Merge pull request #702 from ashelly/default-split
Moving defaults to individual files in subdirectory
This commit is contained in:
Sonny Jeon
commit
e704862f11
288
grbl/defaults.h
288
grbl/defaults.h
@ -18,318 +18,60 @@
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
our nefarious needs. */
|
||||
/* The defaults.h file serves as a central default settings selector for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
files listed here are supplied by users, so your results may vary. However, this should
|
||||
give you a good starting point as you get to know your machine and tweak the settings for
|
||||
your nefarious needs.
|
||||
Ensure one and only one of these DEFAULTS_XXX values is defined in config.h */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
// Don't #define defaults_h here, let the selected file do it. Prevents incuding more than one.
|
||||
|
||||
#ifdef DEFAULTS_GENERIC
|
||||
// Grbl generic default settings. Should work across different machines.
|
||||
#define DEFAULT_X_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_Y_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_Z_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_X_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_generic.h"
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
#ifdef DEFAULTS_SHERLINE_5400
|
||||
// Description: Sherline 5400 mill with three NEMA 23 Keling KL23H256-21-8B 185 oz-in stepper motors,
|
||||
// driven by three Pololu A4988 stepper drivers with a 30V, 6A power supply at 1.5A per winding.
|
||||
#define MICROSTEPS 2
|
||||
#define STEPS_PER_REV 200.0
|
||||
#define MM_PER_REV (0.050*MM_PER_INCH) // 0.050 inch/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_X_MAX_RATE 635.0 // mm/min (25 ipm)
|
||||
#define DEFAULT_Y_MAX_RATE 635.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 635.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 225.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 125.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 170.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.01 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 50.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 635.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_sherline.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_SHAPEOKO
|
||||
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
||||
// grblShield with a 24V, 4.2A power supply.
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 400
|
||||
#define MM_PER_REV_XY (0.08*18*MM_PER_INCH) // 0.08 in belt pitch, 18 pulley teeth
|
||||
#define MICROSTEPS_Z 2
|
||||
#define STEP_REVS_Z 400
|
||||
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_shapeoko.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_SHAPEOKO_2
|
||||
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
||||
// grblShield at 28V.
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 200
|
||||
#define MM_PER_REV_XY (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define MICROSTEPS_Z 2
|
||||
#define STEP_REVS_Z 200
|
||||
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (250.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (250.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (50.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 290.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 290.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 100.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<X_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_shapeoko2.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_SHAPEOKO_3
|
||||
// Description: Shapeoko CNC mill with three NEMA 23 stepper motors, driven by CarbideMotion
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 200
|
||||
#define MM_PER_REV_XY (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define MICROSTEPS_Z 8
|
||||
#define STEP_REVS_Z 200
|
||||
#define MM_PER_REV_Z (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 425.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 465.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 80.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<X_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK 255 // All enabled
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.01 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 100.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 25 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 5.0 // mm
|
||||
#include "defaults/defaults_shapeoko3.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_ZEN_TOOLWORKS_7x7
|
||||
// Description: Zen Toolworks 7x7 mill with three Shinano SST43D2121 65oz-in NEMA 17 stepper motors.
|
||||
// Leadscrew is different from some ZTW kits, where most are 1.25mm/rev rather than 8.0mm/rev here.
|
||||
// Driven by 30V, 6A power supply and TI DRV8811 stepper motor drivers.
|
||||
#define MICROSTEPS 8
|
||||
#define STEPS_PER_REV 200.0
|
||||
#define MM_PER_REV 8.0 // 8 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_X_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 190.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 180.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 150.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_zen_toolworks_7x7.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_OXCNC
|
||||
// Grbl settings for OpenBuilds OX CNC Machine
|
||||
// http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
|
||||
#define DEFAULT_X_STEPS_PER_MM 26.670
|
||||
#define DEFAULT_Y_STEPS_PER_MM 26.670
|
||||
#define DEFAULT_Z_STEPS_PER_MM 50
|
||||
#define DEFAULT_X_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 500.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 750.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 80.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_oxcnc.h"
|
||||
#endif
|
||||
|
||||
#ifdef DEFAULTS_SIMULATOR
|
||||
// Settings only for Grbl Simulator (www.github.com/grbl/grbl-sim)
|
||||
// Grbl generic default settings. Should work across different machines.
|
||||
#define DEFAULT_X_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_Y_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_Z_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_X_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
#include "defaults/defaults_simulator.h"
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
63
grbl/defaults/defaults_generic.h
Normal file
63
grbl/defaults/defaults_generic.h
Normal file
@ -0,0 +1,63 @@
|
||||
/*
|
||||
defaults_generic.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Grbl generic default settings. Should work across different machines.
|
||||
#define DEFAULT_X_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_Y_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_Z_STEPS_PER_MM 250.0
|
||||
#define DEFAULT_X_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
64
grbl/defaults/defaults_oxcnc.h
Normal file
64
grbl/defaults/defaults_oxcnc.h
Normal file
@ -0,0 +1,64 @@
|
||||
/*
|
||||
defaults_oxcnc.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Grbl settings for OpenBuilds OX CNC Machine
|
||||
// http://www.openbuilds.com/builds/openbuilds-ox-cnc-machine.341/
|
||||
#define DEFAULT_X_STEPS_PER_MM 26.670
|
||||
#define DEFAULT_Y_STEPS_PER_MM 26.670
|
||||
#define DEFAULT_Z_STEPS_PER_MM 50
|
||||
#define DEFAULT_X_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 500.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 750.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 80.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
71
grbl/defaults/defaults_shapeoko.h
Normal file
71
grbl/defaults/defaults_shapeoko.h
Normal file
@ -0,0 +1,71 @@
|
||||
/*
|
||||
defaults_shapeoko.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
|
||||
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
||||
// grblShield with a 24V, 4.2A power supply.
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 400
|
||||
#define MM_PER_REV_XY (0.08*18*MM_PER_INCH) // 0.08 in belt pitch, 18 pulley teeth
|
||||
#define MICROSTEPS_Z 2
|
||||
#define STEP_REVS_Z 400
|
||||
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (15.0*60*60) // 15*60*60 mm/min^2 = 15 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
70
grbl/defaults/defaults_shapeoko2.h
Normal file
70
grbl/defaults/defaults_shapeoko2.h
Normal file
@ -0,0 +1,70 @@
|
||||
/*
|
||||
defaults_shapeoko2.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
||||
// grblShield at 28V.
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 200
|
||||
#define MM_PER_REV_XY (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define MICROSTEPS_Z 2
|
||||
#define STEP_REVS_Z 200
|
||||
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (250.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (250.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (50.0*60*60) // 25*60*60 mm/min^2 = 25 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 290.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 290.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 100.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<X_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
68
grbl/defaults/defaults_shapeoko3.h
Normal file
68
grbl/defaults/defaults_shapeoko3.h
Normal file
@ -0,0 +1,68 @@
|
||||
/*
|
||||
defaults_shapeoko3.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Description: Shapeoko CNC mill with three NEMA 23 stepper motors, driven by CarbideMotion
|
||||
#define MICROSTEPS_XY 8
|
||||
#define STEP_REVS_XY 200
|
||||
#define MM_PER_REV_XY (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define MICROSTEPS_Z 8
|
||||
#define STEP_REVS_Z 200
|
||||
#define MM_PER_REV_Z (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
||||
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
||||
#define DEFAULT_X_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 5000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (400.0*60*60) // 400*60*60 mm/min^2 = 400 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 425.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 465.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 80.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<X_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK 255 // All enabled
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.01 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 100.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 25 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 5.0 // mm
|
||||
|
||||
#endif
|
||||
67
grbl/defaults/defaults_sherline.h
Normal file
67
grbl/defaults/defaults_sherline.h
Normal file
@ -0,0 +1,67 @@
|
||||
/*
|
||||
defaults_sherline.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Description: Sherline 5400 mill with three NEMA 23 Keling KL23H256-21-8B 185 oz-in stepper motors,
|
||||
// driven by three Pololu A4988 stepper drivers with a 30V, 6A power supply at 1.5A per winding.
|
||||
#define MICROSTEPS 2
|
||||
#define STEPS_PER_REV 200.0
|
||||
#define MM_PER_REV (0.050*MM_PER_INCH) // 0.050 inch/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_X_MAX_RATE 635.0 // mm/min (25 ipm)
|
||||
#define DEFAULT_Y_MAX_RATE 635.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 635.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (50.0*60*60) // 50*60*60 mm/min^2 = 50 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 225.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 125.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 170.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS)|(1<<Z_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // true
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 50.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 635.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
64
grbl/defaults/defaults_simulator.h
Normal file
64
grbl/defaults/defaults_simulator.h
Normal file
@ -0,0 +1,64 @@
|
||||
/*
|
||||
defaults_simulator.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Settings only for Grbl Simulator (www.github.com/grbl/grbl-sim)
|
||||
// Grbl generic default settings. Should work across different machines.
|
||||
#define DEFAULT_X_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_Y_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_Z_STEPS_PER_MM 1000.0
|
||||
#define DEFAULT_X_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 1000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (100.0*60*60) // 10*60*60 mm/min^2 = 10 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 1000.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK 0
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
69
grbl/defaults/defaults_zen_toolworks_7x7.h
Normal file
69
grbl/defaults/defaults_zen_toolworks_7x7.h
Normal file
@ -0,0 +1,69 @@
|
||||
/*
|
||||
defaults_zen_toolworks_7x7.h - defaults settings configuration file
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2012-2015 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/* The defaults.h file serves as a central default settings file for different machine
|
||||
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
||||
here are supplied by users, so your results may vary. However, this should give you
|
||||
a good starting point as you get to know your machine and tweak the settings for your
|
||||
nefarious needs. */
|
||||
|
||||
#ifndef defaults_h
|
||||
#define defaults_h
|
||||
|
||||
// Description: Zen Toolworks 7x7 mill with three Shinano SST43D2121 65oz-in NEMA 17 stepper motors.
|
||||
// Leadscrew is different from some ZTW kits, where most are 1.25mm/rev rather than 8.0mm/rev here.
|
||||
// Driven by 30V, 6A power supply and TI DRV8811 stepper motor drivers.
|
||||
#define MICROSTEPS 8
|
||||
#define STEPS_PER_REV 200.0
|
||||
#define MM_PER_REV 8.0 // 8 mm/rev leadscrew
|
||||
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
||||
#define DEFAULT_X_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_Y_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_Z_MAX_RATE 6000.0 // mm/min
|
||||
#define DEFAULT_X_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_Y_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_Z_ACCELERATION (600.0*60*60) // 600*60*60 mm/min^2 = 600 mm/sec^2
|
||||
#define DEFAULT_X_MAX_TRAVEL 190.0 // mm
|
||||
#define DEFAULT_Y_MAX_TRAVEL 180.0 // mm
|
||||
#define DEFAULT_Z_MAX_TRAVEL 150.0 // mm
|
||||
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
||||
#define DEFAULT_STEPPING_INVERT_MASK 0
|
||||
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_AXIS))
|
||||
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
||||
#define DEFAULT_STATUS_REPORT_MASK ((BITFLAG_RT_STATUS_MACHINE_POSITION)|(BITFLAG_RT_STATUS_WORK_POSITION))
|
||||
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
||||
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
||||
#define DEFAULT_REPORT_INCHES 0 // false
|
||||
#define DEFAULT_AUTO_START 1 // true
|
||||
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
||||
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
||||
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_ENABLE 0 // false
|
||||
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
||||
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
||||
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
||||
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
||||
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user