docs: update changelog for version 1.2.66

.github/workflows/providers/build.yml

@@ -1,87 +0,0 @@
-name: Build Firmware
-
-on:
-  workflow_call:
-    outputs:
-      version:
-        description: "The version from the tag"
-        value: ${{ jobs.build.outputs.version }}
-      changelog:
-        description: "The changelog for the current version"
-        value: ${{ jobs.build.outputs.changelog }}
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.get_version.outputs.VERSION }}
-      changelog: ${{ steps.changelog.outputs.CHANGES }}
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio
-    
-    - name: Build Firmware
-      run: |
-        pio run -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
-        
-    - name: Install esptool
-      run: |
-        pip install esptool
-        
-    - name: Merge firmware and SPIFFS
-      run: |
-        esptool.py --chip esp32 merge_bin \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-
-    - name: Prepare OTA firmware
-      run: |
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: |
-        if [ -n "$GITEA_REF" ]; then
-          echo "VERSION=${GITEA_REF#refs/tags/v}" >> $GITEA_OUTPUT
-        else
-          echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-        fi
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        if [ -n "$GITEA_OUTPUT" ]; then
-          echo "CHANGES<<EOF" >> $GITEA_OUTPUT
-          echo "$CHANGELOG" >> $GITEA_OUTPUT
-          echo "EOF" >> $GITEA_OUTPUT
-        else
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "$CHANGELOG" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v3
-      with:
-        name: firmware
-        path: |
-          .pio/build/esp32dev/filaman_full.bin
-          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/gitea-release.yml

@@ -64,21 +64,38 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
         
         cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
 
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=$(echo "${{ inputs.gitea_ref_name }}" | sed 's/^v//')
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/ {p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+        echo "CHANGELOG CONTENT:"
+        echo "$CHANGELOG"
+        if [ -z "$CHANGELOG" ]; then
+          echo "No changelog found for version $VERSION"
+          exit 1
+        fi
+
     - name: Create Release
       env:
         TOKEN: ${{ secrets.GITEA_TOKEN }}
         GITEA_REF_NAME: ${{ inputs.gitea_ref_name }}
         GITEA_SERVER_URL: ${{ inputs.gitea_server_url }}
         GITEA_REPOSITORY: ${{ inputs.gitea_repository }}
+        CHANGELOG: ${{ steps.changelog.outputs.CHANGES }}
       run: |
         echo "Debug environment:"
         echo "GITEA_REF_NAME: ${GITEA_REF_NAME}"
         echo "GITEA_SERVER_URL: ${GITEA_SERVER_URL}"
         echo "GITEA_REPOSITORY: ${GITEA_REPOSITORY}"
+        echo "CHANGELOG: ${CHANGELOG}"
         
         TAG="${GITEA_REF_NAME}"
         API_URL="${GITEA_SERVER_URL}/api/v1"
@@ -91,12 +108,13 @@ jobs:
           -X POST \
           -H "Authorization: token ${TOKEN}" \
           -H "Content-Type: application/json" \
-          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\"}" \
+          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\",\"body\":\"${CHANGELOG}\"}" \
           "${API_URL}/repos/${REPO}/releases")
         
         RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
+        UPLOAD_URL=$(echo "$RESPONSE" | grep -o '"upload_url":"[^"]*' | cut -d':' -f2- | tr -d '"')
         
-        if [ -n "$RELEASE_ID"; then
+        if [ -n "$RELEASE_ID" ]; then
           echo "Release created with ID: $RELEASE_ID"
           
           # Upload files
@@ -107,7 +125,7 @@ jobs:
               -H "Authorization: token ${TOKEN}" \
               -H "Content-Type: application/octet-stream" \
               --data-binary "@.pio/build/esp32dev/$file" \
-              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
+              "${UPLOAD_URL}?name=$file"
           done
         else
           echo "Failed to create release. Response:"

.github/workflows/providers/github-release.yml

@@ -40,7 +40,7 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
 
     - name: Prepare OTA firmware
       run: |

.github/workflows/release.yml

@@ -10,42 +10,21 @@ jobs:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
-      gitea_ref_name: ${{ steps.route_vars.outputs.ref_name }}
-      gitea_server_url: ${{ steps.route_vars.outputs.server_url }}
-      gitea_repository: ${{ steps.route_vars.outputs.repository }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
       - name: Checkout Repository
         uses: actions/checkout@v3
 
       - name: Debug Environment
-        id: route_vars
         run: |
           echo "CI Environment Details:"
           echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
           echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
           echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
           echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
-          echo "GITEA_REF_NAME=${GITEA_REF_NAME:-not set}"
           echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
-          
-          # Set outputs for Gitea variables
-          if [ -n "${GITEA_REF_NAME}" ]; then
-            echo "ref_name=${GITEA_REF_NAME}" >> "$GITHUB_OUTPUT"
-          else 
-            echo "ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
-          fi
-          
-          if [ -n "${GITEA_SERVER_URL}" ]; then
-            echo "server_url=${GITEA_SERVER_URL}" >> "$GITHUB_OUTPUT"
-          else
-            echo "server_url=https://gitea.example.com" >> "$GITHUB_OUTPUT"
-          fi
-          
-          if [ -n "${GITEA_REPOSITORY}" ]; then
-            echo "repository=${GITEA_REPOSITORY}" >> "$GITHUB_OUTPUT"
-          else
-            echo "repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
-          fi
 
       - name: Determine CI Provider
         id: provider
@@ -53,15 +32,14 @@ jobs:
         run: |
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
             echo "provider=gitea" >> "$GITHUB_OUTPUT"
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
           elif [ "${GITHUB_ACTIONS}" = "true" ]; then
             echo "provider=github" >> "$GITHUB_OUTPUT"
           else
             echo "provider=unknown" >> "$GITHUB_OUTPUT"
           fi
-          
-          # Debug outputs
-          echo "Provider outputs:"
-          cat "$GITHUB_OUTPUT"
 
   verify-provider:
     needs: route
@@ -70,10 +48,6 @@ jobs:
       - name: Echo detected provider
         run: |
           echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
-          echo "Gitea Ref Name: ${{ needs.route.outputs.gitea_ref_name }}"
-          echo "Gitea Server URL: ${{ needs.route.outputs.gitea_server_url }}"
-          echo "Gitea Repository: ${{ needs.route.outputs.gitea_repository }}"
-          
           if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
             echo "::error::Failed to detect CI provider!"
             exit 1

CHANGELOG.md

@@ -1,5 +1,152 @@
 # Changelog
 
+## [1.2.66] - 2025-02-20
+### Added
+- enhance OTA upload to support SPIFFS updates
+
+### Changed
+- update webpages for version v1.2.66
+
+
+## [1.2.65] - 2025-02-20
+### Changed
+- update webpages for version v1.2.65
+
+
+## [1.2.64] - 2025-02-20
+### Changed
+- update webpages for version v1.2.64
+
+### Fixed
+- improve error handling in OTA upload process
+
+
+## [1.2.63] - 2025-02-20
+### Added
+- update version to 1.2.63
+
+### Changed
+- update webpages for version v1.2.63
+
+
+## [1.2.62] - 2025-02-20
+### Added
+- update version to 1.2.62
+
+### Changed
+- update webpages for version 1.2.62
+
+
+## [1.2.61] - 2025-02-20
+### Added
+- update version to 1.2.61 and enhance OTA update error handling
+
+### Changed
+- update webpages for version 1.2.61
+
+
+## [1.2.60] - 2025-02-20
+### Added
+- update version to 1.2.60 in platformio configuration
+
+### Changed
+- update webpages for version 1.2.60
+
+
+## [1.2.59] - 2025-02-20
+### Added
+- update version to 1.2.59 and enhance OTA upload handling
+
+### Changed
+- update webpages for version 1.2.59
+
+
+## [1.2.58] - 2025-02-20
+### Added
+- update version to 1.2.58 in HTML files and platformio configuration
+
+
+## [1.2.57] - 2025-02-20
+### Added
+- update version to 1.2.57 in platformio configuration
+
+### Fixed
+- update spiffs offset and sizes in firmware and partitions configuration
+
+
+## [1.2.56] - 2025-02-19
+### Added
+- update version to 1.2.56 and adjust firmware and partition settings
+
+### Changed
+- remove redundant comment from Gitea release workflow
+
+
+## [1.2.55] - 2025-02-19
+### Added
+- update version to 1.2.55 and adjust Gitea release workflow to remove 'v' prefix from version
+
+
+## [1.2.54] - 2025-02-19
+### Added
+- update version to 1.2.54 and add check for missing changelog in Gitea release workflow
+
+
+## [1.2.53] - 2025-02-19
+### Added
+- update version to 1.2.53 and enhance Gitea release workflow to handle missing changelog
+
+
+## [1.2.52] - 2025-02-19
+### Added
+- update version to 1.2.52 and improve Gitea release workflow output handling
+
+
+## [1.2.51] - 2025-02-19
+### Added
+- update version to 1.2.51 and add debug output in Gitea release workflow
+
+
+## [1.2.50] - 2025-02-19
+### Added
+- update version to 1.2.50 and remove obsolete build workflow
+
+
+## [1.2.49] - 2025-02-19
+### Added
+- update version to 1.2.49 and modify changelog reading in Gitea release workflow
+
+
+## [1.2.48] - 2025-02-19
+### Added
+- update version to 1.2.48 and modify changelog reading in release workflows
+
+
+## [1.2.47] - 2025-02-19
+### Added
+- update version to 1.2.47 and modify changelog reading in GitHub release workflow
+
+
+## [1.2.46] - 2025-02-19
+### Added
+- update Gitea release workflow to include changelog and increment version to 1.2.46
+
+
+## [1.2.45] - 2025-02-19
+### Added
+- update Gitea release workflow to use dynamic upload URL and increment version to 1.2.45
+
+
+## [1.2.44] - 2025-02-19
+### Added
+- update Gitea release workflow to include additional outputs and increment version to 1.2.44
+
+
+## [1.2.43] - 2025-02-19
+### Added
+- update Gitea release workflow by removing unnecessary outputs and increment version to 1.2.43
+
+
 ## [1.2.42] - 2025-02-19
 ### Added
 - update Gitea release workflow to include additional outputs and increment version to 1.2.42

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.66</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.42"
+version = "1.2.66"
 
 [env:esp32dev]
 platform = espressif32

src/ota.cpp

@@ -4,8 +4,17 @@
 #include <SPIFFS.h>
 #include "commonFS.h"
 
+// Magic byte patterns für verschiedene Image-Typen
+const uint8_t FIRMWARE_MAGIC = 0xE9;
+const uint8_t ESP_MAGIC = 0xE9;
+
 void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
     static size_t contentLength = 0;
+    static bool isFullImage = false;
+    static uint32_t currentOffset = 0;
+    static uint8_t *spiffsBuffer = nullptr;
+    static size_t spiffsSize = 0;
+    static const uint32_t SPIFFS_START = 0x310000;  // Standard SPIFFS start address in full.bin
     
     if (!index) {
         contentLength = request->contentLength();
@@ -16,30 +25,104 @@ void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t ind
             return;
         }
 
-        if (!Update.begin(contentLength)) {
-            Serial.printf("Not enough space: %u required\n", contentLength);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Not enough space available\"}");
+        // Prüfe Magic Byte für Image-Typ
+        if (data[0] == ESP_MAGIC) {
+            // Normales Firmware Image oder full.bin
+            isFullImage = (contentLength > 0x3D0000);
+            
+            if (!Update.begin(contentLength)) {
+                Serial.printf("Not enough space: %u required\n", contentLength);
+                request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Not enough space available\"}");
+                return;
+            }
+            
+            Serial.println(isFullImage ? "Full image update started" : "Firmware update started");
+            
+            if (isFullImage) {
+                // Allocate buffer for SPIFFS data if it's a full image
+                spiffsSize = 0x0F0000;  // Standard SPIFFS size
+                spiffsBuffer = (uint8_t*)malloc(spiffsSize);
+                if (!spiffsBuffer) {
+                    Serial.println("Failed to allocate SPIFFS buffer");
+                    request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Memory allocation failed\"}");
+                    return;
+                }
+            }
+        } else {
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid image format\"}");
             return;
         }
-        
-        Serial.println("Update started");
+        currentOffset = 0;
     }
-
+    
+    // Handle SPIFFS data collection for full image
+    if (isFullImage && spiffsBuffer) {
+        uint32_t spiffsOffset = currentOffset - SPIFFS_START;
+        if (currentOffset >= SPIFFS_START && spiffsOffset < spiffsSize) {
+            size_t copyLen = min(len, spiffsSize - spiffsOffset);
+            if (spiffsOffset + len > spiffsSize) {
+                copyLen = spiffsSize - spiffsOffset;
+            }
+            memcpy(spiffsBuffer + spiffsOffset, data, copyLen);
+        }
+    }
+    
+    // Schreibe Daten
     if (Update.write(data, len) != len) {
-        Update.printError(Serial);
-        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Error writing update\"}");
-        return;
+        String errorMsg = Update.errorString();
+        if (errorMsg != "No Error") {
+            Update.printError(Serial);
+            if (spiffsBuffer) free(spiffsBuffer);
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Error writing update: " + errorMsg + "\"}");
+            return;
+        }
     }
+    
+    currentOffset += len;
 
     if (final) {
         if (Update.end(true)) {
-            Serial.println("Update complete");
+            Serial.println("Firmware update complete");
+            
+            if (isFullImage && spiffsBuffer) {
+                Serial.println("Starting SPIFFS update");
+                if (!SPIFFS.begin(true)) {
+                    Serial.println("SPIFFS mount failed");
+                }
+                
+                // Update SPIFFS
+                if (Update.begin(spiffsSize, U_SPIFFS)) {
+                    if (Update.write(spiffsBuffer, spiffsSize) != spiffsSize) {
+                        Serial.println("SPIFFS Write Failed");
+                        free(spiffsBuffer);
+                        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"SPIFFS update failed\"}");
+                        return;
+                    }
+                    if (!Update.end(true)) {
+                        Serial.println("SPIFFS End Failed");
+                        free(spiffsBuffer);
+                        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"SPIFFS finish failed\"}");
+                        return;
+                    }
+                }
+                free(spiffsBuffer);
+                Serial.println("SPIFFS update complete");
+            }
+            
             request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
             delay(1000);
             ESP.restart();
         } else {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed\"}");
+            if (spiffsBuffer) free(spiffsBuffer);
+            String errorMsg = Update.errorString();
+            if (errorMsg != "No Error") {
+                Update.printError(Serial);
+                request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed: " + errorMsg + "\"}");
+            } else {
+                request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
+                delay(1000);
+                ESP.restart();
+            }
         }
     }
 }