docs: update changelog and header for version v1.4.4

Usermod for M3 heat inserts and AliExpress parts

.github/workflows/gitea-release.yml

@@ -41,16 +41,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Build firmware and SPIFFS
-        echo "Building firmware and SPIFFS..."
+        # Build firmware and LittleFS
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        # Create LittleFS binary - direct copy without header
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary
         (cd .pio/build/esp32dev && 
@@ -63,7 +63,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"

.github/workflows/github-release.yml

@@ -39,16 +39,16 @@ jobs:
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
         
-        # Always build firmware and SPIFFS
-        echo "Building firmware and SPIFFS..."
+        # Always build firmware and LittleFS
+        echo "Building firmware and LittleFS..."
         pio run -e esp32dev
         pio run -t buildfs
         
         # Copy firmware binary
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
         
-        # Create SPIFFS binary - direct copy without header
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        # Create LittleFS binary - direct copy without header
+        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
         (cd .pio/build/esp32dev && 
@@ -61,7 +61,7 @@ jobs:
           0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x3D0000 spiffs.bin)
+          0x3D0000 littlefs.bin)
         
         # Verify file sizes
         echo "File sizes:"
@@ -131,7 +131,7 @@ jobs:
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
         fi
         
-        # Add SPIFFS and full binary only if they exist
+        # Add LittleFS and full binary only if they exist
         if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
           FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
         fi

CHANGELOG.md

@@ -1,5 +1,111 @@
 # Changelog
 
+## [1.4.4] - 2025-03-23
+### Added
+- add error handling for missing vendor IDs in filament data
+
+### Changed
+- update platformio.ini for version v1.4.4
+
+### Fixed
+- adjust weight threshold for tare check to allow negative values
+
+
+## [1.4.3] - 2025-03-23
+### Changed
+- update platformio.ini for version v1.4.3
+
+
+## [1.4.2] - 2025-03-23
+### Added
+- add WiFi connection check and restart Bambu if not connected
+
+### Changed
+- update platformio.ini for version v1.4.2
+- increase stack size for BambuMqtt task
+- update Discord Link
+- update Discord Link
+- remove commented-out subscription topic in MQTT setup
+
+### Fixed
+- use unique client ID for MQTT connection to avoid conflicts
+- reload page after firmware update completion
+- increase WiFi connection timeout from 5 to 10 seconds
+- ensure valid URL format and remove trailing slash in setupWebserver
+
+
+## [1.4.1] - 2025-03-10
+### Added
+- added new .step, now with correct individual parts
+- added changelog
+- Add files via upload
+- added .stp files of modifications
+- added merged picture
+- added pictures of components bought from AliE
+- Add files via upload
+- added pictures for heat insert location
+- added pictures showing heat insert location
+- remove unnecessary delay in MQTT setup and add delay before restart
+- add new 3D print file for Filaman scale
+- added Discord Server
+
+### Changed
+- update platformio.ini for version v1.4.1
+- refactor length calculation to convert total length to meters before formatting
+- Merge pull request #16 from spitzbirne32/main
+- improved housing to show display better
+- removed CAD, as they were all duplicates
+- typo in AliE link
+- Delete usermod/spitzbirne32/STL/README.md
+- Update README.md
+- moved pictures of parts into dedicated folders
+- Update README.md
+- Update README.md
+- Update README.md
+- Delete usermod/spitzbirne32/STL/ScaleTop_Heatinsert_Location_usermod_spitzbirne32_.png
+- Delete usermod/spitzbirne32/STL/Housing_Heatinsert_Location_usermod_spitzbirne32_.png
+- created folders
+- Update README.md
+- Update README.md
+- Create README.md
+- Update README.md
+- Update README.md
+- Create README.md
+- Merge pull request #15 from ManuelW77/main
+- Merge pull request #14 from janecker/scale-calibration-rework
+- Reworks the scale calibration handling
+- remove redundant scale calibration checks and enhance task management
+- enhance AMS data handling and streamline spool auto-setting logic
+- adjust stack size and improve scale calibration logic
+- update labels and input types for better clarity and functionality
+- update documentation for clarity and accuracy
+
+### Fixed
+- correct typo in console log for total length
+
+
+## [1.4.0] - 2025-03-01
+### Added
+- add support for Spoolman Octoprint Plugin in README files
+- add OctoPrint integration with configurable fields and update functionality
+- add version comparison function and check for outdated versions before updates
+- remove unused version and protocol fields from JSON output; add error message for insufficient memory
+
+### Changed
+- update NFC tag references to include NTAG213 and clarify storage capacity
+- bump version to 1.4.0
+- remove unused version and protocol fields from NFC data packet
+- sort vendors alphabetically in the dropdown list
+- Merge pull request #10 from janecker/nfc-improvements
+- Improves NFC Tag handling
+
+
+## [1.3.99] - 2025-02-28
+### Changed
+- update platformio.ini for version v1.3.99
+- update workflows to build firmware with LittleFS instead of SPIFFS
+
+
 ## [1.3.98] - 2025-02-28
 ### Changed
 - update platformio.ini for version v1.3.98

README.de.md

@@ -8,7 +8,8 @@ Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/
 
 Weitere Bilder finden Sie im [img Ordner](/img/)
 oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
-Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
 
 ### Es gibt jetzt auch ein Wiki, dort sind nochmal alle Funktionen beschrieben: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
@@ -18,7 +19,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 - **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
 - **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
 - **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
-- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+- **NFC-Tag NTAG213 NTAG215:** Verwendung von NTAG213, besser NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
 
 ### Weboberflächen-Funktionen
 - **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
@@ -35,6 +36,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - Filtern und Auswählen von Filamenten.
   - Automatische Aktualisierung der Spulengewichte.
   - Verfolgung von NFC-Tag-Zuweisungen.
+  - Unterstützt das Spoolman Octoprint Plugin
 
 ### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -61,7 +63,7 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTA215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration

README.md

@@ -6,12 +6,14 @@ FilaMan is a filament management system for 3D printing. It uses ESP32 hardware
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.
 
+
 ![Scale](./img/scale_trans.png)
 
 
 More Images can be found in the [img Folder](/img/)  
-or my website:[FilaMan Website](https://www.filaman.app)  
-german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+or my website: [FilaMan Website](https://www.filaman.app)  
+german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)  
+Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
 
 ### Now more detailed informations about the usage: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
@@ -21,7 +23,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - **OLED Display:** Shows current weight, connection status (WiFi, Bambu Lab, Spoolman).
 - **WiFi Connectivity:** WiFiManager for easy network configuration.
 - **MQTT Integration:** Connects to Bambu Lab printer for AMS control.
-- **NFC-Tag NTAG215:** Use NTAG215 because of enaught space on the Tag
+- **NFC-Tag NTAG213 NTAG215:** Use NTAG213, better NTAG215 because of enaught space on the Tag
 
 ### Web Interface Features
 - **Real-time Updates:** WebSocket connection for live data updates.
@@ -38,6 +40,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - Filter and select filaments.
   - Update spool weights automatically.
   - Track NFC tag assignments.
+  - Supports Spoolman Octoprint Plugin
 
 ### If you want to support my work, i would be happy to get a coffe
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -64,7 +67,7 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 [Amazon Link](https://amzn.eu/d/0AuBp2c)
 - **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
 [Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC Tags Ntag215:** RFID Tag
+- **NFC Tags NTAG213 NTAG215:** RFID Tag
 [Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 

html/rfid.js

@@ -640,8 +640,6 @@ function writeNfcTag() {
 
     // Erstelle das NFC-Datenpaket mit korrekten Datentypen
     const nfcData = {
-        version: "2.0",
-        protocol: "openspool",
         color_hex: selectedSpool.filament.color_hex || "FFFFFF",
         type: selectedSpool.filament.material,
         min_temp: minTemp,

html/spoolman.html

@@ -52,11 +52,18 @@
             if (spoolmanUrl && spoolmanUrl.trim() !== "") {
                 document.getElementById('spoolmanUrl').value = spoolmanUrl;
             }
+            
+            // Initialize OctoPrint fields visibility
+            toggleOctoFields();
         };
 
         function checkSpoolmanInstance() {
             const url = document.getElementById('spoolmanUrl').value;
-            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}`)
+            const spoolmanOctoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            const spoolmanOctoUrl = document.getElementById('spoolmanOctoUrl').value;
+            const spoolmanOctoToken = document.getElementById('spoolmanOctoToken').value;
+            
+            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}&octoEnabled=${spoolmanOctoEnabled}&octoUrl=${spoolmanOctoUrl}&octoToken=${spoolmanOctoToken}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -90,6 +97,15 @@
                     document.getElementById('bambuStatusMessage').innerText = 'Error while saving: ' + error.message;
                 });
         }
+
+        /**
+         * Controls visibility of OctoPrint configuration fields based on checkbox state
+         * Called on page load and when checkbox changes
+         */
+        function toggleOctoFields() {
+            const octoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            document.getElementById('octoFields').style.display = octoEnabled ? 'block' : 'none';
+        }
     </script>
     <script>
         var spoolmanUrl = "{{spoolmanUrl}}";
@@ -102,6 +118,17 @@
             <div class="card-body">
                 <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
                 <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
+                <h5 class="card-title">If you want to enable sending Spool to Spoolman Octoprint Plugin:</h5>
+                <p>
+                    <input type="checkbox" id="spoolmanOctoEnabled" {{spoolmanOctoEnabled}} onchange="toggleOctoFields()"> Send to Octo-Plugin
+                </p>
+                <div id="octoFields" style="display: none;">
+                    <p>
+                        <input type="text" id="spoolmanOctoUrl" placeholder="http://ip-or-url-of-your-octoprint-instanz:port" value="{{spoolmanOctoUrl}}">
+                        <input type="text" id="spoolmanOctoToken" placeholder="Your Octoprint Token" value="{{spoolmanOctoToken}}">
+                    </p>
+                </div>
+                
                 <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
                 <p id="statusMessage"></p>
             </div>
@@ -127,11 +154,11 @@
                     <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
                     <div class="input-group" style="display: flex; margin-bottom: 0;">
                         <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
-                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait time in Seconds:</label>
+                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait for Spool in Sec:</label>
                     </div>
                     <div class="input-group" style="display: flex;">
                         <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
-                        <input type="text" id="autoSendTime" placeholder="Time to wait for new Spool" value="{{autoSendTime}}" style="width: 100px;">
+                        <input type="number" min="60" id="autoSendTime" placeholder="Time to wait" value="{{autoSendTime}}" style="width: 100px;">
                     </div>
 
                     <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>

html/spoolman.js

@@ -86,10 +86,10 @@ function populateVendorDropdown(data, selectedSmId = null) {
     });
 
     // Nach der Schleife: Formatierung der Gesamtlänge
-    console.log("Total Lenght: ", totalLength);
-    const formattedLength = totalLength > 1000 
-        ? (totalLength / 1000).toFixed(2) + " km" 
-        : totalLength.toFixed(2) + " m";
+    const lengthInM = totalLength / 1000;  // erst in m umrechnen
+    const formattedLength = lengthInM > 1000 
+        ? (lengthInM / 1000).toFixed(2) + " km" 
+        : lengthInM.toFixed(2) + " m";
 
     // Formatierung des Gesamtgewichts (von g zu kg zu t)
     const weightInKg = totalWeight / 1000;  // erst in kg umrechnen
@@ -97,13 +97,15 @@ function populateVendorDropdown(data, selectedSmId = null) {
         ? (weightInKg / 1000).toFixed(2) + " t" 
         : weightInKg.toFixed(2) + " kg";
 
-    // Dropdown mit gefilterten Herstellern befüllen
-    Object.entries(filteredVendors).forEach(([id, name]) => {
-        const option = document.createElement("option");
-        option.value = id;
-        option.textContent = name;
-        vendorSelect.appendChild(option);
-    });
+    // Dropdown mit gefilterten Herstellern befüllen - alphabetisch sortiert
+    Object.entries(filteredVendors)
+        .sort(([, nameA], [, nameB]) => nameA.localeCompare(nameB)) // Sort vendors alphabetically by name
+        .forEach(([id, name]) => {
+            const option = document.createElement("option");
+            option.value = id;
+            option.textContent = name;
+            vendorSelect.appendChild(option);
+        });
 
     document.getElementById("totalSpools").textContent = totalSpools;
     document.getElementById("spoolsWithoutTag").textContent = spoolsWithoutTag;
@@ -145,6 +147,13 @@ function updateFilamentDropdown(selectedSmId = null) {
 
     if (vendorId) {
         const filteredFilaments = spoolsData.filter(spool => {
+            if (!spool?.filament?.vendor?.id) {
+                console.log('Problem aufgetreten bei: ', spool?.filament?.vendor);
+                console.log('Problematische Spulen:', 
+                    spoolsData.filter(spool => !spool?.filament?.vendor?.id));
+                return false;
+            }
+
             const hasValidNfcId = spool.extra && 
                                  spool.extra.nfc_id && 
                                  spool.extra.nfc_id !== '""' && 
@@ -238,18 +247,6 @@ async function fetchSpoolData() {
     }
 }
 
-/*
-// Exportiere Funktionen
-window.getSpoolData = () => spoolsData;
-window.reloadSpoolData = initSpoolman;
-window.populateVendorDropdown = populateVendorDropdown;
-window.updateFilamentDropdown = updateFilamentDropdown;
-window.toggleFilamentDropdown = () => {
-    const content = document.getElementById("filament-dropdown-content");
-    content.classList.toggle("show");
-};
-*/
-
 // Event Listener
 document.addEventListener('DOMContentLoaded', () => {
     initSpoolman();

html/style.css

@@ -188,14 +188,18 @@ label {
     font-weight: bold; 
 }
 
-input[type="text"], input[type="submit"] { 
+input[type="text"], input[type="submit"], input[type="number"] { 
     padding: 10px; 
     border: 1px solid #ccc; 
     border-radius: 5px; 
     font-size: 16px; 
 }
 
-input[type="text"]:focus { 
+input[type="number"] { 
+    width: 108px !important; 
+}
+
+input[type="text"]:focus, input[type="number"]:focus { 
     border-color: #007bff; 
     outline: none; 
 }

html/upgrade.html

@@ -129,6 +129,7 @@
                             if (data.status === 'success' || lastReceivedProgress >= 98) {
                                 clearTimeout(wsReconnectTimer);
                                 setTimeout(() => {
+                                    window.location.reload(true);
                                     window.location.href = '/';
                                 }, 30000);
                             }
@@ -148,6 +149,7 @@
                         status.style.display = 'block';
                         clearTimeout(wsReconnectTimer);
                         setTimeout(() => {
+                            window.location.reload(true);
                             window.location.href = '/';
                         }, 30000);
                     } else {

platformio.ini

@@ -9,7 +9,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.98"
+version = "1.4.4"
+to_old_version = "1.4.0"
+
 ##
 [env:esp32dev]
 platform = espressif32
@@ -48,6 +50,7 @@ build_flags =
     #-DNDEBUG
     -mtext-section-literals
     -DVERSION=\"${common.version}\"
+    -DTOOLDVERSION=\"${common.to_old_version}\"
     -DASYNCWEBSERVER_REGEX
     #-DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1

src/api.cpp

@@ -5,11 +5,15 @@
 
 bool spoolman_connected = false;
 String spoolmanUrl = "";
+bool octoEnabled = false;
+String octoUrl = "";
+String octoToken = "";
 
 struct SendToApiParams {
     String httpType;
     String spoolsUrl;
     String updatePayload;
+    String octoToken;
 };
 
 JsonDocument fetchSingleSpoolInfo(int spoolId) {
@@ -87,14 +91,16 @@ void sendToApi(void *parameter) {
     String httpType = params->httpType;
     String spoolsUrl = params->spoolsUrl;
     String updatePayload = params->updatePayload;
-    
+    String octoToken = params->octoToken;    
 
     HTTPClient http;
     http.begin(spoolsUrl);
     http.addHeader("Content-Type", "application/json");
+    if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
 
     int httpCode = http.PUT(updatePayload);
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
+    if (httpType == "POST") httpCode = http.POST(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
         Serial.println("Spoolman erfolgreich aktualisiert");
@@ -198,6 +204,43 @@ uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
     return 1;
 }
 
+bool updateSpoolOcto(int spoolId) {
+    String spoolsUrl = octoUrl + "/plugin/Spoolman/selectSpool";
+    Serial.print("Update Spule in Octoprint mit URL: ");
+    Serial.println(spoolsUrl);
+
+    JsonDocument updateDoc;
+    updateDoc["spool_id"] = spoolId;
+    updateDoc["tool"] = "tool0";
+
+    String updatePayload;
+    serializeJson(updateDoc, updatePayload);
+    Serial.print("Update Payload: ");
+    Serial.println(updatePayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return false;
+    }
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = updatePayload;
+    params->octoToken = octoToken;
+
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        4096,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    return true;
+}
+
 bool updateSpoolBambuData(String payload) {
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, payload);
@@ -435,17 +478,24 @@ bool checkSpoolmanInstance(const String& url) {
     return false;
 }
 
-bool saveSpoolmanUrl(const String& url) {
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk) {
     if (!checkSpoolmanInstance(url)) return false;
 
     JsonDocument doc;
     doc["url"] = url;
-    Serial.print("Speichere URL in Datei: ");
-    Serial.println(url);
+    doc["octoEnabled"] = octoOn;
+    doc["octoUrl"] = octoWh;
+    doc["octoToken"] = octoTk;
+    Serial.print("Speichere Spoolman Data in Datei: ");
+    Serial.println(doc.as<String>());
     if (!saveJsonValue("/spoolman_url.json", doc)) {
         Serial.println("Fehler beim Speichern der Spoolman-URL.");
+        return false;
     }
     spoolmanUrl = url;
+    octoEnabled = octoOn;
+    octoUrl = octoWh;
+    octoToken = octoTk;
 
     return true;
 }
@@ -453,6 +503,13 @@ bool saveSpoolmanUrl(const String& url) {
 String loadSpoolmanUrl() {
     JsonDocument doc;
     if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
+        octoEnabled = (doc["octoEnabled"].is<bool>()) ? doc["octoEnabled"].as<bool>() : false;
+        if (octoEnabled && doc["octoToken"].is<String>() && doc["octoUrl"].is<String>())
+        {
+            octoUrl = doc["octoUrl"].as<String>();
+            octoToken = doc["octoToken"].as<String>();
+        }
+
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -9,9 +9,12 @@
 
 extern bool spoolman_connected;
 extern String spoolmanUrl;
+extern bool octoEnabled;
+extern String octoUrl;
+extern String octoToken;
 
 bool checkSpoolmanInstance(const String& url);
-bool saveSpoolmanUrl(const String& url);
+bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
 JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
@@ -19,5 +22,6 @@ bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion z
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
 bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
+bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
 
 #endif

src/bambu.cpp

@@ -341,7 +341,7 @@ void updateAmsWsData(JsonDocument& doc, JsonArray& amsArray, int& ams_count, Jso
             ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
             ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
             ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
-            //ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
+            if (trayObj["tray_type"].as<String>() == "") ams_data[i].trays[j].setting_id = "";
             ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
         }
     }
@@ -425,16 +425,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         return;
     }
 
-    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
-    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
-        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
-        && !doc["print"]["ams"]["ams"].as<JsonArray>())
-    {
-        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
-    }
-
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    if (doc["print"]["upgrade_state"].is<JsonObject>() || (doc["print"]["command"].is<String>() && doc["print"]["command"] == "push_status")) 
     {
         // Prüfen ob AMS-Daten vorhanden sind
         if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
@@ -443,7 +435,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         JsonArray amsArray = doc["print"]["ams"]["ams"].as<JsonArray>();
-        
+
         // Prüfe ob sich die AMS-Daten geändert haben
         bool hasChanges = false;
         
@@ -479,6 +471,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                     (trayObj["setting_id"].as<String>() != "" && trayObj["setting_id"].as<String>() != ams_data[storedIndex].trays[j].setting_id) ||
                     trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
+
+                    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                    {
+                        autoSetSpool(autoSetToBambuSpoolId, ams_data[storedIndex].trays[j].id);
+                    }
+
                     break;
                 }
             }
@@ -497,6 +495,11 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                         (vtTray["setting_id"].as<String>() != "" && vtTray["setting_id"].as<String>() != ams_data[i].trays[0].setting_id) ||
                         (vtTray["tray_type"].as<String>() != "" && vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx)) {
                         hasChanges = true;
+
+                        if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
+                        {
+                            autoSetSpool(autoSetToBambuSpoolId, 254);
+                        }
                     }
                     break;
                 }
@@ -550,7 +553,8 @@ void reconnect() {
         oledShowTopRow();
 
         // Attempt to connect
-        if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) {
+        String clientId = String(bambu_serialnr) + "_" + String(random(0, 100));
+        if (client.connect(clientId.c_str(), bambu_username, bambu_accesscode)) {
             Serial.println("MQTT re/connected");
 
             client.subscribe(report_topic.c_str());
@@ -600,7 +604,6 @@ void mqtt_loop(void * parameter) {
 bool setupMqtt() {
     // Wenn Bambu Daten vorhanden
     bool success = loadBambuCredentials();
-    vTaskDelay(100 / portTICK_PERIOD_MS);
 
     if (!success) {
         Serial.println("Failed to load Bambu credentials");
@@ -617,11 +620,11 @@ bool setupMqtt() {
 
         // Verbinden mit dem MQTT-Server
         bool connected = true;
-        if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) 
+        String clientId = String(bambu_serialnr) + "_" + String(random(0, 100));
+        if (client.connect(clientId.c_str(), bambu_username, bambu_accesscode)) 
         {
             client.setCallback(mqtt_callback);
             client.setBufferSize(5120);
-            // Optional: Topic abonnieren
             client.subscribe(report_topic.c_str());
             //client.subscribe(request_topic.c_str());
             Serial.println("MQTT-Client initialisiert");
@@ -633,7 +636,7 @@ bool setupMqtt() {
             xTaskCreatePinnedToCore(
                 mqtt_loop, /* Function to implement the task */
                 "BambuMqtt", /* Name of the task */
-                8192,  /* Stack size in words */
+                10240,  /* Stack size in words */
                 NULL,  /* Task input parameter */
                 mqttTaskPrio,  /* Priority of the task */
                 &BambuMqttTask,  /* Task handle. */
@@ -664,6 +667,7 @@ bool setupMqtt() {
 void bambu_restart() {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
+        delay(10);
     }
     setupMqtt();
 }

src/main.cpp

@@ -13,6 +13,9 @@
 #include "esp_task_wdt.h"
 #include "commonFS.h"
 
+bool mainTaskWasPaused = 0;
+uint8_t scaleTareCounter = 0;
+
 // ##### SETUP #####
 void setup() {
   Serial.begin(115200);
@@ -45,32 +48,14 @@ void setup() {
   // NFC Reader
   startNfc();
 
-  uint8_t scaleCalibrated = start_scale();
-  if (scaleCalibrated == 3) {
-    oledShowMessage("Scale not calibrated!");
-    for (uint16_t i = 0; i < 50000; i++) {
-      yield();
-      vTaskDelay(pdMS_TO_TICKS(1));
-      esp_task_wdt_reset();
-    }
-  } else if (scaleCalibrated == 0) {
-    oledShowMessage("HX711 not found");
-    for (uint16_t i = 0; i < 50000; i++) {
-      yield();
-      vTaskDelay(pdMS_TO_TICKS(1));
-      esp_task_wdt_reset();
-    }
-  }
-  
+  start_scale();
+
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
-  esp_task_wdt_init(10, panic); 
+  esp_task_wdt_init(10, panic);
 
   // Aktuellen Task (loopTask) zum Watchdog hinzufügen
   esp_task_wdt_add(NULL);
-
-  // Optional: Andere Tasks zum Watchdog hinzufügen, falls nötig
-  // esp_task_wdt_add(task_handle);
 }
 
 
@@ -107,12 +92,19 @@ void loop() {
   unsigned long currentMillis = millis();
 
   // Überprüfe regelmäßig die WLAN-Verbindung
-  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) {
+  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) 
+  {
     checkWiFiConnection();
   }
 
   // Wenn Bambu auto set Spool aktiv
-  if (autoSendToBambu && autoSetToBambuSpoolId > 0) {
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0) 
+  {
+    if (!bambu_connected) 
+    {
+      bambu_restart();
+    }
+
     if (intervalElapsed(currentMillis, lastAutoSetBambuAmsTime, autoSetBambuAmsInterval)) 
     {
       if (hasReadRfidTag == 0)
@@ -147,9 +139,17 @@ void loop() {
   } 
 
   // Ausgabe der Waage auf Display
-  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0))
+  if(pauseMainTask == 0)
   {
-    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+    if (mainTaskWasPaused || (weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0)))
+    {
+      (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+    }
+    mainTaskWasPaused = false;
+  }
+  else
+  {
+    mainTaskWasPaused = true;
   }
 
 
@@ -159,13 +159,22 @@ void loop() {
     lastWeightReadTime = currentMillis;
 
     // Prüfen ob die Waage korrekt genullt ist
-    if ((weight > 0 && weight < 5) || weight < 0)
+    if ((weight > 0 && weight < 5) || weight < -1)
     {
-      scale_tare_counter++;
+      if(scaleTareCounter < 5)
+      {
+        scaleTareCounter++;
+      }
+      else
+      {
+        scaleTareRequest = true;
+        scaleTareCounter = 0;
+      }
+      
     }
     else
     {
-      scale_tare_counter = 0;
+      scaleTareCounter = 0;
     }
 
     // Prüfen ob das Gewicht gleich bleibt und dann senden
@@ -197,6 +206,11 @@ void loop() {
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
       autoSetToBambuSpoolId = spoolId.toInt();
+
+      if (octoEnabled) 
+      {
+        updateSpoolOcto(autoSetToBambuSpoolId);
+      }
     }
     else
     {
@@ -204,7 +218,6 @@ void loop() {
       vTaskDelay(2000 / portTICK_PERIOD_MS);
     }
   }
-
-  yield();
+  
   esp_task_wdt_reset();
 }

src/nfc.cpp

@@ -44,8 +44,6 @@ void payloadToJson(uint8_t *data) {
       DeserializationError error = deserializeJson(doc, jsonString);
   
       if (!error) {
-        const char* version = doc["version"];
-        const char* protocol = doc["protocol"];
         const char* color_hex = doc["color_hex"];
         const char* type = doc["type"];
         int min_temp = doc["min_temp"];
@@ -55,8 +53,6 @@ void payloadToJson(uint8_t *data) {
         Serial.println();
         Serial.println("-----------------");
         Serial.println("JSON-Parsed Data:");
-        Serial.println(version);
-        Serial.println(protocol);
         Serial.println(color_hex);
         Serial.println(type);
         Serial.println(min_temp);
@@ -93,8 +89,16 @@ bool formatNdefTag() {
     return success;
   }
 
+uint16_t readTagSize()
+{
+  uint8_t buffer[4];
+  memset(buffer, 0, 4);
+  nfc.ntag2xx_ReadPage(3, buffer);
+  return buffer[2]*8;
+}
+
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
+  uint16_t tagSize = readTagSize();
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
   uint8_t pageBuffer[4] = {0, 0, 0, 0};
@@ -136,6 +140,8 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
   if (combinedData == NULL) 
   {
     Serial.println("Fehler: Nicht genug Speicher vorhanden.");
+    oledShowMessage("Tag too small");
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
     return 0;
   }
 
@@ -369,46 +375,51 @@ void scanRfidTask(void * parameter) {
 
         if (uidLength == 7)
         {
-          uint8_t data[256];
-
-          // We probably have an NTAG2xx card (though it could be Ultralight as well)
-          Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
-          
-          for (uint8_t i = 0; i < 45; i++) {
-            /*
-            if (i < uidLength) {
-              uidString += String(uid[i], HEX);
-              if (i < uidLength - 1) {
-                  uidString += ":"; // Optional: Trennzeichen hinzufügen
-              }
-            }
-            */
-            if (!nfc.mifareclassic_ReadDataBlock(i, data + (i - 4) * 4)) 
-            {
-              break; // Stop if reading fails
-            }
-            // Check for NDEF message end
-            if (data[(i - 4) * 4] == 0xFE) 
-            {
-              break; // End of NDEF message
-            }
-
-            yield();
-            esp_task_wdt_reset();
-            vTaskDelay(pdMS_TO_TICKS(1));
-          }
-
-          if (!decodeNdefAndReturnJson(data)) 
+          uint16_t tagSize = readTagSize();
+          if(tagSize > 0)
           {
-            oledShowMessage("NFC-Tag unknown");
-            vTaskDelay(2000 / portTICK_PERIOD_MS);
+            // Create a buffer depending on the size of the tag
+            uint8_t* data = (uint8_t*)malloc(tagSize);
+            memset(data, 0, tagSize);
+
+            // We probably have an NTAG2xx card (though it could be Ultralight as well)
+            Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
+            
+            uint8_t numPages = readTagSize()/4;
+            for (uint8_t i = 4; i < 4+numPages; i++) {
+              if (!nfc.ntag2xx_ReadPage(i, data+(i-4) * 4))
+              {
+                break; // Stop if reading fails
+              }
+              // Check for NDEF message end
+              if (data[(i - 4) * 4] == 0xFE) 
+              {
+                break; // End of NDEF message
+              }
+
+              yield();
+              esp_task_wdt_reset();
+              vTaskDelay(pdMS_TO_TICKS(1));
+            }
+
+            if (!decodeNdefAndReturnJson(data)) 
+            {
+              oledShowMessage("NFC-Tag unknown");
+              vTaskDelay(2000 / portTICK_PERIOD_MS);
+              hasReadRfidTag = 2;
+            }
+            else 
+            {
+              hasReadRfidTag = 1;
+            }
+
+            free(data);
+          }
+          else
+          {
+            oledShowMessage("NFC-Tag read error");
             hasReadRfidTag = 2;
           }
-          else 
-          {
-            hasReadRfidTag = 1;
-          }
-         
         }
         else
         {

src/ota.cpp

@@ -14,6 +14,34 @@ static size_t updateTotalSize = 0;
 static size_t updateWritten = 0;
 static bool isSpiffsUpdate = false;
 
+/**
+ * Compares two version strings and determines if version1 is less than version2
+ * 
+ * @param version1 First version string (format: x.y.z)
+ * @param version2 Second version string (format: x.y.z)
+ * @return true if version1 is less than version2
+ */
+bool isVersionLessThan(const String& version1, const String& version2) {
+    int major1 = 0, minor1 = 0, patch1 = 0;
+    int major2 = 0, minor2 = 0, patch2 = 0;
+    
+    // Parse version1
+    sscanf(version1.c_str(), "%d.%d.%d", &major1, &minor1, &patch1);
+    
+    // Parse version2
+    sscanf(version2.c_str(), "%d.%d.%d", &major2, &minor2, &patch2);
+    
+    // Compare major version
+    if (major1 < major2) return true;
+    if (major1 > major2) return false;
+    
+    // Major versions equal, compare minor
+    if (minor1 < minor2) return true;
+    if (minor1 > minor2) return false;
+    
+    // Minor versions equal, compare patch
+    return patch1 < patch2;
+}
 
 void backupJsonConfigs() {
     // Bambu Credentials backup
@@ -111,6 +139,16 @@ void handleUpdate(AsyncWebServer &server) {
     updateHandler->setUri("/update");
     updateHandler->setMethod(HTTP_POST);
     
+    // Check if current version is less than defined TOOLVERSION before proceeding with update
+    if (isVersionLessThan(VERSION, TOOLDVERSION)) {
+        updateHandler->onRequest([](AsyncWebServerRequest *request) {
+            request->send(400, "application/json", 
+                "{\"success\":false,\"message\":\"Your current version is too old. Please perform a full upgrade.\"}");
+        });
+        server.addHandler(updateHandler);
+        return;
+    }
+
     updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
                              size_t index, uint8_t *data, size_t len, bool final) {
         if (!index) {

src/scale.cpp

@@ -14,7 +14,7 @@ TaskHandle_t ScaleTask;
 int16_t weight = 0;
 
 uint8_t weigthCouterToApi = 0;
-uint8_t scale_tare_counter = 0;
+bool scaleTareRequest = false;
 uint8_t pauseMainTask = 0;
 uint8_t scaleCalibrated = 1;
 
@@ -34,30 +34,32 @@ void scale_loop(void * parameter) {
   Serial.println("++++++++++++++++++++++++++++++");
   Serial.println("Scale Loop started");
   Serial.println("++++++++++++++++++++++++++++++");
+
   for(;;) {
     if (scale.is_ready()) 
     {
       // Waage nochmal Taren, wenn zu lange Abweichung
-      if (scale_tare_counter >= 5) 
+      if (scaleTareRequest == true) 
       {
+        Serial.println("Re-Tare scale");
         scale.tare();
-        scale_tare_counter = 0;
+        scaleTareRequest = false;
       }
 
       weight = round(scale.get_units());
     }
     
-    vTaskDelay(pdMS_TO_TICKS(100)); // Verzögerung, um die CPU nicht zu überlasten
+    vTaskDelay(pdMS_TO_TICKS(100));
   }
 }
 
-uint8_t start_scale() {
+void start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue;
+  float calibrationValue;
 
   // NVS lesen
   preferences.begin(NVS_NAMESPACE, true); // true = readonly
-  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
+  calibrationValue = preferences.getFloat(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
   preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
@@ -68,6 +70,13 @@ uint8_t start_scale() {
   if (isnan(calibrationValue) || calibrationValue < 1) {
     calibrationValue = defaultScaleCalibrationValue;
     scaleCalibrated = 0;
+
+    oledShowMessage("Scale not calibrated!");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
   }
 
   oledShowMessage("Scale Tare Please remove all");
@@ -90,7 +99,7 @@ uint8_t start_scale() {
   BaseType_t result = xTaskCreatePinnedToCore(
     scale_loop, /* Function to implement the task */
     "ScaleLoop", /* Name of the task */
-    10000,  /* Stack size in words */
+    2048,  /* Stack size in words */
     NULL,  /* Task input parameter */
     scaleTaskPrio,  /* Priority of the task */
     &ScaleTask,  /* Task handle. */
@@ -101,20 +110,21 @@ uint8_t start_scale() {
   } else {
       Serial.println("ScaleLoop-Task erfolgreich erstellt");
   }
-
-  return (scaleCalibrated == 1) ? 1 : 3;
 }
 
 uint8_t calibrate_scale() {
-  long newCalibrationValue;
+  uint8_t returnState = 0;
+  float newCalibrationValue;
+
+  vTaskSuspend(RfidReaderTask);
+  vTaskSuspend(ScaleTask);
 
-  //vTaskSuspend(RfidReaderTask);
-  vTaskDelete(RfidReaderTask);
   pauseBambuMqttTask = true;
   pauseMainTask = 1;
-
+  
   if (scale.wait_ready_timeout(1000))
   {
+    
     scale.set_scale();
     oledShowMessage("Step 1 empty Scale");
 
@@ -136,7 +146,7 @@ uint8_t calibrate_scale() {
       esp_task_wdt_reset();
     }
     
-    long newCalibrationValue = scale.get_units(10);
+    float newCalibrationValue = scale.get_units(10);
     Serial.print("Result: ");
     Serial.println(newCalibrationValue);
 
@@ -149,28 +159,33 @@ uint8_t calibrate_scale() {
 
       // Speichern mit NVS
       preferences.begin(NVS_NAMESPACE, false); // false = readwrite
-      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.putFloat(NVS_KEY_CALIBRATION, newCalibrationValue);
       preferences.end();
 
       // Verifizieren
       preferences.begin(NVS_NAMESPACE, true);
-      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      float verifyValue = preferences.getFloat(NVS_KEY_CALIBRATION, 0);
       preferences.end();
 
       Serial.print("Verified stored value: ");
       Serial.println(verifyValue);
 
-      Serial.println("End calibration, revome weight");
+      Serial.println("End calibration, remove weight");
 
       oledShowMessage("Remove weight");
 
+      scale.set_scale(newCalibrationValue);
       for (uint16_t i = 0; i < 2000; i++) {
         yield();
         vTaskDelay(pdMS_TO_TICKS(1));
         esp_task_wdt_reset();
       }
+      
+      oledShowMessage("Scale calibrated");
 
-      oledShowMessage("Calibration done");
+      // For some reason it is not possible to re-tare the scale here, it will result in a wdt timeout. Instead let the scale loop do the taring
+      //scale.tare();
+      scaleTareRequest = true;
 
       for (uint16_t i = 0; i < 2000; i++) {
         yield();
@@ -178,8 +193,9 @@ uint8_t calibrate_scale() {
         esp_task_wdt_reset();
       }
 
-      //ESP.restart();
+      returnState = 1;
     }
+   
     else
     {
       {
@@ -192,10 +208,10 @@ uint8_t calibrate_scale() {
           vTaskDelay(pdMS_TO_TICKS(1));
           esp_task_wdt_reset();
         }
-        return 0;
+        returnState = 0;
       }
-    }
-  } 
+    } 
+  }
   else 
   {
     Serial.println("HX711 not found.");
@@ -207,17 +223,13 @@ uint8_t calibrate_scale() {
       vTaskDelay(pdMS_TO_TICKS(1));
       esp_task_wdt_reset();
     }
-    return 0;
+    returnState = 0;
   }
 
-  oledShowMessage("Scale Ready");
-
-  
-  Serial.println("starte Scale Task");
-  start_scale();
-
+  vTaskResume(RfidReaderTask);
+  vTaskResume(ScaleTask);
   pauseBambuMqttTask = false;
   pauseMainTask = 0;
 
-  return 1;
+  return returnState;
 }

src/scale.h

@@ -12,7 +12,7 @@ uint8_t tareScale();
 extern HX711 scale;
 extern int16_t weight;
 extern uint8_t weigthCouterToApi;
-extern uint8_t scale_tare_counter;
+extern uint8_t scaleTareRequest;
 extern uint8_t pauseMainTask;
 extern uint8_t scaleCalibrated;
 

src/website.cpp

@@ -239,7 +239,10 @@ void setupWebserver(AsyncWebServer &server) {
     server.on("/spoolman", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman erhalten");
         String html = loadHtmlWithHeader("/spoolman.html");
-        html.replace("{{spoolmanUrl}}", spoolmanUrl);
+        html.replace("{{spoolmanUrl}}", (spoolmanUrl != "") ? spoolmanUrl : "");
+        html.replace("{{spoolmanOctoEnabled}}", octoEnabled ? "checked" : "");
+        html.replace("{{spoolmanOctoUrl}}", (octoUrl != "") ? octoUrl : "");
+        html.replace("{{spoolmanOctoToken}}", (octoToken != "") ? octoToken : "");
 
         JsonDocument doc;
         if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
@@ -277,16 +280,35 @@ void setupWebserver(AsyncWebServer &server) {
             return;
         }
 
+        if (request->getParam("octoEnabled")->value() == "true" && (!request->hasParam("octoUrl") || !request->hasParam("octoToken"))) {
+            request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing OctoPrint URL or Token parameter\"}");
+            return;
+        }
+
         String url = request->getParam("url")->value();
-        url.trim();
+        if (url.indexOf("http://") == -1 && url.indexOf("https://") == -1) {
+            url = "http://" + url;
+        }
+        // Remove trailing slash if exists
+        if (url.length() > 0 && url.charAt(url.length()-1) == '/') {
+            url = url.substring(0, url.length()-1);
+        }
         
-        bool healthy = saveSpoolmanUrl(url);
+        bool octoEnabled = (request->getParam("octoEnabled")->value() == "true") ? true : false;
+        String octoUrl = request->getParam("octoUrl")->value();
+        String octoToken = (request->getParam("octoToken")->value() != "") ? request->getParam("octoToken")->value() : "";
+
+        url.trim();
+        octoUrl.trim();
+        octoToken.trim();
+        
+        bool healthy = saveSpoolmanUrl(url, octoEnabled, octoUrl, octoToken);
         String jsonResponse = "{\"healthy\": " + String(healthy ? "true" : "false") + "}";
 
         request->send(200, "application/json", jsonResponse);
     });
 
-    // Route für das Überprüfen der Spoolman-Instanz
+    // Route für das Überprüfen der Bambu-Instanz
     server.on("/api/bambu", HTTP_GET, [](AsyncWebServerRequest *request){
         if (!request->hasParam("bambu_ip") || !request->hasParam("bambu_serialnr") || !request->hasParam("bambu_accesscode")) {
             request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing parameter\"}");

src/wlan.cpp

@@ -59,7 +59,7 @@ void initWiFi() {
   if(wm_nonblocking) wm.setConfigPortalBlocking(false);
   //wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
   wm.setWiFiAutoReconnect(true);
-  wm.setConnectTimeout(5);
+  wm.setConnectTimeout(10);
 
   oledShowTopRow();
   oledShowMessage("WiFi Setup");

usermod/spitzbirne32/Images/README.md

@@ -0,0 +1,12 @@
+## **Heat insert location**
+
+Housing: 
+- every hole is made to fit a heat insert
+![](./Housing_Heatinsert_Location_usermod_spitzbirne32_.png)
+
+---
+Scale top: 
+- two heat inserts for the NFC Reader
+![](./ScaleTop_Heatinsert_Location_usermod_spitzbirne32_.png)
+  
+

usermod/spitzbirne32/README.md

@@ -0,0 +1,69 @@
+## Modifications
+
+To reduce costs, components were sourced from AliExpress instead of Amazon. However, differences in dimensions and mounting hole spacing necessitated adjustments to the 3D-printed parts. Additionally M3 heat inserts were used to limit M4 screws to a minimum.
+![](./Images/Showcase_usermod_spitzbirne32.gif)
+---
+
+List of parts that were used:
+- Display: https://aliexpress.com/item/1005007389730469.html
+- Scale(5KG with HX711): https://aliexpress.com/item/1005006827930173.html
+- NFC Reader: https://aliexpress.com/item/1005005973913526.html
+- NFC Chips: https://aliexpress.com/item/1005006332360160.html
+- [VORON](https://vorondesign.com/) Heat Inserts M3 OD5mm L4mm: https://aliexpress.com/item/1005003582355741.html  - make sure to select the correct size
+
+---
+
+- **Parts are designed to be printed in ABS/ASA.** Shrinking compensation not needed.
+
+- **Display and Scale Adjustments:** The AliExpress-sourced display and scale had different dimensions and hole spacings compared to the Amazon versions. The 3D models were modified to accommodate these differences, ensuring proper fit and functionality.
+   -  measurement of my Display & Scale to check if your parts will fit can be found in the images folder
+
+- **Screw Size and Heat Inserts:** All holes originally designed for M4 screws were resized to fit M3 screws. Standard VORON heat inserts were incorporated to provide durable threading. This change standardizes the hardware and simplifies assembly.
+
+- **Display Mounting:** The display is now mounted using M3 screws with VORON heat inserts. The display's mounting holes need to be drilled to 3mm to accommodate the M3 screws.
+
+- **Scale Top Surface:** The top surface of the scale was modified to allow M3 socket head cap screws to sit flush with the 3D-printed part. This design ensures that the filament spool rests flat without interference.
+
+- **NFC Reader Mounting:** The NFC reader is also secured using M3 screws and VORON heat inserts, maintaining consistency across all components.
+
+- **Scale Base Mounting:** The only M4 screws required are for attaching the metal part of the scale to its base.
+
+## Benefits of Modifications
+
+- **Cost Reduction:** Sourcing components from AliExpress offers a more affordable alternative to Amazon, making the project more accessible.
+
+- **Standardized Hardware:** Using M3 screws and [VORON](https://vorondesign.com/) heat inserts throughout the assembly simplifies the build process and reduces the variety of required hardware.
+
+- **Enhanced Compatibility:** Adjustments to the 3D models ensure compatibility with readily available components, accommodating variations in part dimensions.
+
+## Assembly Instructions
+
+1. **Component Preparation:**
+   - Carefully drill the display's mounting holes to 3mm to fit M3 screws.
+
+2. **Heat Insert Installation:**
+   - install VORON M3 heat inserts into the designated holes in the 3D-printed housing/case for the ESP32 and Scale top → [heat insert location pictures](./Images/README.md)
+
+3. **Component Mounting:**
+   - Attach the display, scale, and NFC reader to their respective mounts using M3 screws.
+   - Secure the metal part of the scale to its base using M4 screws.
+
+4. **Final Assembly:**
+   - Assemble all components according to the original FilaMan instructions, ensuring that all modified parts fit correctly and function as intended.
+
+For detailed assembly guides and additional resources, refer to the [original FilaMan documentation](https://github.com/ManuelW77/Filaman).
+
+## Conclusion
+
+These modifications to the FilaMan project provide a cost-effective and standardized approach to building a filament management system. By sourcing components from AliExpress and adjusting the 3D models accordingly, users can achieve the same functionality at a reduced cost, with the added benefit of using uniform hardware throughout the assembly.
+
+## Changelog
+
+### Version 1.0 - 2025-03-04
+- Initial release of modifications for AliExpress-sourced components.
+- Adjusted 3D models to fit different display and scale dimensions.
+- Replaced M4 screws with M3 screws and integrated VORON heat inserts.
+- Modified display mounting, requiring drilling to 3mm for M3 screws.
+- Adjusted scale top surface for flush screw placement.
+- Standardized NFC reader mounting with M3 screws and VORON heat inserts.
+- Retained M4 screws only for metal scale attachment.