71 lines
3.0 KiB
C
71 lines
3.0 KiB
C
#ifndef config_default_2560_h
|
|
#define config_default_2560_h
|
|
|
|
// Define pin-assignments
|
|
// NOTE: All step bit and direction pins must be on the same port.
|
|
#define STEPPING_DDR DDRA
|
|
#define STEPPING_PORT PORTA
|
|
#define STEPPING_PIN PINA
|
|
#define X_STEP_BIT 0 // MEGA2560 Digital Pin 22
|
|
#define Y_STEP_BIT 2 // MEGA2560 Digital Pin 24
|
|
#define Z_STEP_BIT 4 // MEGA2560 Digital Pin 26
|
|
#define C_STEP_BIT 6 // MEGA2560 Digital Pin 28
|
|
#define X_DIRECTION_BIT 1 // MEGA2560 Digital Pin 23
|
|
#define Y_DIRECTION_BIT 3 // MEGA2560 Digital Pin 25
|
|
#define Z_DIRECTION_BIT 5 // MEGA2560 Digital Pin 27
|
|
#define C_DIRECTION_BIT 7 // MEGA2560 Digital Pin 29
|
|
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
|
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
|
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
|
|
|
#define STEPPERS_DISABLE_DDR DDRC
|
|
#define STEPPERS_DISABLE_PORT PORTC
|
|
#define STEPPERS_DISABLE_BIT 7 // MEGA2560 Digital Pin 30
|
|
#define STEPPERS_DISABLE_MASK (1<<STEPPERS_DISABLE_BIT)
|
|
|
|
// NOTE: All limit bit pins must be on the same port
|
|
#define LIMIT_DDR DDRC
|
|
#define LIMIT_PORT PORTC
|
|
#define LIMIT_PIN PINC
|
|
#define X_LIMIT_BIT 6 // MEGA2560 Digital Pin 31
|
|
#define Y_LIMIT_BIT 5 // MEGA2560 Digital Pin 32
|
|
#define Z_LIMIT_BIT 4 // MEGA2560 Digital Pin 33
|
|
#define C_LIMIT_BIT 3 // MEGA2560 Digital Pin 34
|
|
#define LIMIT_INT PCIE0 // Pin change interrupt enable pin
|
|
#define LIMIT_INT_vect PCINT0_vect
|
|
#define LIMIT_PCMSK PCMSK0 // Pin change interrupt register
|
|
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
|
|
|
#define SPINDLE_ENABLE_DDR DDRC
|
|
#define SPINDLE_ENABLE_PORT PORTC
|
|
#define SPINDLE_ENABLE_BIT 2 // MEGA2560 Digital Pin 35
|
|
|
|
#define SPINDLE_DIRECTION_DDR DDRC
|
|
#define SPINDLE_DIRECTION_PORT PORTC
|
|
#define SPINDLE_DIRECTION_BIT 1 // MEGA2560 Digital Pin 36
|
|
|
|
#define COOLANT_FLOOD_DDR DDRC
|
|
#define COOLANT_FLOOD_PORT PORTC
|
|
#define COOLANT_FLOOD_BIT 0 // MEGA2560 Digital Pin 37
|
|
|
|
// NOTE: Uno analog pins 4 and 5 are reserved for an i2c interface, and may be installed at
|
|
// a later date if flash and memory space allows.
|
|
// #define ENABLE_M7 // Mist coolant disabled by default. Uncomment to enable.
|
|
#ifdef ENABLE_M7
|
|
#define COOLANT_MIST_DDR DDRC
|
|
#define COOLANT_MIST_PORT PORTC
|
|
#define COOLANT_MIST_BIT 0 // MEGA2560 Digital Pin 37
|
|
#endif
|
|
|
|
// NOTE: All pinouts pins must be on the same port
|
|
#define PINOUT_DDR DDRC
|
|
#define PINOUT_PIN PINC
|
|
#define PINOUT_PORT PORTC
|
|
#define PIN_RESET 0 // Uno Analog Pin 0
|
|
#define PIN_FEED_HOLD 1 // Uno Analog Pin 1
|
|
#define PIN_CYCLE_START 2 // Uno Analog Pin 2
|
|
#define PINOUT_INT PCIE1 // Pin change interrupt enable pin
|
|
#define PINOUT_INT_vect PCINT1_vect
|
|
#define PINOUT_PCMSK PCMSK1 // Pin change interrupt register
|
|
#define PINOUT_MASK ((1<<PIN_RESET)|(1<<PIN_FEED_HOLD)|(1<<PIN_CYCLE_START))
|