Add JSON structure comments for filament and spool creation

src/api.cpp

@@ -13,6 +13,9 @@ bool sendOctoUpdate = false;
 String octoUrl = "";
 String octoToken = "";
 uint16_t remainingWeight = 0;
+uint16_t createdVendorId = 0;  // Store ID of newly created vendor
+uint16_t foundVendorId = 0;    // Store ID of found vendor
+uint16_t foundFilamentId = 0;  // Store ID of found filament
 bool spoolmanConnected = false;
 
 struct SendToApiParams {
@@ -114,6 +117,7 @@ void sendToApi(void *parameter) {
     int httpCode;
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
     else if (httpType == "POST") httpCode = http.POST(updatePayload);
+    else if (httpType == "GET") httpCode = http.GET();
     else httpCode = http.PUT(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
@@ -153,6 +157,58 @@ void sendToApi(void *parameter) {
                 oledShowProgressBar(5, 5, "Spool Tag", ("Done: " + String(remainingWeight) + " g remain").c_str());
                 remainingWeight = 0;
                 break;
+            case API_REQUEST_VENDOR_CREATE:
+                Serial.println("Vendor successfully created!");
+                createdVendorId = doc["id"].as<uint16_t>();
+                Serial.print("Created Vendor ID: ");
+                Serial.println(createdVendorId);
+                oledShowProgressBar(1, 1, "Vendor", "Created!");
+                break;
+            case API_REQUEST_VENDOR_CHECK:
+                if (doc.isNull() || doc.size() == 0) {
+                    Serial.println("Vendor not found in response");
+                    foundVendorId = 0;
+                } else {
+                    foundVendorId = doc[0]["id"].as<uint16_t>();
+                    Serial.print("Found Vendor ID: ");
+                    Serial.println(foundVendorId);
+                }
+                break;
+            case API_REQUEST_FILAMENT_CHECK:
+                if (doc.isNull() || doc.size() == 0) {
+                    Serial.println("Filament not found in response");
+                    foundFilamentId = 0;
+                } else {
+                    foundFilamentId = doc[0]["id"].as<uint16_t>();
+                    Serial.print("Found Filament ID: ");
+                    Serial.println(foundFilamentId);
+                }
+                break;
+            }
+        }
+        doc.clear();
+    } else if (httpCode == HTTP_CODE_CREATED) {
+        Serial.println("Spoolman erfolgreich erstellt");
+        
+        // Parse response for created resources
+        String payload = http.getString();
+        JsonDocument doc;
+        DeserializationError error = deserializeJson(doc, payload);
+        if (error) {
+            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
+            Serial.println(error.c_str());
+        } else {
+            switch(requestType){
+            case API_REQUEST_VENDOR_CREATE:
+                Serial.println("Vendor successfully created!");
+                createdVendorId = doc["id"].as<uint16_t>();
+                Serial.print("Created Vendor ID: ");
+                Serial.println(createdVendorId);
+                oledShowProgressBar(1, 1, "Vendor", "Created!");
+                break;
+            default:
+                // Handle other create operations if needed
+                break;
             }
         }
         doc.clear();
@@ -169,6 +225,9 @@ void sendToApi(void *parameter) {
         case API_REQUEST_BAMBU_UPDATE:
             oledShowProgressBar(1, 1, "Failure!", "Bambu update");
             break;
+        case API_REQUEST_VENDOR_CREATE:
+            oledShowProgressBar(1, 1, "Failure!", "Vendor create");
+            break;
         }
         Serial.println("Fehler beim Senden an Spoolman! HTTP Code: " + String(httpCode));
 
@@ -433,6 +492,238 @@ bool updateSpoolBambuData(String payload) {
     return true;
 }
 
+// #### Filament Fabrik
+uint16_t checkVendor(String vendor) {
+    // Check if vendor exists using task system
+    foundVendorId = 0; // Reset previous value
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor?name=" + vendor;
+    Serial.print("Check vendor with URL: ");
+    Serial.println(spoolsUrl);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return 0;
+    }
+    params->requestType = API_REQUEST_VENDOR_CHECK;
+    params->httpType = "GET";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = ""; // Empty for GET request
+
+    // Check if API is idle before creating task
+    if(spoolmanApiState == API_IDLE){
+        // Erstelle die Task
+        BaseType_t result = xTaskCreate(
+            sendToApi,                // Task-Funktion
+            "SendToApiTask",          // Task-Name
+            6144,                     // Stackgröße in Bytes
+            (void*)params,            // Parameter
+            0,                        // Priorität
+            NULL                      // Task-Handle (nicht benötigt)
+        );
+    } else {
+        Serial.println("Not spawning new task, API still active!");
+        delete params;
+        return 0;
+    }
+    
+    // Wait for task completion
+    while(spoolmanApiState != API_IDLE) {
+        vTaskDelay(100 / portTICK_PERIOD_MS);
+    }
+
+    // Check if vendor was found
+    if (foundVendorId == 0) {
+        Serial.println("Vendor not found, creating new vendor...");
+        uint16_t vendorId = createVendor(vendor);
+        if (vendorId == 0) {
+            Serial.println("Failed to create vendor, returning 0.");
+            return 0; // Failed to create vendor
+        } else {
+            Serial.println("Vendor created with ID: " + String(vendorId));
+            checkFilament(vendorId);
+            return vendorId;
+        }
+    } else {
+        Serial.println("Vendor found: " + vendor);
+        Serial.print("Vendor ID: ");
+        Serial.println(foundVendorId);
+        return foundVendorId;
+    }
+}
+
+uint16_t createVendor(String vendor) {
+    // Create new vendor in Spoolman database using task system
+    // Note: Due to async nature, the ID will be stored in createdVendorId global variable
+    createdVendorId = 0; // Reset previous value
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/vendor";
+    Serial.print("Create vendor with URL: ");
+    Serial.println(spoolsUrl);
+
+    // Create JSON payload for vendor creation
+    JsonDocument vendorDoc;
+    vendorDoc["name"] = vendor;
+    vendorDoc["comment"] = "automatically generated";
+    vendorDoc["empty_spool_weight"] = 180;
+    vendorDoc["external_id"] = vendor;
+
+    String vendorPayload;
+    serializeJson(vendorDoc, vendorPayload);
+    Serial.print("Vendor Payload: ");
+    Serial.println(vendorPayload);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        vendorDoc.clear();
+        return 0;
+    }
+    params->requestType = API_REQUEST_VENDOR_CREATE;
+    params->httpType = "POST";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = vendorPayload;
+
+    // Check if API is idle before creating task
+    if(spoolmanApiState == API_IDLE){
+        // Erstelle die Task
+        BaseType_t result = xTaskCreate(
+            sendToApi,                // Task-Funktion
+            "SendToApiTask",          // Task-Name
+            6144,                     // Stackgröße in Bytes
+            (void*)params,            // Parameter
+            0,                        // Priorität
+            NULL                      // Task-Handle (nicht benötigt)
+        );
+    } else {
+        Serial.println("Not spawning new task, API still active!");
+        delete params;
+        vendorDoc.clear();
+        return 0;
+    }
+
+    vendorDoc.clear();
+    
+    // Wait for task completion and return the created vendor ID
+    // Note: createdVendorId will be set by sendToApi when response is received
+    while(spoolmanApiState != API_IDLE) {
+        vTaskDelay(100 / portTICK_PERIOD_MS);
+    }
+    
+    return createdVendorId;
+}
+
+uint16_t checkFilament(uint16_t vendorId) {
+    // Check if filament exists using task system
+    foundFilamentId = 0; // Reset previous value
+    
+    String spoolsUrl = spoolmanUrl + apiUrl + "/filament?vendor.id=" + String(vendorId);
+    Serial.print("Check filament with URL: ");
+    Serial.println(spoolsUrl);
+
+    SendToApiParams* params = new SendToApiParams();
+    if (params == nullptr) {
+        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
+        return 0;
+    }
+    params->requestType = API_REQUEST_FILAMENT_CHECK;
+    params->httpType = "GET";
+    params->spoolsUrl = spoolsUrl;
+    params->updatePayload = ""; // Empty for GET request
+
+    // Check if API is idle before creating task
+    if(spoolmanApiState == API_IDLE){
+        // Erstelle die Task
+        BaseType_t result = xTaskCreate(
+            sendToApi,                // Task-Funktion
+            "SendToApiTask",          // Task-Name
+            6144,                     // Stackgröße in Bytes
+            (void*)params,            // Parameter
+            0,                        // Priorität
+            NULL                      // Task-Handle (nicht benötigt)
+        );
+    } else {
+        Serial.println("Not spawning new task, API still active!");
+        delete params;
+        return 0;
+    }
+    
+    // Wait for task completion
+    while(spoolmanApiState != API_IDLE) {
+        vTaskDelay(100 / portTICK_PERIOD_MS);
+    }
+
+    // Check if filament was found
+    if (foundFilamentId == 0) {
+        Serial.println("Filament not found, creating new filament...");
+        uint16_t filamentId = createFilament();
+        if (filamentId == 0) {
+            Serial.println("Failed to create filament, returning 0.");
+            return 0; // Failed to create filament
+        } else {
+            Serial.println("Filament created with ID: " + String(filamentId));
+            checkSpool();
+            return filamentId;
+        }
+    } else {
+        Serial.println("Filament found for vendor ID: " + String(vendorId));
+        Serial.print("Filament ID: ");
+        Serial.println(foundFilamentId);
+        return foundFilamentId;
+    }
+}
+
+bool createFilament() {
+    // {
+    //     "name": "PolyTerra Charcoal Black",
+    //     "vendor_id": 0,
+    //     "material": "PLA",
+    //     "price": 20,
+    //     "density": 1.24,
+    //     "diameter": 1.75,
+    //     "weight": 1000,
+    //     "spool_weight": 140,
+    //     "article_number": "PM70820",
+    //     "comment": "automatically generated",
+    //     "settings_extruder_temp": 210,
+    //     "settings_bed_temp": 60,
+    //     "color_hex": "FF0000",
+    //     "multi_color_hexes": "FF0000,00FF00,0000FF",
+    //     "multi_color_direction": "coaxial",
+    //     "external_id": "polymaker_pla_polysonicblack_1000_175",
+    //     "extra": {
+    //         "nozzle_temperature": "string"
+    //     }
+    // }
+
+}
+
+uint16_t checkSpool() {
+
+}
+
+bool createSpool() {
+    // Implement specific handling for Spool creation
+    // {
+    //     "first_used": "2019-08-24T14:15:22Z",
+    //     "last_used": "2019-08-24T14:15:22Z",
+    //     "filament_id": 0,
+    //     "price": 20,
+    //     "initial_weight": 200,
+    //     "spool_weight": 200,
+    //     "remaining_weight": 800,
+    //     "used_weight": 200,
+    //     "location": "Shelf A",
+    //     "lot_nr": "52342",
+    //     "comment": "",
+    //     "archived": false,
+    //     "extra": {
+    //         "nfc_id": "string"
+    //     }
+    // }
+}
+
 // #### Spoolman init
 bool checkSpoolmanExtraFields() {
     HTTPClient http;

src/api.h

@@ -17,7 +17,10 @@ typedef enum {
     API_REQUEST_BAMBU_UPDATE,
     API_REQUEST_SPOOL_TAG_ID_UPDATE,
     API_REQUEST_SPOOL_WEIGHT_UPDATE,
-    API_REQUEST_SPOOL_LOCATION_UPDATE
+    API_REQUEST_SPOOL_LOCATION_UPDATE,
+    API_REQUEST_VENDOR_CREATE,
+    API_REQUEST_VENDOR_CHECK,
+    API_REQUEST_FILAMENT_CHECK
 } SpoolmanApiRequestType;
 
 extern volatile spoolmanApiStateType spoolmanApiState;
@@ -27,6 +30,9 @@ extern bool octoEnabled;
 extern bool sendOctoUpdate;
 extern String octoUrl;
 extern String octoToken;
+extern uint16_t createdVendorId;  // ID of newly created vendor
+extern uint16_t foundVendorId;    // ID of found vendor
+extern uint16_t foundFilamentId;  // ID of found filament
 extern bool spoolmanConnected;
 
 bool checkSpoolmanInstance(const String& url);
@@ -40,5 +46,12 @@ uint8_t updateSpoolLocation(String spoolId, String location);
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
 bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
 bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
+uint16_t checkVendor(String vendor); // Check if vendor exists, return ID
+uint16_t createVendor(String vendor); // Create vendor, return ID
+uint16_t checkFilament(); // Check if filament exists, return ID
+bool createFilament(); // Create filament
+uint16_t checkSpool(); // Check if spool exists, return ID
+bool createSpool(); // Create spool
+void createFilamentFabrik(JsonDocument payload);
 
 #endif

src/nfc.cpp

@@ -37,6 +37,11 @@ volatile nfcReaderStateType nfcReaderState = NFC_IDLE;
 // ***** PN532
 
 
+// ##### Recycling Fabrik #####
+bool isRecyclingFabrik(const char* brand) {
+    return strcmp(brand, "Recycling Fabrik") == 0;
+}
+
 // ##### Funktionen für RFID #####
 void payloadToJson(uint8_t *data) {
     const char* startJson = strchr((char*)data, '{');
@@ -58,6 +63,12 @@ void payloadToJson(uint8_t *data) {
         int max_temp = doc["max_temp"];
         const char* brand = doc["brand"];
 
+        // Recycling Fabrik
+        if (isRecyclingFabrik(brand)) {
+          // TODO: Implement specific handling for Recycling Fabrik
+          Serial.println("Recycling Fabrik erkannt.");
+        }
+
         Serial.println();
         Serial.println("-----------------");
         Serial.println("JSON-Parsed Data:");
@@ -215,7 +226,7 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage) {
   }
 
   // JSON-Dokument verarbeiten
-  JsonDocument doc;  // Passen Sie die Größe an den JSON-Inhalt an
+  JsonDocument doc;
   DeserializationError error = deserializeJson(doc, nfcJsonData);
   if (error) 
   {
@@ -232,7 +243,7 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage) {
       // Sende die aktualisierten AMS-Daten an alle WebSocket-Clients
       Serial.println("JSON-Dokument erfolgreich verarbeitet");
       Serial.println(doc.as<String>());
-      if (doc["sm_id"].is<String>() && doc["sm_id"] != "") 
+      if (doc["sm_id"].is<String>() && doc["sm_id"] != "" && doc["sm_id"] != "0")
       {
         oledShowProgressBar(2, octoEnabled?5:4, "Spool Tag", "Weighing");
         Serial.println("SPOOL-ID gefunden: " + doc["sm_id"].as<String>());
@@ -254,6 +265,13 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage) {
           oledShowProgressBar(1, 1, "Failure", "Scan spool first");
         }
       }
+      // Recycling Fabrik
+      else if (isRecyclingFabrik(doc["type"].as<String>().c_str())) {
+        // If no sm_id is present but the brand is Recycling Fabrik then
+        // create a new spool, maybe brand too, in Spoolman
+        Serial.println("Recycling Fabrik Tag found!");
+        createFilamentFabrik(doc);
+      }
       else 
       {
         Serial.println("Keine SPOOL-ID gefunden.");