ManuelW/grbl-LPC-CoreXY
1
0
Fork 0
Code Issues Pull Requests Releases 1 Wiki Activity

Version bump to v0.9j

Browse Source 
- Version bump requested by OEMs to easily determine whether the
firmware supports the new EEPROM reset feature. Other than that, no
significant changes.
This commit is contained in:
Sonny Jeon
2015-07-17 08:19:57 -06:00
parent cc38ae2471
commit 0427fd5b9f
4 changed files with 31 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
grbl/config.h
View File

@@ -256,6 +256,9 @@
// the spindle direction pin(D13) as a separate spindle enable pin along with spindle speed PWM on pin D11.
// NOTE: This configure option only works with VARIABLE_SPINDLE enabled and a 328p processor (Uno).
// NOTE: With no direction pin, the spindle clockwise M4 g-code command will be removed. M3 and M5 still work.
// NOTE: BEWARE! The Arduino bootloader toggles the D13 pin when it powers up. If you flash Grbl with
// a programmer (you can use a spare Arduino as "Arduino as ISP". Search the web on how to wire this.),
// this D13 LED toggling should go away. We haven't tested this though. Please report how it goes!
// #define USE_SPINDLE_DIR_AS_ENABLE_PIN // Default disabled. Uncomment to enable.
// With this enabled, Grbl sends back an echo of the line it has received, which has been pre-parsed (spaces

4
grbl/grbl.h
View File

@@ -22,8 +22,8 @@
#define grbl_h
// Grbl versioning system
#define GRBL_VERSION "0.9i"
#define GRBL_VERSION_BUILD "20150620"
#define GRBL_VERSION "0.9j"
#define GRBL_VERSION_BUILD "20150717"
// Define standard libraries used by Grbl.
#include <avr/io.h>