fix: enhance weight display logic for negative values

CHANGELOG.md

@@ -1,5 +1,18 @@
 # Changelog
 
+## [1.3.92] - 2025-02-24
+### Changed
+- update webpages for version v1.3.92
+- remove commented-out code in setBambuSpool function
+- update installation instructions and formatting in README files
+
+### Fixed
+- configure CPU frequency settings in setup function only for testing
+- update comment to clarify NVS reading process
+- adjust weight display logic to handle cases for weight less than 2
+- update weight display logic to handle negative and specific weight cases
+
+
 ## [1.3.91] - 2025-02-23
 ### Added
 - update GitHub Actions workflow for FTP firmware upload with improved credential checks

README.de.md

@@ -71,14 +71,15 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK         | 14        |
-| PN532 MOSI        | 13        |
-| PN532 MISO        | 12        |
-| PN532 CS/SS       | 15        |
+| PN532 SDA         | 21        |
+| PN532 SCL         | 22        |
 
-Ich nutze die HSPI default PINs + IRQ und RESET am PN532
+**Achte darauf, dass am PN532 die DIP-Schalter auf I2C gestellt sind**
 
-![ESP32](./img/ESP32-SPI-Pins.png)
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software-Abhängigkeiten
 
@@ -105,21 +106,20 @@ Ich nutze die HSPI default PINs + IRQ und RESET am PN532
   - PN532 NFC Modul
   - Verbindungskabel
 
-### Schritt-für-Schritt Installation
-## Einfache Installation
-1. **Gehe auf https://www.filaman.app/installer.html
+## Schritt-für-Schritt Installation
+### Einfache Installation
+1. **Gehe auf [FilaMan Installer](https://www.filaman.app/installer.html)**
 
-2. **Stecke dein ESP an den Rechner und klicke Connect
+2. **Stecke dein ESP an den Rechner und klicke Connect**
 
-3. **Wähle dein Device Port und klicke Intall
+3. **Wähle dein Device Port und klicke Intall**
 
 4. **Ersteinrichtung:**
     - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
     - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
     - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
 
-## Compile by yourself
-
+### Compile by yourself
 1. **Repository klonen:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

README.md

@@ -75,14 +75,15 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK  	    | 14        |
-| PN532 MOSI    	| 13        |
-| PN532 MISO       	| 12        |
-| PN532 CS/SS       | 15        |
+| PN532 SDA         | 21        |
+| PN532 SCL         | 22        |
 
-I use the HSPI default PINs + IRQ and RESET at the PN532
+**Make sure that the DIP switches on the PN532 are set to I2C**
 
-![ESP32](./img/ESP32-SPI-Pins.png)
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software Dependencies
 
@@ -95,9 +96,9 @@ I use the HSPI default PINs + IRQ and RESET at the PN532
 - `Adafruit_SSD1306`: OLED display control
 - `HX711`: Load cell communication
 
-## Installation
+### Installation
 
-### Prerequisites
+## Prerequisites
 - **Software:**
   - [PlatformIO](https://platformio.org/) in VS Code
   - [Spoolman](https://github.com/Donkie/Spoolman) instance
@@ -109,20 +110,20 @@ I use the HSPI default PINs + IRQ and RESET at the PN532
   - PN532 NFC Module
   - Connecting wires
 
-### Step-by-Step Installation
-## Easy Installation
-1. **Go to https://www.filaman.app/installer.html
+## Step-by-Step Installation
+### Easy Installation
+1. **Go to [FilaMan Installer](https://www.filaman.app/installer.html)**
 
-2. **Plug you device in and push Connect button
+2. **Plug you device in and push Connect button**
 
-3. **Select your Device Port and push Intall
+3. **Select your Device Port and push Intall**
 
 4. **Initial Setup:**
     - Connect to the "FilaMan" WiFi access point.
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
-## Compile by yourself
+### Compile by yourself
 1. **Clone the Repository:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

html/bambu_filaments.json

@@ -1,7 +1,31 @@
 {
-    "GFU99": "Generic TPU",
-    "GFN99": "Generic PA",
-    "GFN98": "Generic PA-CF",
+    "GFU99": "TPU",
+    "GFN99": "PA",
+    "GFN98": "PA-CF",
+    "GFL99": "PLA",
+    "GFL96": "PLA Silk",
+    "GFL98": "PLA-CF",
+    "GFL95": "PLA High Speed",
+    "GFG99": "PETG",
+    "GFG98": "PETG-CF",
+    "GFG97": "PCTG",
+    "GFB99": "ABS",
+    "GFC99": "PC",
+    "GFB98": "ASA",
+    "GFS99": "PVA",
+    "GFS98": "HIPS",
+    "GFT98": "PPS-CF",
+    "GFT97": "PPS",
+    "GFN97": "PPA-CF",
+    "GFN96": "PPA-GF",
+    "GFP99": "PE",
+    "GFP98": "PE-CF",
+    "GFP97": "PP",
+    "GFP96": "PP-CF",
+    "GFP95": "PP-GF",
+    "GFR99": "EVA",
+    "GFR98": "PHA",
+    "GFS97": "BVOH",
     "GFA01": "Bambu PLA Matte",
     "GFA00": "Bambu PLA Basic",
     "GFA09": "Bambu PLA Tough",
@@ -13,15 +37,11 @@
     "GFL03": "eSUN PLA+",
     "GFL01": "PolyTerra PLA",
     "GFL00": "PolyLite PLA",
-    "GFL99": "Generic PLA",
-    "GFL96": "Generic PLA Silk",
-    "GFL98": "Generic PLA-CF",
     "GFA50": "Bambu PLA-CF",
     "GFS02": "Bambu Support For PLA",
     "GFA11": "Bambu PLA Aero",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
-    "GFL95": "Generic PLA High Speed",
     "GFA12": "Bambu PLA Glow",
     "GFA13": "Bambu PLA Dynamic",
     "GFA15": "Bambu PLA Galaxy",
@@ -30,41 +50,21 @@
     "GFU00": "Bambu TPU 95A HF",
     "GFG00": "Bambu PETG Basic",
     "GFT01": "Bambu PET-CF",
-    "GFG99": "Generic PETG",
-    "GFG98": "Generic PETG-CF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
     "GFG01": "Bambu PETG Translucent",
-    "GFG97": "Generic PCTG",
     "GFB00": "Bambu ABS",
-    "GFB99": "Generic ABS",
     "GFB60": "PolyLite ABS",
     "GFB50": "Bambu ABS-GF",
     "GFC00": "Bambu PC",
-    "GFC99": "Generic PC",
-    "GFB98": "Generic ASA",
     "GFB01": "Bambu ASA",
     "GFB61": "PolyLite ASA",
     "GFB02": "Bambu ASA-Aero",
-    "GFS99": "Generic PVA",
     "GFS04": "Bambu PVA",
     "GFS01": "Bambu Support G",
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFS03": "Bambu Support For PA/PET",
     "GFN05": "Bambu PA6-CF",
-    "GFN08": "Bambu PA6-GF",
-    "GFS98": "Generic HIPS",
-    "GFT98": "Generic PPS-CF",
-    "GFT97": "Generic PPS",
-    "GFN97": "Generic PPA-CF",
-    "GFN96": "Generic PPA-GF",
-    "GFP99": "Generic PE",
-    "GFP98": "Generic PE-CF",
-    "GFP97": "Generic PP",
-    "GFP96": "Generic PP-CF",
-    "GFP95": "Generic PP-GF",
-    "GFR99": "Generic EVA",
-    "GFR98": "Generic PHA",
-    "GFS97": "Generic BVOH"
+    "GFN08": "Bambu PA6-GF"
 }

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.3.91"
+version = "1.3.92"
 ##
 [env:esp32dev]
 platform = espressif32

src/bambu.cpp

@@ -81,19 +81,23 @@ bool loadBambuCredentials() {
     return false;
 }
 
-String findFilamentIdx(String brand, String type) {
+struct FilamentResult {
+    String key;
+    String type;
+};
+
+FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
     // Laden der bambu_filaments.json
     if (!loadJsonValue("/bambu_filaments.json", doc)) {
         Serial.println("Fehler beim Laden der Filament-Daten");
-        return "GFL99"; // Fallback auf Generic PLA
+        return {"GFL99", "PLA"}; // Fallback auf Generic PLA
     }
 
+    // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
     String searchKey;
-    
-    // 1. Suche nach Brand + Type Kombination
     if (brand == "Bambu" || brand == "Bambulab") {
         searchKey = "Bambu " + type;
     } else if (brand == "PolyLite") {
@@ -109,20 +113,43 @@ String findFilamentIdx(String brand, String type) {
     // Durchsuche alle Einträge nach der Brand + Type Kombination
     for (JsonPair kv : doc.as<JsonObject>()) {
         if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+            return {kv.key().c_str(), kv.value().as<String>()};
         }
     }
 
-    // 2. Wenn nicht gefunden, suche nach Generic + Type
-    searchKey = "Generic " + type;
+    // 2. Wenn nicht gefunden, zerlege den type String in Wörter und suche nach jedem Wort
+    // Sammle alle vorhandenen Filamenttypen aus der JSON
+    std::vector<String> knownTypes;
     for (JsonPair kv : doc.as<JsonObject>()) {
-        if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+        String value = kv.value().as<String>();
+        // Extrahiere den Typ ohne Markennamen
+        if (value.indexOf(" ") != -1) {
+            value = value.substring(value.indexOf(" ") + 1);
+        }
+        if (!value.isEmpty()) {
+            knownTypes.push_back(value);
+        }
+    }
+
+    // Zerlege den Input-Type in Wörter
+    String typeStr = type;
+    typeStr.trim();
+    
+    // Durchsuche für jedes bekannte Filament, ob es im Input vorkommt
+    for (const String& knownType : knownTypes) {
+        if (typeStr.indexOf(knownType) != -1) {
+            // Suche nach diesem Typ in der Original-JSON
+            for (JsonPair kv : doc.as<JsonObject>()) {
+                String value = kv.value().as<String>();
+                if (value.indexOf(knownType) != -1) {
+                    return {kv.key().c_str(), knownType};
+                }
+            }
         }
     }
 
     // 3. Wenn immer noch nichts gefunden, gebe GFL99 zurück (Generic PLA)
-    return "GFL99";
+    return {"GFL99", "PLA"};
 }
 
 bool sendMqttMessage(String payload) {
@@ -156,15 +183,22 @@ bool setBambuSpool(String payload) {
     int minTemp = doc["nozzle_temp_min"];
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
+    (type == "PLA+") ? type = "PLA" : type;
     String brand = doc["brand"].as<String>();
     String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
-    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    if (tray_info_idx == "") {
+        if (brand != "" && type != "") {
+            FilamentResult result = findFilamentIdx(brand, type);
+            tray_info_idx = result.key;
+            type = result.type;  // Aktualisiere den type mit dem gefundenen Basistyp
+        }
+    }
     String setting_id = doc["bambu_setting_id"].as<String>();
     String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
-    doc["print"]["sequence_id"] = 0;
+    doc["print"]["sequence_id"] = "0";
     doc["print"]["command"] = "ams_filament_setting";
     doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
     doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
@@ -172,10 +206,10 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
+    //doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
     doc["print"]["setting_id"] = setting_id;
-
+    
     // Serialize the JSON
     String output;
     serializeJson(doc, output);
@@ -194,13 +228,13 @@ bool setBambuSpool(String payload) {
 
     if (cali_idx != "") {
         yield();
-        doc["print"]["sequence_id"] = 0;
+        doc["print"]["sequence_id"] = "0";
         doc["print"]["command"] = "extrusion_cali_sel";
         doc["print"]["filament_id"] = tray_info_idx;
         doc["print"]["nozzle_diameter"] = "0.4";
         doc["print"]["cali_idx"] = cali_idx.toInt();
         doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        //doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
 
         // Serialize the JSON
         String output;
@@ -218,37 +252,6 @@ bool setBambuSpool(String payload) {
         doc.clear();
         yield();
     }
-/*
-    if (setting_id != "") {
-        yield();
-        doc["print"]["sequence_id"] = 0;
-        doc["print"]["command"] = "ams_filament_setting";
-        doc["print"]["nozzle_temp_min"] = minTemp;
-        doc["print"]["nozzle_temp_max"] = maxTemp;
-        doc["print"]["setting_id"] = setting_id;
-        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
-        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["tray_info_idx"] = tray_info_idx;
-        doc["print"]["tray_type"] = type;
-
-        // Serialize the JSON
-        String output;
-        serializeJson(doc, output);
-
-        if (sendMqttMessage(output)) {
-            Serial.println("Filament Setting successfully set");
-        }
-        else
-        {
-            Serial.println("Failed to set Filament setting");
-            return false;
-        }
-
-        doc.clear();
-        yield();
-    }
-*/
 
     return true;
 }
@@ -256,6 +259,7 @@ bool setBambuSpool(String payload) {
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
+
     for (int i = 0; i < length; i++) {
         message += (char)payload[i];
     }
@@ -270,9 +274,9 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     }
 
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<String>()) {
+    if (doc["print"]["upgrade_state"].is<JsonObject>()) {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"]["ams"].is<String>() || !doc["print"]["ams"]["ams"].is<String>()) {
+        if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) {
             return;
         }
 
@@ -315,7 +319,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"]["vt_tray"].is<String>()) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +367,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"]["vt_tray"].is<String>()) {
+        if (doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -374,8 +378,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
             ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
             ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
-            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+
+            if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
+            {
+                ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+                ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            }
             ams_count++;  // Erhöhe ams_count für die externe Spule
         }
 
@@ -415,7 +423,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         int amsId = doc["print"]["ams_id"].as<int>();
         int trayId = doc["print"]["tray_id"].as<int>();
         String settingId = doc["print"]["setting_id"].as<String>();
-        
+
         // Finde das entsprechende AMS und Tray
         for (int i = 0; i < ams_count; i++) {
             if (ams_data[i].ams_id == amsId) {

src/main.cpp

@@ -122,7 +122,7 @@ void loop() {
   // Ausgabe der Waage auf Display
   if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
   {
-    (weight < 0) ? oledShowMessage("!! -1") : oledShowWeight(weight);
+    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
   }
 
 

src/scale.cpp

@@ -55,7 +55,7 @@ uint8_t start_scale() {
   Serial.println("Prüfe Calibration Value");
   long calibrationValue;
 
-  // NVS
+  // NVS lesen
   preferences.begin(NVS_NAMESPACE, true); // true = readonly
   calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
   preferences.end();