Sanguino compile patch
@daapp : Sanguino compile serial USART path. Thanks!
This commit is contained in:
Sonny Jeon
parent
5e7a4b3ba8
commit
baf137882b
8
serial.c
8
serial.c
@ -91,7 +91,11 @@ void serial_write(uint8_t data) {
|
||||
}
|
||||
|
||||
// Data Register Empty Interrupt handler
|
||||
#ifdef __AVR_ATmega644P__
|
||||
ISR(USART0_UDRE_vect)
|
||||
#else
|
||||
ISR(USART_UDRE_vect)
|
||||
#endif
|
||||
{
|
||||
// Temporary tx_buffer_tail (to optimize for volatile)
|
||||
uint8_t tail = tx_buffer_tail;
|
||||
@ -140,7 +144,11 @@ uint8_t serial_read()
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef __AVR_ATmega644P__
|
||||
ISR(USART0_RX_vect)
|
||||
#else
|
||||
ISR(USART_RX_vect)
|
||||
#endif
|
||||
{
|
||||
uint8_t data = UDR0;
|
||||
uint8_t next_head;
|
||||
|
||||
445
settings.c
445
settings.c
@ -1,223 +1,222 @@
|
||||
/*
|
||||
settings.c - eeprom configuration handling
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
||||
Copyright (c) 2011-2012 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "protocol.h"
|
||||
#include "report.h"
|
||||
#include "stepper.h"
|
||||
#include "nuts_bolts.h"
|
||||
#include "settings.h"
|
||||
#include "eeprom.h"
|
||||
|
||||
settings_t settings;
|
||||
|
||||
// Version 4 outdated settings record
|
||||
typedef struct {
|
||||
float steps_per_mm[3];
|
||||
uint8_t microsteps;
|
||||
uint8_t pulse_microseconds;
|
||||
float default_feed_rate;
|
||||
float default_seek_rate;
|
||||
uint8_t invert_mask;
|
||||
float mm_per_arc_segment;
|
||||
float acceleration;
|
||||
float junction_deviation;
|
||||
} settings_v4_t;
|
||||
|
||||
|
||||
// Method to store startup lines into EEPROM
|
||||
void settings_store_startup_line(uint8_t n, char *line)
|
||||
{
|
||||
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
||||
memcpy_to_eeprom_with_checksum(addr,(char*)line, LINE_BUFFER_SIZE);
|
||||
}
|
||||
|
||||
// Method to store coord data parameters into EEPROM
|
||||
void settings_write_coord_data(uint8_t coord_select, float *coord_data)
|
||||
{
|
||||
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
||||
memcpy_to_eeprom_with_checksum(addr,(char*)coord_data, sizeof(float)*N_AXIS);
|
||||
}
|
||||
|
||||
// Method to store Grbl global settings struct and version number into EEPROM
|
||||
void write_global_settings()
|
||||
{
|
||||
eeprom_put_char(0, SETTINGS_VERSION);
|
||||
memcpy_to_eeprom_with_checksum(EEPROM_ADDR_GLOBAL, (char*)&settings, sizeof(settings_t));
|
||||
}
|
||||
|
||||
// Method to reset Grbl global settings back to defaults.
|
||||
void settings_reset(bool reset_all) {
|
||||
// Reset all settings or only the migration settings to the new version.
|
||||
if (reset_all) {
|
||||
settings.steps_per_mm[X_AXIS] = DEFAULT_X_STEPS_PER_MM;
|
||||
settings.steps_per_mm[Y_AXIS] = DEFAULT_Y_STEPS_PER_MM;
|
||||
settings.steps_per_mm[Z_AXIS] = DEFAULT_Z_STEPS_PER_MM;
|
||||
settings.pulse_microseconds = DEFAULT_STEP_PULSE_MICROSECONDS;
|
||||
settings.default_feed_rate = DEFAULT_FEEDRATE;
|
||||
settings.default_seek_rate = DEFAULT_RAPID_FEEDRATE;
|
||||
settings.acceleration = DEFAULT_ACCELERATION;
|
||||
settings.mm_per_arc_segment = DEFAULT_MM_PER_ARC_SEGMENT;
|
||||
settings.invert_mask = DEFAULT_STEPPING_INVERT_MASK;
|
||||
settings.junction_deviation = DEFAULT_JUNCTION_DEVIATION;
|
||||
}
|
||||
// New settings since last version
|
||||
settings.flags = 0;
|
||||
if (DEFAULT_REPORT_INCHES) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
||||
if (DEFAULT_AUTO_START) { settings.flags |= BITFLAG_AUTO_START; }
|
||||
if (DEFAULT_INVERT_ST_ENABLE) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
||||
if (DEFAULT_HARD_LIMIT_ENABLE) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
if (DEFAULT_HOMING_ENABLE) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
||||
settings.homing_dir_mask = DEFAULT_HOMING_DIR_MASK;
|
||||
settings.homing_feed_rate = DEFAULT_HOMING_FEEDRATE;
|
||||
settings.homing_seek_rate = DEFAULT_HOMING_RAPID_FEEDRATE;
|
||||
settings.homing_debounce_delay = DEFAULT_HOMING_DEBOUNCE_DELAY;
|
||||
settings.homing_pulloff = DEFAULT_HOMING_PULLOFF;
|
||||
settings.stepper_idle_lock_time = DEFAULT_STEPPER_IDLE_LOCK_TIME;
|
||||
settings.decimal_places = DEFAULT_DECIMAL_PLACES;
|
||||
settings.n_arc_correction = DEFAULT_N_ARC_CORRECTION;
|
||||
write_global_settings();
|
||||
}
|
||||
|
||||
// Reads startup line from EEPROM. Updated pointed line string data.
|
||||
uint8_t settings_read_startup_line(uint8_t n, char *line)
|
||||
{
|
||||
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)line, addr, LINE_BUFFER_SIZE))) {
|
||||
// Reset line with default value
|
||||
// TODO: Need to come up with a method to do this.
|
||||
line[0] = 0;
|
||||
settings_store_startup_line(n, line);
|
||||
return(false);
|
||||
} else {
|
||||
return(true);
|
||||
}
|
||||
}
|
||||
|
||||
// Read selected coordinate data from EEPROM. Updates pointed coord_data value.
|
||||
uint8_t settings_read_coord_data(uint8_t coord_select, float *coord_data)
|
||||
{
|
||||
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)coord_data, addr, sizeof(float)*N_AXIS))) {
|
||||
// Reset with default zero vector
|
||||
clear_vector_float(coord_data);
|
||||
settings_write_coord_data(coord_select,coord_data);
|
||||
return(false);
|
||||
} else {
|
||||
return(true);
|
||||
}
|
||||
}
|
||||
|
||||
// Reads Grbl global settings struct from EEPROM.
|
||||
uint8_t read_global_settings() {
|
||||
// Check version-byte of eeprom
|
||||
uint8_t version = eeprom_get_char(0);
|
||||
|
||||
if (version == SETTINGS_VERSION) {
|
||||
// Read settings-record and check checksum
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, EEPROM_ADDR_GLOBAL, sizeof(settings_t)))) {
|
||||
return(false);
|
||||
}
|
||||
} else {
|
||||
if (version <= 4) {
|
||||
// Migrate from settings version 4 to current version.
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, 1, sizeof(settings_v4_t)))) {
|
||||
return(false);
|
||||
}
|
||||
settings_reset(false); // Old settings ok. Write new settings only.
|
||||
} else {
|
||||
return(false);
|
||||
}
|
||||
}
|
||||
return(true);
|
||||
}
|
||||
|
||||
|
||||
// A helper method to set settings from command line
|
||||
uint8_t settings_store_global_setting(int parameter, float value) {
|
||||
switch(parameter) {
|
||||
case 0: case 1: case 2:
|
||||
if (value <= 0.0) { return(STATUS_SETTING_VALUE_NEG); }
|
||||
settings.steps_per_mm[parameter] = value; break;
|
||||
case 3:
|
||||
if (value < 3) { return(STATUS_SETTING_STEP_PULSE_MIN); }
|
||||
settings.pulse_microseconds = round(value); break;
|
||||
case 4: settings.default_feed_rate = value; break;
|
||||
case 5: settings.default_seek_rate = value; break;
|
||||
case 6: settings.invert_mask = trunc(value); break;
|
||||
case 7: settings.stepper_idle_lock_time = round(value); break;
|
||||
case 8: settings.acceleration = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
||||
case 9: settings.junction_deviation = fabs(value); break;
|
||||
case 10: settings.mm_per_arc_segment = value; break;
|
||||
case 11: settings.n_arc_correction = round(value); break;
|
||||
case 12: settings.decimal_places = round(value); break;
|
||||
case 13:
|
||||
if (value) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
||||
else { settings.flags &= ~BITFLAG_REPORT_INCHES; }
|
||||
break;
|
||||
case 14: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_AUTO_START; }
|
||||
else { settings.flags &= ~BITFLAG_AUTO_START; }
|
||||
break;
|
||||
case 15: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
||||
else { settings.flags &= ~BITFLAG_INVERT_ST_ENABLE; }
|
||||
break;
|
||||
case 16: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
else { settings.flags &= ~BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
break;
|
||||
case 17:
|
||||
if (value) {
|
||||
settings.flags |= BITFLAG_HOMING_ENABLE;
|
||||
sys.state = STATE_ALARM;
|
||||
report_feedback_message(MESSAGE_HOMING_ALARM);
|
||||
} else { settings.flags &= ~BITFLAG_HOMING_ENABLE; }
|
||||
break;
|
||||
case 18: settings.homing_dir_mask = trunc(value); break;
|
||||
case 19: settings.homing_feed_rate = value; break;
|
||||
case 20: settings.homing_seek_rate = value; break;
|
||||
case 21: settings.homing_debounce_delay = round(value); break;
|
||||
case 22: settings.homing_pulloff = value; break;
|
||||
default:
|
||||
return(STATUS_INVALID_STATEMENT);
|
||||
}
|
||||
write_global_settings();
|
||||
return(STATUS_OK);
|
||||
}
|
||||
|
||||
// Initialize the config subsystem
|
||||
void settings_init() {
|
||||
if(!read_global_settings()) {
|
||||
report_status_message(STATUS_SETTING_READ_FAIL);
|
||||
settings_reset(true);
|
||||
report_grbl_settings();
|
||||
}
|
||||
// Read all parameter data into a dummy variable. If error, reset to zero, otherwise do nothing.
|
||||
float coord_data[N_AXIS];
|
||||
uint8_t i;
|
||||
for (i=0; i<=SETTING_INDEX_NCOORD; i++) {
|
||||
if (!settings_read_coord_data(i, coord_data)) {
|
||||
report_status_message(STATUS_SETTING_READ_FAIL);
|
||||
}
|
||||
}
|
||||
// NOTE: Startup lines are handled and called by protocol_init().
|
||||
}
|
||||
/*
|
||||
settings.c - eeprom configuration handling
|
||||
Part of Grbl
|
||||
|
||||
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
||||
Copyright (c) 2011-2012 Sungeun K. Jeon
|
||||
|
||||
Grbl is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Grbl is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include "protocol.h"
|
||||
#include "report.h"
|
||||
#include "stepper.h"
|
||||
#include "nuts_bolts.h"
|
||||
#include "settings.h"
|
||||
#include "eeprom.h"
|
||||
|
||||
settings_t settings;
|
||||
|
||||
// Version 4 outdated settings record
|
||||
typedef struct {
|
||||
float steps_per_mm[3];
|
||||
uint8_t microsteps;
|
||||
uint8_t pulse_microseconds;
|
||||
float default_feed_rate;
|
||||
float default_seek_rate;
|
||||
uint8_t invert_mask;
|
||||
float mm_per_arc_segment;
|
||||
float acceleration;
|
||||
float junction_deviation;
|
||||
} settings_v4_t;
|
||||
|
||||
|
||||
// Method to store startup lines into EEPROM
|
||||
void settings_store_startup_line(uint8_t n, char *line)
|
||||
{
|
||||
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
||||
memcpy_to_eeprom_with_checksum(addr,(char*)line, LINE_BUFFER_SIZE);
|
||||
}
|
||||
|
||||
// Method to store coord data parameters into EEPROM
|
||||
void settings_write_coord_data(uint8_t coord_select, float *coord_data)
|
||||
{
|
||||
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
||||
memcpy_to_eeprom_with_checksum(addr,(char*)coord_data, sizeof(float)*N_AXIS);
|
||||
}
|
||||
|
||||
// Method to store Grbl global settings struct and version number into EEPROM
|
||||
void write_global_settings()
|
||||
{
|
||||
eeprom_put_char(0, SETTINGS_VERSION);
|
||||
memcpy_to_eeprom_with_checksum(EEPROM_ADDR_GLOBAL, (char*)&settings, sizeof(settings_t));
|
||||
}
|
||||
|
||||
// Method to reset Grbl global settings back to defaults.
|
||||
void settings_reset(bool reset_all) {
|
||||
// Reset all settings or only the migration settings to the new version.
|
||||
if (reset_all) {
|
||||
settings.steps_per_mm[X_AXIS] = DEFAULT_X_STEPS_PER_MM;
|
||||
settings.steps_per_mm[Y_AXIS] = DEFAULT_Y_STEPS_PER_MM;
|
||||
settings.steps_per_mm[Z_AXIS] = DEFAULT_Z_STEPS_PER_MM;
|
||||
settings.pulse_microseconds = DEFAULT_STEP_PULSE_MICROSECONDS;
|
||||
settings.default_feed_rate = DEFAULT_FEEDRATE;
|
||||
settings.default_seek_rate = DEFAULT_RAPID_FEEDRATE;
|
||||
settings.acceleration = DEFAULT_ACCELERATION;
|
||||
settings.mm_per_arc_segment = DEFAULT_MM_PER_ARC_SEGMENT;
|
||||
settings.invert_mask = DEFAULT_STEPPING_INVERT_MASK;
|
||||
settings.junction_deviation = DEFAULT_JUNCTION_DEVIATION;
|
||||
}
|
||||
// New settings since last version
|
||||
settings.flags = 0;
|
||||
if (DEFAULT_REPORT_INCHES) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
||||
if (DEFAULT_AUTO_START) { settings.flags |= BITFLAG_AUTO_START; }
|
||||
if (DEFAULT_INVERT_ST_ENABLE) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
||||
if (DEFAULT_HARD_LIMIT_ENABLE) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
if (DEFAULT_HOMING_ENABLE) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
||||
settings.homing_dir_mask = DEFAULT_HOMING_DIR_MASK;
|
||||
settings.homing_feed_rate = DEFAULT_HOMING_FEEDRATE;
|
||||
settings.homing_seek_rate = DEFAULT_HOMING_RAPID_FEEDRATE;
|
||||
settings.homing_debounce_delay = DEFAULT_HOMING_DEBOUNCE_DELAY;
|
||||
settings.homing_pulloff = DEFAULT_HOMING_PULLOFF;
|
||||
settings.stepper_idle_lock_time = DEFAULT_STEPPER_IDLE_LOCK_TIME;
|
||||
settings.decimal_places = DEFAULT_DECIMAL_PLACES;
|
||||
settings.n_arc_correction = DEFAULT_N_ARC_CORRECTION;
|
||||
write_global_settings();
|
||||
}
|
||||
|
||||
// Reads startup line from EEPROM. Updated pointed line string data.
|
||||
uint8_t settings_read_startup_line(uint8_t n, char *line)
|
||||
{
|
||||
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)line, addr, LINE_BUFFER_SIZE))) {
|
||||
// Reset line with default value
|
||||
line[0] = 0;
|
||||
settings_store_startup_line(n, line);
|
||||
return(false);
|
||||
} else {
|
||||
return(true);
|
||||
}
|
||||
}
|
||||
|
||||
// Read selected coordinate data from EEPROM. Updates pointed coord_data value.
|
||||
uint8_t settings_read_coord_data(uint8_t coord_select, float *coord_data)
|
||||
{
|
||||
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)coord_data, addr, sizeof(float)*N_AXIS))) {
|
||||
// Reset with default zero vector
|
||||
clear_vector_float(coord_data);
|
||||
settings_write_coord_data(coord_select,coord_data);
|
||||
return(false);
|
||||
} else {
|
||||
return(true);
|
||||
}
|
||||
}
|
||||
|
||||
// Reads Grbl global settings struct from EEPROM.
|
||||
uint8_t read_global_settings() {
|
||||
// Check version-byte of eeprom
|
||||
uint8_t version = eeprom_get_char(0);
|
||||
|
||||
if (version == SETTINGS_VERSION) {
|
||||
// Read settings-record and check checksum
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, EEPROM_ADDR_GLOBAL, sizeof(settings_t)))) {
|
||||
return(false);
|
||||
}
|
||||
} else {
|
||||
if (version <= 4) {
|
||||
// Migrate from settings version 4 to current version.
|
||||
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, 1, sizeof(settings_v4_t)))) {
|
||||
return(false);
|
||||
}
|
||||
settings_reset(false); // Old settings ok. Write new settings only.
|
||||
} else {
|
||||
return(false);
|
||||
}
|
||||
}
|
||||
return(true);
|
||||
}
|
||||
|
||||
|
||||
// A helper method to set settings from command line
|
||||
uint8_t settings_store_global_setting(int parameter, float value) {
|
||||
switch(parameter) {
|
||||
case 0: case 1: case 2:
|
||||
if (value <= 0.0) { return(STATUS_SETTING_VALUE_NEG); }
|
||||
settings.steps_per_mm[parameter] = value; break;
|
||||
case 3:
|
||||
if (value < 3) { return(STATUS_SETTING_STEP_PULSE_MIN); }
|
||||
settings.pulse_microseconds = round(value); break;
|
||||
case 4: settings.default_feed_rate = value; break;
|
||||
case 5: settings.default_seek_rate = value; break;
|
||||
case 6: settings.invert_mask = trunc(value); break;
|
||||
case 7: settings.stepper_idle_lock_time = round(value); break;
|
||||
case 8: settings.acceleration = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
||||
case 9: settings.junction_deviation = fabs(value); break;
|
||||
case 10: settings.mm_per_arc_segment = value; break;
|
||||
case 11: settings.n_arc_correction = round(value); break;
|
||||
case 12: settings.decimal_places = round(value); break;
|
||||
case 13:
|
||||
if (value) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
||||
else { settings.flags &= ~BITFLAG_REPORT_INCHES; }
|
||||
break;
|
||||
case 14: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_AUTO_START; }
|
||||
else { settings.flags &= ~BITFLAG_AUTO_START; }
|
||||
break;
|
||||
case 15: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
||||
else { settings.flags &= ~BITFLAG_INVERT_ST_ENABLE; }
|
||||
break;
|
||||
case 16: // Reboot to ensure change
|
||||
if (value) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
else { settings.flags &= ~BITFLAG_HARD_LIMIT_ENABLE; }
|
||||
break;
|
||||
case 17:
|
||||
if (value) {
|
||||
settings.flags |= BITFLAG_HOMING_ENABLE;
|
||||
sys.state = STATE_ALARM;
|
||||
report_feedback_message(MESSAGE_HOMING_ALARM);
|
||||
} else { settings.flags &= ~BITFLAG_HOMING_ENABLE; }
|
||||
break;
|
||||
case 18: settings.homing_dir_mask = trunc(value); break;
|
||||
case 19: settings.homing_feed_rate = value; break;
|
||||
case 20: settings.homing_seek_rate = value; break;
|
||||
case 21: settings.homing_debounce_delay = round(value); break;
|
||||
case 22: settings.homing_pulloff = value; break;
|
||||
default:
|
||||
return(STATUS_INVALID_STATEMENT);
|
||||
}
|
||||
write_global_settings();
|
||||
return(STATUS_OK);
|
||||
}
|
||||
|
||||
// Initialize the config subsystem
|
||||
void settings_init() {
|
||||
if(!read_global_settings()) {
|
||||
report_status_message(STATUS_SETTING_READ_FAIL);
|
||||
settings_reset(true);
|
||||
report_grbl_settings();
|
||||
}
|
||||
// Read all parameter data into a dummy variable. If error, reset to zero, otherwise do nothing.
|
||||
float coord_data[N_AXIS];
|
||||
uint8_t i;
|
||||
for (i=0; i<=SETTING_INDEX_NCOORD; i++) {
|
||||
if (!settings_read_coord_data(i, coord_data)) {
|
||||
report_status_message(STATUS_SETTING_READ_FAIL);
|
||||
}
|
||||
}
|
||||
// NOTE: Startup lines are handled and called by main.c at the end of initialization.
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user