Sonny Jeon 9cabc915ef Runtime command pinned out! Re-organized coolant pins. ...

- Pinned out cycle start(A2), feed hold(A1), and reset(A0) runtime
commands. These pins are held high with the internal pull-up resistor
enabled. All you have to do is connect a normally-open switch to the
pin and ground. That's it.

- Moved the coolant control pins to A3 (and the optional mist control
to A4).

- Moved all of the MASK defines into the config.h file to centralize
them.

2012-11-04 10:48:57 -07:00

15 KiB

Raw Blame History

View Raw