:
             oledShowProgressBar(1, 1, "Failure!", "Vendor create");
+            createdVendorId = 0; // Set to 0 to indicate error
+            break;
+        case API_REQUEST_FILAMENT_CHECK:
+            oledShowProgressBar(1, 1, "Failure!", "Filament check");
+            foundFilamentId = 0; // Set to 0 to indicate error/not found
             break;
         case API_REQUEST_FILAMENT_CREATE:
             oledShowProgressBar(1, 1, "Failure!", "Filament create");
+            createdFilamentId = 0; // Set to 0 to indicate error
             break;
         case API_REQUEST_SPOOL_CREATE:
             oledShowProgressBar(1, 1, "Failure!", "Spool create");
+            createdSpoolId = 0; // Set to 0 to indicate error instead of hanging
             break;
         }
         Serial.println("Fehler beim Senden an Spoolman! HTTP Code: " + String(httpCode));
@@ -340,7 +395,6 @@ void sendToApi(void *parameter) {
         nfcReaderState = NFC_IDLE; // Reset NFC state to allow retry
     }
 
-    http.end();
     vTaskDelay(50 / portTICK_PERIOD_MS);
 
     // Speicher freigeben
@@ -952,6 +1006,13 @@ uint16_t createSpool(uint16_t vendorId, uint16_t filamentId, JsonDocument& paylo
     while(createdSpoolId == 65535) {
         vTaskDelay(50 / portTICK_PERIOD_MS);
     }
+    
+    // Check if spool creation was successful
+    if (createdSpoolId == 0) {
+        Serial.println("ERROR: Spool creation failed");
+        nfcReaderState = NFC_IDLE; // Reset NFC state
+        return 0;
+    }
 
     // Write data to tag with startWriteJsonToTag
     // void startWriteJsonToTag(const bool isSpoolTag, const char* payload);

src/main.cpp

@@ -178,9 +178,11 @@ void loop() {
     // Ausgabe der Waage auf Display
     if(pauseMainTask == 0)
     {
+      // Use filtered weight for smooth display, but still check API weight for significant changes
+      int16_t displayWeight = getFilteredDisplayWeight();
       if (mainTaskWasPaused || (weight != lastWeight && nfcReaderState == NFC_IDLE && (!bambuCredentials.autosend_enable || autoSetToBambuSpoolId == 0)))
       {
-        (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+        (displayWeight < 2) ? ((displayWeight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(displayWeight);
       }
       mainTaskWasPaused = false;
     }
@@ -250,6 +252,25 @@ void loop() {
       }
     }
 
+    // Handle successful tag write: Send weight to Spoolman but NEVER auto-send to Bambu
+    if (activeSpoolId != "" && weigthCouterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false && spoolmanApiState == API_IDLE) 
+    {
+      // set the current tag as processed to prevent it beeing processed again
+      tagProcessed = true;
+
+      if (updateSpoolWeight(activeSpoolId, weight)) 
+      {
+        weightSend = 1;
+        Serial.println("Tag written: Weight sent to Spoolman, but NO auto-send to Bambu");
+        // INTENTIONALLY do NOT set autoSetToBambuSpoolId here to prevent Bambu auto-send
+      }
+      else
+      {
+        oledShowIcon("failed");
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+      }
+    }
+
     if(octoEnabled && sendOctoUpdate && spoolmanApiState == API_IDLE)
     {
       updateSpoolOcto(autoSetToBambuSpoolId);

src/nfc.cpp

@@ -1299,6 +1299,61 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
   return true;
 }
 
+// Read complete JSON data for fast-path to enable web interface display
+bool readCompleteJsonForFastPath() {
+    Serial.println("=== FAST-PATH: Reading complete JSON for web interface ===");
+    
+    // Read tag size first
+    uint16_t tagSize = readTagSize();
+    if (tagSize == 0) {
+        Serial.println("FAST-PATH: Could not determine tag size");
+        return false;
+    }
+    
+    // Create buffer for complete data
+    uint8_t* data = (uint8_t*)malloc(tagSize);
+    if (!data) {
+        Serial.println("FAST-PATH: Could not allocate memory for complete read");
+        return false;
+    }
+    memset(data, 0, tagSize);
+    
+    // Read all pages
+    uint8_t numPages = tagSize / 4;
+    for (uint8_t i = 4; i < 4 + numPages; i++) {
+        if (!robustPageRead(i, data + (i - 4) * 4)) {
+            Serial.printf("FAST-PATH: Failed to read page %d\n", i);
+            free(data);
+            return false;
+        }
+        
+        // Check for NDEF message end
+        if (data[(i - 4) * 4] == 0xFE) {
+            Serial.println("FAST-PATH: Found NDEF message end marker");
+            break;
+        }
+        
+        yield();
+        esp_task_wdt_reset();
+        vTaskDelay(pdMS_TO_TICKS(2));
+    }
+    
+    // Decode NDEF and extract JSON
+    bool success = decodeNdefAndReturnJson(data, ""); // Empty UID string for fast-path
+    
+    free(data);
+    
+    if (success) {
+        Serial.println("✓ FAST-PATH: Complete JSON data successfully loaded");
+        Serial.print("nfcJsonData length: ");
+        Serial.println(nfcJsonData.length());
+    } else {
+        Serial.println("✗ FAST-PATH: Failed to decode complete JSON data");
+    }
+    
+    return success;
+}
+
 bool quickSpoolIdCheck(String uidString) {
     // Fast-path: Read NDEF structure to quickly locate and check JSON payload
     // This dramatically speeds up known spool recognition
@@ -1436,6 +1491,14 @@ bool quickSpoolIdCheck(String uidString) {
                     activeSpoolId = quickSpoolId;
                     lastSpoolId = activeSpoolId;
                     
+                    // Read complete JSON data for web interface display
+                    Serial.println("FAST-PATH: Reading complete JSON data for web interface...");
+                    if (readCompleteJsonForFastPath()) {
+                        Serial.println("✓ FAST-PATH: Complete JSON data loaded for web interface");
+                    } else {
+                        Serial.println("⚠ FAST-PATH: Could not read complete JSON, web interface may show limited data");
+                    }
+                    
                     oledShowProgressBar(2, octoEnabled?5:4, "Known Spool", "Quick mode");
                     Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
                     return true;
@@ -1483,6 +1546,14 @@ bool quickSpoolIdCheck(String uidString) {
                 activeSpoolId = quickSpoolId;
                 lastSpoolId = activeSpoolId;
                 
+                // Read complete JSON data for web interface display
+                Serial.println("FAST-PATH: Reading complete JSON data for web interface...");
+                if (readCompleteJsonForFastPath()) {
+                    Serial.println("✓ FAST-PATH: Complete JSON data loaded for web interface");
+                } else {
+                    Serial.println("⚠ FAST-PATH: Could not read complete JSON, web interface may show limited data");
+                }
+                
                 oledShowProgressBar(2, octoEnabled?5:4, "Known Spool", "Quick mode");
                 Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
                 return true;
@@ -1529,6 +1600,10 @@ void writeJsonToTag(void *parameter) {
   // aktualisieren der Website wenn sich der Status ändert
   sendNfcData();
   vTaskDelay(100 / portTICK_PERIOD_MS);
+  
+  // Show waiting message for tag detection
+  oledShowProgressBar(0, 1, "Write Tag", "Warte auf Tag");
+  
   // Wait 10sec for tag
   uint8_t success = 0;
   String uidString = "";

src/nfc.h

@@ -17,6 +17,7 @@ void startNfc();
 void scanRfidTask(void * parameter);
 void startWriteJsonToTag(const bool isSpoolTag, const char* payload);
 bool quickSpoolIdCheck(String uidString);
+bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
 
 extern TaskHandle_t RfidReaderTask;
 extern String nfcJsonData;

src/scale.cpp

@@ -13,6 +13,21 @@ TaskHandle_t ScaleTask;
 
 int16_t weight = 0;
 
+// Weight stabilization variables
+#define MOVING_AVERAGE_SIZE 8           // Reduced from 20 to 8 for faster response
+#define LOW_PASS_ALPHA 0.3f            // Increased from 0.15 to 0.3 for faster tracking
+#define DISPLAY_THRESHOLD 0.3f         // Reduced from 0.5 to 0.3g for more responsive display
+#define API_THRESHOLD 1.5f             // Reduced from 2.0 to 1.5g for faster API actions
+#define MEASUREMENT_INTERVAL_MS 30     // Reduced from 50ms to 30ms for faster updates
+
+float weightBuffer[MOVING_AVERAGE_SIZE];
+uint8_t bufferIndex = 0;
+bool bufferFilled = false;
+float filteredWeight = 0.0f;
+int16_t lastDisplayedWeight = 0;
+int16_t lastStableWeight = 0;        // For API/action triggering
+unsigned long lastMeasurementTime = 0;
+
 uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 bool scaleTareRequest = false;
@@ -21,6 +36,93 @@ bool scaleCalibrated;
 bool autoTare = true;
 bool scaleCalibrationActive = false;
 
+// ##### Weight stabilization functions #####
+
+/**
+ * Reset weight filter buffer - call after tare or calibration
+ */
+void resetWeightFilter() {
+  bufferIndex = 0;
+  bufferFilled = false;
+  filteredWeight = 0.0f;
+  lastDisplayedWeight = 0;
+  lastStableWeight = 0;            // Reset stable weight for API actions
+  
+  // Initialize buffer with zeros
+  for (int i = 0; i < MOVING_AVERAGE_SIZE; i++) {
+    weightBuffer[i] = 0.0f;
+  }
+}
+
+/**
+ * Calculate moving average from weight buffer
+ */
+float calculateMovingAverage() {
+  float sum = 0.0f;
+  int count = bufferFilled ? MOVING_AVERAGE_SIZE : bufferIndex;
+  
+  for (int i = 0; i < count; i++) {
+    sum += weightBuffer[i];
+  }
+  
+  return (count > 0) ? sum / count : 0.0f;
+}
+
+/**
+ * Apply low-pass filter to smooth weight readings
+ * Uses exponential smoothing: y_new = alpha * x_new + (1-alpha) * y_old
+ */
+float applyLowPassFilter(float newValue) {
+  filteredWeight = LOW_PASS_ALPHA * newValue + (1.0f - LOW_PASS_ALPHA) * filteredWeight;
+  return filteredWeight;
+}
+
+/**
+ * Process new weight reading with stabilization
+ * Returns stabilized weight value
+ */
+int16_t processWeightReading(float rawWeight) {
+  // Add to moving average buffer
+  weightBuffer[bufferIndex] = rawWeight;
+  bufferIndex = (bufferIndex + 1) % MOVING_AVERAGE_SIZE;
+  
+  if (bufferIndex == 0) {
+    bufferFilled = true;
+  }
+  
+  // Calculate moving average
+  float avgWeight = calculateMovingAverage();
+  
+  // Apply low-pass filter
+  float smoothedWeight = applyLowPassFilter(avgWeight);
+  
+  // Round to nearest gram
+  int16_t newWeight = round(smoothedWeight);
+  
+  // Update displayed weight if display threshold is reached
+  if (abs(newWeight - lastDisplayedWeight) >= DISPLAY_THRESHOLD) {
+    lastDisplayedWeight = newWeight;
+  }
+  
+  // Update global weight for API actions only if stable threshold is reached
+  int16_t weightToReturn = weight; // Default: keep current weight
+  
+  if (abs(newWeight - lastStableWeight) >= API_THRESHOLD) {
+    lastStableWeight = newWeight;
+    weightToReturn = newWeight;
+  }
+  
+  return weightToReturn;
+}
+
+/**
+ * Get current filtered weight for display purposes
+ * This returns the smoothed weight even if it hasn't triggered API actions
+ */
+int16_t getFilteredDisplayWeight() {
+  return lastDisplayedWeight;
+}
+
 // ##### Funktionen für Waage #####
 uint8_t setAutoTare(bool autoTareValue) {
   Serial.print("Set AutoTare to ");
@@ -39,6 +141,7 @@ uint8_t setAutoTare(bool autoTareValue) {
 uint8_t tareScale() {
   Serial.println("Tare scale");
   scale.tare();
+  resetWeightFilter(); // Reset stabilization filter after tare
   
   return 1;
 }
@@ -48,37 +151,61 @@ void scale_loop(void * parameter) {
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
 
+  // Initialize weight filter
+  resetWeightFilter();
+  lastMeasurementTime = millis();
+
   for(;;) {
-    if (scale.is_ready()) 
-    {
-      // Waage automatisch Taren, wenn zu lange Abweichung
-      if (autoTare && scale_tare_counter >= 5) 
+    unsigned long currentTime = millis();
+    
+    // Only measure at defined intervals to reduce noise
+    if (currentTime - lastMeasurementTime >= MEASUREMENT_INTERVAL_MS) {
+      if (scale.is_ready()) 
       {
-        Serial.println("Auto Tare scale");
-        scale.tare();
-        scale_tare_counter = 0;
-      }
+        // Waage automatisch Taren, wenn zu lange Abweichung
+        if (autoTare && scale_tare_counter >= 5) 
+        {
+          Serial.println("Auto Tare scale");
+          scale.tare();
+          resetWeightFilter(); // Reset filter after auto tare
+          scale_tare_counter = 0;
+        }
 
-      // Waage manuell Taren
-      if (scaleTareRequest == true) 
-      {
-        Serial.println("Re-Tare scale");
-        oledShowMessage("TARE Scale");
-        vTaskDelay(pdMS_TO_TICKS(1000));
-        scale.tare();
-        vTaskDelay(pdMS_TO_TICKS(1000));
-        oledShowWeight(0);
-        scaleTareRequest = false;
-      }
+        // Waage manuell Taren
+        if (scaleTareRequest == true) 
+        {
+          Serial.println("Re-Tare scale");
+          oledShowMessage("TARE Scale");
+          vTaskDelay(pdMS_TO_TICKS(1000));
+          scale.tare();
+          resetWeightFilter(); // Reset filter after manual tare
+          vTaskDelay(pdMS_TO_TICKS(1000));
+          oledShowWeight(0);
+          scaleTareRequest = false;
+        }
 
-      // Only update weight if median changed more than 1
-      int16_t newWeight = round(scale.get_units());
-      if(abs(weight-newWeight) > 1){
-        weight = newWeight;
+        // Get raw weight reading
+        float rawWeight = scale.get_units();
+        
+        // Process weight with stabilization
+        int16_t stabilizedWeight = processWeightReading(rawWeight);
+        
+        // Update global weight variable only if it changed significantly (for API actions)
+        if (stabilizedWeight != weight) {
+          weight = stabilizedWeight;
+        }
+        
+        // Debug output for monitoring (can be removed in production)
+        static unsigned long lastDebugTime = 0;
+        if (currentTime - lastDebugTime > 2000) { // Print every 2 seconds
+          lastDebugTime = currentTime;
+        }
+        
+        lastMeasurementTime = currentTime;
       }
     }
     
-    vTaskDelay(pdMS_TO_TICKS(100));
+    vTaskDelay(pdMS_TO_TICKS(10)); // Shorter delay for more responsive loop
   }
 }
 
@@ -125,6 +252,9 @@ void start_scale(bool touchSensorConnected) {
   //vTaskDelay(pdMS_TO_TICKS(5000));
   //scale.tare();
 
+  // Initialize weight stabilization filter
+  resetWeightFilter();
+
   // Display Gewicht
   oledShowWeight(0);
 
@@ -209,6 +339,7 @@ uint8_t calibrate_scale() {
       oledShowProgressBar(2, 3, "Scale Cal.", "Remove weight");
 
       scale.set_scale(newCalibrationValue);
+      resetWeightFilter(); // Reset filter after calibration
       for (uint16_t i = 0; i < 2000; i++) {
         yield();
         vTaskDelay(pdMS_TO_TICKS(1));

src/scale.h

@@ -9,6 +9,13 @@ uint8_t start_scale(bool touchSensorConnected);
 uint8_t calibrate_scale();
 uint8_t tareScale();
 
+// Weight stabilization functions
+void resetWeightFilter();
+float calculateMovingAverage();
+float applyLowPassFilter(float newValue);
+int16_t processWeightReading(float rawWeight);
+int16_t getFilteredDisplayWeight();
+
 extern HX711 scale;
 extern int16_t weight;
 extern uint8_t weigthCouterToApi;