docs: update changelog for version 1.2.77

.github/workflows/providers/build.yml

@@ -1,87 +0,0 @@
-name: Build Firmware
-
-on:
-  workflow_call:
-    outputs:
-      version:
-        description: "The version from the tag"
-        value: ${{ jobs.build.outputs.version }}
-      changelog:
-        description: "The changelog for the current version"
-        value: ${{ jobs.build.outputs.changelog }}
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.get_version.outputs.VERSION }}
-      changelog: ${{ steps.changelog.outputs.CHANGES }}
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio
-    
-    - name: Build Firmware
-      run: |
-        pio run -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
-        
-    - name: Install esptool
-      run: |
-        pip install esptool
-        
-    - name: Merge firmware and SPIFFS
-      run: |
-        esptool.py --chip esp32 merge_bin \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-
-    - name: Prepare OTA firmware
-      run: |
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: |
-        if [ -n "$GITEA_REF" ]; then
-          echo "VERSION=${GITEA_REF#refs/tags/v}" >> $GITEA_OUTPUT
-        else
-          echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-        fi
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        if [ -n "$GITEA_OUTPUT" ]; then
-          echo "CHANGES<<EOF" >> $GITEA_OUTPUT
-          echo "$CHANGELOG" >> $GITEA_OUTPUT
-          echo "EOF" >> $GITEA_OUTPUT
-        else
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "$CHANGELOG" >> $GITHUB_OUTPUT
-          echo "EOF" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Upload artifacts
-      uses: actions/upload-artifact@v3
-      with:
-        name: firmware
-        path: |
-          .pio/build/esp32dev/filaman_full.bin
-          .pio/build/esp32dev/filaman_ota.bin

.github/workflows/providers/gitea-release.yml

@@ -4,15 +4,12 @@ on:
   workflow_call:
     inputs:
       gitea_ref_name:
-        description: 'Gitea ref name'
         required: true
         type: string
       gitea_server_url:
-        description: 'Gitea server URL'
         required: true
         type: string
       gitea_repository:
-        description: 'Gitea repository'
         required: true
         type: string
     secrets:
@@ -23,39 +20,29 @@ jobs:
   create-release:
     runs-on: ubuntu-latest
     steps:
-    - name: Checkout Repository
-      uses: actions/checkout@v4
-
-    - name: Install System Dependencies
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
       run: |
-        sudo apt-get update
-        sudo apt-get install -y python3 python3-venv build-essential curl git
-
-    - name: Set up Python Virtual Environment
-      run: |
-        python3 -m venv venv
-        source venv/bin/activate
-        pip install --upgrade pip
-        pip install platformio esptool
-        
-        echo "Verifying installations:"
-        platformio --version
-        python3 --version
-        esptool.py version
-
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
     - name: Build Firmware
       run: |
-        source venv/bin/activate
-        echo "Building SPIFFS..."
-        platformio run -t buildfs
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
         
-        echo "Building firmware..."
-        platformio run
-
-    - name: Create Release Files
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
       run: |
-        source venv/bin/activate
-        echo "Creating release files..."
         esptool.py --chip esp32 merge_bin \
           --flash_mode dio \
           --flash_freq 40m \
@@ -64,51 +51,47 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-        
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
 
+    - name: Prepare OTA firmware
+      run: |
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
+    
     - name: Create Release
       env:
         TOKEN: ${{ secrets.GITEA_TOKEN }}
-        GITEA_REF_NAME: ${{ inputs.gitea_ref_name }}
-        GITEA_SERVER_URL: ${{ inputs.gitea_server_url }}
-        GITEA_REPOSITORY: ${{ inputs.gitea_repository }}
       run: |
-        echo "Debug environment:"
-        echo "GITEA_REF_NAME: ${GITEA_REF_NAME}"
-        echo "GITEA_SERVER_URL: ${GITEA_SERVER_URL}"
-        echo "GITEA_REPOSITORY: ${GITEA_REPOSITORY}"
-        
-        TAG="${GITEA_REF_NAME}"
-        API_URL="${GITEA_SERVER_URL}/api/v1"
-        REPO="${GITEA_REPOSITORY}"
-        
-        echo "Creating release for ${TAG} on ${REPO}..."
+        TAG="${{ inputs.gitea_ref_name }}"
+        API_URL="${{ inputs.gitea_server_url }}/api/v1"
+        REPO="${{ inputs.gitea_repository }}"
         
         # Create release
         RESPONSE=$(curl -k -s \
           -X POST \
           -H "Authorization: token ${TOKEN}" \
           -H "Content-Type: application/json" \
-          -d "{\"tag_name\":\"${TAG}\",\"name\":\"Release ${TAG}\"}" \
+          -d "{
+            \"tag_name\":\"${TAG}\",
+            \"name\":\"Release ${TAG}\",
+            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
+          }" \
           "${API_URL}/repos/${REPO}/releases")
         
         RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        UPLOAD_URL=$(echo "$RESPONSE" | grep -o '"upload_url":"[^"]*' | cut -d':' -f2- | tr -d '"')
         
         if [ -n "$RELEASE_ID" ]; then
           echo "Release created with ID: $RELEASE_ID"
           
-          # Upload files
-          for file in "filaman_full.bin" "filaman_ota.bin"; do
+          # Upload binaries
+          cd .pio/build/esp32dev
+          for file in filaman_full.bin filaman_ota.bin; do
             echo "Uploading $file..."
             curl -k -s \
               -X POST \
               -H "Authorization: token ${TOKEN}" \
               -H "Content-Type: application/octet-stream" \
-              --data-binary "@.pio/build/esp32dev/$file" \
-              "${UPLOAD_URL}?name=$file"
+              --data-binary "@$file" \
+              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
           done
         else
           echo "Failed to create release. Response:"

.github/workflows/providers/github-release.yml

@@ -40,7 +40,7 @@ jobs:
           0x1000 .pio/build/esp32dev/bootloader.bin \
           0x8000 .pio/build/esp32dev/partitions.bin \
           0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
+          0x3D0000 .pio/build/esp32dev/spiffs.bin
 
     - name: Prepare OTA firmware
       run: |

CHANGELOG.md

@@ -1,5 +1,219 @@
 # Changelog
 
+## [1.2.77] - 2025-02-20
+### Changed
+- optimize Gitea release workflow by simplifying build steps and improving file handling
+- update webpages for version v1.2.77
+
+
+## [1.2.76] - 2025-02-20
+### Added
+- enhance OTA update process with improved file verification and new OTA data initialization
+
+### Changed
+- update webpages for version v1.2.76
+- streamline Gitea release workflow and remove obsolete OTA data initialization script
+
+
+## [1.2.75] - 2025-02-20
+### Changed
+- update webpages for version v1.2.75
+- simplify OTA update handling by removing unnecessary variables and improving error reporting
+
+
+## [1.2.74] - 2025-02-20
+### Changed
+- update webpages for version v1.2.74
+- enhance OTA update process with improved handling of full image updates and SPIFFS data
+
+
+## [1.2.73] - 2025-02-20
+### Changed
+- update webpages for version v1.2.73
+- improve OTA update process with enhanced size checks and progress logging
+
+### Fixed
+- enhance OTA update process with improved size checks and debugging output
+
+
+## [1.2.72] - 2025-02-20
+### Changed
+- update webpages for version v1.2.72
+- simplify OTA update process by removing unnecessary buffer and adjusting offsets
+
+
+## [1.2.71] - 2025-02-20
+### Added
+- update version number to v1.2.65 in HTML files and platformio.ini; add script to create full binary
+
+### Changed
+- update webpages for version v1.2.71
+
+
+## [1.2.70] - 2025-02-20
+### Added
+- add logging to stopAllTasks for better debugging
+
+### Changed
+- update webpages for version v1.2.70
+
+
+## [1.2.69] - 2025-02-20
+### Changed
+- update webpages for version v1.2.69
+
+
+## [1.2.68] - 2025-02-20
+### Added
+- add task handles for BambuMqttTask and ScaleTask; rename stopTasks to stopAllTasks
+
+### Changed
+- update webpages for version v1.2.68
+
+### Fixed
+- update stopAllTasks to suspend RfidReaderTask instead of NfcTask
+
+
+## [1.2.67] - 2025-02-20
+### Added
+- improve OTA upload handling and add SPIFFS update support
+
+### Changed
+- update webpages for version v1.2.67
+
+
+## [1.2.66] - 2025-02-20
+### Added
+- enhance OTA upload to support SPIFFS updates
+
+### Changed
+- update webpages for version v1.2.66
+
+
+## [1.2.65] - 2025-02-20
+### Changed
+- update webpages for version v1.2.65
+
+
+## [1.2.64] - 2025-02-20
+### Changed
+- update webpages for version v1.2.64
+
+### Fixed
+- improve error handling in OTA upload process
+
+
+## [1.2.63] - 2025-02-20
+### Added
+- update version to 1.2.63
+
+### Changed
+- update webpages for version v1.2.63
+
+
+## [1.2.62] - 2025-02-20
+### Added
+- update version to 1.2.62
+
+### Changed
+- update webpages for version 1.2.62
+
+
+## [1.2.61] - 2025-02-20
+### Added
+- update version to 1.2.61 and enhance OTA update error handling
+
+### Changed
+- update webpages for version 1.2.61
+
+
+## [1.2.60] - 2025-02-20
+### Added
+- update version to 1.2.60 in platformio configuration
+
+### Changed
+- update webpages for version 1.2.60
+
+
+## [1.2.59] - 2025-02-20
+### Added
+- update version to 1.2.59 and enhance OTA upload handling
+
+### Changed
+- update webpages for version 1.2.59
+
+
+## [1.2.58] - 2025-02-20
+### Added
+- update version to 1.2.58 in HTML files and platformio configuration
+
+
+## [1.2.57] - 2025-02-20
+### Added
+- update version to 1.2.57 in platformio configuration
+
+### Fixed
+- update spiffs offset and sizes in firmware and partitions configuration
+
+
+## [1.2.56] - 2025-02-19
+### Added
+- update version to 1.2.56 and adjust firmware and partition settings
+
+### Changed
+- remove redundant comment from Gitea release workflow
+
+
+## [1.2.55] - 2025-02-19
+### Added
+- update version to 1.2.55 and adjust Gitea release workflow to remove 'v' prefix from version
+
+
+## [1.2.54] - 2025-02-19
+### Added
+- update version to 1.2.54 and add check for missing changelog in Gitea release workflow
+
+
+## [1.2.53] - 2025-02-19
+### Added
+- update version to 1.2.53 and enhance Gitea release workflow to handle missing changelog
+
+
+## [1.2.52] - 2025-02-19
+### Added
+- update version to 1.2.52 and improve Gitea release workflow output handling
+
+
+## [1.2.51] - 2025-02-19
+### Added
+- update version to 1.2.51 and add debug output in Gitea release workflow
+
+
+## [1.2.50] - 2025-02-19
+### Added
+- update version to 1.2.50 and remove obsolete build workflow
+
+
+## [1.2.49] - 2025-02-19
+### Added
+- update version to 1.2.49 and modify changelog reading in Gitea release workflow
+
+
+## [1.2.48] - 2025-02-19
+### Added
+- update version to 1.2.48 and modify changelog reading in release workflows
+
+
+## [1.2.47] - 2025-02-19
+### Added
+- update version to 1.2.47 and modify changelog reading in GitHub release workflow
+
+
+## [1.2.46] - 2025-02-19
+### Added
+- update Gitea release workflow to include changelog and increment version to 1.2.46
+
+
 ## [1.2.45] - 2025-02-19
 ### Added
 - update Gitea release workflow to use dynamic upload URL and increment version to 1.2.45

html/header.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/upgrade.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/waage.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -12,7 +12,7 @@
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.29</span></h1>
+                <h1>FilaMan<span class="version">v1.2.77</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

platformio.ini

@@ -9,7 +9,7 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.45"
+version = "1.2.77"
 
 [env:esp32dev]
 platform = espressif32
@@ -59,6 +59,13 @@ build_flags =
     -DOTA_PARTITION_SUBTYPE=0x10
     -DPARTITION_TABLE_OFFSET=0x8000
     -DPARTITION_TABLE_SIZE=0x1000
+    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
+    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
+    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
+    -DCONFIG_PARTITION_TABLE_MD5=y
+    -DBOOT_APP_PARTITION_OTA_0=1
     
 extra_scripts = 
     scripts/extra_script.py

src/bambu.h

@@ -36,4 +36,5 @@ void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
 void bambu_restart();
 
+extern TaskHandle_t BambuMqttTask;
 #endif

src/ota.cpp

@@ -3,44 +3,76 @@
 #include <Update.h>
 #include <SPIFFS.h>
 #include "commonFS.h"
+#include "bambu.h"
+#include "scale.h"
+#include "nfc.h"
+
+static bool tasksAreStopped = false;
+
+void stopAllTasks() {
+    Serial.println("Stopping RFID Reader");
+    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
+    Serial.println("Stopping Bambu");
+    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
+    Serial.println("Stopping Scale");
+    if (ScaleTask) vTaskSuspend(ScaleTask);
+    vTaskDelay(100 / portTICK_PERIOD_MS);
+    Serial.println("All tasks stopped");
+}
 
 void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
     static size_t contentLength = 0;
     
     if (!index) {
         contentLength = request->contentLength();
-        Serial.printf("Update size: %u bytes\n", contentLength);
+        Serial.printf("Update Start: %s (size: %u bytes)\n", filename.c_str(), contentLength);
         
         if (contentLength == 0) {
             request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
             return;
         }
 
-        if (!Update.begin(contentLength)) {
-            Serial.printf("Not enough space: %u required\n", contentLength);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Not enough space available\"}");
+        // Stoppe alle Tasks vor dem Update
+        if (!tasksAreStopped && (RfidReaderTask || BambuMqttTask || ScaleTask)) {
+            stopAllTasks();
+            tasksAreStopped = true;
+        }
+
+        // Für full.bin keine Magic Byte Prüfung
+        bool isFullImage = (contentLength > 0x300000);
+        if (!isFullImage && data[0] != 0xE9) {
+            Serial.printf("Wrong magic byte: 0x%02X (expected 0xE9)\n", data[0]);
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid firmware format\"}");
             return;
         }
-        
-        Serial.println("Update started");
+
+        // Bei full.bin UPDATE_SIZE_UNKNOWN verwenden
+        if (!Update.begin(isFullImage ? UPDATE_SIZE_UNKNOWN : contentLength)) {
+            Update.printError(Serial);
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"OTA could not begin\"}");
+            return;
+        }
+        Serial.printf("Starting %s update\n", isFullImage ? "full" : "firmware");
     }
 
+    // Schreibe Update-Daten
     if (Update.write(data, len) != len) {
         Update.printError(Serial);
-        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Error writing update\"}");
+        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"OTA write failed\"}");
         return;
     }
 
+    // Update abschließen
     if (final) {
-        if (Update.end(true)) {
-            Serial.println("Update complete");
-            request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
-            delay(1000);
-            ESP.restart();
-        } else {
+        if (!Update.end(true)) {
             Update.printError(Serial);
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed\"}");
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"OTA end failed\"}");
+            return;
         }
+        Serial.println("Update successful, restarting...");
+        request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
+        delay(500);
+        ESP.restart();
     }
 }
 

src/ota.h

@@ -3,6 +3,12 @@
 
 #include <ESPAsyncWebServer.h>
 
+// Update size unknown constant, falls nicht bereits definiert
+#ifndef UPDATE_SIZE_UNKNOWN
+#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
+#endif
+
+void stopAllTasks();
 void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
 
 #endif

src/scale.h

@@ -15,4 +15,6 @@ extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
 
+extern TaskHandle_t ScaleTask;
+
 #endif

src/wlan.cpp

@@ -12,7 +12,7 @@ bool wm_nonblocking = false;
 void initWiFi() {
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
   
-    esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen