fix: replace progress bar with message display for remaining weight in sendToApi function

src/api.cpp

@@ -158,7 +158,8 @@ void sendToApi(void *parameter) {
                 //oledShowMessage("Remaining: " + String(remaining_weight) + "g");
                 if(!octoEnabled){
                     // TBD: Do not use Strings...
-                    oledShowProgressBar(1, 1, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                    //oledShowProgressBar(1, 1, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                    oledShowMessage("Remaining: " + String(remainingWeight) + "g");
                     remainingWeight = 0;
                 }else{
                     // ocoto is enabled, trigger octo update
@@ -173,7 +174,8 @@ void sendToApi(void *parameter) {
                 break;
             case API_REQUEST_OCTO_SPOOL_UPDATE:
                 // TBD: Do not use Strings...
-                oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                //oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
+                oledShowMessage("Remaining: " + String(remainingWeight) + "g");
                 remainingWeight = 0;
                 break;
             case API_REQUEST_VENDOR_CREATE:
@@ -654,6 +656,9 @@ uint16_t createVendor(String vendor) {
 
     vendorDoc.clear();
     
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+
     // Wait for task completion and return the created vendor ID
     // Note: createdVendorId will be set by sendToApi when response is received
     while(createdVendorId == 65535) {
@@ -806,6 +811,9 @@ uint16_t createFilament(uint16_t vendorId, const JsonDocument& payload) {
 
     filamentDoc.clear();
     
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+
     // Wait for task completion and return the created filament ID
     // Note: createdFilamentId will be set by sendToApi when response is received
     while(createdFilamentId == 65535) {
@@ -948,7 +956,10 @@ uint16_t createSpool(uint16_t vendorId, uint16_t filamentId, JsonDocument& paylo
     optimizedPayload.clear();
     
     nfcReaderState = NFC_IDLE;
-    vTaskDelay(50 / portTICK_PERIOD_MS);
+
+    // Delay for Display Bar
+    vTaskDelay(1000 / portTICK_PERIOD_MS);
+    
     startWriteJsonToTag(true, payloadString.c_str());
 
     return createdSpoolId;

src/scale.cpp

@@ -48,9 +48,6 @@ void scale_loop(void * parameter) {
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
 
-  vTaskDelay(pdMS_TO_TICKS(500));
-  scale_tare_counter = 10; // damit beim Starten der Waage automatisch getart wird
-  
   for(;;) {
     if (scale.is_ready()) 
     {
@@ -120,12 +117,13 @@ void start_scale(bool touchSensorConnected) {
     esp_task_wdt_reset();
   }
 
-  if (scale.wait_ready_timeout(1000))
-  {
-    scale.set_scale(calibrationValue); // this value is obtained by calibrating the scale with known weights; see the README for details
-    //scale.tare();
+  while(!scale.is_ready()) {
+    vTaskDelay(pdMS_TO_TICKS(5000));
   }
 
+  scale.set_scale(calibrationValue); // this value is obtained by calibrating the scale with known weights; see the README for details
+  scale.tare();
+
   // Display Gewicht
   oledShowWeight(0);