chore: increment version to 1.0.7 in platformio.ini

.github/workflows/release.yml

@@ -0,0 +1,77 @@
+name: Create Release
+
+on:
+  push:
+    tags:
+      - 'v*'
+
+permissions:
+  contents: write      # Required for creating releases
+  issues: read        # Required for reading changelog
+  pull-requests: read # Required for reading changelog
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write # Required for creating releases at job level
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
+    - name: Build Firmware
+      run: |
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
+        
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
+      run: |
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+    
+    - name: Install and Configure GitHub CLI
+      run: |
+        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
+        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
+        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
+        && sudo apt update \
+        && sudo apt install gh -y
+        
+    - name: Create Release with GitHub CLI
+      env:
+        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}  # Changed from GITHUB_TOKEN to GH_TOKEN
+      run: |
+        gh release create "${{ github.ref_name }}" \
+          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
+          --notes "${{ steps.changelog.outputs.CHANGES }}" \
+          ".pio/build/esp32dev/filaman.bin#filaman.bin"

CHANGELOG.md

@@ -0,0 +1,36 @@
+# Changelog
+
+## [1.0.5] - 2025-02-16
+### Added
+- update version to 1.0.5 and enhance changelog update process with automatic git push
+- update changelog script to categorize commits and handle new changelog creation
+- improve changelog update script to handle absolute paths and create new changelog if missing
+
+
+## [1.0.4] - 2025-02-16
+### Added
+- improve changelog update script to handle absolute paths and create new changelog if missing
+
+
+## [1.0.3] - 2025-02-16
+### Added
+- 
+
+### Changed
+-
+
+### Fixed
+-
+
+## [1.0.2] - 2025-02-16
+### Added
+- Feature 1
+- Feature 2
+
+### Changed
+- Change 1
+- Change 2
+
+### Fixed
+- Fix 1
+- Fix 2

README.de.md

@@ -0,0 +1,155 @@
+# FilaMan - Filament Management System
+
+FilaMan ist ein Filament-Managementsystem für den 3D-Druck. Es verwendet ESP32-Hardware für Gewichtsmessungen und NFC-Tag-Management. 
+Benutzer können Filamentspulen verwalten, den Status des Automatic Material System (AMS) von Bablulab Druckern überwachen und Einstellungen über eine Weboberfläche vornehmen. 
+Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/Spoolman) Filamentverwaltung, zusätzlich mit [Bambulab](https://bambulab.com/en-us) 3D-Druckern und sowie dem [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG Format.
+
+![Scale](./img/scale_trans.png)
+
+Weitere Bilder finden Sie im [img Ordner](/img/)  
+oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
+Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+
+### ESP32 Hardware-Funktionen
+- **Gewichtsmessung:** Verwendung einer Wägezelle mit HX711-Verstärker für präzise Gewichtsverfolgung.
+- **NFC-Tag Lesen/Schreiben:** PN532-Modul zum Lesen und Schreiben von Filamentdaten auf NFC-Tags.
+- **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
+- **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
+- **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
+- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+
+### Weboberflächen-Funktionen
+- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
+- **NFC-Tag-Verwaltung:** 
+    - Filamentdaten auf NFC-Tags schreiben.
+    - Verwendet das NFC-Tag-Format von [Openspool](https://github.com/spuder/OpenSpool)
+    - Ermöglicht automatische Spulenerkennung im AMS
+- **Bambulab AMS-Integration:** 
+  - Anzeige der aktuellen AMS-Fachbelegung.
+  - Zuordnung von Filamenten zu AMS-Slots.
+  - Unterstützung für externe Spulenhalter.
+- **Spoolman-Integration:**
+  - Auflistung verfügbarer Filamentspulen.
+  - Filtern und Auswählen von Filamenten.
+  - Automatische Aktualisierung der Spulengewichte.
+  - Verfolgung von NFC-Tag-Zuweisungen.
+
+### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
+
+## Detaillierte Funktionalität
+
+### ESP32-Funktionalität
+- **Druckaufträge steuern und überwachen:** Der ESP32 kommuniziert mit dem Bambu Lab Drucker.
+- **Drucker-Kommunikation:** Nutzt MQTT für Echtzeit-Kommunikation mit dem Drucker.
+- **Benutzerinteraktionen:** Das OLED-Display bietet sofortiges Feedback zum Systemstatus.
+
+### Weboberflächen-Funktionalität
+- **Benutzerinteraktionen:** Die Weboberfläche ermöglicht Benutzern die Interaktion mit dem System.
+- **UI-Elemente:** Enthält Dropdown-Menüs für Hersteller und Filamente, Buttons zum Beschreiben von NFC-Tags und Echtzeit-Statusanzeigen.
+
+## Hardware-Anforderungen
+
+### Komponenten
+- **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
+[Amazon Link](https://amzn.eu/d/aXThslf)
+- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
+[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+- **OLED Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/dozAYDU)
+- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
+[Amazon Link](https://amzn.eu/d/8205DDh)
+- **NFC-Tag:** NTAG215
+[Amazon Link](https://amzn.eu/d/fywy4c4)
+
+### Pin-Konfiguration
+| Komponente        | ESP32 Pin |
+|-------------------|-----------|
+| HX711 DOUT        | 16        |
+| HX711 SCK         | 17        |
+| OLED SDA          | 21        |
+| OLED SCL          | 22        |
+| PN532 IRQ         | 32        |
+| PN532 RESET       | 33        |
+| PN532 SCK         | 14        |
+| PN532 MOSI        | 13        |
+| PN532 MISO        | 12        |
+| PN532 CS/SS       | 15        |
+
+## Software-Abhängigkeiten
+
+### ESP32-Bibliotheken
+- `WiFiManager`: Netzwerkkonfiguration
+- `ESPAsyncWebServer`: Webserver-Funktionalität
+- `ArduinoJson`: JSON-Verarbeitung
+- `PubSubClient`: MQTT-Kommunikation
+- `Adafruit_PN532`: NFC-Funktionalität
+- `Adafruit_SSD1306`: OLED-Display-Steuerung
+- `HX711`: Wägezellen-Kommunikation
+
+## Installation
+
+### Voraussetzungen
+- **Software:**
+  - [PlatformIO](https://platformio.org/) in VS Code
+  - [Spoolman](https://github.com/Donkie/Spoolman) Instanz
+- **Hardware:**
+  - ESP32 Entwicklungsboard
+  - HX711 Wägezellen-Verstärker
+  - Wägezelle (Gewichtssensor)
+  - OLED Display (128x64 SSD1306)
+  - PN532 NFC Modul
+  - Verbindungskabel
+
+### Schritt-für-Schritt Installation
+1. **Repository klonen:**
+    ```bash
+    git clone https://github.com/ManuelW77/Filaman.git
+    cd FilaMan
+    ```
+2. **Abhängigkeiten installieren:**
+    ```bash
+    pio lib install
+    ```
+3. **ESP32 flashen:**
+    ```bash
+    pio run --target upload
+    ```
+4. **Ersteinrichtung:**
+    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
+    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
+    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
+
+## Dokumentation
+
+### Relevante Links
+- [PlatformIO Dokumentation](https://docs.platformio.org/)
+- [Spoolman Dokumentation](https://github.com/Donkie/Spoolman)
+- [Bambu Lab Drucker Dokumentation](https://www.bambulab.com/)
+
+### Tutorials und Beispiele
+- [PlatformIO erste Schritte](https://docs.platformio.org/en/latest/tutorials/espressif32/arduino_debugging_unit_testing.html)
+- [ESP32 Webserver Tutorial](https://randomnerdtutorials.com/esp32-web-server-arduino-ide/)
+
+## Lizenz
+
+Dieses Projekt ist unter der MIT-Lizenz lizenziert. Siehe [LICENSE](LICENSE) Datei für Details.
+
+## Materialien
+
+### Nützliche Ressourcen
+- [ESP32 Offizielle Dokumentation](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/)
+- [Arduino Bibliotheken](https://www.arduino.cc/en/Reference/Libraries)
+- [NFC Tag Informationen](https://learn.adafruit.com/adafruit-pn532-rfid-nfc/overview)
+
+### Community und Support
+- [PlatformIO Community](https://community.platformio.org/)
+- [Arduino Forum](https://forum.arduino.cc/)
+- [ESP32 Forum](https://www.esp32.com/)
+
+## Verfügbarkeit
+
+Der Code kann getestet und die Anwendung kann vom [GitHub Repository](https://github.com/ManuelW77/Filaman) heruntergeladen werden.
+
+### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>

README.md

@@ -1,5 +1,7 @@
 # FilaMan - Filament Management System
 
+[Deutsche Version](README.de.md)
+
 FilaMan is a filament management system for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management. 
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.

create_combined_binary.py

@@ -1,68 +0,0 @@
-Import("env")
-from os.path import join, exists
-import shutil
-import os
-
-def combine_binaries(source, target, env):
-    # Define paths for binary files
-    build_dir = env.subst("$BUILD_DIR")
-    project_dir = env.subst("$PROJECT_DIR")
-    combined_bin = join(build_dir, "combined.bin")
-    firmware_bin = join(build_dir, "firmware.bin")
-    spiffs_bin = join(build_dir, "spiffs.bin")
-    
-    # Define target firmware path
-    firmware_dir = join(project_dir, "firmware")
-    target_firmware = join(firmware_dir, "filaman.bin")
-
-    # Build firmware if it doesn't exist
-    if not exists(firmware_bin):
-        print("Building firmware...")
-        env.Execute("pio run -t buildprog")
-
-    # Build SPIFFS if it doesn't exist
-    if not exists(spiffs_bin):
-        print("Building SPIFFS image...")
-        env.Execute("pio run -t buildfs")
-
-    # Check if files exist after build attempts
-    if not exists(firmware_bin):
-        raise Exception("Firmware binary not found at: " + firmware_bin)
-    
-    if not exists(spiffs_bin):
-        raise Exception("SPIFFS binary not found at: " + spiffs_bin)
-
-    print("Found firmware at:", firmware_bin)
-    print("Found SPIFFS at:", spiffs_bin)
-
-    # Command to merge firmware and SPIFFS
-    merge_command = (
-        "esptool.py --chip esp32 merge_bin -o {combined_bin} "
-        "--flash_mode dio --flash_freq 40m --flash_size 4MB "
-        "0x10000 {firmware_bin} 0x310000 {spiffs_bin}"
-    ).format(
-        combined_bin=combined_bin,
-        firmware_bin=firmware_bin,
-        spiffs_bin=spiffs_bin
-    )
-    
-    print("Executing merge command:", merge_command)
-    env.Execute(merge_command)
-
-    # Create firmware directory if it doesn't exist
-    if not exists(firmware_dir):
-        os.makedirs(firmware_dir)
-
-    # Move combined binary to target location
-    print(f"Moving combined binary to {target_firmware}")
-    shutil.copy2(combined_bin, target_firmware)
-    print(f"Binary successfully moved to {target_firmware}")
-
-# Register the custom target with explicit dependencies
-env.AddCustomTarget(
-    name="combine_binaries",
-    dependencies=["buildfs", "buildprog"],
-    actions=[combine_binaries],
-    title="Combine Firmware & SPIFFS",
-    description="Combines firmware.bin and spiffs.bin into a single binary"
-)

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan</h1>
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -32,3 +32,4 @@
             <div class="ram-status" id="ramStatus"></div>
         </div>
     </div>
+

html/index.html

@@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
 
     <div class="container">
         <h1>FilaMan</h1>

html/rfid.html

@@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
 <div class="connection-status hidden">
     <div class="spinner"></div>
     <span>Connection lost. Trying to reconnect...</span>

html/rfid.js

@@ -112,9 +112,39 @@ function initWebSocket() {
                 
                 if (bambuDot) {
                     bambuDot.className = 'status-dot ' + (data.bambu_connected ? 'online' : 'offline');
+                    // Add click handler only when offline
+                    if (!data.bambu_connected) {
+                        bambuDot.style.cursor = 'pointer';
+                        bambuDot.onclick = function() {
+                            if (socket && socket.readyState === WebSocket.OPEN) {
+                                socket.send(JSON.stringify({
+                                    type: 'reconnect',
+                                    payload: 'bambu'
+                                }));
+                            }
+                        };
+                    } else {
+                        bambuDot.style.cursor = 'default';
+                        bambuDot.onclick = null;
+                    }
                 }
                 if (spoolmanDot) {
                     spoolmanDot.className = 'status-dot ' + (data.spoolman_connected ? 'online' : 'offline');
+                    // Add click handler only when offline
+                    if (!data.spoolman_connected) {
+                        spoolmanDot.style.cursor = 'pointer';
+                        spoolmanDot.onclick = function() {
+                            if (socket && socket.readyState === WebSocket.OPEN) {
+                                socket.send(JSON.stringify({
+                                    type: 'reconnect',
+                                    payload: 'spoolman'
+                                }));
+                            }
+                        };
+                    } else {
+                        spoolmanDot.style.cursor = 'default';
+                        spoolmanDot.onclick = null;
+                    }
                 }
                 if (ramStatus) {
                     ramStatus.textContent = `${data.freeHeap}k`;
@@ -209,16 +239,6 @@ function updateNfcInfo() {
         `${spool.id} | ${spool.filament.name} (${spool.filament.material})` === selectedText
     );
 
-    if (selectedSpool && selectedSpool.extra.nfc_id) {
-        nfcInfo.textContent = "NFC Tag assigned";
-        nfcInfo.classList.add("nfc-success");
-        nfcInfo.classList.remove("nfc-error");
-    } else {
-        nfcInfo.textContent = "No NFC-Tag assigned";
-        nfcInfo.classList.add("nfc-error");
-        nfcInfo.classList.remove("nfc-success");
-    }
-
     if (selectedSpool) {
         writeButton.classList.remove("hidden");
     } else {
@@ -236,7 +256,7 @@ function displayAmsData(amsData) {
         
         const trayHTML = ams.tray.map(tray => {
             // Prüfe ob überhaupt Daten vorhanden sind
-            const relevantFields = ['tray_type', 'tray_sub_brands', 'tray_info_idx', 'setting_id'];
+            const relevantFields = ['tray_type', 'tray_sub_brands', 'tray_info_idx', 'setting_id', 'cali_idx'];
             const hasAnyContent = relevantFields.some(field => 
                 tray[field] !== null && 
                 tray[field] !== undefined && 
@@ -293,7 +313,8 @@ function displayAmsData(amsData) {
             const trayProperties = [
                 { key: 'tray_sub_brands', label: 'Sub Brands' },
                 { key: 'tray_info_idx', label: 'Filament IDX' },
-                { key: 'setting_id', label: 'Setting ID' }
+                { key: 'setting_id', label: 'Setting ID' },
+                { key: 'cali_idx', label: 'Calibration IDX' }
             ];
 
             // Nur gültige Felder anzeigen
@@ -304,7 +325,13 @@ function displayAmsData(amsData) {
                     tray[prop.key] !== '' &&
                     tray[prop.key] !== 'null'
                 )
-                .map(prop => `<p>${prop.label}: ${tray[prop.key]}</p>`)
+                .map(prop => {
+                    // Spezielle Behandlung für setting_id
+                    if (prop.key === 'cali_idx' && tray[prop.key] === '-1') {
+                        return `<p>${prop.label}: not calibrated</p>`;
+                    }
+                    return `<p>${prop.label}: ${tray[prop.key]}</p>`;
+                })
                 .join('');
 
             // Temperaturen nur anzeigen, wenn beide nicht 0 sind
@@ -417,12 +444,22 @@ function handleSpoolIn(amsId, trayId) {
             nozzle_temp_max: parseInt(maxTemp),
             type: selectedSpool.filament.material,
             brand: selectedSpool.filament.vendor.name,
-            tray_info_idx: selectedSpool.filament.extra.bambu_idx.replace(/['"]+/g, '').trim()
+            tray_info_idx: selectedSpool.filament.extra.bambu_idx.replace(/['"]+/g, '').trim(),
+            cali_idx: "-1"  // Default-Wert setzen
         }
     };
 
-    // Debug logging
-    console.log("Sende WebSocket Nachricht:", payload);
+    // Prüfe, ob der Key cali_idx vorhanden ist und setze ihn
+    if (selectedSpool.filament.extra.bambu_cali_id) {
+        payload.payload.cali_idx = selectedSpool.filament.extra.bambu_cali_id.replace(/['"]+/g, '').trim();
+    }
+
+    // Prüfe, ob der Key bambu_setting_id vorhanden ist
+    if (selectedSpool.filament.extra.bambu_setting_id) {
+        payload.payload.bambu_setting_id = selectedSpool.filament.extra.bambu_setting_id.replace(/['"]+/g, '').trim();
+    }
+
+    console.log("Spool-In Payload:", payload);
 
     try {
         socket.send(JSON.stringify(payload));
@@ -479,7 +516,7 @@ function updateNfcData(data) {
             }
 
         } else {
-            nfcDataDiv.innerHTML = '<div style="margin-top: 10px;"></div>';
+            nfcDataDiv.innerHTML = '<div class="info-message-inner" style="margin-top: 10px;"></div>';
         }
         nfcStatusContainer.appendChild(nfcDataDiv);
         return;

html/spoolman.html

@@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
     <script>
         window.onload = function() {
             if (spoolmanUrl && spoolmanUrl.trim() !== "") {

html/spoolman.js

@@ -86,6 +86,7 @@ function populateVendorDropdown(data, selectedSmId = null) {
     });
 
     // Nach der Schleife: Formatierung der Gesamtlänge
+    console.log("Total Lenght: ", totalLength);
     const formattedLength = totalLength > 1000 
         ? (totalLength / 1000).toFixed(2) + " km" 
         : totalLength.toFixed(2) + " m";

html/style.css

@@ -133,6 +133,15 @@ body {
     background-color: #dc2626;
 }
 
+.status-dot.offline {
+    cursor: pointer;
+}
+
+.status-dot.offline:hover {
+    opacity: 0.8;
+    transform: scale(1.1);
+}
+
 .ram-status { 
     color: var(--inner-text-color);
     font-size: 0.9em;
@@ -471,11 +480,15 @@ a:hover {
 
 .info-message {
     padding: 10px;
-    background-color: #fff3f3;
+    background-color: var(--header-bg);
     border-radius: 4px;
     border-left: 4px solid #39d82e;
 }
 
+.info-message-inner {
+    background-color: var(--header-bg) !important;
+}
+
 .nfc-header {
     display: grid;
     grid-template-columns: 40px 1fr 40px;
@@ -993,4 +1006,11 @@ input[type="submit"]:disabled,
 
 .spool-button:hover {
     opacity: 0.8;
+}
+
+.version {
+    font-size: 0.4em;
+    color: #000;
+    vertical-align: middle;
+    margin-left: 0.5rem;
 }

html/waage.html

@@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
     <div class="content">
         <h1>Scale Configuration Page</h1>
         

html/wifi.html

@@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
     <div class="content">
         <h1>WiFi Configuration Page</h1>
         <form action="/setToken" method="post">

partitions.csv

@@ -1,6 +1,5 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     0x9000,  0x4000,
-otadata,  data, ota,     0xd000,  0x2000,
-app0,     app,  ota_0,   0x10000, 0x180000,
-app1,     app,  ota_1,   0x190000,0x180000,
-spiffs,   data, spiffs,  0x310000,0x0F0000,
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x280000,
+spiffs,   data, spiffs,  0x290000,0x170000,

platformio.ini

@@ -8,6 +8,9 @@
 ; Please visit documentation for the other options and examples
 ; https://docs.platformio.org/page/projectconf.html
 
+[common]
+version = "1.0.7"
+
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -16,7 +19,8 @@ monitor_speed = 115200
 
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
-    me-no-dev/ESP Async WebServer @ ^1.2.4
+    #me-no-dev/ESP Async WebServer @ ^1.2.4
+    https://github.com/me-no-dev/ESPAsyncWebServer.git#master
     me-no-dev/AsyncTCP @ ^1.1.1
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
@@ -27,12 +31,10 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-board_build.partitions = partitions.csv
 board_build.filesystem = spiffs
-board_upload.flash_size = 4MB
-board_build.spiffs_create = yes
 board_build.spiffs.partition = 2M
 board_build.spiffs.upload_size = 2M
+board_build.partitions = partitions.csv
 
 build_flags = 
     -Os
@@ -40,18 +42,12 @@ build_flags =
     -fdata-sections
     -DNDEBUG
     -mtext-section-literals
+    '-D VERSION="${common.version}"'
 
 extra_scripts = 
-    pre:gzip_files.py
-    pre:extra_script.py
-    post:$PROJECT_DIR/create_combined_binary.py
-
-# Add custom target for combining binaries
-custom_targets = 
-    combine_binaries
-
-# Define the build sequence
-targets = 
-    buildfs     # Build SPIFFS image
-    buildprog   # Build firmware
-    #combine_binaries  # Combine both binaries
+    pre:scripts/combine_html.py
+    pre:scripts/pre_build.py
+    pre:scripts/pre_spiffs.py
+    pre:scripts/gzip_files.py
+    pre:scripts/extra_script.py
+    pre:scripts/update_changelog.py

scripts/combine_html.py

@@ -0,0 +1,31 @@
+Import("env")
+import os
+
+def combine_html_files(source, target, env):
+    html_dir = "./html"
+    header_file = os.path.join(html_dir, "header.html")
+    
+    # Read header content
+    with open(header_file, 'r') as f:
+        header_content = f.read()
+    
+    # Process all HTML files except header.html
+    for filename in os.listdir(html_dir):
+        if filename.endswith('.html') and filename != 'header.html':
+            file_path = os.path.join(html_dir, filename)
+            
+            # Read content
+            with open(file_path, 'r') as f:
+                content = f.read()
+            
+            # Replace placeholder with header content
+            if '{{header}}' in content:
+                new_content = content.replace('{{header}}', header_content)
+                
+                # Write back combined content
+                with open(file_path, 'w') as f:
+                    f.write(new_content)
+                print(f"Combined header with {filename}")
+
+# Register the script to run before building SPIFFS
+env.AddPreAction("buildfs", combine_html_files)

scripts/gzip_files.py

@@ -14,7 +14,7 @@ def copy_file(input_file, output_file):
 
 def should_compress(file):
     # Komprimiere nur bestimmte Dateitypen
-    return file.endswith(('.js', '.png', '.css'))
+    return file.endswith(('.js', '.png', '.css', '.html'))
 
 def main(source_dir, target_dir):
     for root, dirs, files in os.walk(source_dir):

scripts/pre_build.py

@@ -0,0 +1,25 @@
+Import("env")
+import os
+
+def replace_version(source, target, env):
+    # Get version from common section
+    version = env.GetProjectConfig().get("common", "version").strip('"')
+    header_file = "./html/header.html"
+    
+    with open(header_file, 'r') as file:
+        content = file.read()
+    
+    # Replace version in header.html using string manipulation instead of regex
+    search = '<h1>FilaMan<span class="version">v'
+    end = '</span>'
+    start_pos = content.find(search)
+    if start_pos != -1:
+        start_pos += len(search)
+        end_pos = content.find(end, start_pos)
+        if end_pos != -1:
+            content = content[:start_pos] + version + content[end_pos:]
+    
+    with open(header_file, 'w') as file:
+        file.write(content)
+
+env.AddPreAction("buildfs", replace_version)

scripts/pre_spiffs.py

@@ -0,0 +1,7 @@
+Import("env")
+
+# Wiederverwendung der replace_version Funktion
+exec(open("./scripts/pre_build.py").read())
+
+# Bind to SPIFFS build
+env.AddPreAction("buildfs", replace_version)

scripts/update_changelog.py

@@ -0,0 +1,132 @@
+import os
+import re
+import subprocess
+from datetime import datetime
+
+def get_version():
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    project_dir = os.path.dirname(script_dir)
+    platformio_path = os.path.join(project_dir, 'platformio.ini')
+    
+    with open(platformio_path, 'r') as f:
+        content = f.read()
+        version_match = re.search(r'version\s*=\s*"([^"]+)"', content)
+        return version_match.group(1) if version_match else None
+
+def get_last_tag():
+    try:
+        result = subprocess.run(['git', 'describe', '--tags', '--abbrev=0'], 
+                              capture_output=True, text=True)
+        return result.stdout.strip()
+    except subprocess.CalledProcessError:
+        return None
+
+def categorize_commit(commit_msg):
+    """Categorize commit messages based on conventional commits"""
+    lower_msg = commit_msg.lower()
+    if any(x in lower_msg for x in ['feat', 'add', 'new']):
+        return 'Added'
+    elif any(x in lower_msg for x in ['fix', 'bug']):
+        return 'Fixed'
+    else:
+        return 'Changed'
+
+def get_changes_from_git():
+    """Get changes from git commits since last tag"""
+    changes = {
+        'Added': [],
+        'Changed': [],
+        'Fixed': []
+    }
+    
+    last_tag = get_last_tag()
+    
+    # Get commits since last tag
+    git_log_command = ['git', 'log', '--pretty=format:%s']
+    if last_tag:
+        git_log_command.append(f'{last_tag}..HEAD')
+    
+    try:
+        result = subprocess.run(git_log_command, capture_output=True, text=True)
+        commits = result.stdout.strip().split('\n')
+        
+        # Filter out empty commits and categorize
+        for commit in commits:
+            if commit:
+                category = categorize_commit(commit)
+                # Clean up commit message
+                clean_msg = re.sub(r'^(feat|fix|chore|docs|style|refactor|perf|test)(\(.*\))?:', '', commit).strip()
+                changes[category].append(clean_msg)
+                
+    except subprocess.CalledProcessError:
+        print("Error: Failed to get git commits")
+        return None
+    
+    return changes
+
+def push_changes(version):
+    """Push changes to upstream"""
+    try:
+        # Stage the CHANGELOG.md
+        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
+        
+        # Commit the changelog
+        commit_msg = f"docs: update changelog for version {version}"
+        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
+        
+        # Push to origin (local)
+        subprocess.run(['git', 'push', 'origin'], check=True)
+        print("Successfully pushed to origin")
+        
+        # Ask for upstream push
+        response = input("Do you want to push to GitHub (upstream)? (y/n): ").lower()
+        if response == 'y':
+            subprocess.run(['git', 'push', 'upstream'], check=True)
+            print("Successfully pushed to upstream")
+            
+    except subprocess.CalledProcessError as e:
+        print(f"Error during git operations: {e}")
+        return False
+    return True
+
+def update_changelog():
+    version = get_version()
+    today = datetime.now().strftime('%Y-%m-%d')
+    
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    project_dir = os.path.dirname(script_dir)
+    changelog_path = os.path.join(project_dir, 'CHANGELOG.md')
+    
+    # Get changes from git
+    changes = get_changes_from_git()
+    if not changes:
+        print("No changes found or error occurred")
+        return
+    
+    # Create changelog entry
+    changelog_entry = f"## [{version}] - {today}\n"
+    for section, entries in changes.items():
+        if entries:  # Only add sections that have entries
+            changelog_entry += f"### {section}\n"
+            for entry in entries:
+                changelog_entry += f"- {entry}\n"
+            changelog_entry += "\n"
+    
+    if not os.path.exists(changelog_path):
+        with open(changelog_path, 'w') as f:
+            f.write(f"# Changelog\n\n{changelog_entry}")
+        push_changes(version)
+    else:
+        with open(changelog_path, 'r') as f:
+            content = f.read()
+        
+        if f"[{version}]" not in content:
+            updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
+            with open(changelog_path, 'w') as f:
+                f.write(updated_content)
+            push_changes(version)
+        else:
+            print(f"Version {version} already exists in changelog")
+
+if __name__ == "__main__":
+    update_changelog()

src/api.cpp

@@ -279,6 +279,7 @@ bool checkSpoolmanExtraFields() {
         "price_meter",
         "price_gramm",
         "bambu_setting_id",
+        "bambu_cali_id",
         "bambu_idx",
         "bambu_k",
         "bambu_flow_ratio",
@@ -312,7 +313,11 @@ bool checkSpoolmanExtraFields() {
         "\"field_type\": \"text\","
         "\"key\": \"bambu_setting_id\"}",
 
-        "{\"name\": \"Bambu IDX\","
+        "{\"name\": \"Bambu Cali ID\","
+        "\"field_type\": \"text\","
+        "\"key\": \"bambu_cali_id\"}",
+
+        "{\"name\": \"Bambu Filament IDX\","
         "\"field_type\": \"text\","
         "\"key\": \"bambu_idx\"}",
 

src/bambu.cpp

@@ -137,43 +137,7 @@ bool sendMqttMessage(String payload) {
 }
 
 bool setBambuSpool(String payload) {
-    /* payload
-    //// set Spool
-    {
-        "print": {
-            "sequence_id": 0,
-            "command": "ams_filament_setting",
-            "ams_id": 0, // AMS ID 0-3 oder externe Spule 255
-            "tray_id": 0, // Tray ID 0-3 oder externe Spule 254
-            "tray_color": "000000FF",
-            "nozzle_temp_min": 170,
-            "nozzle_temp_max": 200,
-            "tray_type": "PETG",
-            "setting_id": "",
-            "tray_info_idx": "GFG99"
-        }
-    }
-
-
-
-    //// Remove Spool
-    {
-        "print":{
-            "ams_id":255,
-            "command":"ams_filament_setting",
-            "nozzle_temp_max": 0,
-            "nozzle_temp_min": 0,
-            "sequence_id": 0,
-            "setting_id": "",
-            "tray_color": "FFFFFFFF",
-            "tray_id": 254,
-            "tray_info_idx": "",
-            "tray_type": "",
-        }
-    }
-    */
-
-    Serial.println("Setting spool");
+    Serial.println("Spool settings in");
     Serial.println(payload);
 
     // Parse the JSON
@@ -193,8 +157,10 @@ bool setBambuSpool(String payload) {
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
     String brand = doc["brand"].as<String>();
-    String tray_info_idx = doc["tray_info_idx"].as<String>();
+    String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
     if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    String setting_id = doc["bambu_setting_id"].as<String>();
+    String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
@@ -206,13 +172,14 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    doc["print"]["setting_id"] = "";
+    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
+    doc["print"]["setting_id"] = setting_id;
 
     // Serialize the JSON
     String output;
     serializeJson(doc, output);
-    
+
     if (sendMqttMessage(output)) {
         Serial.println("Spool successfully set");
     }
@@ -222,6 +189,67 @@ bool setBambuSpool(String payload) {
         return false;
     }
     
+    doc.clear();
+    yield();
+
+    if (cali_idx != "") {
+        yield();
+        doc["print"]["sequence_id"] = 0;
+        doc["print"]["command"] = "extrusion_cali_sel";
+        doc["print"]["filament_id"] = tray_info_idx;
+        doc["print"]["nozzle_diameter"] = "0.4";
+        doc["print"]["cali_idx"] = cali_idx.toInt();
+        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+
+        // Serialize the JSON
+        String output;
+        serializeJson(doc, output);
+
+        if (sendMqttMessage(output)) {
+            Serial.println("Extrusion calibration successfully set");
+        }
+        else
+        {
+            Serial.println("Failed to set extrusion calibration");
+            return false;
+        }
+
+        doc.clear();
+        yield();
+    }
+/*
+    if (setting_id != "") {
+        yield();
+        doc["print"]["sequence_id"] = 0;
+        doc["print"]["command"] = "ams_filament_setting";
+        doc["print"]["nozzle_temp_min"] = minTemp;
+        doc["print"]["nozzle_temp_max"] = maxTemp;
+        doc["print"]["setting_id"] = setting_id;
+        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
+        doc["print"]["tray_info_idx"] = tray_info_idx;
+        doc["print"]["tray_type"] = type;
+
+        // Serialize the JSON
+        String output;
+        serializeJson(doc, output);
+
+        if (sendMqttMessage(output)) {
+            Serial.println("Filament Setting successfully set");
+        }
+        else
+        {
+            Serial.println("Failed to set Filament setting");
+            return false;
+        }
+
+        doc.clear();
+        yield();
+    }
+*/
+
     return true;
 }
 
@@ -278,7 +306,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 JsonObject trayObj = trayArray[j];
                 if (trayObj["tray_info_idx"].as<String>() != ams_data[storedIndex].trays[j].tray_info_idx ||
                     trayObj["tray_type"].as<String>() != ams_data[storedIndex].trays[j].tray_type ||
-                    trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color) {
+                    trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color ||
+                    trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
                     break;
                 }
@@ -295,7 +324,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                     foundExternal = true;
                     if (vtTray["tray_info_idx"].as<String>() != ams_data[i].trays[0].tray_info_idx ||
                         vtTray["tray_type"].as<String>() != ams_data[i].trays[0].tray_type ||
-                        vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color) {
+                        vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color ||
+                        vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx) {
                         hasChanges = true;
                     }
                     break;
@@ -304,17 +334,11 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             if (!foundExternal) hasChanges = true;
         }
 
-        // Wenn Bambu connection changed
-        if (bambu_connected != doc["print"]["bambu_connected"].as<bool>()) {
-            hasChanges = true;
-        }
-
         if (!hasChanges) return;
 
         // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
         ams_count = amsArray.size();
         
-        // Restlicher bestehender Code...
         for (int i = 0; i < ams_count && i < 16; i++) {
             JsonObject amsObj = amsArray[i];
             JsonArray trayArray = amsObj["tray"].as<JsonArray>();
@@ -331,25 +355,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
                 ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
                 ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
-            }
-        }
-        //Serial.println("----------------");
-        //Serial.println();
-
-        // Sende die aktualisierten AMS-Daten an alle WebSocket-Clients
-        //sendAmsData(nullptr);
-
-        // Verarbeite erst die normalen AMS-Daten
-        for (int i = 0; i < amsArray.size() && i < 16; i++) {
-            JsonObject amsObj = amsArray[i];
-            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
-
-            ams_data[i].ams_id = amsObj["id"].as<uint8_t>();
-            for (int j = 0; j < trayArray.size() && j < 4; j++) {
-                JsonObject trayObj = trayArray[j];
-                ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
-                ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
-                // ... weitere Tray-Daten ...
+                ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
             }
         }
         
@@ -369,6 +375,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
             ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
             ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
             ams_count++;  // Erhöhe ams_count für die externe Spule
         }
 
@@ -396,12 +403,60 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
                 trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
                 trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
+                trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
             }
         }
 
         serializeJson(wsArray, amsJsonData);
         sendAmsData(nullptr);
     }
+    // Neue Bedingung für ams_filament_setting
+    else if (doc["print"]["command"] == "ams_filament_setting") {
+        int amsId = doc["print"]["ams_id"].as<int>();
+        int trayId = doc["print"]["tray_id"].as<int>();
+        String settingId = doc["print"]["setting_id"].as<String>();
+        
+        // Finde das entsprechende AMS und Tray
+        for (int i = 0; i < ams_count; i++) {
+            if (ams_data[i].ams_id == amsId) {
+                // Update setting_id im entsprechenden Tray
+                ams_data[i].trays[trayId].setting_id = settingId;
+                
+                // Erstelle neues JSON für WebSocket-Clients
+                JsonDocument wsDoc;
+                JsonArray wsArray = wsDoc.to<JsonArray>();
+
+                for (int j = 0; j < ams_count; j++) {
+                    JsonObject amsObj = wsArray.createNestedObject();
+                    amsObj["ams_id"] = ams_data[j].ams_id;
+
+                    JsonArray trays = amsObj.createNestedArray("tray");
+                    int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
+                    
+                    for (int k = 0; k < maxTrays; k++) {
+                        JsonObject trayObj = trays.createNestedObject();
+                        trayObj["id"] = ams_data[j].trays[k].id;
+                        trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
+                        trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
+                        trayObj["tray_sub_brands"] = ams_data[j].trays[k].tray_sub_brands;
+                        trayObj["tray_color"] = ams_data[j].trays[k].tray_color;
+                        trayObj["nozzle_temp_min"] = ams_data[j].trays[k].nozzle_temp_min;
+                        trayObj["nozzle_temp_max"] = ams_data[j].trays[k].nozzle_temp_max;
+                        trayObj["setting_id"] = ams_data[j].trays[k].setting_id;
+                        trayObj["cali_idx"] = ams_data[j].trays[k].cali_idx;
+                    }
+                }
+
+                // Aktualisiere das globale amsJsonData
+                amsJsonData = "";
+                serializeJson(wsArray, amsJsonData);
+                
+                // Sende an WebSocket Clients
+                sendAmsData(nullptr);
+                break;
+            }
+        }
+    }
 }
 
 void reconnect() {
@@ -511,4 +566,11 @@ bool setupMqtt() {
         return false;
     }
     return true;
+}
+
+void bambu_restart() {
+    if (BambuMqttTask) {
+        vTaskDelete(BambuMqttTask);
+    }
+    setupMqtt();
 }

src/bambu.h

@@ -13,6 +13,7 @@ struct TrayData {
     int nozzle_temp_min;
     int nozzle_temp_max;
     String setting_id;
+    String cali_idx;
 };
 
 #define MAX_AMS 17  // 16 normale AMS + 1 externe Spule
@@ -33,5 +34,6 @@ bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr,
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
+void bambu_restart();
 
 #endif

src/website.cpp

@@ -69,6 +69,16 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
             }
         }
 
+        else if (doc["type"] == "reconnect") {
+            if (doc["payload"] == "bambu") {
+                bambu_restart();
+            }
+
+            if (doc["payload"] == "spoolman") {
+                initSpoolman();
+            }
+        }
+
         else if (doc["type"] == "setBambuSpool") {
             Serial.println(doc["payload"].as<String>());
             setBambuSpool(doc["payload"]);
@@ -82,24 +92,16 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
 
 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
-    if (!SPIFFS.exists(filename) || !SPIFFS.exists("/header.html")) {
+    Serial.println("Lade HTML-Datei: " + String(filename));
+    if (!SPIFFS.exists(filename)) {
         Serial.println("Fehler: Datei nicht gefunden!");
         return "Fehler: Datei nicht gefunden!";
     }
 
-    // Lade den Header
-    File headerFile = SPIFFS.open("/header.html", "r");
-    String header = headerFile.readString();
-    headerFile.close();
-
-    // Lade die Hauptdatei
     File file = SPIFFS.open(filename, "r");
     String html = file.readString();
     file.close();
 
-    // Ersetze den Platzhalter mit dem Header
-    html.replace("{{header}}", header);
-
     return html;
 }
 
@@ -159,25 +161,31 @@ void setupWebserver(AsyncWebServer &server) {
     Serial.print("Geladene Spoolman-URL: ");
     Serial.println(spoolmanUrl);
 
-    // Route für die Startseite
+    // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("Anfrage für / erhalten");
-        String html = loadHtmlWithHeader("/index.html");
-        request->send(200, "text/html", html);
+        Serial.println("Anfrage für /about erhalten");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/about.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
     });
 
     // Route für Waage
     server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /waage erhalten");
-        String html = loadHtmlWithHeader("/waage.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
     });
 
     // Route für RFID
     server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid erhalten");
-        String html = loadHtmlWithHeader("/rfid.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
         Serial.println("RFID-Seite gesendet");
     });
 
@@ -201,8 +209,10 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für WiFi
     server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /wifi erhalten");
-        String html = loadHtmlWithHeader("/wifi.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
     });
 
     // Route für Spoolman Setting