ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

corrections in planner, including speed estimation

Browse Source
This commit is contained in:
Simen Svale Skogsrud 2011-02-10 13:06:18 +01:00
parent fd18ab455f
commit f95f48763a
1 changed files with 13 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
stepper_plan.c
View File

@ -332,7 +332,11 @@ void plan_buffer_line(double x, double y, double z, double feed_rate, int invert
int32_t target[3];
target[X_AXIS] = lround(x*settings.steps_per_mm[X_AXIS]);
target[Y_AXIS] = lround(y*settings.steps_per_mm[Y_AXIS]);
target[Z_AXIS] = lround(y*settings.steps_per_mm[Z_AXIS]);
target[Z_AXIS] = lround(z*settings.steps_per_mm[Z_AXIS]);
double delta_x = (target[X_AXIS]-position[X_AXIS]);
double delta_y = (target[Y_AXIS]-position[Y_AXIS]);
double delta_z = (target[Z_AXIS]-position[Z_AXIS]);
// Calculate the buffer head after we push this byte
int next_buffer_head = (block_buffer_head + 1) % BLOCK_BUFFER_SIZE;
@ -342,9 +346,9 @@ void plan_buffer_line(double x, double y, double z, double feed_rate, int invert
// Prepare to set up new block
block_t *block = &block_buffer[block_buffer_head];
// Number of steps for each axis
block->steps_x = labs(position[X_AXIS]-target[X_AXIS]);
block->steps_y = labs(position[Y_AXIS]-target[Y_AXIS]);
block->steps_z = labs(position[Z_AXIS]-target[Z_AXIS]);
block->steps_x = labs(delta_x);
block->steps_y = labs(delta_y);
block->steps_z = labs(delta_z);
block->millimeters = sqrt(
square(block->steps_x/settings.steps_per_mm[X_AXIS])+
square(block->steps_y/settings.steps_per_mm[Y_AXIS])+
@ -363,9 +367,10 @@ void plan_buffer_line(double x, double y, double z, double feed_rate, int invert
// Calculate speed in mm/minute for each axis
double multiplier = 60.0*1000000.0/microseconds;
block->speed_x = x*multiplier;
block->speed_y = y*multiplier;
block->speed_z = z*multiplier;
block->speed_x = (delta_x)*multiplier;
block->speed_y = (delta_y)*multiplier;
block->speed_z = (delta_z)*multiplier;
// HER ER FEILEN. BEREGNINGEN AV HASTIGHETEN ER PÅ TOK
block->nominal_speed = block->millimeters*multiplier;
block->nominal_rate = ceil(block->step_event_count*multiplier);
block->entry_factor = 0.0;
@ -402,6 +407,6 @@ void plan_buffer_line(double x, double y, double z, double feed_rate, int invert
// Update position
memcpy(position, target, sizeof(target)); // position[] = target[]
if (acceleration_manager_enabled) { planner_recalculate(); }
if (acceleration_manager_enabled) { planner_recalculate(); }
}