docs: add German and English wiki documentation
This commit is contained in:
3
.gitignore
vendored
3
.gitignore
vendored
@@ -39,4 +39,5 @@ _local/*
|
||||
website/*
|
||||
release.sh
|
||||
.github/copilot-instructions.md
|
||||
data
|
||||
data
|
||||
wiki
|
||||
468
WIKI_DE.md
Normal file
468
WIKI_DE.md
Normal file
@@ -0,0 +1,468 @@
|
||||
# FilaMan Wiki - Deutsch
|
||||
|
||||
## Inhaltsverzeichnis
|
||||
|
||||
1. [Überblick](#überblick)
|
||||
2. [Installation](#installation)
|
||||
3. [Hardware-Anforderungen](#hardware-anforderungen)
|
||||
4. [Ersteinrichtung](#ersteinrichtung)
|
||||
5. [Konfiguration](#konfiguration)
|
||||
6. [Benutzung](#benutzung)
|
||||
7. [NFC-Tags](#nfc-tags)
|
||||
8. [Bambu Lab Integration](#bambu-lab-integration)
|
||||
9. [Spoolman Integration](#spoolman-integration)
|
||||
10. [Octoprint Integration](#octoprint-integration)
|
||||
11. [Hersteller Tags](#hersteller-tags)
|
||||
12. [Fehlerbehebung](#fehlerbehebung)
|
||||
13. [Support](#support)
|
||||
|
||||
---
|
||||
|
||||
## Überblick
|
||||
|
||||
FilaMan ist ein umfassendes Filament-Managementsystem für 3D-Drucker, das auf ESP32-Hardware basiert. Es bietet Gewichtsmessung, NFC-Tag-Management und nahtlose Integration mit Spoolman und Bambu Lab 3D-Druckern.
|
||||
|
||||
### Hauptfunktionen
|
||||
|
||||
- **Präzise Gewichtsmessung** mit HX711 Wägezellen-Verstärker
|
||||
- **NFC-Tag Lesen und Schreiben** für Filament-Identifikation
|
||||
- **OLED-Display** für Status-Anzeigen
|
||||
- **WiFi-Konnektivität** mit einfacher Konfiguration
|
||||
- **Webbasierte Benutzeroberfläche** mit Echtzeit-Updates
|
||||
- **Spoolman-Integration** für Lagerverwaltung
|
||||
- **Bambu Lab AMS-Steuerung** via MQTT
|
||||
- **Openspool NFC-Format** Kompatibilität
|
||||
- **Hersteller Tag Unterstützung** für automatische Einrichtung
|
||||
|
||||
### Systemvoraussetzungen
|
||||
|
||||
- **ESP32 Development Board**
|
||||
- **Spoolman Instanz** (erforderlich für volle Funktionalität)
|
||||
- **WiFi-Netzwerk**
|
||||
- **Webbrowser** (Chrome/Firefox/Safari)
|
||||
|
||||
---
|
||||
|
||||
## Installation
|
||||
|
||||
### Einfache Installation (Empfohlen)
|
||||
|
||||
1. **Öffnen Sie den [FilaMan Web-Installer](https://www.filaman.app/installer.html)**
|
||||
- Verwenden Sie einen Chrome-basierten Browser
|
||||
|
||||
2. **ESP32 vorbereiten**
|
||||
- Verbinden Sie den ESP32 über USB mit Ihrem Computer
|
||||
- Klicken Sie auf "Connect"
|
||||
|
||||
3. **Port auswählen**
|
||||
- Wählen Sie den entsprechenden USB-Port aus
|
||||
- Bestätigen Sie die Auswahl
|
||||
|
||||
4. **Installation starten**
|
||||
- Klicken Sie auf "FilaMan installieren"
|
||||
- Warten Sie, bis der Installationsvorgang abgeschlossen ist
|
||||
|
||||
### Manuelle Kompilierung
|
||||
|
||||
Für erfahrene Benutzer mit PlatformIO:
|
||||
|
||||
```bash
|
||||
git clone https://github.com/ManuelW77/Filaman.git
|
||||
cd FilaMan/esp32
|
||||
pio lib install
|
||||
pio run --target upload
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Hardware-Anforderungen
|
||||
|
||||
### Erforderliche Komponenten
|
||||
|
||||
| Komponente | Beschreibung | Amazon Link (Affiliate) |
|
||||
|------------|--------------|-------------------------|
|
||||
| ESP32 Development Board | Jede ESP32-Variante | [Amazon](https://amzn.to/3FHea6D) |
|
||||
| HX711 + Wägezelle | 5kg Load Cell Amplifier | [Amazon](https://amzn.to/4ja1KTe) |
|
||||
| OLED Display | 0.96" I2C 128x64 SSD1306 | [Amazon](https://amzn.to/445aaa9) |
|
||||
| PN532 NFC Modul | V3 RFID-Modul | [Amazon](https://amzn.eu/d/gy9vaBX) |
|
||||
| NFC Tags | NTAG213/NTAG215 | [Amazon](https://amzn.to/3E071xO) |
|
||||
| TTP223 Touch Sensor | Optional für Tara-Funktion | [Amazon](https://amzn.to/4hTChMK) |
|
||||
|
||||
### Pin-Konfiguration
|
||||
|
||||
| Komponente | ESP32 Pin | Funktion |
|
||||
|------------|-----------|----------|
|
||||
| HX711 DOUT | 16 | Datenausgang Wägezelle |
|
||||
| HX711 SCK | 17 | Takt Wägezelle |
|
||||
| OLED SDA | 21 | I2C Daten |
|
||||
| OLED SCL | 22 | I2C Takt |
|
||||
| PN532 IRQ | 32 | Interrupt |
|
||||
| PN532 RESET | 33 | Reset |
|
||||
| PN532 SDA | 21 | I2C Daten (geteilt) |
|
||||
| PN532 SCL | 22 | I2C Takt (geteilt) |
|
||||
| TTP223 I/O | 25 | Touch-Sensor (optional) |
|
||||
|
||||
### Wichtige Hinweise
|
||||
|
||||
- **PN532 DIP-Schalter** müssen auf I2C-Modus eingestellt sein
|
||||
- **3V Pin** vom ESP32 für Touch-Sensor verwenden
|
||||
- **Wägezellen-Verkabelung**: E+ (rot), E- (schwarz), A- (weiß), A+ (grün)
|
||||
|
||||
|
||||
|
||||
---
|
||||
|
||||
## Ersteinrichtung
|
||||
|
||||
### Nach der Installation
|
||||
|
||||
1. **ESP32 Neustart**
|
||||
- Das System erstellt automatisch einen WiFi-Hotspot "FilaMan"
|
||||
|
||||
2. **WiFi-Konfiguration**
|
||||
- Verbinden Sie sich mit dem "FilaMan" Netzwerk
|
||||
- Öffnen Sie einen Browser (automatisches Portal oder http://192.168.4.1)
|
||||
- Konfigurieren Sie Ihre WiFi-Zugangsdaten
|
||||
|
||||
3. **Erster Zugriff**
|
||||
- Nach erfolgreicher WiFi-Verbindung ist das System unter http://filaman.local erreichbar
|
||||
- Alternativ über die vom Router zugewiesene IP-Adresse
|
||||
|
||||
### Spoolman Vorbereitung
|
||||
|
||||
**Wichtiger Hinweis**: Spoolman muss im Debug-Modus laufen:
|
||||
|
||||
```env
|
||||
# In der .env Datei von Spoolman auskommentieren:
|
||||
SPOOLMAN_DEBUG_MODE=TRUE
|
||||
```
|
||||
|
||||
Dies ist erforderlich, da Spoolman noch keine CORS-Domain-Konfiguration unterstützt.
|
||||
|
||||
---
|
||||
|
||||
## Konfiguration
|
||||
|
||||
### Waagen-Kalibrierung
|
||||
|
||||
1. **Kalibrierung starten**
|
||||
- Gehen Sie zur "Scale" (Waage) Seite
|
||||
- Bereiten Sie ein 500g Referenzgewicht vor (z.B. Wasserglas)
|
||||
|
||||
2. **Kalibrierungsschritte**
|
||||
- Folgen Sie den Anweisungen auf dem Display
|
||||
- Legen Sie das Gewicht auf, wenn gefordert
|
||||
- Warten Sie, bis die Kalibrierung abgeschlossen ist
|
||||
|
||||
3. **Validierung**
|
||||
- Testen Sie die Genauigkeit mit bekannten Gewichten
|
||||
- Bei Bedarf "Tare Scale" für Nullstellung verwenden
|
||||
|
||||
### Spoolman-Verbindung
|
||||
|
||||
1. **Spoolman-URL eingeben**
|
||||
- Gehen Sie zur "Spoolman/Bambu" Seite
|
||||
- Geben Sie die vollständige URL Ihrer Spoolman-Instanz ein
|
||||
- Format: `http://spoolman-server:7912`
|
||||
|
||||
2. **Verbindung testen**
|
||||
- Das System prüft automatisch die Verbindung
|
||||
- Erfolgreiche Verbindung wird durch grünen Status angezeigt
|
||||
|
||||
### Bambu Lab Drucker (optional)
|
||||
|
||||
1. **Drucker-Einstellungen**
|
||||
- Öffnen Sie das Einstellungsmenü auf Ihrem Bambu-Drucker
|
||||
- Notieren Sie sich die folgenden Daten:
|
||||
- IP-Adresse des Druckers
|
||||
- Access Code
|
||||
- Serial Number
|
||||
|
||||
2. **FilaMan Konfiguration**
|
||||
- Geben Sie die Drucker-Daten in der "Spoolman/Bambu" Seite ein
|
||||
- Aktivieren Sie "Auto Send to Bambu" für automatische AMS-Zuordnung
|
||||
|
||||
3. **Auto-Send Timeout**
|
||||
- Konfigurieren Sie die Wartezeit für automatische Spulen-Erkennung
|
||||
- Empfohlener Wert: 10-30 Sekunden
|
||||
|
||||
---
|
||||
|
||||
## Benutzung
|
||||
|
||||
### Grundlegende Bedienung
|
||||
|
||||
1. **Filament wiegen**
|
||||
- Platzieren Sie die Spule auf der Waage
|
||||
- Das Gewicht wird automatisch auf dem Display und in der Weboberfläche angezeigt
|
||||
|
||||
2. **NFC-Tag scannen**
|
||||
- Halten Sie den Tag in die Nähe des PN532-Moduls
|
||||
- Bei erkannten Tags wird die Spulen-Information angezeigt
|
||||
- Das Gewicht wird automatisch in Spoolman aktualisiert
|
||||
|
||||
3. **Status-Überwachung**
|
||||
- **OLED-Display** zeigt aktuelles Gewicht und Verbindungsstatus
|
||||
- **Weboberfläche** bietet detaillierte Informationen und Steuerung
|
||||
|
||||
### Weboberfläche Navigation
|
||||
|
||||
- **Startseite**: Hauptfunktionen und aktueller Status
|
||||
- **Scale**: Waagen-Kalibrierung und -Einstellungen
|
||||
- **Spoolman/Bambu**: System-Konfiguration
|
||||
- **Statistics**: Nutzungsstatistiken (falls aktiviert)
|
||||
|
||||
---
|
||||
|
||||
## NFC-Tags
|
||||
|
||||
### Unterstützte Tag-Typen
|
||||
|
||||
- **NTAG213**: 144 Bytes (grundlegende Funktionen)
|
||||
- **NTAG215**: 504 Bytes (empfohlen)
|
||||
- **NTAG216**: 888 Bytes (erweiterte Funktionen)
|
||||
|
||||
### Tag beschreiben
|
||||
|
||||
1. **Spule in Spoolman vorbereiten**
|
||||
- Erstellen Sie eine neue Spule in Spoolman
|
||||
- Stellen Sie sicher, dass alle erforderlichen Daten eingegeben sind
|
||||
|
||||
2. **Tag-Beschreibung starten**
|
||||
- Wählen Sie die Spule aus der Liste
|
||||
- Klicken Sie auf "Write Tag"
|
||||
- Das Display zeigt "Waiting for Tag"
|
||||
|
||||
3. **Tag auflegen**
|
||||
- Platzieren Sie den NFC-Tag auf dem PN532-Modul
|
||||
- Warten Sie auf die Bestätigung
|
||||
|
||||
4. **Erfolgsmeldung**
|
||||
- Bei erfolgreichem Beschreiben wird ein Häkchen angezeigt
|
||||
- Der Tag ist nun mit der Spoolman-Spule verknüpft
|
||||
|
||||
### Tag lesen
|
||||
|
||||
1. **Tag scannen**
|
||||
- Platzieren Sie die Spule mit dem NFC-Tag auf die Waage über dem NFC-Reader
|
||||
- Bei Problemen beim Lesen: Spule etwas anders positionieren (nicht ganz an den Rand)
|
||||
- Die Spulen-Information wird automatisch geladen
|
||||
|
||||
2. **Automatische Updates**
|
||||
- Das aktuelle Gewicht wird in Spoolman übertragen
|
||||
- Die Spule wird in der Weboberfläche automatisch ausgewählt
|
||||
|
||||
---
|
||||
|
||||
## Bambu Lab Integration
|
||||
|
||||
### AMS (Automatic Material System)
|
||||
|
||||
1. **AMS-Status anzeigen**
|
||||
- Die Weboberfläche zeigt den aktuellen Zustand aller AMS-Fächer
|
||||
- Beladene Fächer werden mit Filament-Informationen angezeigt
|
||||
|
||||
2. **Filament manuell zuordnen**
|
||||
- Wählen Sie eine Spule aus der Spoolman-Liste
|
||||
- Klicken Sie auf das entsprechende AMS-Fach-Symbol
|
||||
- Das Filament wird dem Fach zugeordnet
|
||||
|
||||
3. **Automatische Zuordnung**
|
||||
- Nach dem Wiegen mit aktiviertem "Auto Send to Bambu"
|
||||
- Das System wartet auf neue Spulen im AMS
|
||||
- Kalibrierte Filamente werden automatisch zugeordnet
|
||||
|
||||
### Bambu Studio Integration
|
||||
|
||||
1. **Filament-Profile synchronisieren**
|
||||
- Kalibrieren Sie Filamente in Bambu Studio
|
||||
- Verwenden Sie Device → AMS → Bleistift-Symbol → Auswählen
|
||||
|
||||
2. **Setting-IDs speichern**
|
||||
- FilaMan erkennt verfügbare Setting-IDs automatisch
|
||||
- Klicken Sie auf "Settings in Spoolman speichern"
|
||||
- Die Profile werden für zukünftige Drucke verwendet
|
||||
|
||||
### Verbindung wiederherstellen
|
||||
|
||||
- Bei Verbindungsproblemen klicken Sie den roten Punkt in der Menüleiste
|
||||
- Das System stellt automatisch eine neue Verbindung her
|
||||
|
||||
---
|
||||
|
||||
## Spoolman Integration
|
||||
|
||||
### Automatische Funktionen
|
||||
|
||||
1. **Spulen-Synchronisation**
|
||||
- Automatische Übertragung von Gewichtsänderungen
|
||||
- Echtzeit-Updates der Spulen-Daten
|
||||
|
||||
2. **Extra-Felder**
|
||||
- FilaMan erstellt automatisch erforderliche benutzerdefinierte Felder
|
||||
- NFC-Tag-UID wird als Referenz gespeichert
|
||||
|
||||
3. **Filterung**
|
||||
- "Nur Spulen ohne NFC-Tag anzeigen" für einfache Tag-Zuordnung
|
||||
- Kategorisierung nach Herstellern und Materialtypen
|
||||
|
||||
### Spoolman Octoprint Plugin
|
||||
|
||||
Für Octoprint-Benutzer ist eine automatische Spulen-Zuordnung verfügbar:
|
||||
|
||||
1. **Plugin installieren**
|
||||
```
|
||||
https://github.com/ManuelW77/OctoPrint-Spoolman-Filaman/archive/refs/heads/master.zip
|
||||
```
|
||||
|
||||
2. **FilaMan konfigurieren**
|
||||
- Aktivieren Sie "Send to Octo-Plugin"
|
||||
- Geben Sie Octoprint-URL und API-Key ein
|
||||
|
||||
3. **Automatische Zuordnung**
|
||||
- Nach dem Wiegen wird die Spule automatisch in Octoprint aktiviert
|
||||
- Unterstützt aktuell nur Tool0 (erste Düse)
|
||||
|
||||
---
|
||||
|
||||
## Hersteller Tags
|
||||
|
||||
### Überblick
|
||||
|
||||
Hersteller Tags ermöglichen es Filament-Produzenten, vorkonfigurierte NFC-Tags zu liefern, die automatisch alle notwendigen Einträge in Spoolman erstellen.
|
||||
|
||||
### Erste Schritte mit Hersteller Tags
|
||||
|
||||
1. **Tag scannen**
|
||||
- Platzieren Sie die Spule mit dem Hersteller-Tag auf die Waage über dem NFC-Reader
|
||||
- Bei Problemen beim Lesen: Spule etwas anders positionieren (nicht ganz an den Rand)
|
||||
- Das System erkennt automatisch das Hersteller-Format
|
||||
|
||||
2. **Automatische Erstellung**
|
||||
- **Marke** wird in Spoolman angelegt (falls nicht vorhanden)
|
||||
- **Filament-Typ** wird mit allen Spezifikationen erstellt
|
||||
- **Spule** wird automatisch registriert
|
||||
|
||||
3. **Zukünftige Scans**
|
||||
- Nach der ersten Einrichtung nutzen Tags das Fast-Path-System
|
||||
- Sofortige Gewichtsmessung ohne erneute Einrichtung
|
||||
|
||||
### Unterstützte Hersteller
|
||||
|
||||
- **RecyclingFabrik**: Erster offizieller Partner
|
||||
- Weitere Hersteller folgen
|
||||
|
||||
### Vorteile
|
||||
|
||||
- ✅ **Null manuelle Einrichtung**
|
||||
- ✅ **Perfekte Datengenauigkeit**
|
||||
- ✅ **Sofortige Integration**
|
||||
- ✅ **Zukunftssicher**
|
||||
|
||||
---
|
||||
|
||||
## Fehlerbehebung
|
||||
|
||||
### Häufige Probleme
|
||||
|
||||
#### WiFi-Verbindung
|
||||
|
||||
**Problem**: Kann nicht mit FilaMan-Hotspot verbinden
|
||||
- Lösung: Stellen Sie sicher, dass der ESP32 gestartet ist
|
||||
- Alternative: Manuell zu http://192.168.4.1 navigieren
|
||||
|
||||
**Problem**: Weboberfläche nicht erreichbar
|
||||
- Lösung: Prüfen Sie die IP-Adresse im Router
|
||||
- Alternative: Verwenden Sie http://filaman.local
|
||||
|
||||
#### Waage
|
||||
|
||||
**Problem**: Ungenaue Gewichtsmessungen
|
||||
- Lösung: Kalibrierung wiederholen
|
||||
- Tipp: Verwenden Sie "Tare Scale" für Nullstellung
|
||||
|
||||
**Problem**: Wägezelle reagiert nicht
|
||||
- Lösung: Überprüfen Sie die Verkabelung (E+, E-, A+, A-)
|
||||
- Tipp: Testen Sie mit einem Multimeter
|
||||
|
||||
#### NFC-Tags
|
||||
|
||||
**Problem**: Tag wird nicht erkannt
|
||||
- Lösung: Überprüfen Sie die PN532 DIP-Schalter (I2C-Modus)
|
||||
- Tipp: Spule etwas anders auf der Waage positionieren (nicht ganz an den Rand)
|
||||
|
||||
**Problem**: Tag kann nicht beschrieben werden
|
||||
- Lösung: Verwenden Sie NTAG215 für bessere Kompatibilität
|
||||
- Tipp: Stellen Sie sicher, dass der Tag nicht schreibgeschützt ist
|
||||
|
||||
#### Spoolman
|
||||
|
||||
**Problem**: Verbindung zu Spoolman schlägt fehl
|
||||
- Lösung: Aktivieren Sie SPOOLMAN_DEBUG_MODE=TRUE
|
||||
- Tipp: Überprüfen Sie die URL-Formatierung
|
||||
|
||||
**Problem**: Spulen werden nicht angezeigt
|
||||
- Lösung: Stellen Sie sicher, dass Spoolman läuft
|
||||
- Tipp: Prüfen Sie die Netzwerk-Firewall-Einstellungen
|
||||
|
||||
#### Bambu Lab
|
||||
|
||||
**Problem**: Drucker verbindet nicht
|
||||
- Lösung: Überprüfen Sie Access Code und IP-Adresse
|
||||
- Tipp: Stellen Sie sicher, dass der Drucker im LAN-Modus ist
|
||||
|
||||
**Problem**: AMS-Status wird nicht angezeigt
|
||||
- Lösung: Prüfen Sie die MQTT-Verbindung
|
||||
- Hinweis: Bambu kann die API jederzeit schließen
|
||||
|
||||
### Debug-Informationen
|
||||
|
||||
Falls Sie Probleme haben, können Sie diese Schritte zur Diagnose verwenden:
|
||||
|
||||
#### Serieller Monitor (für Entwickler)
|
||||
- Verbinden Sie den ESP32 über USB mit Ihrem Computer
|
||||
- Öffnen Sie einen seriellen Monitor (z.B. Arduino IDE) mit 115200 Baud
|
||||
- Sie sehen detaillierte Log-Nachrichten des Systems
|
||||
|
||||
#### Browser-Konsole
|
||||
- Öffnen Sie die Weboberfläche von FilaMan
|
||||
- Drücken Sie F12 um die Entwicklertools zu öffnen
|
||||
- Schauen Sie in der Konsole nach Fehlermeldungen
|
||||
|
||||
#### Neustart bei anhaltenden Problemen
|
||||
1. ESP32 vom Strom trennen
|
||||
2. 10 Sekunden warten
|
||||
3. Wieder anschließen
|
||||
4. 30 Sekunden für vollständigen Start warten
|
||||
|
||||
---
|
||||
|
||||
## Support
|
||||
|
||||
### Community
|
||||
|
||||
- **Discord Server**: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
|
||||
- **GitHub Issues**: [Filaman Repository](https://github.com/ManuelW77/Filaman/issues)
|
||||
- **YouTube Kanal**: [Deutsches Erklärvideo](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
|
||||
|
||||
### Dokumentation
|
||||
|
||||
- **Offizielle Website**: [www.filaman.app](https://www.filaman.app)
|
||||
- **GitHub Wiki**: [Detaillierte Dokumentation](https://github.com/ManuelW77/Filaman/wiki)
|
||||
- **Hardware-Referenz**: ESP32 Pinout-Diagramme in `/img/`
|
||||
|
||||
### Entwicklung unterstützen
|
||||
|
||||
Wenn Sie das Projekt unterstützen möchten:
|
||||
|
||||
[](https://www.buymeacoffee.com/manuelw)
|
||||
|
||||
### Lizenz
|
||||
|
||||
Dieses Projekt ist unter der MIT-Lizenz veröffentlicht. Siehe [LICENSE](LICENSE.txt) für Details.
|
||||
|
||||
---
|
||||
|
||||
**Letzte Aktualisierung**: August 2025
|
||||
**Version**: 2.0
|
||||
**Maintainer**: Manuel W.
|
||||
746
WIKI_EN.md
Normal file
746
WIKI_EN.md
Normal file
@@ -0,0 +1,746 @@
|
||||
# FilaMan Wiki - English
|
||||
|
||||
## Table of Contents
|
||||
|
||||
1. [Overview](#overview)
|
||||
2. [Installation](#installation)
|
||||
3. [Hardware Requirements](#hardware-requirements)
|
||||
4. [Initial Setup](#initial-setup)
|
||||
5. [Configuration](#configuration)
|
||||
6. [Usage](#usage)
|
||||
7. [NFC Tags](#nfc-tags)
|
||||
8. [Bambu Lab Integration](#bambu-lab-integration)
|
||||
9. [Spoolman Integration](#spoolman-integration)
|
||||
10. [Octoprint Integration](#octoprint-integration)
|
||||
11. [Manufacturer Tags](#manufacturer-tags)
|
||||
12. [Troubleshooting](#troubleshooting)
|
||||
13. [Support](#support)
|
||||
|
||||
---
|
||||
|
||||
## Overview
|
||||
|
||||
FilaMan is a comprehensive filament management system for 3D printers based on ESP32 hardware. It provides weight measurement, NFC tag management, and seamless integration with Spoolman and Bambu Lab 3D printers.
|
||||
|
||||
### Key Features
|
||||
|
||||
- **Precise weight measurement** with HX711 load cell amplifier
|
||||
- **NFC tag reading and writing** for filament identification
|
||||
- **OLED display** for status information
|
||||
- **WiFi connectivity** with easy configuration
|
||||
- **Web-based user interface** with real-time updates
|
||||
- **Spoolman integration** for inventory management
|
||||
- **Bambu Lab AMS control** via MQTT
|
||||
- **OpenSpool NFC format** compatibility
|
||||
- **Manufacturer tag support** for automatic setup
|
||||
|
||||
### System Requirements
|
||||
|
||||
- **ESP32 Development Board**
|
||||
- **Spoolman Instance** (required for full functionality)
|
||||
- **WiFi Network**
|
||||
- **Web Browser** (Chrome/Firefox/Safari)
|
||||
|
||||
---
|
||||
|
||||
## Installation
|
||||
|
||||
### Easy Installation (Recommended)
|
||||
|
||||
1. **Open the [FilaMan Web Installer](https://www.filaman.app/installer.html)**
|
||||
- Use a Chrome-based browser
|
||||
|
||||
2. **Prepare ESP32**
|
||||
- Connect ESP32 via USB to your computer
|
||||
- Click "Connect"
|
||||
|
||||
3. **Select Port**
|
||||
- Choose the appropriate USB port
|
||||
- Confirm selection
|
||||
|
||||
4. **Start Installation**
|
||||
- Click "Install FilaMan"
|
||||
- Wait for installation to complete
|
||||
|
||||
### Manual Compilation
|
||||
|
||||
For advanced users with PlatformIO:
|
||||
|
||||
```bash
|
||||
git clone https://github.com/ManuelW77/Filaman.git
|
||||
cd FilaMan/esp32
|
||||
pio lib install
|
||||
pio run --target upload
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Hardware Requirements
|
||||
|
||||
### Required Components
|
||||
|
||||
| Component | Description | Amazon Link (Affiliate) |
|
||||
|-----------|-------------|-------------------------|
|
||||
| ESP32 Development Board | Any ESP32 variant | [Amazon](https://amzn.to/3FHea6D) |
|
||||
| HX711 + Load Cell | 5kg Load Cell Amplifier | [Amazon](https://amzn.to/4ja1KTe) |
|
||||
| OLED Display | 0.96" I2C 128x64 SSD1306 | [Amazon](https://amzn.to/445aaa9) |
|
||||
| PN532 NFC Module | V3 RFID Module | [Amazon](https://amzn.eu/d/gy9vaBX) |
|
||||
| NFC Tags | NTAG213/NTAG215 | [Amazon](https://amzn.to/3E071xO) |
|
||||
| TTP223 Touch Sensor | Optional for tare function | [Amazon](https://amzn.to/4hTChMK) |
|
||||
|
||||
### Pin Configuration
|
||||
|
||||
| Component | ESP32 Pin | Function |
|
||||
|-----------|-----------|----------|
|
||||
| HX711 DOUT | 16 | Load cell data output |
|
||||
| HX711 SCK | 17 | Load cell clock |
|
||||
| OLED SDA | 21 | I2C data |
|
||||
| OLED SCL | 22 | I2C clock |
|
||||
| PN532 IRQ | 32 | Interrupt |
|
||||
| PN532 RESET | 33 | Reset |
|
||||
| PN532 SDA | 21 | I2C data (shared) |
|
||||
| PN532 SCL | 22 | I2C clock (shared) |
|
||||
| TTP223 I/O | 25 | Touch sensor (optional) |
|
||||
|
||||
### Important Notes
|
||||
|
||||
- **PN532 DIP switches** must be set to I2C mode
|
||||
- **3V pin** from ESP32 for touch sensor
|
||||
- **Load cell wiring**: E+ (red), E- (black), A- (white), A+ (green)
|
||||
|
||||
|
||||
|
||||
---
|
||||
|
||||
## Initial Setup
|
||||
|
||||
### After Installation
|
||||
|
||||
1. **ESP32 Restart**
|
||||
- System automatically creates a WiFi hotspot "FilaMan"
|
||||
|
||||
2. **WiFi Configuration**
|
||||
- Connect to the "FilaMan" network
|
||||
- Open browser (automatic portal or <http://192.168.4.1>)
|
||||
- Configure your WiFi credentials
|
||||
|
||||
3. **First Access**
|
||||
- After successful WiFi connection, access system at <http://filaman.local>
|
||||
- Alternative: Use IP address assigned by router
|
||||
|
||||
### Spoolman Preparation
|
||||
|
||||
**Important Note**: Spoolman must run in debug mode:
|
||||
|
||||
```env
|
||||
# Uncomment in Spoolman's .env file:
|
||||
SPOOLMAN_DEBUG_MODE=TRUE
|
||||
```
|
||||
|
||||
This is required as Spoolman doesn't support CORS domain configuration yet.
|
||||
|
||||
---
|
||||
|
||||
## Configuration
|
||||
|
||||
### Scale Calibration
|
||||
|
||||
1. **Start Calibration**
|
||||
- Go to "Scale" page
|
||||
- Prepare a 500g reference weight (e.g., water glass)
|
||||
|
||||
2. **Calibration Steps**
|
||||
- Follow instructions on display
|
||||
- Place weight when prompted
|
||||
- Wait for calibration to complete
|
||||
|
||||
3. **Validation**
|
||||
- Test accuracy with known weights
|
||||
- Use "Tare Scale" for zero adjustment if needed
|
||||
|
||||
### Spoolman Connection
|
||||
|
||||
1. **Enter Spoolman URL**
|
||||
- Go to "Spoolman/Bambu" page
|
||||
- Enter complete URL of your Spoolman instance
|
||||
- Format: `http://spoolman-server:7912`
|
||||
|
||||
2. **Test Connection**
|
||||
- System automatically checks connection
|
||||
- Successful connection shown by green status
|
||||
|
||||
### Bambu Lab Printer (Optional)
|
||||
|
||||
1. **Printer Settings**
|
||||
- Open settings menu on your Bambu printer
|
||||
- Note the following data:
|
||||
- Printer IP address
|
||||
- Access Code
|
||||
- Serial Number
|
||||
|
||||
2. **FilaMan Configuration**
|
||||
- Enter printer data on "Spoolman/Bambu" page
|
||||
- Enable "Auto Send to Bambu" for automatic AMS assignment
|
||||
|
||||
3. **Auto-Send Timeout**
|
||||
- Configure waiting time for automatic spool detection
|
||||
- Recommended value: 10-30 seconds
|
||||
|
||||
---
|
||||
|
||||
## Usage
|
||||
|
||||
### Basic Operation
|
||||
|
||||
1. **Weigh Filament**
|
||||
- Place spool on scale
|
||||
- Weight automatically displayed on screen and web interface
|
||||
|
||||
2. **Scan NFC Tag**
|
||||
- Hold tag near PN532 module
|
||||
- Recognized tags display spool information
|
||||
- Weight automatically updated in Spoolman
|
||||
|
||||
3. **Status Monitoring**
|
||||
- **OLED Display** shows current weight and connection status
|
||||
- **Web Interface** provides detailed information and control
|
||||
|
||||
### Web Interface Navigation
|
||||
|
||||
- **Home**: Main functions and current status
|
||||
- **Scale**: Scale calibration and settings
|
||||
- **Spoolman/Bambu**: System configuration
|
||||
- **Statistics**: Usage statistics (if enabled)
|
||||
|
||||
---
|
||||
|
||||
## NFC Tags
|
||||
|
||||
### Supported Tag Types
|
||||
|
||||
- **NTAG213**: 144 bytes (basic functions)
|
||||
- **NTAG215**: 504 bytes (recommended)
|
||||
- **NTAG216**: 888 bytes (extended functions)
|
||||
|
||||
### Writing Tags
|
||||
|
||||
1. **Prepare Spool in Spoolman**
|
||||
- Create new spool in Spoolman
|
||||
- Ensure all required data is entered
|
||||
|
||||
2. **Start Tag Writing**
|
||||
- Select spool from list
|
||||
- Click "Write Tag"
|
||||
- Display shows "Waiting for Tag"
|
||||
|
||||
3. **Place Tag**
|
||||
- Position NFC tag on PN532 module
|
||||
- Wait for confirmation
|
||||
|
||||
4. **Success Message**
|
||||
- Successful writing shows checkmark
|
||||
- Tag is now linked to Spoolman spool
|
||||
|
||||
### Reading Tags
|
||||
|
||||
1. **Scan Tag**
|
||||
- Place the spool with NFC tag on the scale over the NFC reader
|
||||
- If reading fails: Reposition spool slightly (not completely at the edge)
|
||||
- Spool information automatically loaded
|
||||
|
||||
2. **Automatic Updates**
|
||||
- Current weight transferred to Spoolman
|
||||
- Spool automatically selected in web interface
|
||||
|
||||
---
|
||||
|
||||
## Bambu Lab Integration
|
||||
|
||||
### AMS (Automatic Material System)
|
||||
|
||||
1. **Display AMS Status**
|
||||
- Web interface shows current state of all AMS slots
|
||||
- Loaded slots display filament information
|
||||
|
||||
2. **Manual Filament Assignment**
|
||||
- Select spool from Spoolman list
|
||||
- Click corresponding AMS slot icon
|
||||
- Filament assigned to slot
|
||||
|
||||
3. **Automatic Assignment**
|
||||
- After weighing with "Auto Send to Bambu" enabled
|
||||
- System waits for new spools in AMS
|
||||
- Calibrated filaments automatically assigned
|
||||
|
||||
### Bambu Studio Integration
|
||||
|
||||
1. **Sync Filament Profiles**
|
||||
- Calibrate filaments in Bambu Studio
|
||||
- Use Device → AMS → Pencil icon → Select
|
||||
|
||||
2. **Save Setting IDs**
|
||||
- FilaMan automatically detects available setting IDs
|
||||
- Click "Save Settings to Spoolman"
|
||||
- Profiles used for future prints
|
||||
|
||||
### Restore Connection
|
||||
|
||||
- For connection issues, click red dot in menu bar
|
||||
- System automatically establishes new connection
|
||||
|
||||
---
|
||||
|
||||
## Spoolman Integration
|
||||
|
||||
### Automatic Functions
|
||||
|
||||
1. **Spool Synchronization**
|
||||
- Automatic transfer of weight changes
|
||||
- Real-time updates of spool data
|
||||
|
||||
2. **Extra Fields**
|
||||
- FilaMan automatically creates required custom fields
|
||||
- NFC tag UID stored as reference
|
||||
|
||||
3. **Filtering**
|
||||
- "Show only spools without NFC tag" for easy tag assignment
|
||||
- Categorization by manufacturers and material types
|
||||
|
||||
### Spoolman Octoprint Plugin
|
||||
|
||||
For Octoprint users, automatic spool assignment is available:
|
||||
|
||||
1. **Install Plugin**
|
||||
|
||||
```text
|
||||
https://github.com/ManuelW77/OctoPrint-Spoolman-Filaman/archive/refs/heads/master.zip
|
||||
```
|
||||
|
||||
2. **Configure FilaMan**
|
||||
- Enable "Send to Octo-Plugin"
|
||||
- Enter Octoprint URL and API key
|
||||
|
||||
3. **Automatic Assignment**
|
||||
- After weighing, spool automatically activated in Octoprint
|
||||
- Currently supports only Tool0 (first nozzle)
|
||||
|
||||
---
|
||||
|
||||
## Manufacturer Tags
|
||||
|
||||
### Overview
|
||||
|
||||
Manufacturer tags allow filament producers to provide pre-configured NFC tags that automatically create all necessary entries in Spoolman.
|
||||
|
||||
### Getting Started with Manufacturer Tags
|
||||
|
||||
1. **Scan Tag**
|
||||
- Place spool with manufacturer tag on the scale over the NFC reader
|
||||
- If reading fails: Reposition spool slightly (not completely at the edge)
|
||||
- System automatically recognizes manufacturer format
|
||||
|
||||
2. **Automatic Creation**
|
||||
- **Brand** created in Spoolman (if not present)
|
||||
- **Filament type** created with all specifications
|
||||
- **Spool** automatically registered
|
||||
|
||||
3. **Future Scans**
|
||||
- After initial setup, tags use fast-path system
|
||||
- Immediate weight measurement without re-setup
|
||||
|
||||
### Supported Manufacturers
|
||||
|
||||
- **RecyclingFabrik**: First official partner
|
||||
- More manufacturers coming soon
|
||||
|
||||
### Benefits
|
||||
|
||||
- ✅ **Zero manual setup**
|
||||
- ✅ **Perfect data accuracy**
|
||||
- ✅ **Instant integration**
|
||||
- ✅ **Future-proof**
|
||||
|
||||
---
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
### Common Issues
|
||||
|
||||
#### WiFi Connection
|
||||
|
||||
**Issue**: Cannot connect to FilaMan hotspot
|
||||
|
||||
- Solution: Ensure ESP32 is started
|
||||
- Alternative: Manually navigate to <http://192.168.4.1>
|
||||
|
||||
**Issue**: Web interface not accessible
|
||||
|
||||
- Solution: Check IP address in router
|
||||
- Alternative: Use <http://filaman.local>
|
||||
|
||||
#### Scale
|
||||
|
||||
**Issue**: Inaccurate weight measurements
|
||||
|
||||
- Solution: Repeat calibration
|
||||
- Tip: Use "Tare Scale" for zero adjustment
|
||||
|
||||
**Issue**: Load cell not responding
|
||||
|
||||
- Solution: Check wiring (E+, E-, A+, A-)
|
||||
- Tip: Test with multimeter
|
||||
|
||||
#### NFC Tags
|
||||
|
||||
**Issue**: Tag not recognized
|
||||
|
||||
- Solution: Check PN532 DIP switches (I2C mode)
|
||||
- Tip: Reposition spool slightly on scale (not completely at the edge)
|
||||
|
||||
**Issue**: Cannot write tag
|
||||
|
||||
- Solution: Use NTAG215 for better compatibility
|
||||
- Tip: Ensure tag is not write-protected
|
||||
|
||||
#### Spoolman
|
||||
|
||||
**Issue**: Connection to Spoolman fails
|
||||
|
||||
- Solution: Enable SPOOLMAN_DEBUG_MODE=TRUE
|
||||
- Tip: Check URL formatting
|
||||
|
||||
**Issue**: Spools not displayed
|
||||
|
||||
- Solution: Ensure Spoolman is running
|
||||
- Tip: Check network firewall settings
|
||||
|
||||
#### Bambu Lab
|
||||
|
||||
**Issue**: Printer won't connect
|
||||
|
||||
- Solution: Check access code and IP address
|
||||
- Tip: Ensure printer is in LAN mode
|
||||
|
||||
**Issue**: AMS status not displayed
|
||||
|
||||
- Solution: Check MQTT connection
|
||||
- Note: Bambu may close API at any time
|
||||
|
||||
### Debug Information
|
||||
|
||||
If you have problems, you can use these steps for diagnosis:
|
||||
|
||||
#### Serial Monitor (for developers)
|
||||
|
||||
- Connect the ESP32 via USB to your computer
|
||||
- Open a serial monitor (e.g., Arduino IDE) with 115200 baud
|
||||
- You will see detailed log messages from the system
|
||||
|
||||
#### Browser Console
|
||||
|
||||
- Open the FilaMan web interface
|
||||
- Press F12 to open developer tools
|
||||
- Check the console for error messages
|
||||
|
||||
---
|
||||
|
||||
## Maintenance and Updates
|
||||
|
||||
### Firmware Update
|
||||
|
||||
1. **Via Web Interface**: Access `http://filaman.local/upgrade.html`
|
||||
2. **Select firmware file** (.bin format)
|
||||
3. **Upload** - System restarts automatically
|
||||
4. **Configuration preserved** - Settings remain intact
|
||||
|
||||
### System Reset
|
||||
|
||||
For persistent issues:
|
||||
|
||||
1. Disconnect ESP32 from power
|
||||
2. Wait 10 seconds
|
||||
3. Reconnect
|
||||
4. Wait 30 seconds for complete startup
|
||||
|
||||
---
|
||||
|
||||
## Support and Information
|
||||
|
||||
**Manufacturer**: Your Company Name
|
||||
**Maintainer**: Manuel W.
|
||||
|
||||
### Scale Technology
|
||||
|
||||
#### Weight Stabilization
|
||||
|
||||
The system uses multiple filters for precise measurements:
|
||||
|
||||
```cpp
|
||||
// Moving Average Filter with 8 values
|
||||
#define MOVING_AVERAGE_SIZE 8
|
||||
// Low-Pass Filter for smoothing
|
||||
#define LOW_PASS_ALPHA 0.3f
|
||||
// Thresholds for updates
|
||||
#define DISPLAY_THRESHOLD 0.3f // Display update
|
||||
#define API_THRESHOLD 1.5f // API actions
|
||||
```
|
||||
|
||||
#### Calibration Algorithm
|
||||
|
||||
1. **System Pause**: All tasks are temporarily paused
|
||||
2. **Zero Setting**: Tare scale without weight
|
||||
3. **Reference Measurement**: 500g weight for 10 measurements
|
||||
4. **Calculation**: `newValue = rawValue / SCALE_LEVEL_WEIGHT`
|
||||
5. **NVS Storage**: Permanent value with verification
|
||||
6. **Filter Reset**: New baseline for stabilization
|
||||
|
||||
#### Auto-Tare Logic
|
||||
|
||||
```cpp
|
||||
// Conditions for Auto-Tare
|
||||
if (autoTare && (weight > 2 && weight < 7) || weight < -2) {
|
||||
scale_tare_counter++;
|
||||
if (scale_tare_counter >= 5) {
|
||||
// Automatic zero setting
|
||||
scale.tare();
|
||||
resetWeightFilter();
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
### NFC Technology
|
||||
|
||||
#### PN532 Communication
|
||||
|
||||
- **Interface**: I2C at 400kHz
|
||||
- **IRQ Pin**: Interrupt-based tag detection
|
||||
- **Reset Handling**: Automatic recovery from communication errors
|
||||
- **DIP Switches**: Must be set to I2C mode (00)
|
||||
|
||||
#### NDEF Implementation
|
||||
|
||||
```json
|
||||
// FilaMan Spoolman Format (with sm_id)
|
||||
{
|
||||
"sm_id": "123",
|
||||
"color": "#FF5733",
|
||||
"type": "PLA",
|
||||
"brand": "Example Brand"
|
||||
}
|
||||
```
|
||||
|
||||
#### Manufacturer Tag Schema
|
||||
|
||||
Compact JSON format for storage efficiency:
|
||||
|
||||
```json
|
||||
{
|
||||
"b": "RecyclingFabrik", // brand
|
||||
"an": "FX1_PLA-S175-1000-RED", // article number
|
||||
"t": "PLA", // type
|
||||
"c": "FF0000", // color (hex without #)
|
||||
"cn": "Red", // color name
|
||||
"et": "210", // extruder temp
|
||||
"bt": "60", // bed temp
|
||||
"di": "1.75", // diameter
|
||||
"de": "1.24", // density
|
||||
"sw": "240", // spool weight
|
||||
"u": "https://www.yoururl.com/search?q=" // URL used vor Brand Link and Filament Link
|
||||
}
|
||||
```
|
||||
|
||||
### Display System
|
||||
|
||||
#### OLED Architecture (SSD1306)
|
||||
|
||||
- **Resolution**: 128x64 pixels monochrome
|
||||
- **Areas**:
|
||||
- Status bar: 0-16 pixels (version, icons)
|
||||
- Main area: 17-64 pixels (weight, messages)
|
||||
- **Update Interval**: 1 second for status line
|
||||
|
||||
#### Icon System
|
||||
|
||||
Bitmap icons for various states:
|
||||
|
||||
```cpp
|
||||
// Status Icons (16x16 pixels)
|
||||
- icon_success: Checkmark for successful operations
|
||||
- icon_failed: X for errors
|
||||
- icon_transfer: Arrow for data transmission
|
||||
- icon_loading: Loading circle for ongoing operations
|
||||
|
||||
// Connection Icons with strikethrough indicator
|
||||
- wifi_on/wifi_off: WLAN status
|
||||
- bambu_on: Bambu Lab connection
|
||||
- spoolman_on: Spoolman API status
|
||||
```
|
||||
|
||||
### API Integration
|
||||
|
||||
#### Spoolman REST API
|
||||
|
||||
FilaMan interacts with the following endpoints:
|
||||
|
||||
```http
|
||||
GET /api/v1/spool/ # List spools
|
||||
POST /api/v1/spool/ # Create new spool
|
||||
PUT /api/v1/spool/{id}/ # Update spool
|
||||
|
||||
GET /api/v1/vendor/ # List vendors
|
||||
POST /api/v1/vendor/ # Create new vendor
|
||||
|
||||
GET /api/v1/filament/ # List filaments
|
||||
POST /api/v1/filament/ # Create new filament
|
||||
```
|
||||
|
||||
#### Request Handling
|
||||
|
||||
```cpp
|
||||
// Sequential API processing
|
||||
enum spoolmanApiStateType {
|
||||
API_IDLE = 0,
|
||||
API_PROCESSING = 1,
|
||||
API_ERROR = 2
|
||||
};
|
||||
```
|
||||
|
||||
Prevents simultaneous API calls and deadlocks.
|
||||
|
||||
#### Weight Update Logic
|
||||
|
||||
```cpp
|
||||
// Conditions for Spoolman update
|
||||
if (activeSpoolId != "" &&
|
||||
weigthCouterToApi > 3 && // 3+ stable measurements
|
||||
weightSend == 0 && // Not yet sent
|
||||
weight > 5 && // Minimum weight 5g
|
||||
spoolmanApiState == API_IDLE) {
|
||||
updateSpoolWeight(activeSpoolId, weight);
|
||||
}
|
||||
```
|
||||
|
||||
### Bambu Lab MQTT
|
||||
|
||||
#### Connection Parameters
|
||||
|
||||
```cpp
|
||||
// SSL/TLS Configuration
|
||||
#define BAMBU_PORT 8883
|
||||
#define BAMBU_USERNAME "bblp"
|
||||
|
||||
// Topic Structure
|
||||
String topic = "device/" + bambu_serial + "/report";
|
||||
String request_topic = "device/" + bambu_serial + "/request";
|
||||
```
|
||||
|
||||
#### AMS Data Structure
|
||||
|
||||
```cpp
|
||||
struct AMSData {
|
||||
String tray_id;
|
||||
String tray_type;
|
||||
String tray_color;
|
||||
String tray_material;
|
||||
String setting_id;
|
||||
String tray_info_idx;
|
||||
bool has_spool;
|
||||
};
|
||||
```
|
||||
|
||||
#### Auto-Send Mechanism
|
||||
|
||||
```cpp
|
||||
// After tag recognition
|
||||
if (bambuCredentials.autosend_enable) {
|
||||
autoSetToBambuSpoolId = activeSpoolId.toInt();
|
||||
// Countdown starts automatically
|
||||
// Waits for new spool in AMS
|
||||
}
|
||||
```
|
||||
|
||||
### WebSocket Communication
|
||||
|
||||
#### Message Types
|
||||
|
||||
```javascript
|
||||
// Client → Server
|
||||
{
|
||||
"type": "writeNfcTag",
|
||||
"tagType": "spool",
|
||||
"payload": { /* JSON data */ }
|
||||
}
|
||||
|
||||
{
|
||||
"type": "scale",
|
||||
"payload": "tare|calibrate|setAutoTare",
|
||||
"enabled": true
|
||||
}
|
||||
|
||||
// Server → Client
|
||||
{
|
||||
"type": "heartbeat",
|
||||
"freeHeap": 245,
|
||||
"bambu_connected": true,
|
||||
"spoolman_connected": true
|
||||
}
|
||||
|
||||
{
|
||||
"type": "amsData",
|
||||
"data": [ /* AMS array */ ]
|
||||
}
|
||||
```
|
||||
|
||||
#### Connection Management
|
||||
|
||||
- **Auto-Reconnect**: Client-side reconnection
|
||||
- **Heartbeat**: Every 30 seconds for connection monitoring
|
||||
- **Cleanup**: Automatic removal of dead connections
|
||||
|
||||
### Watchdog and Error Handling
|
||||
|
||||
#### System Watchdog
|
||||
|
||||
```cpp
|
||||
// WDT Configuration
|
||||
esp_task_wdt_init(10, true); // 10s timeout, panic on overflow
|
||||
esp_task_wdt_add(NULL); // Add current task
|
||||
```
|
||||
|
||||
#### Error Recovery
|
||||
|
||||
- **NFC Reset**: Automatic PN532 restart on communication errors
|
||||
- **MQTT Reconnect**: Bambu Lab connection automatically restored
|
||||
- **WiFi Monitoring**: Connection check every 60 seconds
|
||||
|
||||
---
|
||||
|
||||
## Support
|
||||
|
||||
### Community
|
||||
|
||||
- **Discord Server**: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
|
||||
- **GitHub Issues**: [Filaman Repository](https://github.com/ManuelW77/Filaman/issues)
|
||||
- **YouTube Channel**: [German explanation video](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
|
||||
|
||||
### Documentation
|
||||
|
||||
- **Official Website**: [www.filaman.app](https://www.filaman.app)
|
||||
- **GitHub Wiki**: [Detailed documentation](https://github.com/ManuelW77/Filaman/wiki)
|
||||
- **Hardware Reference**: ESP32 pinout diagrams in `/img/`
|
||||
|
||||
### Support Development
|
||||
|
||||
If you'd like to support the project:
|
||||
|
||||
[](https://www.buymeacoffee.com/manuelw)
|
||||
|
||||
### License
|
||||
|
||||
This project is released under the MIT License. See [LICENSE](LICENSE.txt) for details.
|
||||
|
||||
---
|
||||
|
||||
**Last Updated**: August 2025
|
||||
**Version**: 2.0
|
||||
**Maintainer**: Manuel W.
|
||||
Reference in New Issue
Block a user