ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Error corrected in config.h (missing ")" on LIMIT_MASK)

Browse Source
This commit is contained in:
cprezzi 2017-05-10 18:11:28 +02:00
parent 0471485259
commit b48c3c7c51
1 changed files with 1 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
grbl/config.h
View File

@ -36,7 +36,6 @@
// one configuration file by placing their specific defaults and pin map at the bottom of this file.
// If doing so, simply comment out these two defines and see instructions below.
// #define DEFAULTS_GENERIC
#define DEFAULTS_K40
// #define CPU_MAP_ATMEGA328P // Arduino Uno CPU
// Serial baud rate
@ -667,7 +666,7 @@
#define X_LIMIT_BIT 24 // X-MIN=24, X-MAX=25
#define Y_LIMIT_BIT 27 // Y-MIN=26, Y-MAX=27
#define Z_LIMIT_BIT 29 // Z-MIN=28, Z-MAX=29
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT) //|(1<<Z_LIMIT_BIT)) // All limit bits
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)) //|(1<<Z_LIMIT_BIT)) // All limit bits
// hard limits not ported #define LIMIT_INT PCIE0 // Pin change interrupt enable pin
// hard limits not ported #define LIMIT_INT_vect PCINT0_vect
// hard limits not ported #define LIMIT_PCMSK PCMSK0 // Pin change interrupt register