ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
254 Commits 2 Branches 14 Tags 2.9 MiB
C 94.3%
C++ 3.2%
Objective-C 1.4%
Makefile 0.9%
Dockerfile 0.2%
b51e902530
Go to file
Sonny Jeon b51e902530 Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 
- Program stop support (M0,M1*,M2,M30*). *Optional stop to be done.
*Pallet shuttle not supported.

- Work position is set equal to machine position upon reset, as
according to NIST RS274-NGC guidelines. G92 is disabled.

- Renamed mc_set_current_position() to mc_set_coordinate_offset().

- Fixed bug in plan_synchronize(). Would exit right before last step is
finished and caused issues with program stops. Now fixed.

- Spindle now stops upon a run-time abort command.

- Updated readme and misc upkeeping.
2012-01-28 20:41:08 -07:00
doc Initial v0.8 ALPHA commit. Features multi-tasking run-time command execution (feed hold, cycle start, reset, status query). Extensive re-structuring of code for future features. 2011-12-08 18:47:48 -07:00
script Streaming script argparse bugfix. 2012-01-27 19:51:16 -07:00
.gitignore merged master 2011-01-31 19:42:56 +01:00
config.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
COPYING renamed file 2009-01-26 10:51:02 +01:00
eeprom.c formatting 2011-01-31 23:04:39 +01:00
eeprom.h Added runtime configurable global settings with eeprom persitence 2010-03-07 20:29:18 +01:00
gcode.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
gcode.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
limits.c Extended position reporting with both home and work coordinates. Home position now retained after reset. Other minor changes/fixes. 2012-01-10 08:34:54 -07:00
limits.h added support for limit switches and homing action 2011-02-20 00:29:56 +01:00
main.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
Makefile cleaned up serial completing support for non blocking tx and refactoring formatting functions into a new module 'print' 2011-06-03 15:28:14 +02:00
motion_control.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
motion_control.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
nuts_bolts.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
nuts_bolts.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
planner.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
planner.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
print.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
print.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
protocol.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
protocol.h Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
readme.textile Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
serial.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
serial.h Initial v0.8 ALPHA commit. Features multi-tasking run-time command execution (feed hold, cycle start, reset, status query). Extensive re-structuring of code for future features. 2011-12-08 18:47:48 -07:00
settings.c Position reporting, refactored system variables, serial print fixes, updated streaming scripts. 2012-01-06 10:10:41 -07:00
settings.h Position reporting, refactored system variables, serial print fixes, updated streaming scripts. 2012-01-06 10:10:41 -07:00
spindle_control.c Initial v0.8 ALPHA commit. Features multi-tasking run-time command execution (feed hold, cycle start, reset, status query). Extensive re-structuring of code for future features. 2011-12-08 18:47:48 -07:00
spindle_control.h refactored block buffer into separate module motion_plan pending the addition of the actual look ahead planner 2011-01-14 16:45:18 +01:00
stepper.c Program stop support (M0,M1*,M2,M30*), proper position retainment upon reset, misc minor updates. 2012-01-28 20:41:08 -07:00
stepper.h Initial v0.8 ALPHA commit. Features multi-tasking run-time command execution (feed hold, cycle start, reset, status query). Extensive re-structuring of code for future features. 2011-12-08 18:47:48 -07:00

readme.textile 

h1. Grbl - An embedded g-code interpreter and motion-controller for the Arduino/AVR328 microcontroller
    
Grbl is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a vanilla Arduino (Duemillanove/Uno) as long as it sports an Atmega 328. 

The controller is written in highly optimized C utilizing every clever feature of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain more than 30kHz of stable, jitter free control pulses.

It accepts standards-compliant G-code and has been tested with the output of several CAM tools with no problems. Arcs, circles and helical motion are fully supported, as well as, other basic functional g-code commands. Functions and variables are not currently supported, but may be included in future releases in a form of a pre-processor.

Grbl includes full acceleration management with look ahead. That means the controller will look up to 18 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.

*Changelog for v0.8 from v0.7:*
  - *ALPHA status: _Under heavy development. Code state may significantly change with each push as new features are integrated._*
  - Major structural overhaul to allow for multi-tasking events and new feature sets
  - New run-time command control: Feed hold (pause), Cycle start (resume), Reset (abort), Status reporting
  - Controlled feed hold with deceleration to ensure no skipped steps and loss of location.
  - After feed hold, cycle accelerations are re-planned and may be resumed.
  - Work offset(G92) and machine coordinate system support.
  - Program stop(M0,M1*,M2,M30) initial support. Pallet shuttle not supported.
  - System reset re-initializes grbl without resetting the Arduino and retains machine/home position.
  - Restructured planner and stepper modules to become independent and ready for future features.
  - Planned features: Jog mode, status reporting, runtime settings such as toggling block delete, XON/XOFF flow control.
  - Reduce serial read buffer to 128 characters and increased write buffer to 64 characters.
  - Misc bug fixes and removed deprecated acceleration enabled code.

*Important note for Atmega 168 users:* Going forward, support for Atmega 168 will be dropped due to its limited memory and speed. However, legacy Grbl v0.51 "in the branch called 'v0_51' is still available for use.

_The project was initially inspired by the Arduino GCode Interpreter by Mike Ellery_