docs: update changelog and header for version v1.3.98

fix: correct version number in HTML files and platformio.ini to v1.2.76
enhance: streamline OTA update handling by removing unnecessary magic byte checks

.github/workflows/gitea-release.yml

@@ -0,0 +1,208 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    secrets:
+      GITEA_TOKEN:
+        description: 'Token für Gitea API-Zugriff'
+        required: true
+
+    outputs:
+      version:
+        description: 'The version that was released'
+        value: ${{ jobs.create-release.outputs.version }}
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    outputs:
+      version: ${{ steps.get_version.outputs.VERSION }}
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Determine Gitea URL
+      id: gitea_url
+      run: |
+        echo "Debug Environment:"
+        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
+        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
+        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+        
+        # Set API URL based on environment
+        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+          GITEA_API_URL="${GITHUB_SERVER_URL}"
+          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
+          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
+        else
+          echo "Error: This workflow is only for Gitea"
+          exit 1
+        fi
+        
+        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
+        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
+        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
+
+    - name: Create Gitea Release
+      env:
+        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
+        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
+        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
+      run: |
+        # Debug Token (nur Länge ausgeben für Sicherheit)
+        echo "Debug: Token length: ${#GITEA_TOKEN}"
+        if [ -z "$GITEA_TOKEN" ]; then
+          echo "Error: GITEA_TOKEN is empty"
+          exit 1
+        fi
+
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Debug-Ausgaben
+        echo "Debug: API URL: ${GITEA_API_URL}"
+        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
+        
+        # Erstelle zuerst den Release ohne Dateien
+        echo "Debug: Creating release..."
+        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.release_notes.outputs.CHANGES }}\"}"
+        
+        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
+          -X POST \
+          -H "Authorization: token ${GITEA_TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "${RELEASE_DATA}" \
+          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
+        
+        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
+        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
+        
+        if [ "$RELEASE_STATUS" != "201" ]; then
+          echo "Error: Failed to create release"
+          echo "Response: $RELEASE_BODY"
+          exit 1
+        fi
+        
+        # Extrahiere die Release-ID aus der Antwort
+        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
+        
+        # Lade die Dateien einzeln hoch
+        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
+          if [ -f "$file" ]; then
+            echo "Debug: Uploading $file..."
+            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
+              -X POST \
+              -H "Authorization: token ${GITEA_TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary @"$file" \
+              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
+            
+            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
+            if [ "$UPLOAD_STATUS" != "201" ]; then
+              echo "Warning: Failed to upload $file"
+              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
+            else
+              echo "Successfully uploaded $file"
+            fi
+          fi
+        done

.github/workflows/github-release.yml

@@ -0,0 +1,185 @@
+name: GitHub Release
+
+on:
+  workflow_call:
+    secrets:
+      RELEASE_TOKEN:
+        description: 'GitHub token for release creation'
+        required: true
+
+permissions:
+  contents: write
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Always build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary (always)
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Create GitHub Release
+      env:
+        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Create release with available files
+        FILES_TO_UPLOAD=""
+        
+        # Always add firmware
+        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
+        fi
+        
+        # Add SPIFFS and full binary only if they exist
+        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
+        fi
+        
+        if [ -f "filaman_full_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
+        fi
+        
+        # Create release with available files
+        if [ -n "$FILES_TO_UPLOAD" ]; then
+          gh release create "v${VERSION}" \
+            --title "Release ${VERSION}" \
+            --notes "${{ steps.release_notes.outputs.CHANGES }}" \
+            $FILES_TO_UPLOAD
+        else
+          echo "Error: No files found to upload"
+          exit 1
+        fi
+
+    - name: Install lftp
+      run: sudo apt-get install -y lftp
+        
+    - name: Upload Firmware via FTP
+      if: success()
+      env:
+        FTP_PASSWORD: ${{ vars.FTP_PASSWORD }}
+        FTP_USER: ${{ vars.FTP_USER }}
+        FTP_HOST: ${{ vars.FTP_HOST }}
+        VERSION: ${{ steps.get_version.outputs.VERSION }}
+      run: |
+        echo "Environment variables:"
+        env | grep -E '^FTP_' | while read -r line; do
+          var_name=$(echo "$line" | cut -d= -f1)
+          var_value=$(echo "$line" | cut -d= -f2-)
+          echo "$var_name is $(if [ -n "$var_value" ]; then echo "set"; else echo "empty"; fi)"
+        done
+        
+        cd .pio/build/esp32dev
+        if [ -n "$FTP_USER" ] && [ -n "$FTP_PASSWORD" ] && [ -n "$FTP_HOST" ]; then
+          echo "All FTP credentials are present, attempting upload..."
+          lftp -c "set ssl:verify-certificate no; \
+                    set ftp:ssl-protect-data true; \
+                    set ftp:ssl-force true; \
+                    set ssl:check-hostname false; \
+                    set ftp:ssl-auth TLS; \
+                    open -u $FTP_USER,$FTP_PASSWORD $FTP_HOST; \
+                    put -O / filaman_full_${VERSION}.bin -o filaman_full.bin"
+        else
+          echo "Error: Some FTP credentials are missing"
+          exit 1
+        fi

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Create Release
+name: Release Workflow
 
 on:
   push:
@@ -6,72 +6,36 @@ on:
       - 'v*'
 
 permissions:
-  contents: write      # Required for creating releases
-  issues: read        # Required for reading changelog
-  pull-requests: read # Required for reading changelog
+  contents: write
 
 jobs:
-  build:
+  detect-provider:
     runs-on: ubuntu-latest
-    permissions:
-      contents: write # Required for creating releases at job level
+    outputs:
+      provider: ${{ steps.provider.outputs.provider }}
     steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio
-    
-    - name: Build Firmware
-      run: |
-        pio run -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
-        
-    - name: Install esptool
-      run: |
-        pip install esptool
-        
-    - name: Merge firmware and SPIFFS
-      run: |
-        esptool.py --chip esp32 merge_bin \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-    
-    - name: Install and Configure GitHub CLI
-      run: |
-        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
-        && sudo apt update \
-        && sudo apt install gh -y
-        
-    - name: Create Release with GitHub CLI
-      env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}  # Changed from GITHUB_TOKEN to GH_TOKEN
-      run: |
-        gh release create "${{ github.ref_name }}" \
-          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
-          --notes "${{ steps.changelog.outputs.CHANGES }}" \
-          ".pio/build/esp32dev/filaman.bin#filaman.bin"
+      - name: Determine CI Provider
+        id: provider
+        shell: bash
+        run: |
+          if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=github" >> "$GITHUB_OUTPUT"
+          fi
+
+  github-release:
+    needs: detect-provider
+    permissions:
+      contents: write
+    if: needs.detect-provider.outputs.provider == 'github'
+    uses: ./.github/workflows/github-release.yml
+    secrets:
+      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+  gitea-release:
+    needs: detect-provider
+    if: needs.detect-provider.outputs.provider == 'gitea'
+    uses: ./.github/workflows/gitea-release.yml
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

.vscode/settings.json

@@ -1,54 +0,0 @@
-{
-    "files.associations": {
-        "algorithm": "cpp",
-        "vector": "cpp",
-        "cmath": "cpp",
-        "array": "cpp",
-        "atomic": "cpp",
-        "*.tcc": "cpp",
-        "bitset": "cpp",
-        "cctype": "cpp",
-        "clocale": "cpp",
-        "cstdarg": "cpp",
-        "cstddef": "cpp",
-        "cstdint": "cpp",
-        "cstdio": "cpp",
-        "cstdlib": "cpp",
-        "cstring": "cpp",
-        "ctime": "cpp",
-        "cwchar": "cpp",
-        "cwctype": "cpp",
-        "deque": "cpp",
-        "unordered_map": "cpp",
-        "unordered_set": "cpp",
-        "exception": "cpp",
-        "functional": "cpp",
-        "iterator": "cpp",
-        "map": "cpp",
-        "memory": "cpp",
-        "memory_resource": "cpp",
-        "numeric": "cpp",
-        "optional": "cpp",
-        "random": "cpp",
-        "regex": "cpp",
-        "string": "cpp",
-        "string_view": "cpp",
-        "system_error": "cpp",
-        "tuple": "cpp",
-        "type_traits": "cpp",
-        "utility": "cpp",
-        "fstream": "cpp",
-        "initializer_list": "cpp",
-        "iomanip": "cpp",
-        "iosfwd": "cpp",
-        "istream": "cpp",
-        "limits": "cpp",
-        "new": "cpp",
-        "ostream": "cpp",
-        "sstream": "cpp",
-        "stdexcept": "cpp",
-        "streambuf": "cpp",
-        "cinttypes": "cpp",
-        "typeinfo": "cpp"
-    }
-}

README.de.md

@@ -6,10 +6,12 @@ Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/
 
 ![Scale](./img/scale_trans.png)
 
-Weitere Bilder finden Sie im [img Ordner](/img/)  
+Weitere Bilder finden Sie im [img Ordner](/img/)
 oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
 Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
 
+### Es gibt jetzt auch ein Wiki, dort sind nochmal alle Funktionen beschrieben: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
+
 ### ESP32 Hardware-Funktionen
 - **Gewichtsmessung:** Verwendung einer Wägezelle mit HX711-Verstärker für präzise Gewichtsverfolgung.
 - **NFC-Tag Lesen/Schreiben:** PN532-Modul zum Lesen und Schreiben von Filamentdaten auf NFC-Tags.
@@ -53,14 +55,14 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
+[Amazon Link](https://amzn.eu/d/06A0DLb)
+- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
+- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
+- **NFC Tags Ntag215:** RFID Tag
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |
@@ -71,10 +73,15 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK         | 14        |
-| PN532 MOSI        | 13        |
-| PN532 MISO        | 12        |
-| PN532 CS/SS       | 15        |
+| PN532 SDA         | 21        |
+| PN532 SCL         | 22        |
+
+**Achte darauf, dass am PN532 die DIP-Schalter auf I2C gestellt sind**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software-Abhängigkeiten
 
@@ -101,7 +108,31 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - PN532 NFC Modul
   - Verbindungskabel
 
-### Schritt-für-Schritt Installation
+## Wichtiger Hinweis
+Du musst Spoolman auf DEBUG Modus setzten, da man bisher in Spoolman keine CORS Domains setzen kann!
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+## Schritt-für-Schritt Installation
+### Einfache Installation
+1. **Gehe auf [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Stecke dein ESP an den Rechner und klicke Connect**
+
+3. **Wähle dein Device Port und klicke Intall**
+
+4. **Ersteinrichtung:**
+    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
+    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
+    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
+
+### Compile by yourself
 1. **Repository klonen:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

README.md

@@ -13,6 +13,8 @@ More Images can be found in the [img Folder](/img/)
 or my website:[FilaMan Website](https://www.filaman.app)  
 german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
 
+### Now more detailed informations about the usage: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
+
 ### ESP32 Hardware Features
 - **Weight Measurement:** Using a load cell with HX711 amplifier for precise weight tracking.
 - **NFC Tag Reading/Writing:** PN532 module for reading and writing filament data to NFC tags.
@@ -56,14 +58,14 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC Module:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+- **HX711 5kg Load Cell Amplifier:** For weight measurement.
+[Amazon Link](https://amzn.eu/d/06A0DLb)
+- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
+- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
+- **NFC Tags Ntag215:** RFID Tag
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 
 ### Pin Configuration
@@ -75,10 +77,15 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK  	    | 14        |
-| PN532 MOSI    	| 13        |
-| PN532 MISO       	| 12        |
-| PN532 CS/SS       | 15        |
+| PN532 SDA         | 21        |
+| PN532 SCL         | 22        |
+
+**Make sure that the DIP switches on the PN532 are set to I2C**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software Dependencies
 
@@ -91,9 +98,9 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - `Adafruit_SSD1306`: OLED display control
 - `HX711`: Load cell communication
 
-## Installation
+### Installation
 
-### Prerequisites
+## Prerequisites
 - **Software:**
   - [PlatformIO](https://platformio.org/) in VS Code
   - [Spoolman](https://github.com/Donkie/Spoolman) instance
@@ -105,7 +112,32 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - PN532 NFC Module
   - Connecting wires
 
-### Step-by-Step Installation
+## Important Note
+You have to activate Spoolman in debug mode, because you are not able to set CORS Domains in Spoolman yet.
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+
+## Step-by-Step Installation
+### Easy Installation
+1. **Go to [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Plug you device in and push Connect button**
+
+3. **Select your Device Port and push Intall**
+
+4. **Initial Setup:**
+    - Connect to the "FilaMan" WiFi access point.
+    - Configure WiFi settings through the captive portal.
+    - Access the web interface at `http://filaman.local` or the IP address.
+
+### Compile by yourself
 1. **Clone the Repository:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git
@@ -124,7 +156,6 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
-
 ## Documentation
 
 ### Relevant Links

html/bambu_filaments.json

@@ -1,7 +1,31 @@
 {
-    "GFU99": "Generic TPU",
-    "GFN99": "Generic PA",
-    "GFN98": "Generic PA-CF",
+    "GFU99": "TPU",
+    "GFN99": "PA",
+    "GFN98": "PA-CF",
+    "GFL99": "PLA",
+    "GFL96": "PLA Silk",
+    "GFL98": "PLA-CF",
+    "GFL95": "PLA High Speed",
+    "GFG99": "PETG",
+    "GFG98": "PETG-CF",
+    "GFG97": "PCTG",
+    "GFB99": "ABS",
+    "GFC99": "PC",
+    "GFB98": "ASA",
+    "GFS99": "PVA",
+    "GFS98": "HIPS",
+    "GFT98": "PPS-CF",
+    "GFT97": "PPS",
+    "GFN97": "PPA-CF",
+    "GFN96": "PPA-GF",
+    "GFP99": "PE",
+    "GFP98": "PE-CF",
+    "GFP97": "PP",
+    "GFP96": "PP-CF",
+    "GFP95": "PP-GF",
+    "GFR99": "EVA",
+    "GFR98": "PHA",
+    "GFS97": "BVOH",
     "GFA01": "Bambu PLA Matte",
     "GFA00": "Bambu PLA Basic",
     "GFA09": "Bambu PLA Tough",
@@ -13,15 +37,11 @@
     "GFL03": "eSUN PLA+",
     "GFL01": "PolyTerra PLA",
     "GFL00": "PolyLite PLA",
-    "GFL99": "Generic PLA",
-    "GFL96": "Generic PLA Silk",
-    "GFL98": "Generic PLA-CF",
     "GFA50": "Bambu PLA-CF",
     "GFS02": "Bambu Support For PLA",
     "GFA11": "Bambu PLA Aero",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
-    "GFL95": "Generic PLA High Speed",
     "GFA12": "Bambu PLA Glow",
     "GFA13": "Bambu PLA Dynamic",
     "GFA15": "Bambu PLA Galaxy",
@@ -30,41 +50,21 @@
     "GFU00": "Bambu TPU 95A HF",
     "GFG00": "Bambu PETG Basic",
     "GFT01": "Bambu PET-CF",
-    "GFG99": "Generic PETG",
-    "GFG98": "Generic PETG-CF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
     "GFG01": "Bambu PETG Translucent",
-    "GFG97": "Generic PCTG",
     "GFB00": "Bambu ABS",
-    "GFB99": "Generic ABS",
     "GFB60": "PolyLite ABS",
     "GFB50": "Bambu ABS-GF",
     "GFC00": "Bambu PC",
-    "GFC99": "Generic PC",
-    "GFB98": "Generic ASA",
     "GFB01": "Bambu ASA",
     "GFB61": "PolyLite ASA",
     "GFB02": "Bambu ASA-Aero",
-    "GFS99": "Generic PVA",
     "GFS04": "Bambu PVA",
     "GFS01": "Bambu Support G",
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFS03": "Bambu Support For PA/PET",
     "GFN05": "Bambu PA6-CF",
-    "GFN08": "Bambu PA6-GF",
-    "GFS98": "Generic HIPS",
-    "GFT98": "Generic PPS-CF",
-    "GFT97": "Generic PPS",
-    "GFN97": "Generic PPA-CF",
-    "GFN96": "Generic PPA-GF",
-    "GFP99": "Generic PE",
-    "GFP98": "Generic PE-CF",
-    "GFP97": "Generic PP",
-    "GFP96": "Generic PP-CF",
-    "GFP95": "Generic PP-GF",
-    "GFR99": "Generic EVA",
-    "GFR98": "Generic PHA",
-    "GFS97": "Generic BVOH"
+    "GFN08": "Bambu PA6-GF"
 }

html/header.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">

html/index.html

@@ -1,4 +1,4 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">
@@ -33,9 +45,9 @@
         </div>
     </div>
 
+<!-- head -->
 
-
-    <div class="container">
+    <div class="content">
         <h1>FilaMan</h1>
         <p>Filament Management Tool</p>
         <p>Your smart solution for <strong>Filament Management</strong> in 3D printing.</p>
@@ -43,10 +55,11 @@
         <h2>About FilaMan</h2>
         <p>
             FilaMan is a tool designed to simplify filament spool management. It allows you to identify and weigh filament spools, 
-            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform, 
-            and ensure compatibility with <a href="https://github.com/spuder/OpenSpool" target="_blank">OpenSpool</a> for Bambu printers.
+            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform.
         </p>
 
+        <p>Get more information at <a href="https://www.filaman.app" target="_blank">https://www.filaman.app</a> and <a href="https://github.com/ManuelW77/Filaman" target="_blank">https://github.com/ManuelW77/Filaman</a>.</p>
+
         <div class="features">
             <div class="feature">
                 <h3>Spool Identification</h3>
@@ -61,12 +74,6 @@
                 <p>Works with OpenSpool to recognize and activate spools on Bambu printers.</p>
             </div>
         </div>
-
-        <h2>Future Plans</h2>
-        <p>
-            We are working on expanding compatibility to support smaller NFC tags like NTag213 
-            and developing custom software to enhance the OpenSpool experience.
-        </p>
     </div>
 </body>
 </html>

html/own_filaments.json

@@ -0,0 +1,31 @@
+{
+    "TPU": "GFU99",
+    "PA": "GFN99",
+    "PA-CF": "GFN98",
+    "PLA": "GFL99",
+    "PLA Silk": "GFL96",
+    "PLA-CF": "GFL98",
+    "PLA High Speed": "GFL95",
+    "PETG": "GFG99",
+    "PETG-CF": "GFG98",
+    "PCTG": "GFG97",
+    "ABS": "GFB99",
+    "ABS+HS": "GFB99",
+    "PC": "GFC99",
+    "PC/ABS": "GFC99",
+    "ASA": "GFB98",
+    "PVA": "GFS99",
+    "HIPS": "GFS98",
+    "PPS-CF": "GFT98",
+    "PPS": "GFT97",
+    "PPA-CF": "GFN97",
+    "PPA-GF": "GFN96",
+    "PE": "GFP99",
+    "PE-CF": "GFP98",
+    "PP": "GFP97",
+    "PP-CF": "GFP96",
+    "PP-GF": "GFP95",
+    "EVA": "GFR99",
+    "PHA": "GFR98",
+    "BVOH": "GFS97"
+}

html/rfid.html

@@ -1,4 +1,4 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">
@@ -33,6 +45,7 @@
         </div>
     </div>
 
+<!-- head -->
 
 <div class="connection-status hidden">
     <div class="spinner"></div>

html/rfid.js

@@ -150,6 +150,13 @@ function initWebSocket() {
                     ramStatus.textContent = `${data.freeHeap}k`;
                 }
             }
+            else if (data.type === 'setSpoolmanSettings') {
+                if (data.payload == 'success') {
+                    showNotification(`Spoolman Settings set successfully`, true);
+                } else {
+                    showNotification(`Error setting Spoolman Settings`, false);
+                }
+            }
         };
     } catch (error) {
         isConnected = false;
@@ -285,6 +292,14 @@ function displayAmsData(amsData) {
                     <img src="spool_in.png" alt="Spool In" style="width: 48px; height: 48px; transform: rotate(180deg) scaleX(-1);">
                 </button>`;
 
+            const spoolmanButtonHtml = `
+                <button class="spool-button" onclick="handleSpoolmanSettings('${tray.tray_info_idx}', '${tray.setting_id}', '${tray.cali_idx}', '${tray.nozzle_temp_min}', '${tray.nozzle_temp_max}')" 
+                        style="position: absolute; bottom: 0px; right: 0px; 
+                               background: none; border: none; padding: 0; 
+                               cursor: pointer; display: none;">
+                    <img src="set_spoolman.png" alt="Spool In" style="width: 38px; height: 38px;">
+                </button>`;
+
             if (!hasAnyContent) {
                 return `
                     <div class="tray">
@@ -348,6 +363,7 @@ function displayAmsData(amsData) {
                         ${trayDetails}
                         ${tempHTML}
                         ${(ams.ams_id === 255 && tray.tray_type !== '') ? outButtonHtml : ''}
+                        ${(tray.setting_id != "" && tray.setting_id != "null") ? spoolmanButtonHtml : ''}
                     </div>
                     
                 </div>`;
@@ -373,6 +389,36 @@ function updateSpoolButtons(show) {
     });
 }
 
+function handleSpoolmanSettings(tray_info_idx, setting_id, cali_idx, nozzle_temp_min, nozzle_temp_max) {
+    // Hole das ausgewählte Filament
+    const selectedText = document.getElementById("selected-filament").textContent;
+
+    // Finde die ausgewählte Spule in den Daten
+    const selectedSpool = spoolsData.find(spool => 
+        `${spool.id} | ${spool.filament.name} (${spool.filament.material})` === selectedText
+    );
+
+    const payload = {
+        type: 'setSpoolmanSettings',
+        payload: {
+            filament_id: selectedSpool.filament.id,
+            tray_info_idx: tray_info_idx,
+            setting_id: setting_id,
+            cali_idx: cali_idx,
+            temp_min: nozzle_temp_min,
+            temp_max: nozzle_temp_max
+        }
+    };
+
+    try {
+        socket.send(JSON.stringify(payload));
+        showNotification(`Setting send to Spoolman`, true);
+    } catch (error) {
+        console.error("Error while sending settings to Spoolman:", error);
+        showNotification("Error while sending!", false);
+    }
+}
+
 function handleSpoolOut() {
     // Erstelle Payload
     const payload = {

html/spoolman.html

@@ -1,4 +1,4 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">
@@ -33,6 +45,7 @@
         </div>
     </div>
 
+<!-- head -->
 
     <script>
         window.onload = function() {
@@ -61,8 +74,10 @@
             const ip = document.getElementById('bambuIp').value;
             const serial = document.getElementById('bambuSerial').value;
             const code = document.getElementById('bambuCode').value;
+            const autoSend = document.getElementById('autoSend').checked;
+            const autoSendTime = document.getElementById('autoSendTime').value;
 
-            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}`)
+            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}&autoSendTime=${autoSendTime}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -82,27 +97,47 @@
     
     <div class="content">
         <h1>Spoolman API URL / Bambu Credentials</h1>
-        <label for="spoolmanUrl">Set URL/IP to your Spoolman-Instanz:</label>
-        <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-        <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
-        <p id="statusMessage"></p>
 
-        <h2>Bambu Lab Printer Credentials</h2>
-        <div class="bambu-settings">
-            <div class="input-group">
-                <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
-                <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+        <div class="card">
+            <div class="card-body">
+                <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
+                <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
+                <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
+                <p id="statusMessage"></p>
             </div>
-            <div class="input-group">
-                <label for="bambuSerial">Drucker Seriennummer:</label>
-                <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+        </div>
+
+        <div class="card">
+            <div class="card-body">
+                <h5 class="card-title">Bambu Lab Printer Credentials</h5>
+                <div class="bambu-settings">
+                    <div class="input-group">
+                        <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
+                        <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuSerial">Drucker Seriennummer:</label>
+                        <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuCode">Access Code:</label>
+                        <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
+                    </div>
+                    <hr>
+                    <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
+                    <div class="input-group" style="display: flex; margin-bottom: 0;">
+                        <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
+                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait time in Seconds:</label>
+                    </div>
+                    <div class="input-group" style="display: flex;">
+                        <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
+                        <input type="text" id="autoSendTime" placeholder="Time to wait for new Spool" value="{{autoSendTime}}" style="width: 100px;">
+                    </div>
+
+                    <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>
+                    <p id="bambuStatusMessage"></p>
+                </div>
             </div>
-            <div class="input-group">
-                <label for="bambuCode">Access Code:</label>
-                <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
-            </div>
-            <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
-            <p id="bambuStatusMessage"></p>
         </div>
     </div>
 </body>

html/style.css

@@ -279,9 +279,10 @@ a:hover {
 
 /* Karten-Stil für optische Trennung */
 .card {
-    background: #f9f9f9;
+    background: var(--primary-color);
+    width: 500px;
     padding: 15px;
-    margin: 20px 0;
+    margin: 20px auto;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
 }
@@ -760,17 +761,19 @@ a:hover {
     right: 20px;
     padding: 15px 25px;
     border-radius: 4px;
-    color: white;
+    color: black;
     z-index: 1000;
     animation: slideIn 0.3s ease-out;
 }
 
 .notification.success {
     background-color: #28a745;
+    color: black !important;
 }
 
 .notification.error {
     background-color: #dc3545;
+    color: white !important;
 }
 
 .notification.fade-out {
@@ -959,7 +962,6 @@ input[type="submit"]:disabled,
 
 /* Bambu Settings Erweiterung */
 .bambu-settings {
-    background: white;
     padding: 20px;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
@@ -1013,4 +1015,141 @@ input[type="submit"]:disabled,
     color: #000;
     vertical-align: middle;
     margin-left: 0.5rem;
+    text-shadow: none !important;
+}
+
+.progress-container {
+    width: 100%;
+    margin: 20px 0;
+    display: none;
+    background: #f0f0f0;
+    border-radius: 4px;
+    overflow: hidden;
+}
+.progress-bar {
+    width: 0%;
+    height: 24px;
+    background-color: #4CAF50;
+    text-align: center;
+    line-height: 24px;
+    color: white;
+    transition: width 0.3s ease-in-out;
+    font-weight: bold;
+}
+.status {
+    margin: 10px 0;
+    padding: 15px;
+    border-radius: 4px;
+    display: none;
+}
+.error { 
+    background-color: #ffebee; 
+    color: #c62828; 
+    border: 1px solid #ef9a9a;
+}
+.success { 
+    background-color: #e8f5e9; 
+    color: #2e7d32; 
+    border: 1px solid #a5d6a7;
+}
+.update-form {
+    background: var(--primary-color);
+    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.05);
+    border: var(--glass-border);
+    padding: 20px;
+    border-radius: 8px;
+    margin: 0 auto;
+    width: 400px;
+    text-align: center;
+}
+.update-form input[type="file"] {
+    margin-bottom: 15px;
+    width: 80%;
+    padding: 8px;
+    border: 1px solid #ddd;
+    border-radius: 4px;
+    background-color: #4CAF50;
+}
+.update-form input[type="submit"] {
+    background-color: #4CAF50;
+    color: white;
+    padding: 10px 20px;
+    border: none;
+    border-radius: 4px;
+    cursor: pointer;
+    font-size: 16px;
+    transition: background-color 0.3s;
+}
+.update-form input[type="submit"]:hover {
+    background-color: #45a049;
+}
+.update-form input[type="submit"]:disabled {
+    background-color: #cccccc;
+    cursor: not-allowed;
+}
+.warning {
+    background-color: var(--primary-color);
+    border: 1px solid #ffe0b2;
+    margin: 20px auto;
+    border-radius: 4px;
+    max-width: 600px;
+    text-align: center;
+    color: #e65100;
+    padding: 15px;
+}
+
+.update-options {
+    display: flex;
+    gap: 2rem;
+    margin: 2rem 0;
+}
+.update-section {
+    flex: 1;
+    background: var(--background-green);
+    padding: 1.5rem;
+    border-radius: 8px;
+}
+.update-section h2 {
+    margin-top: 0;
+    color: #333;
+}
+.update-section p {
+    color: #666;
+    margin-bottom: 1rem;
+}
+.progress-container {
+    margin: 20px 0;
+    background: #f0f0f0;
+    border-radius: 4px;
+    overflow: hidden;
+}
+.progress-bar {
+    width: 0;
+    height: 20px;
+    background: #4CAF50;
+    transition: width 0.3s ease-in-out;
+    text-align: center;
+    line-height: 20px;
+    color: white;
+}
+.status {
+    margin-top: 20px;
+    padding: 10px;
+    border-radius: 4px;
+    display: none;
+}
+.status.success {
+    background: #e8f5e9;
+    color: #2e7d32;
+}
+.status.error {
+    background: #ffebee;
+    color: #c62828;
+}
+.warning {
+    background: #fff3e0;
+    color: #e65100;
+    padding: 15px;
+    border-radius: 4px;
+    margin-bottom: 20px;
 }

html/upgrade.html

@@ -0,0 +1,253 @@
+<!-- head --><!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version"></span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+<!-- head -->
+    
+    <div class="content">
+        <h1>Firmware Upgrade</h1>
+
+        <div class="warning">
+            <strong>Warning:</strong> Do not power off the device during update.
+        </div>
+
+        <div class="update-options">
+            <div class="update-section">
+                <h2>Firmware Update</h2>
+                <p>Upload a new firmware file (filaman_*.bin)</p>
+                <div class="update-form">
+                    <form id="firmwareForm" enctype='multipart/form-data' data-type="firmware">
+                        <input type='file' name='update' accept='.bin' required>
+                        <input type='submit' value='Start Firmware Update'>
+                    </form>
+                </div>
+            </div>
+
+            <div class="update-section">
+                <h2>Webpage Update</h2>
+                <p>Upload a new webpage file (webpage_*.bin)</p>
+                <div class="update-form">
+                    <form id="webpageForm" enctype='multipart/form-data' data-type="webpage">
+                        <input type='file' name='update' accept='.bin' required>
+                        <input type='submit' value='Start Webpage Update'>
+                    </form>
+                </div>
+            </div>
+        </div>
+
+        <div class="progress-container" style="display: none;">
+            <div class="progress-bar">0%</div>
+        </div>
+        <div class="status"></div>
+    </div>
+
+    <script>
+        // Hide status indicators during update
+        const statusContainer = document.querySelector('.status-container');
+        if (statusContainer) {
+            statusContainer.style.display = 'none';
+        }
+
+        const progress = document.querySelector('.progress-bar');
+        const progressContainer = document.querySelector('.progress-container');
+        const status = document.querySelector('.status');
+        let updateInProgress = false;
+        let lastReceivedProgress = 0;
+
+        // WebSocket Handling
+        let ws = null;
+        let wsReconnectTimer = null;
+
+        function connectWebSocket() {
+            ws = new WebSocket('ws://' + window.location.host + '/ws');
+            
+            ws.onmessage = function(event) {
+                try {
+                    const data = JSON.parse(event.data);
+                    if (data.type === "updateProgress" && updateInProgress) {
+                        // Zeige Fortschrittsbalken
+                        progressContainer.style.display = 'block';
+                        
+                        // Aktualisiere den Fortschritt nur wenn er größer ist
+                        const newProgress = parseInt(data.progress);
+                        if (!isNaN(newProgress) && newProgress >= lastReceivedProgress) {
+                            progress.style.width = newProgress + '%';
+                            progress.textContent = newProgress + '%';
+                            lastReceivedProgress = newProgress;
+                        }
+                        
+                        // Zeige Status-Nachricht
+                        if (data.message || data.status) {
+                            status.textContent = data.message || getStatusMessage(data.status);
+                            status.className = 'status success';
+                            status.style.display = 'block';
+                            
+                            // Starte Reload wenn Update erfolgreich
+                            if (data.status === 'success' || lastReceivedProgress >= 98) {
+                                clearTimeout(wsReconnectTimer);
+                                setTimeout(() => {
+                                    window.location.href = '/';
+                                }, 30000);
+                            }
+                        }
+                    }
+                } catch (e) {
+                    console.error('WebSocket message error:', e);
+                }
+            };
+
+            ws.onclose = function() {
+                if (updateInProgress) {
+                    // Wenn der Fortschritt hoch genug ist, gehen wir von einem erfolgreichen Update aus
+                    if (lastReceivedProgress >= 85) {
+                        status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                        status.className = 'status success';
+                        status.style.display = 'block';
+                        clearTimeout(wsReconnectTimer);
+                        setTimeout(() => {
+                            window.location.href = '/';
+                        }, 30000);
+                    } else {
+                        // Versuche Reconnect bei niedrigem Fortschritt
+                        wsReconnectTimer = setTimeout(connectWebSocket, 1000);
+                    }
+                }
+            };
+
+            ws.onerror = function(err) {
+                console.error('WebSocket error:', err);
+                if (updateInProgress && lastReceivedProgress >= 85) {
+                    status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                    status.className = 'status success';
+                    status.style.display = 'block';
+                    setTimeout(() => {
+                        window.location.href = '/';
+                    }, 30000);
+                }
+            };
+        }
+
+        // Initial WebSocket connection
+        connectWebSocket();
+
+        function getStatusMessage(status) {
+            switch(status) {
+                case 'starting': return 'Starting update...';
+                case 'uploading': return 'Uploading...';
+                case 'finalizing': return 'Finalizing update...';
+                case 'restoring': return 'Restoring configurations...';
+                case 'preparing': return 'Preparing for restart...';
+                case 'success': return 'Update successful! Device is restarting... Page will reload in 30 seconds.';
+                default: return 'Updating...';
+            }
+        }
+
+        function handleUpdate(e) {
+            e.preventDefault();
+            const form = e.target;
+            const file = form.update.files[0];
+            const updateType = form.dataset.type;
+            
+            if (!file) {
+                alert('Please select a file.');
+                return;
+            }
+            
+            // Validate file name pattern
+            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
+                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
+                return;
+            }
+            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
+                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
+                return;
+            }
+            
+            // Reset UI
+            updateInProgress = true;
+            progressContainer.style.display = 'block';
+            status.style.display = 'none';
+            status.className = 'status';
+            progress.style.width = '0%';
+            progress.textContent = '0%';
+            
+            // Disable submit buttons
+            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
+
+            // Send update
+            const xhr = new XMLHttpRequest();
+            xhr.open('POST', '/update', true);
+            
+            xhr.onload = function() {
+                if (xhr.status !== 200 && !progress.textContent.startsWith('100')) {
+                    status.textContent = "Update failed: " + (xhr.responseText || "Unknown error");
+                    status.className = 'status error';
+                    status.style.display = 'block';
+                    updateInProgress = false;
+                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                }
+            };
+            
+            xhr.onerror = function() {
+                if (!progress.textContent.startsWith('100')) {
+                    status.textContent = "Network error during update";
+                    status.className = 'status error';
+                    status.style.display = 'block';
+                    updateInProgress = false;
+                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                }
+            };
+
+            const formData = new FormData();
+            formData.append('update', file);
+            xhr.send(formData);
+        }
+
+        document.getElementById('firmwareForm').addEventListener('submit', handleUpdate);
+        document.getElementById('webpageForm').addEventListener('submit', handleUpdate);
+    </script>
+</body>
+</html>

html/waage.html

@@ -1,4 +1,4 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">
@@ -33,6 +45,7 @@
         </div>
     </div>
 
+<!-- head -->
 
     <div class="content">
         <h1>Scale Configuration Page</h1>

html/wifi.html

@@ -1,4 +1,4 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,6 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">
@@ -33,6 +45,7 @@
         </div>
     </div>
 
+<!-- head -->
 
     <div class="content">
         <h1>WiFi Configuration Page</h1>

partitions.csv

@@ -1,5 +1,6 @@
-# Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x5000,
-otadata,  data, ota,     0xe000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x280000,
-spiffs,   data, spiffs,  0x290000,0x170000,
+# Name,   Type, SubType,    Offset,   Size,     Flags
+nvs,      data, nvs,       0x9000,   0x5000,
+otadata,  data, ota,       0xe000,   0x2000,
+app0,     app,  ota_0,     0x10000,  0x1E0000,
+app1,     app,  ota_1,     0x1F0000, 0x1E0000,
+spiffs,   data, spiffs,    0x3D0000, 0x30000,

platformio.ini

@@ -9,8 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.0.7"
-
+version = "1.3.98"
+##
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -19,9 +19,11 @@ monitor_speed = 115200
 
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
-    #me-no-dev/ESP Async WebServer @ ^1.2.4
     https://github.com/me-no-dev/ESPAsyncWebServer.git#master
-    me-no-dev/AsyncTCP @ ^1.1.1
+    #me-no-dev/AsyncTCP @ ^1.1.1
+    https://github.com/esphome/AsyncTCP.git
+    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
+    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -31,23 +33,40 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-board_build.filesystem = spiffs
-board_build.spiffs.partition = 2M
-board_build.spiffs.upload_size = 2M
+#board_build.filesystem = spiffs
+board_build.filesystem = littlefs
+; Update partition settings
 board_build.partitions = partitions.csv
+board_upload.flash_size = 4MB
+board_build.flash_mode = dio
+board_upload.flash_freq = "40m"
 
 build_flags = 
     -Os
     -ffunction-sections
     -fdata-sections
-    -DNDEBUG
+    #-DNDEBUG
     -mtext-section-literals
-    '-D VERSION="${common.version}"'
-
+    -DVERSION=\"${common.version}\"
+    -DASYNCWEBSERVER_REGEX
+    #-DCORE_DEBUG_LEVEL=3
+    -DCONFIG_ARDUHAL_LOG_COLORS=1
+    #-DOTA_DEBUG=1
+    -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
+    -DBOOT_APP_PARTITION_OTA_0=1
+    -DCONFIG_LWIP_TCP_MSL=60000
+    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
+    
 extra_scripts = 
-    pre:scripts/combine_html.py
-    pre:scripts/pre_build.py
-    pre:scripts/pre_spiffs.py
-    pre:scripts/gzip_files.py
-    pre:scripts/extra_script.py
-    pre:scripts/update_changelog.py
+    scripts/extra_script.py
+    ${env:buildfs.extra_scripts}
+
+[env:buildfs]
+extra_scripts =
+    pre:scripts/combine_html.py  ; Combine header with HTML files
+    scripts/gzip_files.py       ; Compress files for SPIFFS
+
+[platformio]
+default_envs = esp32dev
+

scripts/combine_html.py

@@ -1,7 +1,10 @@
 Import("env")
 import os
+import re
 
 def combine_html_files(source, target, env):
+    print("COMBINE HTML FILES")
+    
     html_dir = "./html"
     header_file = os.path.join(html_dir, "header.html")
     
@@ -18,14 +21,14 @@ def combine_html_files(source, target, env):
             with open(file_path, 'r') as f:
                 content = f.read()
             
-            # Replace placeholder with header content
-            if '{{header}}' in content:
-                new_content = content.replace('{{header}}', header_content)
-                
-                # Write back combined content
-                with open(file_path, 'w') as f:
-                    f.write(new_content)
-                print(f"Combined header with {filename}")
+            # Replace content between head comments with header content
+            pattern = r'(<!-- head -->).*?(<!-- head -->)'
+            new_content = re.sub(pattern, r'\1' + header_content + r'\2', content, flags=re.DOTALL)
+            
+            # Write back combined content
+            with open(file_path, 'w') as f:
+                f.write(new_content)
+            print(f"Combined header with {filename}")
 
 # Register the script to run before building SPIFFS
 env.AddPreAction("buildfs", combine_html_files)

scripts/gzip_files.py

@@ -13,6 +13,9 @@ def copy_file(input_file, output_file):
     shutil.copy2(input_file, output_file)
 
 def should_compress(file):
+     # Skip compression for spoolman.html
+    if file == 'spoolman.html':
+        return False
     # Komprimiere nur bestimmte Dateitypen
     return file.endswith(('.js', '.png', '.css', '.html'))
 

scripts/pre_build.py

@@ -22,4 +22,4 @@ def replace_version(source, target, env):
     with open(header_file, 'w') as file:
         file.write(content)
 
-env.AddPreAction("buildfs", replace_version)
+env.AddPreAction("buildfs", replace_version)

scripts/pre_spiffs.py

@@ -1,7 +1,39 @@
 Import("env")
 
+board_config = env.BoardConfig()
+
+# Calculate SPIFFS size based on partition table
+SPIFFS_START = 0x310000  # From partitions.csv
+SPIFFS_SIZE = 0xE0000   # From partitions.csv
+SPIFFS_PAGE = 256
+SPIFFS_BLOCK = 4096
+
+env.Replace(
+    MKSPIFFSTOOL="mkspiffs",
+    SPIFFSBLOCKSZ=SPIFFS_BLOCK,
+    SPIFFSBLOCKSIZE=SPIFFS_BLOCK,
+    SPIFFSSTART=SPIFFS_START,
+    SPIFFSEND=SPIFFS_START + SPIFFS_SIZE,
+    SPIFFSPAGESZ=SPIFFS_PAGE,
+    SPIFFSSIZE=SPIFFS_SIZE
+)
+
 # Wiederverwendung der replace_version Funktion
 exec(open("./scripts/pre_build.py").read())
 
 # Bind to SPIFFS build
-env.AddPreAction("buildfs", replace_version)
+env.AddPreAction("buildfs", replace_version)
+
+import os
+import shutil
+from SCons.Script import DefaultEnvironment
+
+env = DefaultEnvironment()
+
+# Format SPIFFS partition before uploading new files
+spiffs_dir = os.path.join(env.subst("$BUILD_DIR"), "spiffs")
+if os.path.exists(spiffs_dir):
+    shutil.rmtree(spiffs_dir)
+os.makedirs(spiffs_dir)
+
+print("SPIFFS partition formatted.")

scripts/update_changelog.py

@@ -64,33 +64,10 @@ def get_changes_from_git():
     
     return changes
 
-def push_changes(version):
-    """Push changes to upstream"""
-    try:
-        # Stage the CHANGELOG.md
-        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
-        
-        # Commit the changelog
-        commit_msg = f"docs: update changelog for version {version}"
-        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
-        
-        # Push to origin (local)
-        subprocess.run(['git', 'push', 'origin'], check=True)
-        print("Successfully pushed to origin")
-        
-        # Ask for upstream push
-        response = input("Do you want to push to GitHub (upstream)? (y/n): ").lower()
-        if response == 'y':
-            subprocess.run(['git', 'push', 'upstream'], check=True)
-            print("Successfully pushed to upstream")
-            
-    except subprocess.CalledProcessError as e:
-        print(f"Error during git operations: {e}")
-        return False
-    return True
-
 def update_changelog():
+    print("Starting changelog update...")
     version = get_version()
+    print(f"Current version: {version}")
     today = datetime.now().strftime('%Y-%m-%d')
     
     script_dir = os.path.dirname(os.path.abspath(__file__))
@@ -115,7 +92,7 @@ def update_changelog():
     if not os.path.exists(changelog_path):
         with open(changelog_path, 'w') as f:
             f.write(f"# Changelog\n\n{changelog_entry}")
-        push_changes(version)
+        print(f"Created new changelog file with version {version}")
     else:
         with open(changelog_path, 'r') as f:
             content = f.read()
@@ -124,9 +101,30 @@ def update_changelog():
             updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
             with open(changelog_path, 'w') as f:
                 f.write(updated_content)
-            push_changes(version)
+            print(f"Added new version {version} to changelog")
         else:
-            print(f"Version {version} already exists in changelog")
+            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
+            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
+            
+            # Finde den Start der aktuellen Version
+            version_match = re.search(version_pattern, content)
+            if version_match:
+                version_start = version_match.start()
+                # Suche nach der nächsten Version
+                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
+                
+                if next_version_match:
+                    # Ersetze den Inhalt zwischen aktueller und nächster Version
+                    next_version_pos = version_start + 1 + next_version_match.start()
+                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
+                else:
+                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
+                    updated_content = content[:version_start] + changelog_entry + "\n"
+                
+                with open(changelog_path, 'w') as f:
+                    f.write(updated_content)
+                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/api.cpp

@@ -12,34 +12,9 @@ struct SendToApiParams {
     String updatePayload;
 };
 
-/*
-    // Spoolman Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture"
-    }
-
-    // FilaMan Data
-    {
-        "version":"1.0",
-        "protocol":"openspool",
-        "color_hex":"AF7933",
-        "type":"ABS",
-        "min_temp":175,
-        "max_temp":275,
-        "brand":"Overture",
-        "sm_id": 
-    }
-*/
-
-JsonDocument fetchSpoolsForWebsite() {
+JsonDocument fetchSingleSpoolInfo(int spoolId) {
     HTTPClient http;
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
 
     Serial.print("Rufe Spool-Daten von: ");
     Serial.println(spoolsUrl);
@@ -56,84 +31,45 @@ JsonDocument fetchSpoolsForWebsite() {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
         } else {
-            JsonArray spools = doc.as<JsonArray>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
+            String filamentType = doc["filament"]["material"].as<String>();
+            String filamentBrand = doc["filament"]["vendor"]["name"].as<String>();
 
-            for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
+            int nozzle_temp_min = 0;
+            int nozzle_temp_max = 0;
+            if (doc["filament"]["extra"]["nozzle_temperature"].is<String>()) {
+                String tempString = doc["filament"]["extra"]["nozzle_temperature"].as<String>();
+                tempString.replace("[", "");
+                tempString.replace("]", "");
+                int commaIndex = tempString.indexOf(',');
+                
+                if (commaIndex != -1) {
+                    nozzle_temp_min = tempString.substring(0, commaIndex).toInt();
+                    nozzle_temp_max = tempString.substring(commaIndex + 1).toInt();
+                }
+            } 
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
-                filament["sm_id"] = spool["id"];
-                filament["id"] = spool["filament"]["id"];
-                filament["name"] = spool["filament"]["name"];
-                filament["material"] = spool["filament"]["material"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-                filament["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"]; // [190,230]
-                filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
-                filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
+            String filamentColor = doc["filament"]["color_hex"].as<String>();
+            filamentColor.toUpperCase();
 
-                JsonObject vendor = filament.createNestedObject("vendor");
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
-            }
-        }
-    } else {
-        Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
-        Serial.println(httpCode);
-    }
+            String tray_info_idx = doc["filament"]["extra"]["bambu_idx"].as<String>();
+            tray_info_idx.replace("\"", "");
+            
+            String cali_idx = doc["filament"]["extra"]["bambu_cali_id"].as<String>(); // "\"153\""
+            cali_idx.replace("\"", "");
+            
+            String bambu_setting_id = doc["filament"]["extra"]["bambu_setting_id"].as<String>(); // "\"PFUSf40e9953b40d3d\""
+            bambu_setting_id.replace("\"", "");
 
-    http.end();
-    return filteredDoc;
-}
+            doc.clear();
 
-JsonDocument fetchAllSpoolsInfo() {
-    HTTPClient http;
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
-
-    Serial.print("Rufe Spool-Daten von: ");
-    Serial.println(spoolsUrl);
-
-    http.begin(spoolsUrl);
-    int httpCode = http.GET();
-
-    JsonDocument filteredDoc;
-    if (httpCode == HTTP_CODE_OK) {
-        String payload = http.getString();
-        JsonDocument doc;
-        DeserializationError error = deserializeJson(doc, payload);
-        if (error) {
-            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
-            Serial.println(error.c_str());
-        } else {
-            JsonArray spools = doc.as<JsonArray>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
-
-            for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
-                filteredSpool["price"] = spool["price"];
-                filteredSpool["remaining_weight"] = spool["remaining_weight"];
-                filteredSpool["used_weight"] = spool["used_weight"];
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
-
-                JsonObject filament = filteredSpool.createNestedObject("filament");
-                filament["id"] = spool["filament"]["id"];
-                filament["name"] = spool["filament"]["name"];
-                filament["material"] = spool["filament"]["material"];
-                filament["density"] = spool["filament"]["density"];
-                filament["diameter"] = spool["filament"]["diameter"];
-                filament["spool_weight"] = spool["filament"]["spool_weight"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-
-                JsonObject vendor = filament.createNestedObject("vendor");
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
-
-                JsonObject extra = filament.createNestedObject("extra");
-                extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
-                extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
-                extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
-            }
+            filteredDoc["color"] = filamentColor;
+            filteredDoc["type"] = filamentType;
+            filteredDoc["nozzle_temp_min"] = nozzle_temp_min;
+            filteredDoc["nozzle_temp_max"] = nozzle_temp_max;
+            filteredDoc["brand"] = filamentBrand;
+            filteredDoc["tray_info_idx"] = tray_info_idx;
+            filteredDoc["cali_idx"] = cali_idx;
+            filteredDoc["bambu_setting_id"] = bambu_setting_id;
         }
     } else {
         Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
@@ -161,9 +97,9 @@ void sendToApi(void *parameter) {
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
-        Serial.println("Gewicht der Spule erfolgreich aktualisiert");
+        Serial.println("Spoolman erfolgreich aktualisiert");
     } else {
-        Serial.println("Fehler beim Aktualisieren des Gewichts der Spule");
+        Serial.println("Fehler beim Senden an Spoolman!");
         oledShowMessage("Spoolman update failed");
         vTaskDelay(2000 / portTICK_PERIOD_MS);
     }
@@ -175,20 +111,20 @@ void sendToApi(void *parameter) {
     vTaskDelete(NULL);
 }
 
-uint8_t updateSpoolTagId(String uidString, const char* payload) {
+bool updateSpoolTagId(String uidString, const char* payload) {
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, payload);
     
     if (error) {
         Serial.print("Fehler beim JSON-Parsing: ");
         Serial.println(error.c_str());
-        return 0;
+        return false;
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
+    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
-        return 0;
+        return false;
     }
 
     String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + doc["sm_id"].as<String>();
@@ -207,7 +143,7 @@ uint8_t updateSpoolTagId(String uidString, const char* payload) {
     SendToApiParams* params = new SendToApiParams();
     if (params == nullptr) {
         Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
-        return 0;
+        return false;
     }
     params->httpType = "PATCH";
     params->spoolsUrl = spoolsUrl;
@@ -223,7 +159,7 @@ uint8_t updateSpoolTagId(String uidString, const char* payload) {
         NULL                      // Task-Handle (nicht benötigt)
     );
 
-    return 1;
+    return true;
 }
 
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
@@ -262,6 +198,52 @@ uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
     return 1;
 }
 
+bool updateSpoolBambuData(String payload) {
+    JsonDocument doc;
+    DeserializationError error = deserializeJson(doc, payload);
+    if (error) {
+        Serial.print("Fehler beim JSON-Parsing: ");
+        Serial.println(error.c_str());
+        return false;
+    }
+
+    String spoolsUrl = spoolmanUrl + apiUrl + "/filament/" + doc["filament_id"].as<String>();
+    Serial.print("Update Spule mit URL: ");
+    Serial.println(spoolsUrl);
+
+    JsonDocument updateDoc;
+    updateDoc["extra"]["bambu_setting_id"] = "\"" + doc["setting_id"].as<String>() + "\"";
+    updateDoc["extra"]["bambu_cali_id"] = "\"" + doc["cali_idx"].as<String>() + "\"";
+    updateDoc["extra"]["bambu_idx"] = "\"" + doc["tray_info_idx"].as<String>() + "\"";
+    updateDoc["extra"]["nozzle_temperature"] = "[" + doc["temp_min"].as<String>() + "," + doc["temp_max"].as<String>() + "]";
+
+    String updatePayload;
+    serializeJson(updateDoc, updatePayload);
+    Serial.print("Update Payload: ");
+    Serial.println(updatePayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return false;
+    }
+    params->httpType = "PATCH";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = updatePayload;
+
+    // Erstelle die Task
+    BaseType_t result = xTaskCreate(
+        sendToApi,                // Task-Funktion
+        "SendToApiTask",          // Task-Name
+        4096,                     // Stackgröße in Bytes
+        (void*)params,            // Parameter
+        0,                        // Priorität
+        NULL                      // Task-Handle (nicht benötigt)
+    );
+
+    return true;
+}
+
 // #### Spoolman init
 bool checkSpoolmanExtraFields() {
     HTTPClient http;
@@ -368,7 +350,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
+                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -403,12 +385,13 @@ bool checkSpoolmanExtraFields() {
                 }
             }
         }
-        http.end();  
     }
     
     Serial.println("-------- ENDE Prüfe Felder --------");
     Serial.println();
 
+    http.end();
+
     return true;
 }
 
@@ -430,7 +413,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc.containsKey("status")) {
+            if (!error && doc["status"].is<String>()) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -469,7 +452,7 @@ bool saveSpoolmanUrl(const String& url) {
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -14,11 +14,10 @@ bool checkSpoolmanInstance(const String& url);
 bool saveSpoolmanUrl(const String& url);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
-JsonDocument fetchSpoolsForWebsite(); // API-Funktion für die Webseite
-JsonDocument fetchAllSpoolsInfo();
-void sendAmsData(AsyncWebSocketClient *client); // Neue Funktion zum Senden von AMS-Daten
-uint8_t updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
+JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
+bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
+bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
 
 #endif

src/bambu.cpp

@@ -23,14 +23,21 @@ const char* bambu_username = "bblp";
 const char* bambu_ip = nullptr;
 const char* bambu_accesscode = nullptr;
 const char* bambu_serialnr = nullptr;
+
+String g_bambu_ip = "";
+String g_bambu_accesscode = "";
+String g_bambu_serialnr = "";
+
 bool bambu_connected = false;
+bool autoSendToBambu = false;
+int autoSetToBambuSpoolId = 0;
 
 // Globale Variablen für AMS-Daten
 int ams_count = 0;
 String amsJsonData;  // Speichert das fertige JSON für WebSocket-Clients
-AMSData ams_data[MAX_AMS];  // Definition des Arrays
+AMSData ams_data[MAX_AMS];  // Definition des Arrays;
 
-bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode) {
+bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend, const String& autoSendTime) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
     }
@@ -39,6 +46,8 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     doc["bambu_ip"] = ip;
     doc["bambu_accesscode"] = accesscode;
     doc["bambu_serialnr"] = serialnr;
+    doc["autoSendToBambu"] = autoSend;
+    doc["autoSendTime"] = (autoSendTime != "") ? autoSendTime.toInt() : autoSetBambuAmsCounter;
 
     if (!saveJsonValue("/bambu_credentials.json", doc)) {
         Serial.println("Fehler beim Speichern der Bambu-Credentials.");
@@ -49,6 +58,8 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     bambu_ip = ip.c_str();
     bambu_accesscode = accesscode.c_str();
     bambu_serialnr = serialnr.c_str();
+    autoSendToBambu = autoSend;
+    autoSetBambuAmsCounter = autoSendTime.toInt();
 
     vTaskDelay(100 / portTICK_PERIOD_MS);
     if (!setupMqtt()) return false;
@@ -58,20 +69,27 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
         String serial = doc["bambu_serialnr"].as<String>();
 
+        g_bambu_ip = ip;
+        g_bambu_accesscode = code;
+        g_bambu_serialnr = serial;
+
+        if (doc["autoSendToBambu"].is<bool>()) autoSendToBambu = doc["autoSendToBambu"].as<bool>();
+        if (doc["autoSendTime"].is<int>()) autoSetBambuAmsCounter = doc["autoSendTime"].as<int>();
+
         ip.trim();
         code.trim();
         serial.trim();
 
         // Dynamische Speicherallokation für die globalen Pointer
-        bambu_ip = strdup(ip.c_str());
-        bambu_accesscode = strdup(code.c_str());
-        bambu_serialnr = strdup(serial.c_str());
+        bambu_ip = g_bambu_ip.c_str();
+        bambu_accesscode = g_bambu_accesscode.c_str();
+        bambu_serialnr = g_bambu_serialnr.c_str();
 
         report_topic = "device/" + String(bambu_serialnr) + "/report";
         //request_topic = "device/" + String(bambu_serialnr) + "/request";
@@ -81,19 +99,49 @@ bool loadBambuCredentials() {
     return false;
 }
 
-String findFilamentIdx(String brand, String type) {
+struct FilamentResult {
+    String key;
+    String type;
+};
+
+FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
+    // Laden der own_filaments.json
+    String ownFilament = "";
+    if (!loadJsonValue("/own_filaments.json", doc)) 
+    {
+        Serial.println("Fehler beim Laden der eigenen Filament-Daten");
+    }
+    else
+    {
+        // Durchsuche direkt nach dem Type als Schlüssel
+        if (doc[type].is<String>()) {
+            ownFilament = doc[type].as<String>();
+        }
+        doc.clear();
+    }
+    doc.clear();
+
     // Laden der bambu_filaments.json
-    if (!loadJsonValue("/bambu_filaments.json", doc)) {
+    if (!loadJsonValue("/bambu_filaments.json", doc)) 
+    {
         Serial.println("Fehler beim Laden der Filament-Daten");
-        return "GFL99"; // Fallback auf Generic PLA
+        return {"GFL99", "PLA"}; // Fallback auf Generic PLA
     }
 
+    // Wenn eigener Typ
+    if (ownFilament != "")
+    {
+        if (doc[ownFilament].is<String>()) 
+        {
+            return {ownFilament, doc[ownFilament].as<String>()};
+        }
+    }
+
+    // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
     String searchKey;
-    
-    // 1. Suche nach Brand + Type Kombination
     if (brand == "Bambu" || brand == "Bambulab") {
         searchKey = "Bambu " + type;
     } else if (brand == "PolyLite") {
@@ -109,23 +157,46 @@ String findFilamentIdx(String brand, String type) {
     // Durchsuche alle Einträge nach der Brand + Type Kombination
     for (JsonPair kv : doc.as<JsonObject>()) {
         if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+            return {kv.key().c_str(), kv.value().as<String>()};
         }
     }
 
-    // 2. Wenn nicht gefunden, suche nach Generic + Type
-    searchKey = "Generic " + type;
+    // 2. Wenn nicht gefunden, zerlege den type String in Wörter und suche nach jedem Wort
+    // Sammle alle vorhandenen Filamenttypen aus der JSON
+    std::vector<String> knownTypes;
     for (JsonPair kv : doc.as<JsonObject>()) {
-        if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+        String value = kv.value().as<String>();
+        // Extrahiere den Typ ohne Markennamen
+        if (value.indexOf(" ") != -1) {
+            value = value.substring(value.indexOf(" ") + 1);
+        }
+        if (!value.isEmpty()) {
+            knownTypes.push_back(value);
+        }
+    }
+
+    // Zerlege den Input-Type in Wörter
+    String typeStr = type;
+    typeStr.trim();
+    
+    // Durchsuche für jedes bekannte Filament, ob es im Input vorkommt
+    for (const String& knownType : knownTypes) {
+        if (typeStr.indexOf(knownType) != -1) {
+            // Suche nach diesem Typ in der Original-JSON
+            for (JsonPair kv : doc.as<JsonObject>()) {
+                String value = kv.value().as<String>();
+                if (value.indexOf(knownType) != -1) {
+                    return {kv.key().c_str(), knownType};
+                }
+            }
         }
     }
 
     // 3. Wenn immer noch nichts gefunden, gebe GFL99 zurück (Generic PLA)
-    return "GFL99";
+    return {"GFL99", "PLA"};
 }
 
-bool sendMqttMessage(String payload) {
+bool sendMqttMessage(const String& payload) {
     Serial.println("Sending MQTT message");
     Serial.println(payload);
     if (client.publish(report_topic.c_str(), payload.c_str())) 
@@ -156,15 +227,22 @@ bool setBambuSpool(String payload) {
     int minTemp = doc["nozzle_temp_min"];
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
+    (type == "PLA+") ? type = "PLA" : type;
     String brand = doc["brand"].as<String>();
     String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
-    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    if (tray_info_idx == "") {
+        if (brand != "" && type != "") {
+            FilamentResult result = findFilamentIdx(brand, type);
+            tray_info_idx = result.key;
+            type = result.type;  // Aktualisiere den type mit dem gefundenen Basistyp
+        }
+    }
     String setting_id = doc["bambu_setting_id"].as<String>();
     String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
-    doc["print"]["sequence_id"] = 0;
+    doc["print"]["sequence_id"] = "0";
     doc["print"]["command"] = "ams_filament_setting";
     doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
     doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
@@ -172,10 +250,10 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
+    //doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
     doc["print"]["setting_id"] = setting_id;
-
+    
     // Serialize the JSON
     String output;
     serializeJson(doc, output);
@@ -194,13 +272,13 @@ bool setBambuSpool(String payload) {
 
     if (cali_idx != "") {
         yield();
-        doc["print"]["sequence_id"] = 0;
+        doc["print"]["sequence_id"] = "0";
         doc["print"]["command"] = "extrusion_cali_sel";
         doc["print"]["filament_id"] = tray_info_idx;
         doc["print"]["nozzle_diameter"] = "0.4";
         doc["print"]["cali_idx"] = cali_idx.toInt();
         doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        //doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
 
         // Serialize the JSON
         String output;
@@ -218,44 +296,120 @@ bool setBambuSpool(String payload) {
         doc.clear();
         yield();
     }
-/*
-    if (setting_id != "") {
-        yield();
-        doc["print"]["sequence_id"] = 0;
-        doc["print"]["command"] = "ams_filament_setting";
-        doc["print"]["nozzle_temp_min"] = minTemp;
-        doc["print"]["nozzle_temp_max"] = maxTemp;
-        doc["print"]["setting_id"] = setting_id;
-        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
-        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["tray_info_idx"] = tray_info_idx;
-        doc["print"]["tray_type"] = type;
 
-        // Serialize the JSON
-        String output;
-        serializeJson(doc, output);
+    return true;
+}
 
-        if (sendMqttMessage(output)) {
-            Serial.println("Filament Setting successfully set");
+void autoSetSpool(int spoolId, uint8_t trayId) {
+    // wenn neue spule erkannt und autoSetToBambu > 0
+    JsonDocument spoolInfo = fetchSingleSpoolInfo(spoolId);
+
+    if (!spoolInfo.isNull())
+    {
+        // AMS und TRAY id ergänzen
+        spoolInfo["amsId"] = 0;
+        spoolInfo["trayId"] = trayId;
+
+        Serial.println("Auto set spool");
+        Serial.println(spoolInfo.as<String>());
+
+        setBambuSpool(spoolInfo.as<String>());
+
+        oledShowMessage("Spool set");
+    }
+
+    // id wieder zurücksetzen damit abgeschlossen
+    autoSetToBambuSpoolId = 0;
+}
+
+void updateAmsWsData(JsonDocument& doc, JsonArray& amsArray, int& ams_count, JsonObject& vtTray) {
+    // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
+    ams_count = amsArray.size();
+        
+    for (int i = 0; i < ams_count && i < 16; i++) {
+        JsonObject amsObj = amsArray[i];
+        JsonArray trayArray = amsObj["tray"].as<JsonArray>();
+
+        ams_data[i].ams_id = i; // Setze die AMS-ID
+        for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
+            JsonObject trayObj = trayArray[j];
+
+            ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
+            ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
+            ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
+            ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
+            ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
+            ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
+            ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
+            //ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
+            ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
+        }
+    }
+    
+    // Setze ams_count auf die Anzahl der normalen AMS
+    ams_count = amsArray.size();
+
+    // Wenn externe Spule vorhanden, füge sie hinzu
+    if (doc["print"]["vt_tray"].is<JsonObject>()) {
+        //JsonObject vtTray = doc["print"]["vt_tray"];
+        int extIdx = ams_count;  // Index für externe Spule
+        ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
+        ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
+        ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
+        ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
+        ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
+        ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
+        ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
+        ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
+
+        if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
+        {
+            //ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
         }
         else
         {
-            Serial.println("Failed to set Filament setting");
-            return false;
+            ams_data[extIdx].trays[0].setting_id = "";
+            ams_data[extIdx].trays[0].cali_idx = "";
         }
-
-        doc.clear();
-        yield();
+        ams_count++;  // Erhöhe ams_count für die externe Spule
     }
-*/
 
-    return true;
+    // Erstelle JSON für WebSocket-Clients
+    JsonDocument wsDoc;
+    JsonArray wsArray = wsDoc.to<JsonArray>();
+
+    for (int i = 0; i < ams_count; i++) {
+        JsonObject amsObj = wsArray.add<JsonObject>();
+        amsObj["ams_id"] = ams_data[i].ams_id;
+
+        JsonArray trays = amsObj["tray"].to<JsonArray>();
+        int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
+        
+        for (int j = 0; j < maxTrays; j++) {
+            JsonObject trayObj = trays.add<JsonObject>();
+            trayObj["id"] = ams_data[i].trays[j].id;
+            trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
+            trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
+            trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
+            trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
+            trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
+            trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
+            trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
+            trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
+        }
+    }
+
+    serializeJson(wsArray, amsJsonData);
+    wsDoc.clear();
+    Serial.println("AMS data updated");
+    sendAmsData(nullptr);
 }
 
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
+    
     for (int i = 0; i < length; i++) {
         message += (char)payload[i];
     }
@@ -263,16 +417,28 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     // JSON-Dokument parsen
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, message);
-    if (error) {
+    message = "";
+    if (error) 
+    {
         Serial.print("Fehler beim Parsen des JSON: ");
         Serial.println(error.c_str());
         return;
     }
 
+    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
+    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
+        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
+        && !doc["print"]["ams"]["ams"].as<JsonArray>())
+    {
+        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
+    }
+
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"].containsKey("upgrade_state")) {
+    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
+        if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
+        {
             return;
         }
 
@@ -304,9 +470,13 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             // Vergleiche die Trays
             for (int j = 0; j < trayArray.size() && j < 4 && !hasChanges; j++) {
                 JsonObject trayObj = trayArray[j];
+
+                if (trayObj["tray_type"].as<String>() == "") ams_data[storedIndex].trays[j].setting_id = "";
+                if (trayObj["setting_id"].isNull()) trayObj["setting_id"] = "";
                 if (trayObj["tray_info_idx"].as<String>() != ams_data[storedIndex].trays[j].tray_info_idx ||
                     trayObj["tray_type"].as<String>() != ams_data[storedIndex].trays[j].tray_type ||
                     trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color ||
+                    (trayObj["setting_id"].as<String>() != "" && trayObj["setting_id"].as<String>() != ams_data[storedIndex].trays[j].setting_id) ||
                     trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
                     break;
@@ -315,143 +485,55 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
-            JsonObject vtTray = doc["print"]["vt_tray"];
-            bool foundExternal = false;
-            
+        JsonObject vtTray = doc["print"]["vt_tray"];
+        if (doc["print"]["vt_tray"].is<JsonObject>()) {
             for (int i = 0; i < ams_count; i++) {
                 if (ams_data[i].ams_id == 255) {
-                    foundExternal = true;
+                    if (vtTray["tray_type"].as<String>() == "") ams_data[i].trays[0].setting_id = "";
+                    if (vtTray["setting_id"].isNull()) vtTray["setting_id"] = "";
                     if (vtTray["tray_info_idx"].as<String>() != ams_data[i].trays[0].tray_info_idx ||
                         vtTray["tray_type"].as<String>() != ams_data[i].trays[0].tray_type ||
                         vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color ||
-                        vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx) {
+                        (vtTray["setting_id"].as<String>() != "" && vtTray["setting_id"].as<String>() != ams_data[i].trays[0].setting_id) ||
+                        (vtTray["tray_type"].as<String>() != "" && vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx)) {
                         hasChanges = true;
                     }
                     break;
                 }
             }
-            if (!foundExternal) hasChanges = true;
         }
 
         if (!hasChanges) return;
 
-        // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
-        ams_count = amsArray.size();
-        
-        for (int i = 0; i < ams_count && i < 16; i++) {
-            JsonObject amsObj = amsArray[i];
-            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
-
-            ams_data[i].ams_id = i; // Setze die AMS-ID
-            for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
-                JsonObject trayObj = trayArray[j];
-
-                ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
-                ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
-                ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
-                ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
-                ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
-                ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
-                ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
-                ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
-                ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
-            }
-        }
-        
-        // Setze ams_count auf die Anzahl der normalen AMS
-        ams_count = amsArray.size();
-
-        // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"].containsKey("vt_tray")) {
-            JsonObject vtTray = doc["print"]["vt_tray"];
-            int extIdx = ams_count;  // Index für externe Spule
-            ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
-            ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
-            ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
-            ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
-            ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
-            ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
-            ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
-            ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
-            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
-            ams_count++;  // Erhöhe ams_count für die externe Spule
-        }
-
-        // Sende die aktualisierten AMS-Daten
-        //sendAmsData(nullptr);
-
-        // Erstelle JSON für WebSocket-Clients
-        JsonDocument wsDoc;
-        JsonArray wsArray = wsDoc.to<JsonArray>();
-
-        for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.createNestedObject();
-            amsObj["ams_id"] = ams_data[i].ams_id;
-
-            JsonArray trays = amsObj.createNestedArray("tray");
-            int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
-            
-            for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.createNestedObject();
-                trayObj["id"] = ams_data[i].trays[j].id;
-                trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
-                trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
-                trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
-                trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
-                trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
-                trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
-                trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
-                trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
-            }
-        }
-
-        serializeJson(wsArray, amsJsonData);
-        sendAmsData(nullptr);
+        updateAmsWsData(doc, amsArray, ams_count, vtTray);
     }
+    
     // Neue Bedingung für ams_filament_setting
-    else if (doc["print"]["command"] == "ams_filament_setting") {
+    if (doc["print"]["command"] == "ams_filament_setting") {
         int amsId = doc["print"]["ams_id"].as<int>();
         int trayId = doc["print"]["tray_id"].as<int>();
-        String settingId = doc["print"]["setting_id"].as<String>();
-        
+        String settingId = (doc["print"]["setting_id"].is<String>()) ? doc["print"]["setting_id"].as<String>() : "";
+
         // Finde das entsprechende AMS und Tray
         for (int i = 0; i < ams_count; i++) {
             if (ams_data[i].ams_id == amsId) {
-                // Update setting_id im entsprechenden Tray
-                ams_data[i].trays[trayId].setting_id = settingId;
-                
-                // Erstelle neues JSON für WebSocket-Clients
-                JsonDocument wsDoc;
-                JsonArray wsArray = wsDoc.to<JsonArray>();
-
-                for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.createNestedObject();
-                    amsObj["ams_id"] = ams_data[j].ams_id;
-
-                    JsonArray trays = amsObj.createNestedArray("tray");
-                    int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
-                    
-                    for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.createNestedObject();
-                        trayObj["id"] = ams_data[j].trays[k].id;
-                        trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
-                        trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
-                        trayObj["tray_sub_brands"] = ams_data[j].trays[k].tray_sub_brands;
-                        trayObj["tray_color"] = ams_data[j].trays[k].tray_color;
-                        trayObj["nozzle_temp_min"] = ams_data[j].trays[k].nozzle_temp_min;
-                        trayObj["nozzle_temp_max"] = ams_data[j].trays[k].nozzle_temp_max;
-                        trayObj["setting_id"] = ams_data[j].trays[k].setting_id;
-                        trayObj["cali_idx"] = ams_data[j].trays[k].cali_idx;
+                if (trayId == 254)
+                {
+                    // Suche AMS mit ID 255 (externe Spule)
+                    for (int j = 0; j < ams_count; j++) {
+                        if (ams_data[j].ams_id == 255) {
+                            ams_data[j].trays[0].setting_id = settingId;
+                            break;
+                        }
                     }
                 }
-
-                // Aktualisiere das globale amsJsonData
-                amsJsonData = "";
-                serializeJson(wsArray, amsJsonData);
-                
+                else
+                {
+                    ams_data[i].trays[trayId].setting_id = settingId;
+                }
+               
                 // Sende an WebSocket Clients
+                Serial.println("Filament setting updated");
                 sendAmsData(nullptr);
                 break;
             }
@@ -461,15 +543,16 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
 
 void reconnect() {
     // Loop until we're reconnected
+    uint8_t retries = 0;
     while (!client.connected()) {
-        Serial.print("Attempting MQTT connection...");
+        Serial.println("Attempting MQTT re/connection...");
         bambu_connected = false;
         oledShowTopRow();
 
         // Attempt to connect
         if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) {
-            Serial.println("... re-connected");
-            // ... and resubscribe
+            Serial.println("MQTT re/connected");
+
             client.subscribe(report_topic.c_str());
             bambu_connected = true;
             oledShowTopRow();
@@ -479,14 +562,23 @@ void reconnect() {
             Serial.println(" try again in 5 seconds");
             bambu_connected = false;
             oledShowTopRow();
-            // Wait 5 seconds before retrying
+            
             yield();
             vTaskDelay(5000 / portTICK_PERIOD_MS);
+            if (retries > 5) {
+                Serial.println("Disable Bambu MQTT Task after 5 retries");
+                //vTaskSuspend(BambuMqttTask);
+                vTaskDelete(BambuMqttTask);
+                break;
+            }
+
+            retries++;
         }
     }
 }
 
 void mqtt_loop(void * parameter) {
+    Serial.println("Bambu MQTT Task gestartet");
     for(;;) {
         if (pauseBambuMqttTask) {
             vTaskDelay(10000);
@@ -500,6 +592,7 @@ void mqtt_loop(void * parameter) {
         }
         client.loop();
         yield();
+        esp_task_wdt_reset();
         vTaskDelay(100);
     }
 }
@@ -540,7 +633,7 @@ bool setupMqtt() {
             xTaskCreatePinnedToCore(
                 mqtt_loop, /* Function to implement the task */
                 "BambuMqtt", /* Name of the task */
-                10000,  /* Stack size in words */
+                8192,  /* Stack size in words */
                 NULL,  /* Task input parameter */
                 mqttTaskPrio,  /* Priority of the task */
                 &BambuMqttTask,  /* Task handle. */

src/bambu.h

@@ -28,12 +28,15 @@ extern bool bambu_connected;
 
 extern int ams_count;
 extern AMSData ams_data[MAX_AMS];
+extern bool autoSendToBambu;
+extern int autoSetToBambuSpoolId;
 
 bool loadBambuCredentials();
-bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode);
+bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend, const String& autoSendTime);
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
 void bambu_restart();
 
+extern TaskHandle_t BambuMqttTask;
 #endif

src/commonFS.cpp

@@ -1,7 +1,8 @@
 #include "commonFS.h"
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "w");
+    File file = LittleFS.open(filename, "w");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Schreiben: ");
         Serial.println(filename);
@@ -19,7 +20,7 @@ bool saveJsonValue(const char* filename, const JsonDocument& doc) {
 }
 
 bool loadJsonValue(const char* filename, JsonDocument& doc) {
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Lesen: ");
         Serial.println(filename);
@@ -35,23 +36,12 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-bool initializeSPIFFS() {
-    // Erster Versuch
-    if (SPIFFS.begin(true)) {
-        Serial.println("SPIFFS mounted successfully.");
-        return true;
+void initializeFileSystem() {
+    if (!LittleFS.begin(true)) {
+        Serial.println("LittleFS Mount Failed");
+        return;
     }
-    
-    // Formatierung versuchen
-    Serial.println("Failed to mount SPIFFS. Formatting...");
-    SPIFFS.format();
-    
-    // Zweiter Versuch nach Formatierung
-    if (SPIFFS.begin(true)) {
-        Serial.println("SPIFFS formatted and mounted successfully.");
-        return true;
-    }
-    
-    Serial.println("SPIFFS initialization failed completely.");
-    return false;
+    Serial.printf("LittleFS Total: %u bytes\n", LittleFS.totalBytes());
+    Serial.printf("LittleFS Used: %u bytes\n", LittleFS.usedBytes());
+    Serial.printf("LittleFS Free: %u bytes\n", LittleFS.totalBytes() - LittleFS.usedBytes());
 }

src/commonFS.h

@@ -2,11 +2,11 @@
 #define COMMONFS_H
 
 #include <Arduino.h>
-#include <SPIFFS.h>
 #include <ArduinoJson.h>
+#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-bool initializeSPIFFS();
+void initializeFileSystem();
 
 #endif

src/config.cpp

@@ -40,6 +40,10 @@ const uint8_t webserverPort = 80;
 const char* apiUrl = "/api/v1";
 // ***** API
 
+// ***** Bambu Auto Set Spool
+uint8_t autoSetBambuAmsCounter = 60;
+// ***** Bambu Auto Set Spool
+
 // ***** Task Prios
 uint8_t rfidTaskCore = 1;
 uint8_t rfidTaskPrio = 1;

src/config.h

@@ -23,6 +23,8 @@ extern const uint8_t OLED_DATA_END;
 extern const char* apiUrl;
 extern const uint8_t webserverPort;
 
+extern uint8_t autoSetBambuAmsCounter;
+
 extern const unsigned char wifi_on[];
 extern const unsigned char wifi_off[];
 extern const unsigned char cloud_on[];

src/display.cpp

@@ -20,9 +20,9 @@ void setupDisplay() {
     // the library initializes this with an Adafruit splash screen.
     display.setTextColor(WHITE);
     display.display();
-    delay(1000); // Pause for 2 seconds
     oledShowTopRow();
-    delay(2000);
+    oledShowMessage("FilaMan v" + String(VERSION));
+    vTaskDelay(2000 / portTICK_PERIOD_MS);
 }
 
 void oledclearline() {
@@ -117,7 +117,6 @@ std::vector<String> splitTextIntoLines(String text, uint8_t textSize) {
         lines.push_back(currentLine);
     }
     
-    Serial.println(lines.size());
     return lines;
 }
 
@@ -140,8 +139,9 @@ void oledShowMultilineMessage(String message, uint8_t size) {
     int totalHeight = lines.size() * lineHeight;
     int startY = OLED_DATA_START + ((OLED_DATA_END - OLED_DATA_START - totalHeight) / 2);
     
+    uint8_t lineDistance = (lines.size() == 2) ? 5 : 0;
     for (size_t i = 0; i < lines.size(); i++) {
-        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight));
+        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight) + (i == 1 ? lineDistance : 0));
         display.print(lines[i]);
     }
     

src/main.cpp

@@ -1,10 +1,8 @@
 #include <Arduino.h>
-#include <WiFi.h>
-#include <DNSServer.h>
-#include <WiFiManager.h>
-#include <ESPmDNS.h>
 #include <Wire.h>
+#include <WiFi.h>
 
+#include "wlan.h"
 #include "config.h"
 #include "website.h"
 #include "api.h"
@@ -15,18 +13,18 @@
 #include "esp_task_wdt.h"
 #include "commonFS.h"
 
-// ***** WIFI initialisieren
-WiFiManager wm;
-bool wm_nonblocking = false;
-void initWiFi();
-// ################### Functions
-
 // ##### SETUP #####
 void setup() {
   Serial.begin(115200);
 
+  uint64_t chipid;
+
+  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
+  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
+  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
+
   // Initialize SPIFFS
-  initializeSPIFFS();
+  initializeFileSystem();
 
   // Start Display
   setupDisplay();
@@ -35,7 +33,6 @@ void setup() {
   initWiFi();
 
   // Webserver
-  Serial.println("Starte Webserver");
   setupWebserver(server);
 
   // Spoolman API
@@ -43,22 +40,27 @@ void setup() {
   initSpoolman();
 
   // Bambu MQTT
-  // bambu.cpp
   setupMqtt();
 
-  // mDNS
-  Serial.println("Starte MDNS");
-  if (!MDNS.begin("filaman")) {   // Set the hostname to "esp32.local"
-    Serial.println("Error setting up MDNS responder!");
-    while(1) {
-      delay(1000);
-    }
-  }
-  Serial.println("mDNS responder started");
-  
+  // NFC Reader
   startNfc();
 
-  start_scale();
+  uint8_t scaleCalibrated = start_scale();
+  if (scaleCalibrated == 3) {
+    oledShowMessage("Scale not calibrated!");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  } else if (scaleCalibrated == 0) {
+    oledShowMessage("HX711 not found");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  }
   
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
@@ -72,45 +74,85 @@ void setup() {
 }
 
 
+/**
+ * Safe interval check that handles millis() overflow
+ * @param currentTime Current millis() value
+ * @param lastTime Last recorded time
+ * @param interval Desired interval in milliseconds
+ * @return True if interval has elapsed
+ */
+bool intervalElapsed(unsigned long currentTime, unsigned long &lastTime, unsigned long interval) {
+  if (currentTime - lastTime >= interval || currentTime < lastTime) {
+    lastTime = currentTime;
+    return true;
+  }
+  return false;
+}
+
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
-unsigned long lastAmsSendTime = 0;
-const unsigned long amsSendInterval = 60000; // 1 minute
+unsigned long lastAutoSetBambuAmsTime = 0;
+const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
+uint8_t autoAmsCounter = 0;
 
 uint8_t weightSend = 0;
 int16_t lastWeight = 0;
-uint8_t wifiErrorCounter = 0;
+
+unsigned long lastWifiCheckTime = 0;
+const unsigned long wifiCheckInterval = 60000; // Überprüfe alle 60 Sekunden (60000 ms)
 
 // ##### PROGRAM START #####
 void loop() {
-  // Überprüfe den WLAN-Status
-  if (WiFi.status() != WL_CONNECTED) {
-    wifiErrorCounter++;
-    wifiOn = false;
-  } else {
-    wifiErrorCounter = 0;
-    wifiOn = true;
-  }
-  if (wifiErrorCounter > 20) ESP.restart();
-
   unsigned long currentMillis = millis();
 
-  // Falls WifiManager im nicht blockenden Modus ist
-  //if(wm_nonblocking) wm.process();
-
-  // Send AMS Data min every Minute
-  if (currentMillis - lastAmsSendTime >= amsSendInterval) {
-    lastAmsSendTime = currentMillis;
-    sendAmsData(nullptr);
+  // Überprüfe regelmäßig die WLAN-Verbindung
+  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) {
+    checkWiFiConnection();
   }
 
+  // Wenn Bambu auto set Spool aktiv
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0) {
+    if (intervalElapsed(currentMillis, lastAutoSetBambuAmsTime, autoSetBambuAmsInterval)) 
+    {
+      if (hasReadRfidTag == 0)
+      {
+        lastAutoSetBambuAmsTime = currentMillis;
+        oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
+        autoAmsCounter++;
+
+        if (autoAmsCounter >= autoSetBambuAmsCounter) 
+        {
+          autoSetToBambuSpoolId = 0;
+          autoAmsCounter = 0;
+          oledShowWeight(weight);
+        }
+      }
+      else
+      {
+        autoAmsCounter = 0;
+      }
+    }
+  }
+
+  // Wenn Waage nicht Kalibriert
+  if (scaleCalibrated == 3) 
+  {
+    oledShowMessage("Scale not calibrated!");
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+    yield();
+    esp_task_wdt_reset();
+    
+    return;
+  } 
+
   // Ausgabe der Waage auf Display
-  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
+  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0))
   {
-    (weight < 0) ? oledShowMessage("!! -1") : oledShowWeight(weight);
+    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
   }
 
+
   // Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag < 3)
   {
@@ -137,6 +179,7 @@ void loop() {
       weightSend = 0;
     }
   }
+
   // reset weight counter after writing tag
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag > 1)
   {
@@ -146,13 +189,14 @@ void loop() {
   lastWeight = weight;
 
   // Wenn ein Tag mit SM id erkannte wurde und der Waage Counter anspricht an SM Senden
-  if (spoolId != "" && weigthCouterToApi > 5 && weightSend == 0 && hasReadRfidTag == 1) {
+  if (spoolId != "" && weigthCouterToApi > 3 && weightSend == 0 && hasReadRfidTag == 1) {
     oledShowIcon("loading");
     if (updateSpoolWeight(spoolId, weight)) 
     {
       oledShowIcon("success");
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
+      autoSetToBambuSpoolId = spoolId.toInt();
     }
     else
     {
@@ -164,38 +208,3 @@ void loop() {
   yield();
   esp_task_wdt_reset();
 }
-
-// ##### Funktionen für Konfiguration #####
-void initWiFi() {
-  WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
-
-  if(wm_nonblocking) wm.setConfigPortalBlocking(false);
-  wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
-
-  oledShowTopRow();
-  oledShowMessage("WiFi Setup");
-  
-  bool res;
-  // res = wm.autoConnect(); // auto generated AP name from chipid
-  res = wm.autoConnect("FilaMan"); // anonymous ap
-  // res = wm.autoConnect("spoolman","password"); // password protected ap
-
-  if(!res) {
-    Serial.println("Failed to connect or hit timeout");
-    // ESP.restart();
-    oledShowTopRow();
-    oledShowMessage("WiFi not connected Check Portal");
-  } 
-  else {
-    wifiOn = true;
-
-    //if you get here you have connected to the WiFi    
-    Serial.println("connected...yeey :)");
-    Serial.print("IP address: ");
-    Serial.println(WiFi.localIP());
-
-    oledShowTopRow();
-    display.display();
-  }
-}
-// ##### Funktionen für Konfiguration Ende #####

src/nfc.cpp

@@ -6,6 +6,7 @@
 #include "website.h"
 #include "api.h"
 #include "esp_task_wdt.h"
+#include "scale.h"
 
 //Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
 Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
@@ -93,14 +94,6 @@ bool formatNdefTag() {
   }
 
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  /*
-  if (!formatNdefTag()) {
-    Serial.println("Fehler beim Formatieren des NDEF-Tags.");
-    hasReadRfidTag = 2;
-    return 0;
-  }
-  */
-
   uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
@@ -137,9 +130,6 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     return 0;
   }
 
-  //Serial.println();
-  //Serial.print("Header Size: ");Serial.println(sizeof(pageHeader));
-
   // Kombiniere Header und Payload
   int totalSize = sizeof(pageHeader) + len;
   uint8_t* combinedData = (uint8_t*) malloc(totalSize);
@@ -149,37 +139,10 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     return 0;
   }
 
-  // Überprüfe die Kombination von Header und Payload
-  /*
-  Serial.print("Header: ");
-  for (int i = 0; i < sizeof(pageHeader); i++) {
-    Serial.print(pageHeader[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-
-  Serial.print("Payload: ");
-  for (int i = 0; i < len; i++) {
-    Serial.print(payload[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-  */
-
   // Kombiniere Header und Payload
   memcpy(combinedData, pageHeader, sizeof(pageHeader));
   memcpy(&combinedData[sizeof(pageHeader)], payload, len);
 
-  // Überprüfe die Kombination von Header und Payload
-  /*
-  Serial.print("Kombinierte Daten: ");
-  for (int i = 0; i < totalSize; i++) {
-    Serial.print(combinedData[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-  */
-
   // Schreibe die Seiten
   uint8_t a = 0;
   uint8_t i = 0;
@@ -188,21 +151,9 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     int bytesToWrite = (totalSize < 4) ? totalSize : 4;
     memcpy(pageBuffer, combinedData + a, bytesToWrite);
 
-    // Überprüfe die Schreibung der Seiten
-    /*
-    Serial.print("Seite ");
-    Serial.print(i);
-    Serial.print(": ");
-    for (int j = 0; j < bytesToWrite; j++) {
-      Serial.print(pageBuffer[j], HEX);
-      Serial.print(" ");
-    }
-    Serial.println();
-    */
-    uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-    uint8_t uidLength;
-    nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 500);
-    //Serial.print("Schreibe Seite: ");Serial.println(i);
+    //uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
+    //uint8_t uidLength;
+    //nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 100);
 
     if (!(nfc.ntag2xx_WritePage(4+i, pageBuffer))) 
     {
@@ -210,8 +161,6 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
       free(combinedData);
       return 0;
     }
-    
-    //Serial.print("Seite geschrieben: ");Serial.println(i);
 
     yield();
     //esp_task_wdt_reset();
@@ -285,12 +234,18 @@ void writeJsonToTag(void *parameter) {
 
   // Gib die erstellte NDEF-Message aus
   Serial.println("Erstelle NDEF-Message...");
+  Serial.println(payload);
+
   hasReadRfidTag = 3;
   vTaskSuspend(RfidReaderTask);
+  vTaskDelay(50 / portTICK_PERIOD_MS);
+
   //pauseBambuMqttTask = true;
   // aktualisieren der Website wenn sich der Status ändert
   sendNfcData(nullptr);
-
+  vTaskDelay(100 / portTICK_PERIOD_MS);
+  oledShowMessage("Waiting for NFC-Tag");
+  
   // Wait 10sec for tag
   uint8_t success = 0;
   String uidString = "";
@@ -326,13 +281,23 @@ void writeJsonToTag(void *parameter) {
         Serial.println("NDEF-Message erfolgreich auf den Tag geschrieben");
         //oledShowMessage("NFC-Tag written");
         oledShowIcon("success");
-        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        vTaskDelay(1000 / portTICK_PERIOD_MS);
         hasReadRfidTag = 5;
         // aktualisieren der Website wenn sich der Status ändert
         sendNfcData(nullptr);
-        vTaskResume(RfidReaderTask);
         pauseBambuMqttTask = false;
-        updateSpoolTagId(uidString, payload);
+        
+        if (updateSpoolTagId(uidString, payload)) {
+          uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
+          uint8_t uidLength;
+          oledShowIcon("success");
+          while (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 500)) {
+            yield();
+          }
+        }
+          
+        vTaskResume(RfidReaderTask);
+        vTaskDelay(500 / portTICK_PERIOD_MS);        
     } 
     else 
     {
@@ -361,16 +326,19 @@ void writeJsonToTag(void *parameter) {
 
 void startWriteJsonToTag(const char* payload) {
   char* payloadCopy = strdup(payload);
-    
-  // Erstelle die Task
-  xTaskCreate(
-      writeJsonToTag,        // Task-Funktion
-      "WriteJsonToTagTask",       // Task-Name
-      4096,                        // Stackgröße in Bytes
-      (void*)payloadCopy,         // Parameter
-      rfidWriteTaskPrio,           // Priorität
-      NULL                         // Task-Handle (nicht benötigt)
-  );
+  
+  // Task nicht mehrfach starten
+  if (hasReadRfidTag != 3) {
+    // Erstelle die Task
+    xTaskCreate(
+        writeJsonToTag,        // Task-Funktion
+        "WriteJsonToTagTask",       // Task-Name
+        5115,                        // Stackgröße in Bytes
+        (void*)payloadCopy,         // Parameter
+        rfidWriteTaskPrio,           // Priorität
+        NULL                         // Task-Handle (nicht benötigt)
+    );
+  }
 }
 
 void scanRfidTask(void * parameter) {
@@ -397,7 +365,7 @@ void scanRfidTask(void * parameter) {
         hasReadRfidTag = 6;
 
         oledShowIcon("transfer");
-        vTaskDelay(1000 / portTICK_PERIOD_MS);
+        vTaskDelay(500 / portTICK_PERIOD_MS);
 
         if (uidLength == 7)
         {
@@ -454,7 +422,7 @@ void scanRfidTask(void * parameter) {
         //uidString = "";
         nfcJsonData = "";
         Serial.println("Tag entfernt");
-        oledShowWeight(0);
+        if (!autoSendToBambu) oledShowWeight(weight);
       }
 
       // aktualisieren der Website wenn sich der Status ändert
@@ -490,7 +458,7 @@ void startNfc() {
     BaseType_t result = xTaskCreatePinnedToCore(
       scanRfidTask, /* Function to implement the task */
       "RfidReader", /* Name of the task */
-      10000,  /* Stack size in words */
+      5115,  /* Stack size in words */
       NULL,  /* Task input parameter */
       rfidTaskPrio,  /* Priority of the task */
       &RfidReaderTask,  /* Task handle. */

src/ota.cpp

@@ -0,0 +1,205 @@
+#include <Arduino.h>
+#include <website.h>
+#include <commonFS.h>
+
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
+// Globale Variable für den Update-Typ
+static int currentUpdateCommand = 0;
+
+// Globale Update-Variablen
+static size_t updateTotalSize = 0;
+static size_t updateWritten = 0;
+static bool isSpiffsUpdate = false;
+
+
+void backupJsonConfigs() {
+    // Bambu Credentials backup
+    if (LittleFS.exists("/bambu_credentials.json")) {
+        File file = LittleFS.open("/bambu_credentials.json", "r");
+        if (file) {
+            bambuCredentialsBackup = file.readString();
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
+    }
+
+    // Spoolman URL backup
+    if (LittleFS.exists("/spoolman_url.json")) {
+        File file = LittleFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    // Restore Bambu credentials
+    if (bambuCredentialsBackup.length() > 0) {
+        File file = LittleFS.open("/bambu_credentials.json", "w");
+        if (file) {
+            file.print(bambuCredentialsBackup);
+            file.close();
+            Serial.println("Bambu credentials restored");
+        }
+        bambuCredentialsBackup = ""; // Clear backup
+    }
+
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = LittleFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
+        }
+        spoolmanUrlBackup = ""; // Clear backup
+    }
+}
+
+void espRestart() {
+    yield();
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+
+    ESP.restart();
+}
+
+
+void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
+    static int lastSentProgress = -1;
+    
+    // Verhindere zu häufige Updates
+    if (progress == lastSentProgress && !status && !message) {
+        return;
+    }
+    
+    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
+    if (status) {
+        progressMsg += ",\"status\":\"" + String(status) + "\"";
+    }
+    if (message) {
+        progressMsg += ",\"message\":\"" + String(message) + "\"";
+    }
+    progressMsg += "}";
+    
+    if (progress >= 100) {
+        // Sende die Nachricht nur einmal für den Abschluss
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(50);
+    }
+
+    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
+    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
+        for (int i = 0; i < 2; i++) {
+            ws.textAll(progressMsg);
+            delay(100);  // Längerer Delay zwischen Nachrichten
+        }
+    } else {
+        ws.textAll(progressMsg);
+        delay(50);
+    }
+    
+    lastSentProgress = progress;
+}
+
+void handleUpdate(AsyncWebServer &server) {
+    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
+    updateHandler->setUri("/update");
+    updateHandler->setMethod(HTTP_POST);
+    
+    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
+                             size_t index, uint8_t *data, size_t len, bool final) {
+        if (!index) {
+            updateTotalSize = request->contentLength();
+            updateWritten = 0;
+            isSpiffsUpdate = (filename.indexOf("website") > -1);
+            
+            if (isSpiffsUpdate) {
+                // Backup vor dem Update
+                sendUpdateProgress(0, "backup", "Backing up configurations...");
+                delay(200);
+                backupJsonConfigs();
+                delay(200);
+                
+                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
+                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+                delay(200);
+            } else {
+                if (!Update.begin(updateTotalSize)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(0, "starting", "Starting firmware update...");
+                delay(200);
+            }
+        }
+
+        if (len) {
+            if (Update.write(data, len) != len) {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+                return;
+            }
+            
+            updateWritten += len;
+            int currentProgress;
+            
+            // Berechne den Fortschritt basierend auf dem Update-Typ
+            if (isSpiffsUpdate) {
+                // SPIFFS: 5-75% für Upload
+                currentProgress = 6 + (updateWritten * 100) / updateTotalSize;
+            } else {
+                // Firmware: 0-100% für Upload
+                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
+            }
+            
+            static int lastProgress = -1;
+            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
+                sendUpdateProgress(currentProgress, "uploading");
+                oledShowMessage("Update: " + String(currentProgress) + "%");
+                delay(50);
+                lastProgress = currentProgress;
+            }
+        }
+
+        if (final) {
+            if (Update.end(true)) {
+                if (isSpiffsUpdate) {
+                    restoreJsonConfigs();
+                }
+            } else {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
+            }
+        }
+    });
+
+    updateHandler->onRequest([](AsyncWebServerRequest *request) {
+        if (Update.hasError()) {
+            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
+            return;
+        }
+
+        // Erste 100% Nachricht
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        
+        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
+            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
+        response->addHeader("Connection", "close");
+        request->send(response);
+        
+        // Zweite 100% Nachricht zur Sicherheit
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        
+        espRestart();
+    });
+
+    server.addHandler(updateHandler);
+}

src/ota.h

@@ -0,0 +1,9 @@
+#ifndef OTA_H
+#define OTA_H
+
+#include <ArduinoOTA.h>
+#include <ESPAsyncWebServer.h>
+
+void handleUpdate(AsyncWebServer &server);
+
+#endif

src/scale.cpp

@@ -3,10 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
-#include <EEPROM.h>
 #include "display.h"
-#include "nfc.h"
 #include "esp_task_wdt.h"
+#include <Preferences.h>
 
 HX711 scale;
 
@@ -17,6 +16,11 @@ int16_t weight = 0;
 uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
+uint8_t scaleCalibrated = 1;
+
+Preferences preferences;
+const char* NVS_NAMESPACE = "scale";
+const char* NVS_KEY_CALIBRATION = "cal_value";
 
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
@@ -47,22 +51,24 @@ void scale_loop(void * parameter) {
   }
 }
 
-void start_scale() {
+uint8_t start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue; // calibration value (see example file "Calibration.ino")
-  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
+  long calibrationValue;
 
-  EEPROM.begin(512);
-  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
-
-  //calibrationValue = EEPROM.read(calVal_eepromAdress);
+  // NVS lesen
+  preferences.begin(NVS_NAMESPACE, true); // true = readonly
+  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
+  preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
 
   scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
 
-  if (isnan(calibrationValue) || calibrationValue < 1) calibrationValue = defaultScaleCalibrationValue;
+  if (isnan(calibrationValue) || calibrationValue < 1) {
+    calibrationValue = defaultScaleCalibrationValue;
+    scaleCalibrated = 0;
+  }
 
   oledShowMessage("Scale Tare Please remove all");
   for (uint16_t i = 0; i < 2000; i++) {
@@ -95,6 +101,8 @@ void start_scale() {
   } else {
       Serial.println("ScaleLoop-Task erfolgreich erstellt");
   }
+
+  return (scaleCalibrated == 1) ? 1 : 3;
 }
 
 uint8_t calibrate_scale() {
@@ -138,18 +146,19 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
-      Serial.print("Save this value to EEPROM adress ");
-      Serial.println(calVal_eepromAdress);
 
-      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.commit();
+      // Speichern mit NVS
+      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
+      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.end();
 
-      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
-      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
+      // Verifizieren
+      preferences.begin(NVS_NAMESPACE, true);
+      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      preferences.end();
 
-      Serial.print("Read Value ");
-      Serial.println(newCalibrationValue);
+      Serial.print("Verified stored value: ");
+      Serial.println(verifyValue);
 
       Serial.println("End calibration, revome weight");
 

src/scale.h

@@ -5,7 +5,7 @@
 #include "HX711.h"
 
 
-void start_scale();
+uint8_t start_scale();
 uint8_t calibrate_scale();
 uint8_t tareScale();
 
@@ -14,5 +14,8 @@ extern int16_t weight;
 extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
+extern uint8_t scaleCalibrated;
+
+extern TaskHandle_t ScaleTask;
 
 #endif

src/website.cpp

@@ -3,14 +3,20 @@
 #include "api.h"
 #include <ArduinoJson.h>
 #include <ESPAsyncWebServer.h>
-//#include <AsyncWebSocket.h>
 #include "bambu.h"
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
+#include <Update.h>
+#include "display.h"
+#include "ota.h"
+
+#ifndef VERSION
+  #define VERSION "1.1.0"
+#endif
 
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
+#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -18,6 +24,7 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
+
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
         Serial.println("Neuer Client verbunden!");
@@ -28,11 +35,15 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
+    } else if (type == WS_EVT_ERROR) {
+        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
+    } else if (type == WS_EVT_PONG) {
+        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
         deserializeJson(doc, message);
-        
+
         if (doc["type"] == "heartbeat") {
             // Sende Heartbeat-Antwort
             ws.text(client->id(), "{"
@@ -44,7 +55,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc.containsKey("payload")) {
+            if (doc["payload"].is<JsonObject>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -84,6 +95,15 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
             setBambuSpool(doc["payload"]);
         }
 
+        else if (doc["type"] == "setSpoolmanSettings") {
+            Serial.println(doc["payload"].as<String>());
+            if (updateSpoolBambuData(doc["payload"].as<String>())) {
+                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"success\"}");
+            } else {
+                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"error\"}");
+            }
+        }
+
         else {
             Serial.println("Unbekannter WebSocket-Typ: " + doc["type"].as<String>());
         }
@@ -93,12 +113,12 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
     Serial.println("Lade HTML-Datei: " + String(filename));
-    if (!SPIFFS.exists(filename)) {
+    if (!LittleFS.exists(filename)) {
         Serial.println("Fehler: Datei nicht gefunden!");
         return "Fehler: Datei nicht gefunden!";
     }
 
-    File file = SPIFFS.open(filename, "r");
+    File file = LittleFS.open(filename, "r");
     String html = file.readString();
     file.close();
 
@@ -151,11 +171,22 @@ void sendNfcData(AsyncWebSocketClient *client) {
 
 void sendAmsData(AsyncWebSocketClient *client) {
     if (ams_count > 0) {
-        ws.textAll("{\"type\":\"amsData\", \"payload\":" + amsJsonData + "}");
+        ws.textAll("{\"type\":\"amsData\",\"payload\":" + amsJsonData + "}");
     }
 }
 
 void setupWebserver(AsyncWebServer &server) {
+    // Deaktiviere alle Debug-Ausgaben
+    Serial.setDebugOutput(false);
+    
+    // WebSocket-Optimierungen
+    ws.onEvent(onWsEvent);
+    ws.enable(true);
+
+    // Konfiguriere Server für große Uploads
+    server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
+    server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
+
     // Lade die Spoolman-URL beim Booten
     spoolmanUrl = loadSpoolmanUrl();
     Serial.print("Geladene Spoolman-URL: ");
@@ -164,7 +195,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /about erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/about.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -173,7 +204,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für Waage
     server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /waage erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/waage.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -182,24 +213,13 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für RFID
     server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/rfid.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("RFID-Seite gesendet");
     });
 
-    /*
-    // Neue API-Route für das Abrufen der Spool-Daten
-    server.on("/api/spools", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("API-Aufruf: /api/spools");
-        JsonDocument spoolsData = fetchSpoolsForWebsite();
-        String response;
-        serializeJson(spoolsData, response);
-        request->send(200, "application/json", response);
-    });
-    */
-
     server.on("/api/url", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("API-Aufruf: /api/url");
         String jsonResponse = "{\"spoolman_url\": \"" + String(spoolmanUrl) + "\"}";
@@ -209,7 +229,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für WiFi
     server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /wifi erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -222,10 +242,12 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
+        {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
+            autoSendToBambu = doc["autoSendToBambu"].as<bool>();
             bambuIp.trim();
             bambuSerial.trim();
             bambuCode.trim();
@@ -233,7 +255,17 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuIp}}", bambuIp ? bambuIp : "");            
             html.replace("{{bambuSerial}}", bambuSerial ? bambuSerial : "");
             html.replace("{{bambuCode}}", bambuCode ? bambuCode : "");
-        }   
+            html.replace("{{autoSendToBambu}}", autoSendToBambu ? "checked" : "");
+            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
+        }
+        else
+        {
+            html.replace("{{bambuIp}}", "");
+            html.replace("{{bambuSerial}}", "");
+            html.replace("{{bambuCode}}", "");
+            html.replace("{{autoSendToBambu}}", "");
+            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
+        }
 
         request->send(200, "text/html", html);
     });
@@ -264,16 +296,20 @@ void setupWebserver(AsyncWebServer &server) {
         String bambu_ip = request->getParam("bambu_ip")->value();
         String bambu_serialnr = request->getParam("bambu_serialnr")->value();
         String bambu_accesscode = request->getParam("bambu_accesscode")->value();
+        bool autoSend = (request->getParam("autoSend")->value() == "true") ? true : false;
+        String autoSendTime = request->getParam("autoSendTime")->value();
+        
         bambu_ip.trim();
         bambu_serialnr.trim();
         bambu_accesscode.trim();
+        autoSendTime.trim();
 
         if (bambu_ip.length() == 0 || bambu_serialnr.length() == 0 || bambu_accesscode.length() == 0) {
             request->send(400, "application/json", "{\"success\": false, \"error\": \"Empty parameter\"}");
             return;
         }
 
-        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode);
+        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend, autoSendTime);
 
         request->send(200, "application/json", "{\"healthy\": " + String(success ? "true" : "false") + "}");
     });
@@ -286,7 +322,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für das Laden der CSS-Datei
     server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Lade style.css");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/style.css.gz", "text/css");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css.gz", "text/css");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -295,7 +331,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für das Logo
     server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/logo.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -304,7 +340,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für Favicon
     server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/favicon.ico", "image/x-icon");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("favicon.ico gesendet");
@@ -312,17 +348,26 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für spool_in.png
     server.on("/spool_in.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spool_in.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spool_in.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("spool_in.png gesendet");
     });
 
+    // Route für set_spoolman.png
+    server.on("/set_spoolman.png", HTTP_GET, [](AsyncWebServerRequest *request){
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/set_spoolman.png.gz", "image/png");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
+        Serial.println("set_spoolman.png gesendet");
+    });
+
     // Route für JavaScript Dateien
     server.on("/spoolman.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spoolman.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spoolman.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -331,13 +376,30 @@ void setupWebserver(AsyncWebServer &server) {
 
     server.on("/rfid.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS,"/rfid.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS,"/rfid.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("RFID.js gesendet");
     });
-    
+
+    // Vereinfachter Update-Handler
+    server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
+        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", "no-store");
+        request->send(response);
+    });
+
+    // Update-Handler registrieren
+    handleUpdate(server);
+
+    server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
+        String fm_version = VERSION;
+        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
+        request->send(200, "application/json", jsonResponse);
+    });
+
     // Fehlerbehandlung für nicht gefundene Seiten
     server.onNotFound([](AsyncWebServerRequest *request){
         Serial.print("404 - Nicht gefunden: ");

src/website.h

@@ -6,8 +6,8 @@
 #include "commonFS.h"
 #include "api.h"
 #include <ArduinoJson.h>
-#include <ESPAsyncWebServer.h>
-#include <AsyncWebSocket.h>
+#include <Update.h>
+#include <AsyncTCP.h>
 #include "bambu.h"
 #include "nfc.h"
 #include "scale.h"
@@ -17,7 +17,12 @@ extern String spoolmanUrl;
 extern AsyncWebServer server;
 extern AsyncWebSocket ws;
 
+// Server-Initialisierung und Handler
+void initWebServer();
+void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
+
+// WebSocket-Funktionen
 void sendAmsData(AsyncWebSocketClient *client);
 void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);

src/wlan.cpp

@@ -0,0 +1,129 @@
+#include <Arduino.h>
+#include "wlan.h"
+#include <WiFi.h>
+#include <esp_wifi.h>
+#include <WiFiManager.h>
+#include <DNSServer.h>
+#include <ESPmDNS.h>
+#include "display.h"
+#include "config.h"
+
+WiFiManager wm;
+bool wm_nonblocking = false;
+uint8_t wifiErrorCounter = 0;
+
+void wifiSettings() {
+    // Optimierte WiFi-Einstellungen
+    WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
+    WiFi.setSleep(false); // disable sleep mode
+    WiFi.setHostname("FilaMan");
+    esp_wifi_set_ps(WIFI_PS_NONE);
+    
+    // Maximale Sendeleistung
+    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
+  
+    // Optimiere TCP/IP Stack
+    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
+    
+    // Aktiviere WiFi-Roaming für bessere Stabilität
+    esp_wifi_set_rssi_threshold(-80);
+}
+
+void startMDNS() {
+  if (!MDNS.begin("filaman")) {
+    Serial.println("Error setting up MDNS responder!");
+    while(1) {
+      vTaskDelay(1000 / portTICK_PERIOD_MS);
+    }
+  }
+  Serial.println("mDNS responder started");
+}
+
+void configModeCallback (WiFiManager *myWiFiManager) {
+  Serial.println("Entered config mode");
+  oledShowTopRow();
+  oledShowMessage("WiFi Config Mode");
+}
+
+void initWiFi() {
+  // load Wifi settings
+  wifiSettings();
+
+  wm.setAPCallback(configModeCallback);
+
+  wm.setSaveConfigCallback([]() {
+    Serial.println("Configurations updated");
+    ESP.restart();
+  });
+
+  if(wm_nonblocking) wm.setConfigPortalBlocking(false);
+  //wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
+  wm.setWiFiAutoReconnect(true);
+  wm.setConnectTimeout(5);
+
+  oledShowTopRow();
+  oledShowMessage("WiFi Setup");
+  
+  //bool res = wm.autoConnect("FilaMan"); // anonymous ap
+  if(!wm.autoConnect("FilaMan")) {
+    Serial.println("Failed to connect or hit timeout");
+    // ESP.restart();
+    oledShowTopRow();
+    oledShowMessage("WiFi not connected Check Portal");
+  } 
+  else {
+    wifiOn = true;
+
+    //if you get here you have connected to the WiFi    
+    Serial.println("connected...yeey :)");
+    Serial.print("IP address: ");
+    Serial.println(WiFi.localIP());
+
+    oledShowTopRow();
+    display.display();
+
+    vTaskDelay(500 / portTICK_PERIOD_MS);
+
+    // mDNS
+    startMDNS();
+  }
+}
+
+void checkWiFiConnection() {
+  if (WiFi.status() != WL_CONNECTED) 
+  {
+    Serial.println("WiFi connection lost. Reconnecting...");
+    wifiOn = false;
+    oledShowTopRow();
+    oledShowMessage("WiFi reconnecting");
+    WiFi.reconnect(); // Versuche, die Verbindung wiederherzustellen
+    vTaskDelay(5000 / portTICK_PERIOD_MS); // Warte 5 Sekunden, bevor erneut geprüft wird
+    if (WiFi.status() != WL_CONNECTED) 
+    {
+      Serial.println("Failed to reconnect. Restarting WiFi...");
+      WiFi.disconnect();
+      Serial.println("WiFi disconnected.");
+      vTaskDelay(1000 / portTICK_PERIOD_MS);
+      wifiErrorCounter++;
+
+      //wifiSettings();
+      WiFi.reconnect();
+      Serial.println("WiFi reconnecting...");
+      WiFi.waitForConnectResult();
+    } 
+    else 
+    {
+      Serial.println("WiFi reconnected.");
+      wifiErrorCounter = 0;
+      wifiOn = true;
+      oledShowTopRow();
+      startMDNS();
+    }
+  }
+
+  if (wifiErrorCounter >= 5) 
+  {
+    Serial.println("Too many WiFi errors. Restarting...");
+    ESP.restart();
+  }
+}

src/wlan.h

@@ -0,0 +1,9 @@
+#ifndef WLAN_H
+#define WLAN_H
+
+#include <Arduino.h>
+
+void initWiFi();
+void checkWiFiConnection();
+
+#endif