28edc70855
Add option to remember last fan speed
...
Add the option to remember the last speed value and set the slider on load/refresh
2018-12-07 03:29:09 +10:00
5dc813fb7b
add init min and max pwm
2018-11-17 11:41:55 +10:00
2a779c9489
bump version to 0.1.8
2018-04-25 14:36:24 +10:00
b5693e2e34
fix regex not matching properly for low digit count values of S
...
see issue #9
2018-04-25 14:35:06 +10:00
55b2a05531
merge 0.1.7
...
update version
2017-12-02 08:03:18 +10:00
750f49e173
Merge branch 'master' into devel
2017-12-02 08:01:16 +10:00
8e547c6def
add repo info
2017-12-02 07:01:47 +10:00
bba91bba88
remove dev thing from version
2017-11-18 08:24:16 +10:00
1c6e0d442e
changes to the settings page
...
added helpful popup hints and removed the somewhat obvious line of text about limiting the fans output.
2017-11-18 08:00:16 +10:00
22ce5c7ec7
increase the div width in settings to 90%
2017-11-18 07:55:30 +10:00
ab2fa40b32
remove unnecessary css
...
plugin should now rely on touchUI's own css so removed my dodgy fix
2017-11-18 07:22:26 +10:00
47a3537490
move input box under touchUI + fix non functional button
...
move the input box over underneath the feedrate / flowrate to keep them all in the same spot and fix the stupid button not working in firefox (NFI why it didn't work, the code is literally the same it's just in a new spot. GG)
2017-11-18 07:21:29 +10:00
98d35249b0
new dev version
2017-11-18 06:55:07 +10:00
83249281cf
update version
2017-11-18 06:39:33 +10:00
8f710befbe
Merge pull request #5 from ntoff/devel
...
Devel -> master
2017-11-18 06:38:59 +10:00
d2f1ed57ad
add settings cleanup function
...
Clean up and remove empty config if everything is set to default values
2017-11-18 06:31:22 +10:00
f13fda67e2
modify settings saving to save integers
2017-11-18 05:59:54 +10:00
59ef6652eb
remove use strict
...
testing's over, remove "use strict"
2017-11-18 05:02:44 +10:00
c7c2f52149
add some comments
...
clarify fan speeds are 0-100% not 0-255 pwm values
2017-11-18 05:01:52 +10:00
943fca8581
control -> settings + tweak info timeout
...
for some reason I was saving settings in the control viewmodel, changed to the settings viewmodel and increased the default time the notices are visible by 1 second
2017-11-18 04:36:40 +10:00
b359461d80
fix issue with touch ui max slider value being wrong and fix padding
...
if touchui was active the max value was 255, also added a bit of extra width so the button doesn't resize (at least when the button text is in english)
2017-11-18 04:18:37 +10:00
addd0ffa4b
check for notifications and don't display if one is active
...
check for high / low speed out of range popups and only display one, block popping up of multiple notifications for the same event
2017-11-12 16:26:38 +10:00
70d3e0803b
separate stuff into their own functions
...
move percent to pwm function and checking the slider value is within range into their own functions
2017-11-12 06:33:51 +10:00
9ff32751f8
dev version
2017-11-12 05:53:52 +10:00
3049d0fedf
fix default fan speed slider position
...
oops, forgot the last bit of the if else statement
2017-11-12 05:19:12 +10:00
21e4627da2
missing span on touchui button + less global
...
hopefully nothing global "use strict" seems to not complain :D
2017-11-12 04:46:00 +10:00
a47ead4db3
tweak settings loader
...
parseint to make sure we're loading numbers and tweak the slider to adapt to the min/max value on UI load if the default value is outside the allowed range
2017-11-12 03:38:25 +10:00
f7faf42a87
remove unnecessary added classes
...
get rid of the extra classes added to make finding the buttons easier, turns out they aren't needed
2017-11-12 02:20:17 +10:00
2d7f2f443a
update readme with new autohide setting
2017-11-12 01:20:17 +10:00
deb15025d8
min/max requirement notification text fix
...
speed decrease notification used "meet minimum requirement" which might be misleading, changed to "meet maximum requirement"
2017-11-12 01:11:36 +10:00
175722a015
fix javascript console logging of fan speed notification
...
log was being output after the slider was set causing it to display the wrong value
2017-11-12 01:08:27 +10:00
f4bb25718a
add some notifications about fan speed being altered
...
Added a popup notification (can be disabled) and some console log text if the fan speed is altered. Also made the slider snap to the min/max value if it is out of range to give visual feedback that the plugin is doing something to the fan speed.
2017-11-12 01:02:29 +10:00
7bdd260617
use other view model push method
...
http://docs.octoprint.org/en/master/plugins/viewmodels.html#registering-custom-viewmodels says the other way is depreciated
2017-11-11 21:41:07 +10:00
0e71971e66
add percentage to logger message
...
add a more "human readable" percentage value to the logged fan speed (if modified)
2017-11-11 21:31:05 +10:00
99364df94e
wrap it in a try catch
...
Hopefully when something in my plugin breaks (that's when, not if) it won't take down all of octoprint's UI.
2017-11-06 17:23:25 +10:00
56f73ad6ab
increment version to 0.1.5
2017-10-12 00:59:42 +10:00
9fe9e04016
fix button while printing (touchUI)
...
missed that one :(
2017-10-11 23:18:34 +10:00
0772aaae3a
new version again
...
so I guess github doesn't support a b c releases?
2017-09-25 06:48:54 +10:00
112852d619
new version
2017-09-25 06:42:48 +10:00
0462a7552e
fix buttons disabled during printing
...
closes #3
2017-09-25 06:42:02 +10:00
43499cbe9c
Update README.md
...
oops, forgot to edit for the limiter
2017-09-25 06:29:19 +10:00
ce10fc7e3b
Merge pull request #2 from ntoff/limiter
...
Limiter
2017-09-25 06:24:37 +10:00
6699679ca2
update version
2017-09-25 06:22:27 +10:00
988512f522
rename default fan speed variable to be more clear
2017-09-06 17:52:23 +10:00
b03a045b24
self fanpwn
2017-09-05 22:57:53 +10:00
6124bba2e7
try rounding
2017-09-05 11:13:39 +10:00
554d78efb7
make same code into a function
2017-09-05 10:57:55 +10:00
525a08c20e
update settings page help text
2017-09-05 10:56:39 +10:00
2cc132213f
added some comments
2017-09-05 09:37:05 +10:00
30ee76bf7e
add a limiter
2017-09-05 03:52:55 +10:00
