ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
155 Commits 2 Branches 14 Tags 2.9 MiB
C 94.3%
C++ 3.2%
Objective-C 1.4%
Makefile 0.9%
Dockerfile 0.2%
bfd8cfa7dd
Go to file
Simen Svale Skogsrud bfd8cfa7dd slimmed down nuts_bolts
2011-02-11 23:53:58 +01:00
script minor tweak eliminates 'ok' message after errors 2011-02-10 17:01:07 +01:00
.gitignore merged master 2011-01-31 19:42:56 +01:00
config.h refactored compile time settings back into a new file called config.h 2011-02-05 00:55:37 +01:00
COPYING renamed file 2009-01-26 10:51:02 +01:00
eeprom.c formatting 2011-01-31 23:04:39 +01:00
eeprom.h Added runtime configurable global settings with eeprom persitence 2010-03-07 20:29:18 +01:00
gcode.c syntax tweak 2011-02-11 23:53:33 +01:00
gcode.h added error messages and dropped echoing of command input 2011-02-05 00:39:34 +01:00
main.c refactored stepper_plan -> planner (untested) 2011-02-11 00:34:53 +01:00
Makefile refactored stepper_plan -> planner (untested) 2011-02-11 00:34:53 +01:00
motion_control.c eliminated an abstraction violation where motion_control needed position information from the planner (untested) 2011-02-11 23:01:16 +01:00
motion_control.h eliminated an abstraction violation where motion_control needed position information from the planner (untested) 2011-02-11 23:01:16 +01:00
nuts_bolts.h slimmed down nuts_bolts 2011-02-11 23:53:58 +01:00
planner.c slimmed down nuts_bolts 2011-02-11 23:53:58 +01:00
planner.h eliminated an abstraction violation where motion_control needed position information from the planner (untested) 2011-02-11 23:01:16 +01:00
readme.textile updated readme 2011-01-25 14:42:27 +01:00
serial_protocol.c corrected the handling of status codes so that 'ok' will not be default response in the event of an undefined error code (untested) 2011-02-11 23:04:03 +01:00
serial_protocol.h merged master 2011-01-31 19:42:56 +01:00
settings.c replaced use of magical numbers for axis reference with constants 2011-02-06 23:27:04 +01:00
settings.h renamed public methods of settings module to include module name 2011-02-05 01:00:41 +01:00
spindle_control.c refactored compile time settings back into a new file called config.h 2011-02-05 00:55:37 +01:00
spindle_control.h refactored block buffer into separate module motion_plan pending the addition of the actual look ahead planner 2011-01-14 16:45:18 +01:00
stepper.c slimmed down nuts_bolts 2011-02-11 23:53:58 +01:00
stepper.h formatting + moved current position getter to planner 2011-02-11 00:44:18 +01:00
wiring_serial.c added one line to disable baud doubling on Uno 2011-02-11 08:25:49 +01:00
wiring_serial.h moved all strings to pgm-memory 2010-03-07 23:10:41 +01:00

readme.textile 

h1. Grbl - An embedded g-code interpreter and motion-controller for the Arduino/AVR328 microcontroller
    
Grbl is a no-compromise, high performance, low cost alternative to parallel-port-based motion control for CNC milling. It will run on a vanilla Arduino (Duemillanove/Uno) as long as it sports an Atmega 328. 

The controller is written in highly optimized C utilizing every clever feature of the AVR-chips to achieve precise timing and asynchronous operation. It is able to maintain more than 30kHz of stable, jitter free control pulses.

It accepts standards-compliant G-code and has been tested with the output of several CAM tools with no problems. Arcs, circles and helical motion are fully supported - but no support for tool offsets, functions or variables as these are apocryphal and fell into disuse after humans left G-code authoring to machines some time in the 80s.

Grbl includes full acceleration management with look ahead. That means the controller will look up to 20 motions into the future and plan its velocities ahead to deliver smooth acceleration and jerk-free cornering.

h2. Prioritized to-do:

* Backlash compensation
* Autodetect baud rate
* Spindle control
* Arduino IDE compatible (build and flash)
* Support "headless" fabrication by buffering all code to SD-card or similar

_The project was initially inspired by the Arduino GCode Interpreter by Mike Ellery_