Improved option for v0.9 GUI compatibility.
- Addressed an issue with backward compatibility with Grbl v0.9-style GUIs. - It still may not work due to new data and states coming back from Grbl v1.1. Regardless, DO NOT TRY TO USE THE COMPATIBILITY MODE UNTIL THERE IS A REALLY GOOD REASON TO. - v0.9 GUI compatibility mode will be removed in future versions. You’ve been warned. It’s highly recommended for GUIs to update to the new v1.1 interface. - Compability mode will only fit on an Arduino Uno due to size increases. - Removed the REPORT_GUI_MODE compile option since it’s part of the v1.1 interface standard. - Updated the documentation to better describe the compatibility mode build option.
This commit is contained in:
Sonny Jeon
parent
ed790c9fa2
commit
8b76a39d5d
@ -7,7 +7,7 @@
|
||||
"Z","Homing force origin","Enabled"
|
||||
"H","Homing single axis commands","Enabled"
|
||||
"L","Two limit switches on axis","Enabled"
|
||||
"R","Classic status reporting","Enabled"
|
||||
"R","Classic compatibility mode","Enabled"
|
||||
"*","Restore all EEPROM command","Disabled"
|
||||
"$","Restore EEPROM `$` settings command","Disabled"
|
||||
"#","Restore EEPROM parameter data command","Disabled"
|
||||
|
||||
|
@ -1,3 +1,73 @@
|
||||
----------------
|
||||
Date: 2016-10-17
|
||||
Author: Sonny Jeon
|
||||
Subject: v1.1d: Tweaked interface a bit. Added realtime spindle speed and build option data. Minor bug fixes.
|
||||
|
||||
- Increment to v1.1d due to interface tweaks.
|
||||
|
||||
- Based on GUI dev feedback, the toggle overrides report was removed
|
||||
and replace with showing “accessory state”. This shows a character if a
|
||||
particular accessory is enabled, like the spindle or flood coolant.
|
||||
These can be directly altered by the toggle overrides, so when they
|
||||
execute, a GUI will be able to observe the state altering as feedback.
|
||||
|
||||
- Altered the real-time feed rate to show real-time spindle speed as
|
||||
well. It was an over-sight on my part. It’s needed because it’s hard to
|
||||
know what the current spindle speed is when overrides are altering it.
|
||||
Especially during something like a laser cutting job when its important
|
||||
to know how spindle speed overrides are effecting things.
|
||||
|
||||
- Real-time spindle speed is not shown if VARIABLE_SPINDLE is disabled.
|
||||
The old real-time feed rate data field will show instead.
|
||||
|
||||
- Compile-time option data is now included in another message
|
||||
immediately following the build info version string, starting with
|
||||
`[OPT:`. A character code follows the data type name with each
|
||||
indicating a particular option enabled or disabled. This will help
|
||||
immensely with debugging Grbl as well as help GUIs know exactly how
|
||||
Grbl was compiled.
|
||||
|
||||
- These interface changes are detailed in the updated documentation.
|
||||
|
||||
- Reduced the default planner buffer size from 17 to 16. Needed to free
|
||||
up some memory…
|
||||
|
||||
- For increasing the serial TX buffer size from 90 to 104 bytes. The
|
||||
addition of real-time spindle speeds and accessory enable data required
|
||||
a bigger buffer. This is to ensure Grbl is performing at optimal levels.
|
||||
|
||||
- Refactored parts of the spindle and coolant control code to make it
|
||||
more consistent to each other and how it was called. It was a little
|
||||
messy. The changes made it easier to track what each function call was
|
||||
doing based on what was calling it.
|
||||
|
||||
- Created a couple of new get_state functions for the spindle and
|
||||
coolant. These are called by the accessory state report to look
|
||||
directly at the pin state, rather than track how it was set. This
|
||||
guarantees that the state is reported correctly.
|
||||
|
||||
- Updated the g-code parser, parking motion, sleep mode, and spindle
|
||||
stop calls to refactored spindle and coolant code.
|
||||
|
||||
- Added a compile-time option to enable homing individual axes, rather
|
||||
than having only the main homing cycle. The actual use case for this is
|
||||
pretty rare. It’s not recommended you enable this, unless you have a
|
||||
specific application for it. Otherwise, just alter the homing cycle
|
||||
itself.
|
||||
|
||||
- Refactored the printFloat() function to not show a decimal point if
|
||||
there are no trailing values after it. For example, `1.` now shows `1`.
|
||||
|
||||
- Fixed an issue regarding spindle speed overrides no being applied to
|
||||
blocks without motions.
|
||||
|
||||
- Removed the toggle_ovr_mask system variable and replaced with
|
||||
spindle_stop_ovr system variable. Coolant toggles don’t need to be
|
||||
tracked.
|
||||
|
||||
- Updated README
|
||||
|
||||
|
||||
----------------
|
||||
Date: 2016-10-17
|
||||
Author: Will Winder
|
||||
|
||||
@ -311,7 +311,7 @@ Feedback messages provide non-critical information on what Grbl is doing, what i
|
||||
| **`Z`** | Homing force origin enabled |
|
||||
| **`H`** | Homing single axis enabled |
|
||||
| **`L`** | Two limit switches on axis enabled |
|
||||
| **`R`** | Classic status reporting enabled |
|
||||
| **`R`** | Classic compatiblity mode enabled |
|
||||
| **`*`** | Restore all EEPROM disabled |
|
||||
| **`$`** | Restore EEPROM `$` settings disabled |
|
||||
| **`#`** | Restore EEPROM parameter data disabled |
|
||||
|
||||
@ -260,13 +260,7 @@
|
||||
// to their default values at program end.
|
||||
#define RESTORE_OVERRIDES_AFTER_PROGRAM_END // Default enabled. Comment to disable.
|
||||
|
||||
// Enables minimal reporting feedback mode for GUIs, where human-readable strings are not as important.
|
||||
// This saves nearly 2KB of flash space and may allow enough space to install other/future features.
|
||||
// GUIs will need to install a look-up table for the error-codes that Grbl sends back in their place.
|
||||
// NOTE: This feature is new and experimental. Make sure the GUI you are using supports this mode.
|
||||
#define REPORT_GUI_MODE // Default enabled. Comment to disable.
|
||||
|
||||
// The status report change for Grbl v1.0 and after also removed the ability to disable/enable most data
|
||||
// The status report change for Grbl v1.1 and after also removed the ability to disable/enable most data
|
||||
// fields from the report. This caused issues for GUI developers, who've had to manage several scenarios
|
||||
// and configurations. The increased efficiency of the new reporting style allows for all data fields to
|
||||
// be sent without potential performance issues.
|
||||
@ -293,13 +287,21 @@
|
||||
#define REPORT_WCO_REFRESH_BUSY_COUNT 30 // (1-255)
|
||||
#define REPORT_WCO_REFRESH_IDLE_COUNT 10 // (1-255) Must be less than or equal to the busy count
|
||||
|
||||
// COMPATIBILITY OPTIONS:
|
||||
// Grbl v1.0 and later altered the formatting of the realtime status reports to make it more consistent
|
||||
// for parsing with cleaner delimiters and optimized messages. To use Grbl v0.9-style status reporting,
|
||||
// enable this compile option. This is generally useful if older GUIs require this formatting.
|
||||
// #define USE_CLASSIC_REALTIME_REPORT
|
||||
// #define REPORT_ALL_PIN_STATES // Default disabled. Comment to enable. NOTE: Compatible with old-style reports only.
|
||||
// #define REPORT_REALTIME_RATE // Disabled by default. Uncomment to enable.
|
||||
// ----- COMPATIBILITY OPTIONS: ------
|
||||
// The following options enabled the old-style v0.9 Grbl interface.
|
||||
// WARNING: DO NOT USE these compatibility options unless there is a really good reason to. If you are
|
||||
// trying to use Grbl v1.1 with a GUI that supports a v0.9-style interface, it will still not likely work.
|
||||
// A few things have been added, like override and accessory data and a new sleep state. These things will
|
||||
// still likely require the GUI to be updated to handle these. In other words, IT WILL STILL NOT WORK!
|
||||
// IT'S HIGHLY RECOMMENDED FOR GUIs TO UPDATE TO THE NEW INTERFACE FOR v1.1. Don't try to make it
|
||||
// compatible with this old v0.9 style. It will be dropped in the near future. You have been warned.
|
||||
// NOTE: The compiled size of Grbl with these options enabled will exceed the flash limit of FTDI-based
|
||||
// Arduinos, like the Duemilanove and Nano. This will only fit on an Uno with the Optiboot bootloader.
|
||||
// #define USE_CLASSIC_GRBL_INTERFACE // Default disabled. Uncomment to enable.
|
||||
// #define REPORT_ALL_PIN_STATES // Default disabled. Uncomment to enable. Option obsolete in v1.1.
|
||||
// #define REPORT_REALTIME_RATE // Disabled by default. Uncomment to enable. Option obsolete in v1.1.
|
||||
// Enables minimal reporting feedback mode for GUIs, where human-readable strings are not as important.
|
||||
// -----------------------------------
|
||||
|
||||
// The temporal resolution of the acceleration management subsystem. A higher number gives smoother
|
||||
// acceleration, particularly noticeable on machines that run at very high feedrates, but may negatively
|
||||
|
||||
@ -23,7 +23,7 @@
|
||||
|
||||
// Grbl versioning system
|
||||
#define GRBL_VERSION "1.1d"
|
||||
#define GRBL_VERSION_BUILD "20161017"
|
||||
#define GRBL_VERSION_BUILD "20161018"
|
||||
|
||||
// Define standard libraries used by Grbl.
|
||||
#include <avr/io.h>
|
||||
|
||||
265
grbl/report.c
265
grbl/report.c
@ -42,53 +42,56 @@ static void report_util_axis_values(float *axis_value) {
|
||||
}
|
||||
}
|
||||
|
||||
// static void report_util_setting_string(uint8_t n) {
|
||||
// serial_write(' ');
|
||||
// serial_write('(');
|
||||
// switch(n) {
|
||||
// case 0: printPgmString(PSTR("stp pulse:us")); break;
|
||||
// case 1: printPgmString(PSTR("idl delay:ms")); break;
|
||||
// case 2: printPgmString(PSTR("stp inv:msk")); break;
|
||||
// case 3: printPgmString(PSTR("dir inv:msk")); break;
|
||||
// case 4: printPgmString(PSTR("stp enbl inv")); break;
|
||||
// case 5: printPgmString(PSTR("lim inv")); break;
|
||||
// case 6: printPgmString(PSTR("prb inv")); break;
|
||||
// case 10: printPgmString(PSTR("rpt:msk")); break;
|
||||
// case 11: printPgmString(PSTR("jnc dev:mm")); break;
|
||||
// case 12: printPgmString(PSTR("arc tol:mm")); break;
|
||||
// case 13: printPgmString(PSTR("rpt inch")); break;
|
||||
// case 20: printPgmString(PSTR("sft lim")); break;
|
||||
// case 21: printPgmString(PSTR("hrd lim")); break;
|
||||
// case 22: printPgmString(PSTR("hm cyc")); break;
|
||||
// case 23: printPgmString(PSTR("hm dir inv:msk")); break;
|
||||
// case 24: printPgmString(PSTR("hm feed:mm/min")); break;
|
||||
// case 25: printPgmString(PSTR("hm seek:mm/min")); break;
|
||||
// case 26: printPgmString(PSTR("hm delay:ms")); break;
|
||||
// case 27: printPgmString(PSTR("hm off:mm")); break;
|
||||
// case 30: printPgmString(PSTR("rpm max")); break;
|
||||
// case 31: printPgmString(PSTR("rpm min")); break;
|
||||
// case 32: printPgmString(PSTR("laser")); break;
|
||||
// default:
|
||||
// n -= AXIS_SETTINGS_START_VAL;
|
||||
// uint8_t idx = 0;
|
||||
// while (n < 10) {
|
||||
// if (n<10) {
|
||||
// print_uint8_base10(n+idx);
|
||||
// switch (idx) {
|
||||
// case 0: printPgmString(PSTR(":stp/mm")); break;
|
||||
// case 1: printPgmString(PSTR(":mm/min")); break;
|
||||
// case 2: printPgmString(PSTR(":mm/s^2")); break;
|
||||
// case 3: printPgmString(PSTR(":mm max")); break;
|
||||
// }
|
||||
// } else {
|
||||
// n -= 10;
|
||||
// idx++;
|
||||
// }
|
||||
// }
|
||||
// }
|
||||
// report_util_comment_line_feed();
|
||||
// }
|
||||
/*
|
||||
static void report_util_setting_string(uint8_t n) {
|
||||
serial_write(' ');
|
||||
serial_write('(');
|
||||
switch(n) {
|
||||
case 0: printPgmString(PSTR("stp pulse:us")); break;
|
||||
case 1: printPgmString(PSTR("idl delay:ms")); break;
|
||||
case 2: printPgmString(PSTR("stp inv:msk")); break;
|
||||
case 3: printPgmString(PSTR("dir inv:msk")); break;
|
||||
case 4: printPgmString(PSTR("stp enbl inv")); break;
|
||||
case 5: printPgmString(PSTR("lim inv")); break;
|
||||
case 6: printPgmString(PSTR("prb inv")); break;
|
||||
case 10: printPgmString(PSTR("rpt:msk")); break;
|
||||
case 11: printPgmString(PSTR("jnc dev:mm")); break;
|
||||
case 12: printPgmString(PSTR("arc tol:mm")); break;
|
||||
case 13: printPgmString(PSTR("rpt inch")); break;
|
||||
case 20: printPgmString(PSTR("sft lim")); break;
|
||||
case 21: printPgmString(PSTR("hrd lim")); break;
|
||||
case 22: printPgmString(PSTR("hm cyc")); break;
|
||||
case 23: printPgmString(PSTR("hm dir inv:msk")); break;
|
||||
case 24: printPgmString(PSTR("hm feed:mm/min")); break;
|
||||
case 25: printPgmString(PSTR("hm seek:mm/min")); break;
|
||||
case 26: printPgmString(PSTR("hm delay:ms")); break;
|
||||
case 27: printPgmString(PSTR("hm off:mm")); break;
|
||||
case 30: printPgmString(PSTR("rpm max")); break;
|
||||
case 31: printPgmString(PSTR("rpm min")); break;
|
||||
case 32: printPgmString(PSTR("laser")); break;
|
||||
default:
|
||||
n -= AXIS_SETTINGS_START_VAL;
|
||||
uint8_t idx = 0;
|
||||
while (n < 10) {
|
||||
if (n<10) {
|
||||
print_uint8_base10(n+idx);
|
||||
switch (idx) {
|
||||
case 0: printPgmString(PSTR(":stp/mm")); break;
|
||||
case 1: printPgmString(PSTR(":mm/min")); break;
|
||||
case 2: printPgmString(PSTR(":mm/s^2")); break;
|
||||
case 3: printPgmString(PSTR(":mm max")); break;
|
||||
}
|
||||
} else {
|
||||
n -= 10;
|
||||
idx++;
|
||||
}
|
||||
}
|
||||
}
|
||||
report_util_comment_line_feed();
|
||||
}
|
||||
*/
|
||||
|
||||
#ifndef USE_CLASSIC_GRBL_INTERFACE
|
||||
static void report_util_uint8_setting(uint8_t n, int val) {
|
||||
report_util_setting_prefix(n);
|
||||
print_uint8_base10(val);
|
||||
@ -101,6 +104,7 @@ static void report_util_float_setting(uint8_t n, float val, uint8_t n_decimal) {
|
||||
report_util_line_feed();
|
||||
// report_util_setting_string(n);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
// Handles the primary confirmation protocol response for streaming interfaces and human-feedback.
|
||||
@ -116,10 +120,7 @@ void report_status_message(uint8_t status_code)
|
||||
case STATUS_OK: // STATUS_OK
|
||||
printPgmString(PSTR("ok\r\n")); break;
|
||||
default:
|
||||
#ifdef REPORT_GUI_MODE
|
||||
printPgmString(PSTR("error:"));
|
||||
print_uint8_base10(status_code);
|
||||
#else
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("error: "));
|
||||
switch(status_code) {
|
||||
case STATUS_EXPECTED_COMMAND_LETTER:
|
||||
@ -168,6 +169,9 @@ void report_status_message(uint8_t status_code)
|
||||
printPgmString(PSTR("Invalid gcode ID:"));
|
||||
print_uint8_base10(status_code); // Print error code for user reference
|
||||
}
|
||||
#else
|
||||
printPgmString(PSTR("error:"));
|
||||
print_uint8_base10(status_code);
|
||||
#endif
|
||||
report_util_line_feed();
|
||||
}
|
||||
@ -176,10 +180,7 @@ void report_status_message(uint8_t status_code)
|
||||
// Prints alarm messages.
|
||||
void report_alarm_message(int8_t alarm_code)
|
||||
{
|
||||
#ifdef REPORT_GUI_MODE
|
||||
printPgmString(PSTR("ALARM:"));
|
||||
print_uint8_base10(alarm_code);
|
||||
#else
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("ALARM: "));
|
||||
switch (alarm_code) {
|
||||
case ALARM_HARD_LIMIT_ERROR:
|
||||
@ -197,6 +198,9 @@ void report_alarm_message(int8_t alarm_code)
|
||||
case ALARM_HOMING_FAIL_APPROACH:
|
||||
printPgmString(PSTR("Homing fail")); break;
|
||||
}
|
||||
#else
|
||||
printPgmString(PSTR("ALARM:"));
|
||||
print_uint8_base10(alarm_code);
|
||||
#endif
|
||||
report_util_line_feed();
|
||||
delay_ms(500); // Force delay to ensure message clears serial write buffer.
|
||||
@ -209,7 +213,11 @@ void report_alarm_message(int8_t alarm_code)
|
||||
// is installed, the message number codes are less than zero.
|
||||
void report_feedback_message(uint8_t message_code)
|
||||
{
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
serial_write('[');
|
||||
#else
|
||||
printPgmString(PSTR("[MSG:"));
|
||||
#endif
|
||||
switch(message_code) {
|
||||
case MESSAGE_CRITICAL_EVENT:
|
||||
printPgmString(PSTR("Reset to continue")); break;
|
||||
@ -246,9 +254,7 @@ void report_init_message()
|
||||
|
||||
// Grbl help message
|
||||
void report_grbl_help() {
|
||||
#ifdef REPORT_GUI_MODE
|
||||
printPgmString(PSTR("[HLP:$$ $# $G $I $N $x=val $Nx=line $J=line $SLP $C $X $H ~ ! ? ctrl-x]\r\n"));
|
||||
#else
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("$$ (view Grbl settings)\r\n"
|
||||
"$# (view # parameters)\r\n"
|
||||
"$G (view parser state)\r\n"
|
||||
@ -265,6 +271,8 @@ void report_grbl_help() {
|
||||
"! (feed hold)\r\n"
|
||||
"? (current status)\r\n"
|
||||
"ctrl-x (reset Grbl)\r\n"));
|
||||
#else
|
||||
printPgmString(PSTR("[HLP:$$ $# $G $I $N $x=val $Nx=line $J=line $SLP $C $X $H ~ ! ? ctrl-x]\r\n"));
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -273,8 +281,66 @@ void report_grbl_help() {
|
||||
// NOTE: The numbering scheme here must correlate to storing in settings.c
|
||||
void report_grbl_settings() {
|
||||
// Print Grbl settings.
|
||||
#ifdef REPORT_GUI_MODE
|
||||
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("$0=")); print_uint8_base10(settings.pulse_microseconds);
|
||||
printPgmString(PSTR(" (step pulse, usec)\r\n$1=")); print_uint8_base10(settings.stepper_idle_lock_time);
|
||||
printPgmString(PSTR(" (step idle delay, msec)\r\n$2=")); print_uint8_base10(settings.step_invert_mask);
|
||||
printPgmString(PSTR(" (step port invert mask)\r\n$3=")); print_uint8_base10(settings.dir_invert_mask);
|
||||
printPgmString(PSTR(" (dir port invert mask)\r\n$4=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_ST_ENABLE));
|
||||
printPgmString(PSTR(" (step enable invert, bool)\r\n$5=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_LIMIT_PINS));
|
||||
printPgmString(PSTR(" (limit pins invert, bool)\r\n$6=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_PROBE_PIN));
|
||||
printPgmString(PSTR(" (probe pin invert, bool)\r\n$10=")); print_uint8_base10(settings.status_report_mask);
|
||||
printPgmString(PSTR(" (status report mask)\r\n$11=")); printFloat(settings.junction_deviation,N_DECIMAL_SETTINGVALUE);
|
||||
printPgmString(PSTR(" (junction deviation, mm)\r\n$12=")); printFloat(settings.arc_tolerance,N_DECIMAL_SETTINGVALUE);
|
||||
printPgmString(PSTR(" (arc tolerance, mm)\r\n$13=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_REPORT_INCHES));
|
||||
printPgmString(PSTR(" (report inches, bool)\r\n$20=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_SOFT_LIMIT_ENABLE));
|
||||
printPgmString(PSTR(" (soft limits, bool)\r\n$21=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_HARD_LIMIT_ENABLE));
|
||||
printPgmString(PSTR(" (hard limits, bool)\r\n$22=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE));
|
||||
printPgmString(PSTR(" (homing cycle, bool)\r\n$23=")); print_uint8_base10(settings.homing_dir_mask);
|
||||
printPgmString(PSTR(" (homing dir invert mask\r\n$24=")); printFloat(settings.homing_feed_rate,N_DECIMAL_SETTINGVALUE);
|
||||
printPgmString(PSTR(" (homing feed, mm/min)\r\n$25=")); printFloat(settings.homing_seek_rate,N_DECIMAL_SETTINGVALUE);
|
||||
printPgmString(PSTR(" (homing seek, mm/min)\r\n$26=")); print_uint8_base10(settings.homing_debounce_delay);
|
||||
printPgmString(PSTR(" (homing debounce, msec)\r\n$27=")); printFloat(settings.homing_pulloff,N_DECIMAL_SETTINGVALUE);
|
||||
printPgmString(PSTR(" (homing pull-off, mm)\r\n$30=")); printFloat(settings.rpm_max,N_DECIMAL_RPMVALUE);
|
||||
printPgmString(PSTR(" (rpm max)\r\n$31=")); printFloat(settings.rpm_min,N_DECIMAL_RPMVALUE);
|
||||
#ifdef VARIABLE_SPINDLE
|
||||
printPgmString(PSTR(" (rpm min)\r\n$32=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_LASER_MODE));
|
||||
printPgmString(PSTR(" (laser mode, bool)\r\n"));
|
||||
#else
|
||||
printPgmString(PSTR(" (rpm min)\r\n$32=0 (laser mode, bool)\r\n"));
|
||||
#endif
|
||||
// Print axis settings
|
||||
uint8_t idx, set_idx;
|
||||
uint8_t val = AXIS_SETTINGS_START_VAL;
|
||||
for (set_idx=0; set_idx<AXIS_N_SETTINGS; set_idx++) {
|
||||
for (idx=0; idx<N_AXIS; idx++) {
|
||||
serial_write('$');
|
||||
print_uint8_base10(val+idx);
|
||||
serial_write('=');
|
||||
switch (set_idx) {
|
||||
case 0: printFloat(settings.steps_per_mm[idx],N_DECIMAL_SETTINGVALUE); break;
|
||||
case 1: printFloat(settings.max_rate[idx],N_DECIMAL_SETTINGVALUE); break;
|
||||
case 2: printFloat(settings.acceleration[idx]/(60*60),N_DECIMAL_SETTINGVALUE); break;
|
||||
case 3: printFloat(-settings.max_travel[idx],N_DECIMAL_SETTINGVALUE); break;
|
||||
}
|
||||
serial_write(' ');
|
||||
serial_write('(');
|
||||
switch (idx) {
|
||||
case X_AXIS: printPgmString(PSTR("x")); break;
|
||||
case Y_AXIS: printPgmString(PSTR("y")); break;
|
||||
case Z_AXIS: printPgmString(PSTR("z")); break;
|
||||
}
|
||||
switch (set_idx) {
|
||||
case 0: printPgmString(PSTR(", step/mm")); break;
|
||||
case 1: printPgmString(PSTR(" max rate, mm/min")); break;
|
||||
case 2: printPgmString(PSTR(" accel, mm/sec^2")); break;
|
||||
case 3: printPgmString(PSTR(" max travel, mm")); break;
|
||||
}
|
||||
printPgmString(PSTR(")\r\n"));
|
||||
}
|
||||
val += AXIS_SETTINGS_INCREMENT;
|
||||
}
|
||||
#else
|
||||
report_util_uint8_setting(0,settings.pulse_microseconds);
|
||||
report_util_uint8_setting(1,settings.stepper_idle_lock_time);
|
||||
report_util_uint8_setting(2,settings.step_invert_mask);
|
||||
@ -315,68 +381,6 @@ void report_grbl_settings() {
|
||||
}
|
||||
val += AXIS_SETTINGS_INCREMENT;
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
printPgmString(PSTR("$0=")); print_uint8_base10(settings.pulse_microseconds);
|
||||
printPgmString(PSTR(" (step pulse, usec)\r\n$1=")); print_uint8_base10(settings.stepper_idle_lock_time);
|
||||
printPgmString(PSTR(" (step idle delay, msec)\r\n$2=")); print_uint8_base10(settings.step_invert_mask);
|
||||
printPgmString(PSTR(" (step port invert mask)\r\n$3=")); print_uint8_base10(settings.dir_invert_mask);
|
||||
printPgmString(PSTR(" (dir port invert mask)\r\n$4=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_ST_ENABLE));
|
||||
printPgmString(PSTR(" (step enable invert, bool)\r\n$5=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_LIMIT_PINS));
|
||||
printPgmString(PSTR(" (limit pins invert, bool)\r\n$6=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_INVERT_PROBE_PIN));
|
||||
printPgmString(PSTR(" (probe pin invert, bool)\r\n$10=")); print_uint8_base10(settings.status_report_mask);
|
||||
printPgmString(PSTR(" (status report mask)\r\n$11=")); printFloat_SettingValue(settings.junction_deviation);
|
||||
printPgmString(PSTR(" (junction deviation, mm)\r\n$12=")); printFloat_SettingValue(settings.arc_tolerance);
|
||||
printPgmString(PSTR(" (arc tolerance, mm)\r\n$13=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_REPORT_INCHES));
|
||||
printPgmString(PSTR(" (report inches, bool)\r\n$20=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_SOFT_LIMIT_ENABLE));
|
||||
printPgmString(PSTR(" (soft limits, bool)\r\n$21=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_HARD_LIMIT_ENABLE));
|
||||
printPgmString(PSTR(" (hard limits, bool)\r\n$22=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE));
|
||||
printPgmString(PSTR(" (homing cycle, bool)\r\n$23=")); print_uint8_base10(settings.homing_dir_mask);
|
||||
printPgmString(PSTR(" (homing dir invert mask\r\n$24=")); printFloat_SettingValue(settings.homing_feed_rate);
|
||||
printPgmString(PSTR(" (homing feed, mm/min)\r\n$25=")); printFloat_SettingValue(settings.homing_seek_rate);
|
||||
printPgmString(PSTR(" (homing seek, mm/min)\r\n$26=")); print_uint8_base10(settings.homing_debounce_delay);
|
||||
printPgmString(PSTR(" (homing debounce, msec)\r\n$27=")); printFloat_SettingValue(settings.homing_pulloff);
|
||||
printPgmString(PSTR(" (homing pull-off, mm)\r\n$30=")); printFloat_RPMValue(settings.rpm_max);
|
||||
printPgmString(PSTR(" (rpm max)\r\n$31=")); printFloat_RPMValue(settings.rpm_min);
|
||||
#ifdef VARIABLE_SPINDLE
|
||||
printPgmString(PSTR(" (rpm min)\r\n$32=")); print_uint8_base10(bit_istrue(settings.flags,BITFLAG_LASER_MODE));
|
||||
printPgmString(PSTR(" (laser mode, bool)\r\n"));
|
||||
#else
|
||||
printPgmString(PSTR(" (rpm min)\r\n$32=0 (laser mode, bool)\r\n"));
|
||||
#endif
|
||||
// Print axis settings
|
||||
uint8_t idx, set_idx;
|
||||
uint8_t val = AXIS_SETTINGS_START_VAL;
|
||||
for (set_idx=0; set_idx<AXIS_N_SETTINGS; set_idx++) {
|
||||
for (idx=0; idx<N_AXIS; idx++) {
|
||||
serial_write('$');
|
||||
print_uint8_base10(val+idx);
|
||||
serial_write('=');
|
||||
switch (set_idx) {
|
||||
case 0: printFloat_SettingValue(settings.steps_per_mm[idx]); break;
|
||||
case 1: printFloat_SettingValue(settings.max_rate[idx]); break;
|
||||
case 2: printFloat_SettingValue(settings.acceleration[idx]/(60*60)); break;
|
||||
case 3: printFloat_SettingValue(-settings.max_travel[idx]); break;
|
||||
}
|
||||
serial_write(' ');
|
||||
serial_write('(');
|
||||
switch (idx) {
|
||||
case X_AXIS: printPgmString(PSTR("x")); break;
|
||||
case Y_AXIS: printPgmString(PSTR("y")); break;
|
||||
case Z_AXIS: printPgmString(PSTR("z")); break;
|
||||
}
|
||||
switch (set_idx) {
|
||||
case 0: printPgmString(PSTR(", step/mm")); break;
|
||||
case 1: printPgmString(PSTR(" max rate, mm/min")); break;
|
||||
case 2: printPgmString(PSTR(" accel, mm/sec^2")); break;
|
||||
case 3: printPgmString(PSTR(" max travel, mm")); break;
|
||||
}
|
||||
printPgmString(PSTR(")\r\n"));
|
||||
}
|
||||
val += AXIS_SETTINGS_INCREMENT;
|
||||
}
|
||||
|
||||
#endif
|
||||
}
|
||||
|
||||
@ -430,7 +434,11 @@ void report_ngc_parameters()
|
||||
// Print current gcode parser mode state
|
||||
void report_gcode_modes()
|
||||
{
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("[G"));
|
||||
#else
|
||||
printPgmString(PSTR("[GC:G"));
|
||||
#endif
|
||||
switch (gc_state.modal.motion) {
|
||||
case MOTION_MODE_SEEK : serial_write('0'); break;
|
||||
case MOTION_MODE_LINEAR : serial_write('1'); break;
|
||||
@ -515,15 +523,24 @@ void report_startup_line(uint8_t n, char *line)
|
||||
|
||||
void report_execute_startup_message(char *line, uint8_t status_code)
|
||||
{
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printString(line);
|
||||
report_status_message(status_code);
|
||||
#else
|
||||
serial_write('>');
|
||||
printString(line);
|
||||
serial_write(':');
|
||||
report_status_message(status_code);
|
||||
#endif
|
||||
}
|
||||
|
||||
// Prints build info line
|
||||
void report_build_info(char *line)
|
||||
{
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
printPgmString(PSTR("[" GRBL_VERSION "." GRBL_VERSION_BUILD ":"));
|
||||
printString(line);
|
||||
#else
|
||||
printPgmString(PSTR("[VER:" GRBL_VERSION "." GRBL_VERSION_BUILD ":"));
|
||||
printString(line);
|
||||
report_util_feedback_line_feed();
|
||||
@ -552,7 +569,7 @@ void report_build_info(char *line)
|
||||
#ifdef LIMITS_TWO_SWITCHES_ON_AXES
|
||||
serial_write('L');
|
||||
#endif
|
||||
#ifdef USE_CLASSIC_REALTIME_REPORT
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
serial_write('R');
|
||||
#endif
|
||||
#ifndef ENABLE_RESTORE_EEPROM_WIPE_ALL // NOTE: Shown when disabled.
|
||||
@ -573,9 +590,9 @@ void report_build_info(char *line)
|
||||
#ifndef FORCE_BUFFER_SYNC_DURING_WCO_CHANGE // NOTE: Shown when disabled.
|
||||
serial_write('W');
|
||||
#endif
|
||||
|
||||
// NOTE: Compiled values, like override increments/max/min values, may be added at some point later.
|
||||
// These will likely have a comma delimiter to separate them.
|
||||
#endif
|
||||
|
||||
report_util_feedback_line_feed();
|
||||
}
|
||||
@ -597,7 +614,7 @@ void report_echo_line_received(char *line)
|
||||
// especially during g-code programs with fast, short line segments and high frequency reports (5-20Hz).
|
||||
void report_realtime_status()
|
||||
{
|
||||
#ifdef USE_CLASSIC_REALTIME_REPORT
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
|
||||
uint8_t idx;
|
||||
int32_t current_position[N_AXIS]; // Copy current state of the system position variable
|
||||
|
||||
@ -40,7 +40,7 @@
|
||||
#define BITFLAG_INVERT_PROBE_PIN bit(7)
|
||||
|
||||
// Define status reporting boolean enable bit flags in settings.status_report_mask
|
||||
#ifdef USE_CLASSIC_REALTIME_REPORT
|
||||
#ifdef USE_CLASSIC_GRBL_INTERFACE
|
||||
#define BITFLAG_RT_STATUS_MACHINE_POSITION bit(0)
|
||||
#define BITFLAG_RT_STATUS_WORK_POSITION bit(1)
|
||||
#define BITFLAG_RT_STATUS_PLANNER_BUFFER bit(2)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user