ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Support coolant flood and mist for remix board

Browse Source
This commit is contained in:
cprezzi
2017-08-03 15:01:34 +02:00
parent 436615095f
commit dc92bf565e
2 changed files with 13 additions and 12 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
grbl/config.h
View File

@ -33,9 +33,9 @@
// Define board type for pin map and default settings.
//#define CPU_MAP_SMOOTHIEBOARD // Smoothieboard (NXP LPC1769 MCU)
//#define CPU_MAP_C3D_REMIX // Cohesion3D Remix (NXP LPC1769 MCU)
#define CPU_MAP_C3D_REMIX // Cohesion3D Remix (NXP LPC1769 MCU)
//#define CPU_MAP_C3D_MINI // Cohesion3D Mini (NXP LPC1769 MCU)
#define CPU_MAP_MKS_SBASE // MKS SBASE Board (NXP LPC1768 MCU)
//#define CPU_MAP_MKS_SBASE // MKS SBASE Board (NXP LPC1768 MCU)
//#define CPU_MAP_AZTEEG_X5 // Azteeg X5 Board (NXP LPC1769 MCU)
// Define machine type for machine specific defaults
@ -176,7 +176,7 @@
// Enables a second coolant control pin via the mist coolant g-code command M7 on the Arduino Uno
// analog pin 4. Only use this option if you require a second coolant control pin.
// NOTE: The M8 flood coolant control pin on analog pin 3 will still be functional regardless.
// #define ENABLE_M7 // Disabled by default. Uncomment to enable.
//#define ENABLE_M7 // Disabled by default. Uncomment to enable.
// This option causes the feed hold input to act as a safety door switch. A safety door, when triggered,
// immediately forces a feed hold and then safely de-energizes the machine. Resuming is blocked until
@ -569,7 +569,7 @@
// LPC176x flash blocks have a rating of 10,000 write cycles. To prevent excess wear, we don't
// write G10, G28.1, and G30.1. Uncomment to enable these writes.
// #define STORE_COORD_DATA // Default disabled. Uncomment to enable.
#define STORE_COORD_DATA // Default disabled. Uncomment to enable.
// In Grbl v0.9 and prior, there is an old outstanding bug where the `WPos:` work position reported
// may not correlate to what is executing, because `WPos:` is based on the g-code parser state, which