ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity
6 Commits 2 Branches 14 Tags 2.9 MiB
C 94.3%
C++ 3.2%
Objective-C 1.4%
Makefile 0.9%
Dockerfile 0.2%
3ead6a02e7
Go to file
Simen Svale Skogsrud 3ead6a02e7 minor edit
2009-01-27 11:22:04 +01:00
arc_algorithm added testbed for the arc interpolator i will be using 2009-01-27 10:56:47 +01:00
config.h version 0.1 2009-01-25 00:48:56 +01:00
COPYING renamed file 2009-01-26 10:51:02 +01:00
gcode.c version 0.1 2009-01-25 00:48:56 +01:00
gcode.h version 0.1 2009-01-25 00:48:56 +01:00
main.c version 0.1 2009-01-25 00:48:56 +01:00
Makefile version 0.1 2009-01-25 00:48:56 +01:00
motion_control.c version 0.1 2009-01-25 00:48:56 +01:00
motion_control.h version 0.1 2009-01-25 00:48:56 +01:00
nuts_bolts.h version 0.1 2009-01-25 00:48:56 +01:00
readme.txt minor edit 2009-01-27 11:22:04 +01:00
serial_protocol.c version 0.1 2009-01-25 00:48:56 +01:00
serial_protocol.h version 0.1 2009-01-25 00:48:56 +01:00
spindle_control.c version 0.1 2009-01-25 00:48:56 +01:00
spindle_control.h version 0.1 2009-01-25 00:48:56 +01:00
todo.txt version 0.1 2009-01-25 00:48:56 +01:00
wiring_private.h version 0.1 2009-01-25 00:48:56 +01:00
wiring_serial.c version 0.1 2009-01-25 00:48:56 +01:00
wiring_serial.h version 0.1 2009-01-25 00:48:56 +01:00

readme.txt 

Grbl - An embedded rs274/ngc (g-code) interpreter, cartesian bot controller, readout and exerciser for the AVR series of microcontrollers.
Inspired by the Arduino GCode Interpreter by Mike Ellery

Status:
* Linear interpolation machine control complete (No arcs yet)
* GCode interpreter complete
* Basic serial protocol complete
* As of yet completely untested in a real environemnt. Still waiting for my micRo kit from Lumenlab.com

Goals: 
* Runs on the atmega168
* Runs on a standard Arduino
* Suitable for both milling and deposition fabrication
* Support GCode from common free and cheap CAM-packages right out of the box
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
* Optional support for automated cutter length calibration when milling
* Support "headless" fabrication by buffering all code to SD-card or similar

Limitations:
* Limited GCode-support. Focus on the kind of GCode produced by CAM tools. Leave human GCoders frustrated.
* No rotation axes, only x,y and z.