Simen Svale Skogsrud
|
dce597be45
|
corrected the handling of status codes so that 'ok' will not be default response in the event of an undefined error code (untested)
|
2011-02-11 23:04:03 +01:00 |
|
Simen Svale Skogsrud
|
9b022a6f4f
|
minor tweak eliminates 'ok' message after errors
|
2011-02-10 17:01:07 +01:00 |
|
Simen Svale Skogsrud
|
6d3ff506e8
|
refactored compile time settings back into a new file called config.h
|
2011-02-05 00:55:37 +01:00 |
|
Simen Svale Skogsrud
|
d00947a23a
|
renamed config.* to settings.*
|
2011-02-05 00:45:41 +01:00 |
|
Simen Svale Skogsrud
|
682e23eb7b
|
added error messages and dropped echoing of command input
|
2011-02-05 00:39:34 +01:00 |
|
Simen Svale Skogsrud
|
4562ee7fe9
|
merged master
|
2011-01-31 19:42:56 +01:00 |
|
Simen Svale Skogsrud
|
35064b53e9
|
made local variables static
|
2011-01-25 23:33:19 +01:00 |
|
Simen Svale Skogsrud
|
4103e6ca00
|
still not running, but a lot further along
|
2011-01-22 23:29:02 +01:00 |
|
Simen Svale Skogsrud
|
49a16cb777
|
refactored block buffer into separate module motion_plan pending the addition of the actual look ahead planner
|
2011-01-14 16:45:18 +01:00 |
|
Simen Svale Skogsrud
|
2f847a1f33
|
support both CR and LF and CRLF line termination
|
2010-07-02 23:23:32 +02:00 |
|
Simen Svale Skogsrud
|
937c70cb50
|
Grbl can now take advantage of the extra memory in the 328
|
2010-03-14 23:45:31 +01:00 |
|
Simen Svale Skogsrud
|
e409f10047
|
moved all strings to pgm-memory
|
2010-03-07 23:10:41 +01:00 |
|
Simen Svale Skogsrud
|
7e152851cc
|
general clean up after refactoring
|
2010-03-03 13:04:51 +01:00 |
|
Simen Svale Skogsrud
|
36fd3a9bfb
|
improved the serial protocol, added some debug pins for a while
|
2010-03-02 08:19:21 +01:00 |
|
Simen Svale Skogsrud
|
a42c03601d
|
Fixed a number of bugs caused by using abs() on floats and long ints. Added support for selectively inverting bits of the stepping port. Debugged, optimized and cleaned up timing code for the step-pulses.
|
2010-02-27 19:55:09 +01:00 |
|
Simen Svale Skogsrud
|
65b696f2f9
|
added a simple ruby-script to stream gcode and made serial protocol more reprap-like
|
2010-01-06 23:49:33 +01:00 |
|
Simen Svale Skogsrud
|
2b0e19993d
|
removed support for echoing of steps via serial
|
2010-01-05 22:07:16 +01:00 |
|
Simen Svale Skogsrud
|
2bd984a734
|
configurations and adjustments to protocol
|
2009-02-15 12:56:07 +01:00 |
|
Simen Svale Skogsrud
|
6c3a6a25d5
|
pace calculation correct, arc algorithm correct, support for negative R
|
2009-02-08 12:24:52 +01:00 |
|
Simen Svale Skogsrud
|
d012440518
|
presumably fixed the feed rate computation
|
2009-02-04 14:01:24 +01:00 |
|
Simen Svale Skogsrud
|
50a9f78088
|
lots and lots of bugfixes after running on reals hardware for the first time
|
2009-02-03 09:56:45 +01:00 |
|
Simen Svale Skogsrud
|
a9d41c6c64
|
tweaks and bugfixes
|
2009-01-29 09:58:29 +01:00 |
|
Simen Svale Skogsrud
|
9df29ad3b3
|
version 0.1
|
2009-01-25 00:48:56 +01:00 |
|