ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

G-code updates for G10 L2 and L20

Browse Source 
- Updated g-codes G10 L2 and G10 L20 to the new descriptions on
linuxcnc.org
This commit is contained in:
Sonny Jeon
2013-03-19 11:35:19 -06:00
parent cdcb4263e8
commit 96f7d9b78e
1 changed files with 17 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

33
gcode.c
View File

@@ -282,28 +282,29 @@ uint8_t gc_execute_line(char *line)
break;
case NON_MODAL_SET_COORDINATE_DATA:
int_value = trunc(p); // Convert p value to int.
if ((l != 2 && l != 20) || (int_value < 1 || int_value > N_COORDINATE_SYSTEM)) { // L2 and L20. P1=G54, P2=G55, ...
if ((l != 2 && l != 20) || (int_value < 0 || int_value > N_COORDINATE_SYSTEM)) { // L2 and L20. P1=G54, P2=G55, ...
FAIL(STATUS_UNSUPPORTED_STATEMENT);
} else if (!axis_words && l==2) { // No axis words.
FAIL(STATUS_INVALID_STATEMENT);
} else {
int_value--; // Adjust P index to EEPROM coordinate data indexing.
if (l == 20) {
settings_write_coord_data(int_value,gc.position);
// Update system coordinate system if currently active.
if (gc.coord_select == int_value) { memcpy(gc.coord_system,gc.position,sizeof(gc.position)); }
} else {
float coord_data[N_AXIS];
if (!settings_read_coord_data(int_value,coord_data)) { return(STATUS_SETTING_READ_FAIL); }
// Update axes defined only in block. Always in machine coordinates. Can change non-active system.
uint8_t i;
for (i=0; i<N_AXIS; i++) { // Axes indices are consistent, so loop may be used.
if ( bit_istrue(axis_words,bit(i)) ) { coord_data[i] = target[i]; }
if (int_value > 0) { int_value--; } // Adjust P1-P6 index to EEPROM coordinate data indexing.
else { int_value = gc.coord_select; } // Index P0 as the active coordinate system
float coord_data[N_AXIS];
if (!settings_read_coord_data(int_value,coord_data)) { return(STATUS_SETTING_READ_FAIL); }
uint8_t i;
// Update axes defined only in block. Always in machine coordinates. Can change non-active system.
for (i=0; i<N_AXIS; i++) { // Axes indices are consistent, so loop may be used.
if (bit_istrue(axis_words,bit(i)) ) {
if (l == 20) {
coord_data[i] = gc.position[i]-target[i]; // L20: Update axis current position to target
} else {
coord_data[i] = target[i]; // L2: Update coordinate system axis
}
}
settings_write_coord_data(int_value,coord_data);
// Update system coordinate system if currently active.
if (gc.coord_select == int_value) { memcpy(gc.coord_system,coord_data,sizeof(coord_data)); }
}
settings_write_coord_data(int_value,coord_data);
// Update system coordinate system if currently active.
if (gc.coord_select == int_value) { memcpy(gc.coord_system,coord_data,sizeof(coord_data)); }
}
axis_words = 0; // Axis words used. Lock out from motion modes by clearing flags.
break;