ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
42 Commits 2 Branches 14 Tags 2.9 MiB
C 94.3%
C++ 3.2%
Objective-C 1.4%
Makefile 0.9%
Dockerfile 0.2%
65b696f2f9
Go to file
Simen Svale Skogsrud 65b696f2f9 added a simple ruby-script to stream gcode and made serial protocol more reprap-like
2010-01-06 23:49:33 +01:00
arc_algorithm lots and lots of bugfixes after running on reals hardware for the first time 2009-02-03 09:56:45 +01:00
legacy lots and lots of bugfixes after running on reals hardware for the first time 2009-02-03 09:56:45 +01:00
script added a simple ruby-script to stream gcode and made serial protocol more reprap-like 2010-01-06 23:49:33 +01:00
.gitignore minor revision 2010-01-04 16:09:00 +01:00
config.h fixed feed rate calculation 2010-01-06 00:23:07 +01:00
COPYING renamed file 2009-01-26 10:51:02 +01:00
gcode.c removed support for echoing of steps via serial 2010-01-05 22:07:16 +01:00
gcode.h support for helical motion 2009-02-11 00:37:33 +01:00
geometry.c added code to estimate steps in arc in order to support helical motion 2009-02-09 15:47:51 +01:00
geometry.h added code to estimate steps in arc in order to support helical motion 2009-02-09 15:47:51 +01:00
main.c fixed buffering of pace changes and general cleaning 2009-02-08 20:40:24 +01:00
Makefile lots and lots of bugfixes after running on reals hardware for the first time 2009-02-03 09:56:45 +01:00
motion_control.c fixed feed rate calculation 2010-01-06 00:23:28 +01:00
motion_control.h support for helical motion 2009-02-11 00:37:33 +01:00
nuts_bolts.h stepper signals looks good on scope 2009-02-03 23:36:04 +01:00
readme.txt updated readme 2010-01-06 00:31:11 +01:00
serial_protocol.c added a simple ruby-script to stream gcode and made serial protocol more reprap-like 2010-01-06 23:49:33 +01:00
serial_protocol.h presumably fixed the feed rate computation 2009-02-04 14:01:24 +01:00
spindle_control.c version 0.1 2009-01-25 00:48:56 +01:00
spindle_control.h version 0.1 2009-01-25 00:48:56 +01:00
stepper.c fixed en operator precedence bug with step mask calculations 2010-01-05 23:06:47 +01:00
stepper.h support for helical motion 2009-02-11 00:37:33 +01:00
todo.txt minor revision 2010-01-04 16:09:00 +01:00
wiring_private.h version 0.1 2009-01-25 00:48:56 +01:00
wiring_serial.c tweaks and bugfixes 2009-01-29 09:58:29 +01:00
wiring_serial.h version 0.1 2009-01-25 00:48:56 +01:00

readme.txt 

Grbl - An embedded rs274/ngc (g-code) interpreter, CNC controller, readout and exerciser for the AVR series of microcontrollers.
Inspired by the Arduino GCode Interpreter by Mike Ellery

Status:
* Runs on atmega168/arduino.
* GCode interpreter complete
* Linear interpolation machine control complete
* Arcs and helical interpolation complete
* Buffered, non blocking, asynchronous stepping so the rest of the system is free to generate new steps and parse 
  g-code while the steppers are still steppin' 
* Basic serial protocol complete
* Stepper pulses verified on scope and tested with stepper motors, motion and rates verified with simulator,
  but not tested on real CNC-rig. Still waiting for my micRo kit from Lumenlab.com

Pending: 
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
* Optional support for automated cutter length calibration when milling
* Support "headless" fabrication by buffering all code to SD-card or similar
* Smooth feed rate interpolation

Limitations:
* Limited GCode-support. Focus on the kind of GCode produced by CAM tools. Leave human GCoders frustrated.
* No rotation axes, only x, y and z.