b51e902530
- Program stop support (M0,M1*,M2,M30*). *Optional stop to be done. *Pallet shuttle not supported. - Work position is set equal to machine position upon reset, as according to NIST RS274-NGC guidelines. G92 is disabled. - Renamed mc_set_current_position() to mc_set_coordinate_offset(). - Fixed bug in plan_synchronize(). Would exit right before last step is finished and caused issues with program stops. Now fixed. - Spindle now stops upon a run-time abort command. - Updated readme and misc upkeeping.
96 lines
3.8 KiB
C
96 lines
3.8 KiB
C
/*
|
|
main.c - An embedded CNC Controller with rs274/ngc (g-code) support
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2011-2012 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <avr/interrupt.h>
|
|
#include <avr/pgmspace.h>
|
|
#include "config.h"
|
|
#include "planner.h"
|
|
#include "nuts_bolts.h"
|
|
#include "stepper.h"
|
|
#include "spindle_control.h"
|
|
#include "motion_control.h"
|
|
#include "gcode.h"
|
|
#include "protocol.h"
|
|
#include "limits.h"
|
|
#include "settings.h"
|
|
#include "serial.h"
|
|
|
|
// Declare system global variable structure
|
|
system_t sys;
|
|
|
|
int main(void)
|
|
{
|
|
// Initialize system
|
|
serial_init(BAUD_RATE); // Setup serial baud rate and interrupts
|
|
st_init(); // Setup stepper pins and interrupt timers
|
|
sei(); // Enable interrupts
|
|
|
|
memset(&sys, 0, sizeof(sys)); // Clear all system variables
|
|
sys.abort = true; // Set abort to complete initialization
|
|
|
|
for(;;) {
|
|
|
|
// Execute system reset upon a system abort, where the main program will return to this loop.
|
|
// Once here, it is safe to re-initialize the system. At startup, the system will automatically
|
|
// reset to finish the initialization process.
|
|
if (sys.abort) {
|
|
|
|
// Retain last known machine position. If the system abort occurred while in motion, machine
|
|
// position is not guaranteed, since a hard stop can cause the steppers to lose steps. Always
|
|
// perform a feedhold before an abort, if maintaining accurate machine position is required.
|
|
// TODO: Report last position and coordinate offset to users to help relocate origins. Future
|
|
// releases will auto-reset the machine position back to [0,0,0] if an abort is used while
|
|
// grbl is moving the machine.
|
|
int32_t last_position[3]; // last_coord_offset[3];
|
|
memcpy(last_position, sys.position, sizeof(sys.position)); // last_position[] = sys.position[]
|
|
// memcpy(last_coord_offset, sys.coord_offset, sizeof(sys.coord_offset)); // last_coord_offset[] = sys.coord_offset[]
|
|
|
|
// Reset system.
|
|
memset(&sys, 0, sizeof(sys)); // Clear all system variables
|
|
serial_reset_read_buffer(); // Clear serial read buffer
|
|
settings_init(); // Load grbl settings from EEPROM
|
|
protocol_init(); // Clear incoming line data
|
|
plan_init(); // Clear block buffer and planner variables
|
|
gc_init(); // Set g-code parser to default state
|
|
spindle_init();
|
|
limits_init();
|
|
st_reset(); // Clear stepper subsystem variables.
|
|
|
|
// Reload last known machine position. Coordinate offsets are reset per NIST RS274-NGC protocol.
|
|
memcpy(sys.position, last_position, sizeof(last_position)); // sys.position[] = last_position[]
|
|
gc_set_current_position(last_position[X_AXIS],last_position[Y_AXIS],last_position[Z_AXIS]);
|
|
plan_set_current_position(last_position[X_AXIS],last_position[Y_AXIS],last_position[Z_AXIS]);
|
|
|
|
// Set system runtime defaults
|
|
// TODO: Eventual move to EEPROM from config.h when all of the new settings are worked out.
|
|
// Mainly to avoid having to maintain several different versions.
|
|
#ifdef CYCLE_AUTO_START
|
|
sys.auto_start = true;
|
|
#endif
|
|
}
|
|
|
|
protocol_execute_runtime();
|
|
protocol_process(); // ... process the serial protocol
|
|
|
|
}
|
|
return 0; /* never reached */
|
|
}
|