ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Clean up dummy regs

Browse Source
This commit is contained in:
Todd Fleming
2017-01-17 14:46:12 -05:00
parent 3ebbfa4dd3
commit b1d83c2892
4 changed files with 21 additions and 107 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
grbl/config.h
View File

@ -677,32 +677,32 @@
*/
// Define flood and mist coolant enable output pins.
#define COOLANT_FLOOD_DDR DDRC
#define COOLANT_FLOOD_PORT PORTC
#define COOLANT_FLOOD_DDR NotUsed
#define COOLANT_FLOOD_PORT NotUsed
#define COOLANT_FLOOD_BIT 3 // Uno Analog Pin 3
#define COOLANT_MIST_DDR DDRC
#define COOLANT_MIST_PORT PORTC
#define COOLANT_MIST_DDR NotUsed
#define COOLANT_MIST_PORT NotUsed
#define COOLANT_MIST_BIT 4 // Uno Analog Pin 3
// Define user-control controls (cycle start, reset, feed hold) input pins.
// NOTE: All CONTROLs pins must be on the same port and not on a port with other input pins (limits).
#define CONTROL_DDR DDRC
#define CONTROL_PIN PINC
#define CONTROL_PORT PORTC
#define CONTROL_DDR NotUsed
#define CONTROL_PIN NotUsed
#define CONTROL_PORT NotUsed
#define CONTROL_RESET_BIT 0 // Uno Analog Pin 0
#define CONTROL_FEED_HOLD_BIT 1 // Uno Analog Pin 1
#define CONTROL_CYCLE_START_BIT 2 // Uno Analog Pin 2
#define CONTROL_SAFETY_DOOR_BIT 1 // Uno Analog Pin 1 NOTE: Safety door is shared with feed hold. Enabled by config define.
#define CONTROL_INT PCIE1 // Pin change interrupt enable pin
#define CONTROL_INT_vect PCINT1_vect
#define CONTROL_PCMSK PCMSK1 // Pin change interrupt register
#define CONTROL_PCMSK NotUsed // Pin change interrupt register
#define CONTROL_MASK ((1<<CONTROL_RESET_BIT)|(1<<CONTROL_FEED_HOLD_BIT)|(1<<CONTROL_CYCLE_START_BIT)|(1<<CONTROL_SAFETY_DOOR_BIT))
#define CONTROL_INVERT_MASK CONTROL_MASK // May be re-defined to only invert certain control pins.
// Define probe switch input pin.
#define PROBE_DDR DDRC
#define PROBE_PIN PINC
#define PROBE_PORT PORTC
#define PROBE_DDR NotUsed
#define PROBE_PIN NotUsed
#define PROBE_PORT NotUsed
#define PROBE_BIT 5 // Uno Analog Pin 5
#define PROBE_MASK (1<<PROBE_BIT)