ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
59 Commits 2 Branches 14 Tags 2.9 MiB
C 94.3%
C++ 3.2%
Objective-C 1.4%
Makefile 0.9%
Dockerfile 0.2%
b9c3ea02fb
Go to file
Simen Svale Skogsrud b9c3ea02fb adjustments to retriggering protection
2010-03-03 23:18:39 +01:00
gcode first stab at replacing step-buffering with line-buffering 2010-03-02 21:46:51 +01:00
legacy lots and lots of bugfixes after running on reals hardware for the first time 2009-02-03 09:56:45 +01:00
script successfully maintained 30khz, lots of optimization of code and buffering allocation 2010-03-03 00:26:48 +01:00
.gitignore minor revision 2010-01-04 16:09:00 +01:00
config.h general clean up after refactoring 2010-03-03 13:04:51 +01:00
COPYING renamed file 2009-01-26 10:51:02 +01:00
gcode.c minor edit 2010-03-03 18:03:21 +01:00
gcode.h further refactoring debris extraction 2010-03-03 17:52:56 +01:00
main.c general clean up after refactoring 2010-03-03 13:04:51 +01:00
Makefile further refactoring debris extraction 2010-03-03 17:52:56 +01:00
motion_control.c removed void credits 2010-03-03 17:53:46 +01:00
motion_control.h further refactoring debris extraction 2010-03-03 17:52:56 +01:00
nuts_bolts.h further refactoring debris extraction 2010-03-03 17:52:56 +01:00
readme.txt updated readme 2010-01-06 00:31:11 +01:00
serial_protocol.c general clean up after refactoring 2010-03-03 13:04:51 +01:00
serial_protocol.h general clean up after refactoring 2010-03-03 13:04:51 +01:00
spindle_control.c version 0.1 2009-01-25 00:48:56 +01:00
spindle_control.h version 0.1 2009-01-25 00:48:56 +01:00
stepper.c adjustments to retriggering protection 2010-03-03 23:18:39 +01:00
stepper.h further refactoring debris extraction 2010-03-03 17:52:56 +01:00
todo.txt general clean up after refactoring 2010-03-03 13:04:51 +01:00
wiring_private.h version 0.1 2009-01-25 00:48:56 +01:00
wiring_serial.c successfully maintained 30khz, lots of optimization of code and buffering allocation 2010-03-03 00:26:48 +01:00
wiring_serial.h version 0.1 2009-01-25 00:48:56 +01:00

readme.txt 

Grbl - An embedded rs274/ngc (g-code) interpreter, CNC controller, readout and exerciser for the AVR series of microcontrollers.
Inspired by the Arduino GCode Interpreter by Mike Ellery

Status:
* Runs on atmega168/arduino.
* GCode interpreter complete
* Linear interpolation machine control complete
* Arcs and helical interpolation complete
* Buffered, non blocking, asynchronous stepping so the rest of the system is free to generate new steps and parse 
  g-code while the steppers are still steppin' 
* Basic serial protocol complete
* Stepper pulses verified on scope and tested with stepper motors, motion and rates verified with simulator,
  but not tested on real CNC-rig. Still waiting for my micRo kit from Lumenlab.com

Pending: 
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
* Optional support for automated cutter length calibration when milling
* Support "headless" fabrication by buffering all code to SD-card or similar
* Smooth feed rate interpolation

Limitations:
* Limited GCode-support. Focus on the kind of GCode produced by CAM tools. Leave human GCoders frustrated.
* No rotation axes, only x, y and z.