ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

small fixes after testing on real hardware. Still no chaining of motions and something odd with arcs

Browse Source
This commit is contained in:
Simen Svale Skogsrud 2011-02-03 10:42:00 +01:00
parent 420641d13d
commit 4b63cf3ab5
4 changed files with 14 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
config.h
View File

@ -133,6 +133,6 @@ void store_setting(int parameter, double value);
#define DEFAULT_STEPPING_INVERT_MASK 0
// The temporal resolution of the acceleration management subsystem
#define ACCELERATION_TICKS_PER_SECOND 10L
#define ACCELERATION_TICKS_PER_SECOND 20L
#endif

11
motion_control.c
View File

@ -30,11 +30,13 @@
#include "wiring_serial.h"
// The current position of the tool in absolute steps
int32_t position[3];
int32_t position[3];
int8_t acceleration_management_enabled;
void mc_init()
{
clear_vector(position);
acceleration_management_enabled = TRUE;
}
void mc_dwell(uint32_t milliseconds)
@ -49,6 +51,7 @@ void mc_set_acceleration_manager_enabled(uint8_t enabled) {
} else {
plan_disable_acceleration_management();
}
acceleration_management_enabled = enabled;
}
// Execute linear motion in absolute millimeter coordinates. Feed rate given in millimeters/second
@ -92,7 +95,8 @@ void mc_line(double x, double y, double z, double feed_rate, int invert_feed_rat
// segment is configured in settings.mm_per_arc_segment.
void mc_arc(double theta, double angular_travel, double radius, double linear_travel, int axis_1, int axis_2,
int axis_linear, double feed_rate, int invert_feed_rate)
{
{
//plan_disable_acceleration_management(); // disable acceleration management for the duration of the arc
double millimeters_of_travel = hypot(angular_travel*radius, labs(linear_travel));
if (millimeters_of_travel == 0.0) { return; }
uint16_t segments = ceil(millimeters_of_travel/settings.mm_per_arc_segment);
@ -118,7 +122,8 @@ void mc_arc(double theta, double angular_travel, double radius, double linear_tr
target[axis_1] = center_x+sin(theta)*radius;
target[axis_2] = center_y+cos(theta)*radius;
mc_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], feed_rate, invert_feed_rate);
}
}
//mc_set_acceleration_manager_enabled(acceleration_management_enabled); // restore acceleration management setting
}
void mc_go_home()

2
script/console
View File

@ -1,4 +1,4 @@
socat -d -d READLINE /dev/tty.usbmodem24121,nonblock=1,clocal=1
socat -d -d READLINE /dev/tty.usbserial-A700e0GO,clocal=1,nonblock=1,cread=1,cs8,ixon=1,ixoff=1
socat -d -d READLINE /dev/tty.usbserial-A9007QcR,clocal=1,nonblock=1,cread=1,cs8,ixon=1,ixoff=1
#socat -d -d READLINE /dev/tty.FireFly-A964-SPP-1,clocal=1,nonblock=1,cread=1,cs8,ixon=1,ixoff=1

5
stepper_plan.c
View File

@ -326,6 +326,8 @@ void plan_buffer_line(int32_t steps_x, int32_t steps_y, int32_t steps_z, uint32_
block->speed_z = block->steps_z*multiplier/settings.steps_per_mm[2];
block->nominal_speed = millimeters*multiplier;
block->nominal_rate = ceil(block->step_event_count*multiplier);
block->millimeters = millimeters;
block->entry_factor = 0.0;
// Compute the acceleration rate for the trapezoid generator. Depending on the slope of the line
// average travel per step event changes. For a line along one axis the travel per step event
@ -340,8 +342,9 @@ void plan_buffer_line(int32_t steps_x, int32_t steps_y, int32_t steps_z, uint32_
if (acceleration_management) {
calculate_trapezoid_for_block(block,0,0); // compute a conservative acceleration trapezoid for now
} else {
block->initial_rate = block->nominal_rate;
block->accelerate_until = 0;
block->decelerate_after = 0;
block->decelerate_after = block->step_event_count;
block->rate_delta = 0;
}