docs: update changelog and header for version v2.0.0-beta1

- Removed unused function for getting current date in ISO8601 format.
- Updated JSON key names in filament and spool creation to use shorter identifiers.
- Enhanced NFC interface reset procedure with detailed logging and retry mechanisms.
- Improved stability checks after write operations to ensure NFC interface readiness.
- Added comprehensive error handling and diagnostics for NFC read/write operations.
- Streamlined the quick spool ID check to optimize performance and reliability.

CHANGELOG.md

@@ -1,5 +1,116 @@
 # Changelog
 
+## [2.0.0-beta1] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v2.0.0-beta1
+- update version to 2.0.0 in platformio.ini
+
+
+## [1.5.12-beta18] - 2025-08-29
+### Added
+- add display delay for vendor, filament, and spool creation processes
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta18
+
+### Fixed
+- replace progress bar with message display for remaining weight in sendToApi function
+
+
+## [1.5.12-beta17] - 2025-08-29
+### Added
+- add progress bar updates for vendor and filament creation processes
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta17
+- optimize page limit detection and remove redundant verification code
+
+### Fixed
+- update vendor check to use shorthand key in payload
+
+
+## [1.5.12-beta16] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta16
+- Refactor NFC interface handling and improve error diagnostics
+
+
+## [1.5.12-beta15] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta15
+- enhance NFC write operation diagnostics and improve error handling
+- enhance NFC write operation handling and prevent tag operations during write
+
+
+## [1.5.12-beta14] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta14
+- optimize JSON payload structure and enhance NFC tag validation process
+
+
+## [1.5.12-beta13] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta13
+- reorganize clearUserDataArea function for improved clarity and safety
+
+
+## [1.5.12-beta12] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta12
+
+### Fixed
+- reset NFC state on API send failure to allow retry
+- update createdFilamentId reset value to 65535 for better task handling
+- update createdVendorId reset value to 65535 for improved API handling
+
+
+## [1.5.12-beta11] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta11
+
+### Fixed
+- update spoolman ID reset values to 65535 for better API response detection
+
+
+## [1.5.12-beta10] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta10
+- streamline task creation in checkVendor and checkFilament functions
+
+
+## [1.5.12-beta9] - 2025-08-29
+### Added
+- update vendor and filament ID handling to use NULL and add delays for stability
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta9
+
+
+## [1.5.12-beta8] - 2025-08-29
+### Added
+- add delay to ensure proper setting of vendor and filament IDs after API state changes
+
+### Changed
+- update platformio.ini for beta version v1.5.12-beta8
+
+### Fixed
+- correct color_hex key usage and comment out unused date fields in spool creation
+
+
+## [1.5.12-beta7] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta7
+
+### Fixed
+- improve API state handling and vendor name formatting
+
+
+## [1.5.12-beta6] - 2025-08-29
+### Changed
+- update platformio.ini for beta version v1.5.12-beta6
+- improve task synchronization in vendor, filament, and spool creation functions
+
+
 ## [1.5.12-beta5] - 2025-08-29
 ### Added
 - enhance NDEF decoding with detailed validation and debugging output

platformio.ini

@@ -9,8 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.5.12-beta5"
+version = "2.0.0-beta1"
-to_old_version = "1.5.0"
+to_old_version = "2.0.0"
 
 ##
 [env:esp32dev]

src/api.cpp

@@ -5,21 +5,10 @@
 #include <Preferences.h>
 #include "debug.h"
 #include "scale.h"
+#include "nfc.h"
 #include <time.h>
 volatile spoolmanApiStateType spoolmanApiState = API_IDLE;
 
-// Returns current date and time in ISO8601 format
-String getCurrentDateISO8601() {
-    struct tm timeinfo;
-    if(!getLocalTime(&timeinfo)) {
-        Serial.println("Failed to obtain time");
-        return "1970-01-01T00:00:00Z";
-    }
-    char timeStringBuff[25];
-    strftime(timeStringBuff, sizeof(timeStringBuff), "%Y-%m-%dT%H:%M:%SZ", &timeinfo);
-    return String(timeStringBuff);
-}
-
 //bool spoolman_connected = false;
 String spoolmanUrl = "";
 bool octoEnabled = false;
@@ -121,7 +110,7 @@ void sendToApi(void *parameter) {
 
     // Wait until API is IDLE
     while(spoolmanApiState != API_IDLE){
-        Serial.println("Waiting!");
+        vTaskDelay(100 / portTICK_PERIOD_MS);
         yield();
     }
     spoolmanApiState = API_TRANSMITTING;
@@ -151,7 +140,7 @@ void sendToApi(void *parameter) {
     else httpCode = http.PUT(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
-        Serial.println("Spoolman erfolgreich aktualisiert");
+        Serial.println("Spoolman Abfrage erfolgreich");
 
         // Restgewicht der Spule auslesen
         String payload = http.getString();
@@ -169,7 +158,8 @@ void sendToApi(void *parameter) {
                 //oledShowMessage("Remaining: " + String(remaining_weight) + "g");
                 if(!octoEnabled){
                     // TBD: Do not use Strings...
-                    oledShowProgressBar(1, 1, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                    //oledShowProgressBar(1, 1, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                    oledShowMessage("Remaining: " + String(remainingWeight) + "g");
                     remainingWeight = 0;
                 }else{
                     // ocoto is enabled, trigger octo update
@@ -184,7 +174,8 @@ void sendToApi(void *parameter) {
                 break;
             case API_REQUEST_OCTO_SPOOL_UPDATE:
                 // TBD: Do not use Strings...
-                oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                //oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                oledShowMessage("Remaining: " + String(remainingWeight) + "g");
                 remainingWeight = 0;
                 break;
             case API_REQUEST_VENDOR_CREATE:
@@ -345,9 +336,8 @@ void sendToApi(void *parameter) {
             break;
         }
         Serial.println("Fehler beim Senden an Spoolman! HTTP Code: " + String(httpCode));
-
-        // TBD: really required?
         vTaskDelay(2000 / portTICK_PERIOD_MS);
+        nfcReaderState = NFC_IDLE; // Reset NFC state to allow retry
     }
 
     http.end();
@@ -614,9 +604,12 @@ bool updateSpoolBambuData(String payload) {
 
 // #### Brand Filament
 uint16_t createVendor(String vendor) {
+    oledShowProgressBar(2, 5, "New Brand", "Create new Vendor");
+
     // Create new vendor in Spoolman database using task system
     // Note: Due to async nature, the ID will be stored in createdVendorId global variable
-    createdVendorId = 0; // Reset previous value
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdVendorId = 65535; // Reset previous value
     
     String spoolsUrl = spoolmanUrl + apiUrl + "/vendor";
     Serial.print("Create vendor with URL: ");
@@ -626,7 +619,6 @@ uint16_t createVendor(String vendor) {
     JsonDocument vendorDoc;
     vendorDoc["name"] = vendor;
     vendorDoc["comment"] = "automatically generated";
-    vendorDoc["empty_spool_weight"] = 180;
     vendorDoc["external_id"] = vendor;
 
     String vendorPayload;
@@ -645,19 +637,18 @@ uint16_t createVendor(String vendor) {
     params->spoolsUrl = spoolsUrl;
     params->updatePayload = vendorPayload;
 
-    // Check if API is idle before creating task
+    // Create task without additional API state check since caller ensures synchronization
-    if(spoolmanApiState == API_IDLE){
+    BaseType_t result = xTaskCreate(
-        // Erstelle die Task
+        sendToApi,                // Task-Funktion
-        BaseType_t result = xTaskCreate(
+        "SendToApiTask",          // Task-Name
-            sendToApi,                // Task-Funktion
+        6144,                     // Stackgröße in Bytes
-            "SendToApiTask",          // Task-Name
+        (void*)params,            // Parameter
-            6144,                     // Stackgröße in Bytes
+        0,                        // Priorität
-            (void*)params,            // Parameter
+        NULL                      // Task-Handle (nicht benötigt)
-            0,                        // Priorität
+    );
-            NULL                      // Task-Handle (nicht benötigt)
+
-        );
+    if (result != pdPASS) {
-    } else {
+        Serial.println("Failed to create vendor task!");
-        Serial.println("Not spawning new task, API still active!");
         delete params;
         vendorDoc.clear();
         return 0;
@@ -665,20 +656,28 @@ uint16_t createVendor(String vendor) {
 
     vendorDoc.clear();
     
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+
     // Wait for task completion and return the created vendor ID
     // Note: createdVendorId will be set by sendToApi when response is received
-    while(spoolmanApiState != API_IDLE) {
+    while(createdVendorId == 65535) {
-        vTaskDelay(100 / portTICK_PERIOD_MS);
+        vTaskDelay(50 / portTICK_PERIOD_MS);
     }
     
     return createdVendorId;
 }
 
 uint16_t checkVendor(String vendor) {
+    oledShowProgressBar(1, 5, "New Brand", "Check Vendor");
+
     // Check if vendor exists using task system
-    foundVendorId = 0; // Reset previous value
+    foundVendorId = 65535; // Reset to invalid value to detect when API response is received
     
-    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor?name=" + vendor;
+    String vendorName = vendor;
+    vendorName.trim();
+    vendorName.replace(" ", "+");
+    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor?name=" + vendorName;
     Serial.print("Check vendor with URL: ");
     Serial.println(spoolsUrl);
 
@@ -693,25 +692,25 @@ uint16_t checkVendor(String vendor) {
     params->updatePayload = ""; // Empty for GET request
 
     // Check if API is idle before creating task
-    if(spoolmanApiState == API_IDLE){
+    while (spoolmanApiState != API_IDLE)
-        // Erstelle die Task
+    {
-        BaseType_t result = xTaskCreate(
+        vTaskDelay(100 / portTICK_PERIOD_MS);
-            sendToApi,                // Task-Funktion
-            "SendToApiTask",          // Task-Name
-            6144,                     // Stackgröße in Bytes
-            (void*)params,            // Parameter
-            0,                        // Priorität
-            NULL                      // Task-Handle (nicht benötigt)
-        );
-    } else {
-        Serial.println("Not spawning new task, API still active!");
-        delete params;
-        return 0;
     }
     
-    // Wait for task completion
+    // Erstelle die Task
-    while(spoolmanApiState != API_IDLE) {
+    BaseType_t result = xTaskCreate(
-        vTaskDelay(100 / portTICK_PERIOD_MS);
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        6144,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+    
+    // Wait until foundVendorId is updated by the API response (not 65535 anymore)
+    while (foundVendorId == 65535)
+    {
+        vTaskDelay(50 / portTICK_PERIOD_MS);
     }
 
     // Check if vendor was found
@@ -734,9 +733,12 @@ uint16_t checkVendor(String vendor) {
 }
 
 uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
+    oledShowProgressBar(4, 5, "New Brand", "Create Filament");
+
     // Create new filament in Spoolman database using task system
     // Note: Due to async nature, the ID will be stored in createdFilamentId global variable
-    createdFilamentId = 0; // Reset previous value
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdFilamentId = 65535; // Reset previous value
     
     String spoolsUrl = spoolmanUrl + apiUrl + "/filament";
     Serial.print("Create filament with URL: ");
@@ -744,34 +746,34 @@ uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
 
     // Create JSON payload for filament creation
     JsonDocument filamentDoc;
-    filamentDoc["name"] = payload["name"].as<String>();
+    filamentDoc["name"] = payload["cn"].as<String>();
     filamentDoc["vendor_id"] = String(vendorId);
-    filamentDoc["material"] = payload["type"].as<String>();
+    filamentDoc["material"] = payload["t"].as<String>();
-    filamentDoc["density"] = (payload["density"].is<String>() && payload["density"].as<String>().length() > 0) ? payload["density"].as<String>() : "1.24";
+    filamentDoc["density"] = (payload["de"].is<String>() && payload["de"].as<String>().length() > 0) ? payload["de"].as<String>() : "1.24";
-    filamentDoc["diameter"] = (payload["diameter"].is<String>() && payload["diameter"].as<String>().length() > 0) ? payload["diameter"].as<String>() : "1.75";
+    filamentDoc["diameter"] = (payload["di"].is<String>() && payload["di"].as<String>().length() > 0) ? payload["di"].as<String>() : "1.75";
-    filamentDoc["weight"] = payload["weight"].as<String>();
+    filamentDoc["weight"] = String(weight);
-    filamentDoc["spool_weight"] = payload["spool_weight"].as<String>();
+    filamentDoc["spool_weight"] = payload["sw"].as<String>();
-    filamentDoc["article_number"] = payload["artnr"].as<String>();
+    filamentDoc["article_number"] = payload["an"].as<String>();
-    filamentDoc["extruder_temp"] = payload["extruder_temp"].is<String>() ? payload["extruder_temp"].as<String>() : "";
+    filamentDoc["settings_extruder_temp"] = payload["et"].is<String>() ? payload["et"].as<String>() : "";
-    filamentDoc["bed_temp"] = payload["bed_temp"].is<String>() ? payload["bed_temp"].as<String>() : "";
+    filamentDoc["settings_bed_temp"] = payload["bt"].is<String>() ? payload["bt"].as<String>() : "";
-    
+
-    if (payload["artnr"].is<String>())
+    if (payload["an"].is<String>())
     {
-        filamentDoc["external_id"] = payload["artnr"].as<String>();
+        filamentDoc["external_id"] = payload["an"].as<String>();
-        filamentDoc["comment"] = payload["url"].is<String>() ? payload["url"].as<String>() + payload["artnr"].as<String>() : "automatically generated";
+        filamentDoc["comment"] = payload["u"].is<String>() ? payload["u"].as<String>() + payload["an"].as<String>() : "automatically generated";
     }
     else
     {
-        filamentDoc["comment"] = payload["url"].is<String>() ? payload["url"].as<String>() : "automatically generated";
+        filamentDoc["comment"] = payload["u"].is<String>() ? payload["u"].as<String>() : "automatically generated";
     }
 
-    if (payload["multi_color_hexes"].is<String>()) {
+    if (payload["mc"].is<String>()) {
-        filamentDoc["multi_color_hexes"] = payload["multi_color_hexes"].as<String>();
+        filamentDoc["multi_color_hexes"] = payload["mc"].as<String>();
-        filamentDoc["multi_color_direction"] = payload["multi_color_direction"].is<String>() ? payload["multi_color_direction"].as<String>() : "";
+        filamentDoc["multi_color_direction"] = payload["mcd"].is<String>() ? payload["mcd"].as<String>() : "";
     }
     else
     {
-        filamentDoc["color_hex"] = (payload["color"].is<String>() && payload["color"].as<String>().length() >= 6) ? payload["color"].as<String>() : "FFFFFF";
+        filamentDoc["color_hex"] = (payload["c"].is<String>() && payload["c"].as<String>().length() >= 6) ? payload["c"].as<String>() : "FFFFFF";
     }
 
     String filamentPayload;
@@ -790,19 +792,18 @@ uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
     params->spoolsUrl = spoolsUrl;
     params->updatePayload = filamentPayload;
 
-    // Check if API is idle before creating task
+    // Create task without additional API state check since caller ensures synchronization
-    if(spoolmanApiState == API_IDLE){
+    BaseType_t result = xTaskCreate(
-        // Erstelle die Task
+        sendToApi,                // Task-Funktion
-        BaseType_t result = xTaskCreate(
+        "SendToApiTask",          // Task-Name
-            sendToApi,                // Task-Funktion
+        6144,                     // Stackgröße in Bytes
-            "SendToApiTask",          // Task-Name
+        (void*)params,            // Parameter
-            6144,                     // Stackgröße in Bytes
+        0,                        // Priorität
-            (void*)params,            // Parameter
+        NULL                      // Task-Handle (nicht benötigt)
-            0,                        // Priorität
+    );
-            NULL                      // Task-Handle (nicht benötigt)
+
-        );
+    if (result != pdPASS) {
-    } else {
+        Serial.println("Failed to create filament task!");
-        Serial.println("Not spawning new task, API still active!");
         delete params;
         filamentDoc.clear();
         return 0;
@@ -810,18 +811,23 @@ uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
 
     filamentDoc.clear();
     
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+
     // Wait for task completion and return the created filament ID
     // Note: createdFilamentId will be set by sendToApi when response is received
-    while(spoolmanApiState != API_IDLE) {
+    while(createdFilamentId == 65535) {
-        vTaskDelay(100 / portTICK_PERIOD_MS);
+        vTaskDelay(50 / portTICK_PERIOD_MS);
     }
     
     return createdFilamentId;
 }
 
 uint16_t checkFilament(uint16_t vendorId, const JsonDocument& payload) {
+    oledShowProgressBar(3, 5, "New Brand", "Check Filament");
+
     // Check if filament exists using task system
-    foundFilamentId = 0; // Reset previous value
+    foundFilamentId = 65535; // Reset to invalid value to detect when API response is received
 
     String spoolsUrl = spoolmanUrl + apiUrl + "/filament?vendor.id=" + String(vendorId) + "&external_id=" + String(payload["artnr"].as<String>());
     Serial.print("Check filament with URL: ");
@@ -837,26 +843,19 @@ uint16_t checkFilament(uint16_t vendorId, const JsonDocument& payload) {
     params->spoolsUrl = spoolsUrl;
     params->updatePayload = ""; // Empty for GET request
 
-    // Check if API is idle before creating task
+     // Erstelle die Task
-    if(spoolmanApiState == API_IDLE){
+    BaseType_t result = xTaskCreate(
-        // Erstelle die Task
+        sendToApi,                // Task-Funktion
-        BaseType_t result = xTaskCreate(
+        "SendToApiTask",          // Task-Name
-            sendToApi,                // Task-Funktion
+        6144,                     // Stackgröße in Bytes
-            "SendToApiTask",          // Task-Name
+        (void*)params,            // Parameter
-            6144,                     // Stackgröße in Bytes
+        0,                        // Priorität
-            (void*)params,            // Parameter
+        NULL                      // Task-Handle (nicht benötigt)
-            0,                        // Priorität
+    );
-            NULL                      // Task-Handle (nicht benötigt)
-        );
-    } else {
-        Serial.println("Not spawning new task, API still active!");
-        delete params;
-        return 0;
-    }
     
-    // Wait for task completion
+    // Wait until foundFilamentId is updated by the API response (not 65535 anymore)
-    while(spoolmanApiState != API_IDLE) {
+    while (foundFilamentId == 65535) {
-        vTaskDelay(100 / portTICK_PERIOD_MS);
+        vTaskDelay(50 / portTICK_PERIOD_MS);
     }
 
     // Check if filament was found
@@ -879,25 +878,24 @@ uint16_t checkFilament(uint16_t vendorId, const JsonDocument& payload) {
 }
 
 uint16_t createSpool(uint16_t vendorId, uint16_t filamentId, JsonDocument& payload, String uidString) {
+    oledShowProgressBar(5, 5, "New Brand", "Create new Spool");
+
     // Create new spool in Spoolman database using task system
     // Note: Due to async nature, the ID will be stored in createdSpoolId global variable
-    createdSpoolId = 0; // Reset previous value
+    // Note: This function assumes that the caller has already ensured API is IDLE
+    createdSpoolId = 65535; // Reset to invalid value to detect when API response is received
     
     String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
     Serial.print("Create spool with URL: ");
     Serial.println(spoolsUrl);
-    String currentDate = getCurrentDateISO8601();
 
     // Create JSON payload for spool creation
     JsonDocument spoolDoc;
-    spoolDoc["first_used"] = String(currentDate);
-    spoolDoc["last_used"] = String(currentDate);
     spoolDoc["filament_id"] = String(filamentId);
-    spoolDoc["initial_weight"] = weight > 10 ? String(weight) : "1000";
+    spoolDoc["initial_weight"] = weight > 10 ? String(weight - payload["sw"].as<int>()) : "1000";
-    spoolDoc["spool_weight"] = (payload["spool_weight"].is<String>() && payload["spool_weight"].as<String>().length() > 0) ? payload["spool_weight"].as<String>() : "180";
+    spoolDoc["spool_weight"] = (payload["sw"].is<String>() && payload["sw"].as<String>().length() > 0) ? payload["sw"].as<String>() : "180";
-    spoolDoc["remaining_weight"] = (payload["weight"].is<String>() && payload["weight"].as<String>().length() > 0) ? payload["weight"].as<String>() : "1000";
+    spoolDoc["remaining_weight"] = spoolDoc["initial_weight"];
-    spoolDoc["used_weight"] = "0";
+    spoolDoc["lot_nr"] = (payload["an"].is<String>() && payload["an"].as<String>().length() > 0) ? payload["an"].as<String>() : "";
-    spoolDoc["lot_nr"] = (payload["lotnr"].is<String>() && payload["lotnr"].as<String>().length() > 0) ? payload["lotnr"].as<String>() : "";
     spoolDoc["comment"] = "automatically generated";
     spoolDoc["extra"]["nfc_id"] = "\"" + uidString + "\"";
 
@@ -918,42 +916,57 @@ uint16_t createSpool(uint16_t vendorId, uint16_t filamentId, JsonDocument& paylo
     params->spoolsUrl = spoolsUrl;
     params->updatePayload = spoolPayload;
 
-    // Check if API is idle before creating task
+    // Create task without additional API state check since caller ensures synchronization
-    if(spoolmanApiState == API_IDLE){
+    BaseType_t result = xTaskCreate(
-        // Erstelle die Task
+        sendToApi,                // Task-Funktion
-        BaseType_t result = xTaskCreate(
+        "SendToApiTask",          // Task-Name
-            sendToApi,                // Task-Funktion
+        6144,                     // Stackgröße in Bytes
-            "SendToApiTask",          // Task-Name
+        (void*)params,            // Parameter
-            6144,                     // Stackgröße in Bytes
+        0,                        // Priorität
-            (void*)params,            // Parameter
+        NULL                      // Task-Handle (nicht benötigt)
-            0,                        // Priorität
+    );
-            NULL                      // Task-Handle (nicht benötigt)
+
-        );
+    if (result != pdPASS) {
-    } else {
+        Serial.println("Failed to create spool task!");
-        Serial.println("Not spawning new task, API still active!");
         delete params;
         return 0;
     }
     
     // Wait for task completion and return the created spool ID
     // Note: createdSpoolId will be set by sendToApi when response is received
-    while(spoolmanApiState != API_IDLE) {
+    while(createdSpoolId == 65535) {
-        vTaskDelay(100 / portTICK_PERIOD_MS);
+        vTaskDelay(50 / portTICK_PERIOD_MS);
     }
 
-    // daten mit startWriteJsonToTag schreiben
+    // Write data to tag with startWriteJsonToTag
     // void startWriteJsonToTag(const bool isSpoolTag, const char* payload);
-    payload["sm_id"].set(String(createdSpoolId));
+    
+    // Create optimized JSON structure with sm_id at the beginning for fast-path detection
+    JsonDocument optimizedPayload;
+    optimizedPayload["sm_id"] = String(createdSpoolId);  // Place sm_id first for fast scanning
+    optimizedPayload["b"] = payload["b"].as<String>();
+    optimizedPayload["cn"] = payload["an"].as<String>();
     
     String payloadString;
-    serializeJson(payload, payloadString);
+    serializeJson(optimizedPayload, payloadString);
+    
+    Serial.println("Optimized JSON with sm_id first:");
+    Serial.println(payloadString);
+    
+    optimizedPayload.clear();
+    
+    nfcReaderState = NFC_IDLE;
+
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+    
     startWriteJsonToTag(true, payloadString.c_str());
 
     return createdSpoolId;
 }
 
 bool createBrandFilament(JsonDocument& payload, String uidString) {
-    uint16_t vendorId = checkVendor(payload["brand"].as<String>());
+    uint16_t vendorId = checkVendor(payload["b"].as<String>());
     if (vendorId == 0) {
         Serial.println("ERROR: Failed to create/find vendor");
         return false;

src/display.cpp

@@ -235,7 +235,7 @@ void oledShowIcon(const char* icon) {
     display.display();
 }
 
-void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char* largeText, const char* statusMessage){
+void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char* largeText, const char* statusMessage) {
     assert(step <= numSteps);
 
     // clear data and bar area

src/nfc.h

@@ -16,6 +16,7 @@ typedef enum{
 void startNfc();
 void scanRfidTask(void * parameter);
 void startWriteJsonToTag(const bool isSpoolTag, const char* payload);
+bool quickSpoolIdCheck(String uidString);
 
 extern TaskHandle_t RfidReaderTask;
 extern String nfcJsonData;
@@ -23,6 +24,7 @@ extern String activeSpoolId;
 extern String lastSpoolId;
 extern volatile nfcReaderStateType nfcReaderState;
 extern volatile bool pauseBambuMqttTask;
+extern volatile bool nfcWriteInProgress;
 extern bool tagProcessed;
 
 

src/scale.cpp

@@ -48,8 +48,6 @@ void scale_loop(void * parameter) {
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
 
-  scale.tare();
-
   for(;;) {
     if (scale.is_ready()) 
     {
@@ -119,12 +117,13 @@ void start_scale(bool touchSensorConnected) {
     esp_task_wdt_reset();
   }
 
-  if (scale.wait_ready_timeout(1000))
+  while(!scale.is_ready()) {
-  {
+    vTaskDelay(pdMS_TO_TICKS(5000));
-    scale.set_scale(calibrationValue); // this value is obtained by calibrating the scale with known weights; see the README for details
-    //scale.tare();
   }
 
+  scale.set_scale(calibrationValue); // this value is obtained by calibrating the scale with known weights; see the README for details
+  scale.tare();
+
   // Display Gewicht
   oledShowWeight(0);