docs: update changelog for version 1.3.42

.github/workflows/gitea-release.yml

@@ -0,0 +1,165 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    secrets:
+      GITEA_TOKEN:
+        description: 'Token für Gitea API-Zugriff'
+        required: true
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary (without header)
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+
+    - name: Determine Gitea URL
+      id: gitea_url
+      run: |
+        echo "Debug Environment:"
+        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
+        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
+        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+        
+        # Set API URL based on environment
+        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+          GITEA_API_URL="${GITHUB_SERVER_URL}"
+          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
+          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
+        else
+          echo "Error: This workflow is only for Gitea"
+          exit 1
+        fi
+        
+        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
+        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
+        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
+
+    - name: Create Gitea Release
+      env:
+        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
+        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
+        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
+      run: |
+        # Debug Token (nur Länge ausgeben für Sicherheit)
+        echo "Debug: Token length: ${#GITEA_TOKEN}"
+        if [ -z "$GITEA_TOKEN" ]; then
+          echo "Error: GITEA_TOKEN is empty"
+          exit 1
+        fi
+
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Debug-Ausgaben
+        echo "Debug: API URL: ${GITEA_API_URL}"
+        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
+        
+        # Erstelle zuerst den Release ohne Dateien
+        echo "Debug: Creating release..."
+        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.changelog.outputs.CHANGES }}\"}"
+        
+        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
+          -X POST \
+          -H "Authorization: token ${GITEA_TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "${RELEASE_DATA}" \
+          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
+        
+        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
+        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
+        
+        if [ "$RELEASE_STATUS" != "201" ]; then
+          echo "Error: Failed to create release"
+          echo "Response: $RELEASE_BODY"
+          exit 1
+        fi
+        
+        # Extrahiere die Release-ID aus der Antwort
+        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
+        
+        # Lade die Dateien einzeln hoch
+        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
+          if [ -f "$file" ]; then
+            echo "Debug: Uploading $file..."
+            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
+              -X POST \
+              -H "Authorization: token ${GITEA_TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary @"$file" \
+              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
+            
+            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
+            if [ "$UPLOAD_STATUS" != "201" ]; then
+              echo "Warning: Failed to upload $file"
+              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
+            else
+              echo "Successfully uploaded $file"
+            fi
+          fi
+        done

.github/workflows/github-release.yml

@@ -2,6 +2,13 @@ name: GitHub Release
 
 on:
   workflow_call:
+    secrets:
+      RELEASE_TOKEN:
+        description: 'GitHub token for release creation'
+        required: true
+
+permissions:
+  contents: write
 
 jobs:
   create-release:
@@ -10,6 +17,8 @@ jobs:
       contents: write
     steps:
     - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
     
     - name: Set up Python
       uses: actions/setup-python@v4
@@ -26,17 +35,6 @@ jobs:
         sudo apt-get update
         sudo apt-get install xxd
     
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
     - name: Build Firmware
       run: |
         VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
@@ -47,26 +45,23 @@ jobs:
         pio run -t buildfs
         
         # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary (without header)
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
         
         # Create full binary (always)
-        (cd .pio/build/esp32dev && \
+        (cd .pio/build/esp32dev && 
         esptool.py --chip esp32 merge_bin \
           --fill-flash-size 4MB \
           --flash_mode dio \
           --flash_freq 40m \
           --flash_size 4MB \
           -o filaman_full_${VERSION}.bin \
-          0x0000 bootloader.bin \
+          0x1000 bootloader.bin \
           0x8000 partitions.bin \
           0x10000 firmware.bin \
-          0x390000 spiffs.bin)
-        
-        # Only copy SPIFFS binary if data changed
-        if [[ "${{ steps.check_data.outputs.DATA_CHANGED }}" == "true" ]]; then
-          echo "Data changes detected, copying SPIFFS binary..."
-          cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        fi
+          0x3D0000 spiffs.bin)
         
         # Verify file sizes
         echo "File sizes:"
@@ -89,22 +84,22 @@ jobs:
 
     - name: Create GitHub Release
       env:
-        GH_TOKEN: ${{ github.token }}
+        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
       run: |
         VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
         
         # Create release with available files
-        cd .pio/build/esp32dev
         FILES_TO_UPLOAD=""
         
         # Always add firmware
-        if [ -f "filaman_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_${VERSION}.bin"
+        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
         fi
         
         # Add SPIFFS and full binary only if they exist
-        if [ -f "webpage_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD webpage_${VERSION}.bin"
+        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
         fi
         
         if [ -f "filaman_full_${VERSION}.bin" ]; then

.github/workflows/providers/gitea-release.yml

@@ -1,185 +0,0 @@
-name: Gitea Release
-
-on:
-  workflow_call:
-    inputs:
-      gitea_server_url:
-        required: true
-        type: string
-      gitea_repository:
-        required: true
-        type: string
-    secrets:
-      GITEA_TOKEN:
-        required: true
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-
-    - name: Build Firmware
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Always build firmware and SPIFFS
-        echo "Building firmware and SPIFFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        
-        # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        
-        # Create full binary (always)
-        (cd .pio/build/esp32dev && \
-        esptool.py --chip esp32 merge_bin \
-          --fill-flash-size 4MB \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o filaman_full_${VERSION}.bin \
-          0x0000 bootloader.bin \
-          0x8000 partitions.bin \
-          0x10000 firmware.bin \
-          0x390000 spiffs.bin)
-        
-        # Only copy SPIFFS binary if data changed
-        if [[ "${{ steps.check_data.outputs.DATA_CHANGED }}" == "true" ]]; then
-          echo "Data changes detected, copying SPIFFS binary..."
-          cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        fi
-        
-        # Verify file sizes
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-        
-    - name: Prepare binaries
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Create full binary only if SPIFFS changed
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Creating full binary..."
-          cd .pio/build/esp32dev && \
-          esptool.py --chip esp32 merge_bin \
-            --fill-flash-size 4MB \
-            --flash_mode dio \
-            --flash_freq 40m \
-            --flash_size 4MB \
-            -o filaman_full_${VERSION}.bin \
-            0x0000 bootloader.bin \
-            0x8000 partitions.bin \
-            0x10000 firmware.bin \
-            0x390000 spiffs.bin
-        fi
-        
-        # Verify file sizes
-        echo "File sizes:"
-        cd .pio/build/esp32dev && ls -lh *.bin
-
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-        
-    - name: Create Release
-      env:
-        TOKEN: ${{ secrets.GITEA_TOKEN }}
-      run: |
-        API_URL="${{ inputs.gitea_server_url }}/api/v1"
-        REPO="${{ inputs.gitea_repository }}"
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        
-        # Create release
-        RESPONSE=$(curl -k -s \
-          -X POST \
-          -H "Authorization: token ${TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "{
-            \"tag_name\":\"v${VERSION}\",
-            \"name\":\"Release ${VERSION}\",
-            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
-          }" \
-          "${API_URL}/repos/${REPO}/releases")
-        
-        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        
-        if [ -n "$RELEASE_ID" ]; then
-          echo "Release created with ID: $RELEASE_ID"
-          
-          # Always upload firmware and full binary
-          for file in filaman_${VERSION}.bin filaman_full_${VERSION}.bin; do
-            if [ -f ".pio/build/esp32dev/$file" ]; then
-              echo "Uploading $file..."
-              curl -k -s \
-                -X POST \
-                -H "Authorization: token ${TOKEN}" \
-                -H "Content-Type: application/octet-stream" \
-                --data-binary "@.pio/build/esp32dev/$file" \
-                "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-            fi
-          done
-          
-          # Upload SPIFFS binary only if it exists (data changes)
-          if [ -f ".pio/build/esp32dev/webpage_${VERSION}.bin" ]; then
-            echo "Uploading webpage binary..."
-            curl -k -s \
-              -X POST \
-              -H "Authorization: token ${TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              --data-binary "@.pio/build/esp32dev/webpage_${VERSION}.bin" \
-              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=webpage_${VERSION}.bin"
-          fi
-        else
-          echo "Failed to create release. Response:"
-          echo "$RESPONSE"
-          exit 1
-        fi

.github/workflows/release.yml

@@ -5,66 +5,37 @@ on:
     tags:
       - 'v*'
 
+permissions:
+  contents: write
+
 jobs:
-  route:
+  detect-provider:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
-      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
-      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
-      - name: Checkout Repository
-        uses: actions/checkout@v3
-
-      - name: Debug Environment
-        run: |
-          echo "CI Environment Details:"
-          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
-          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
-          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
-          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
-          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
-
       - name: Determine CI Provider
         id: provider
         shell: bash
         run: |
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
             echo "provider=gitea" >> "$GITHUB_OUTPUT"
-            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
-            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
-            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
-          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
-            echo "provider=github" >> "$GITHUB_OUTPUT"
           else
-            echo "provider=unknown" >> "$GITHUB_OUTPUT"
-          fi
-
-  verify-provider:
-    needs: route
-    runs-on: ubuntu-latest
-    steps:
-      - name: Echo detected provider
-        run: |
-          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
-          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
-            echo "::error::Failed to detect CI provider!"
-            exit 1
+            echo "provider=github" >> "$GITHUB_OUTPUT"
           fi
 
   github-release:
-    needs: [route, verify-provider]
-    if: needs.route.outputs.provider == 'github'
-    uses: ./.github/workflows/providers/github-release.yml
+    needs: detect-provider
+    permissions:
+      contents: write
+    if: needs.detect-provider.outputs.provider == 'github'
+    uses: ./.github/workflows/github-release.yml
+    secrets:
+      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   gitea-release:
-    needs: [route, verify-provider]
-    if: needs.route.outputs.provider == 'gitea'
-    uses: ./.github/workflows/providers/gitea-release.yml
-    with:
-      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
-      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
-      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    needs: detect-provider
+    if: needs.detect-provider.outputs.provider == 'gitea'
+    uses: ./.github/workflows/gitea-release.yml
     secrets:
       GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

CHANGELOG.md

@@ -1,5 +1,353 @@
 # Changelog
 
+## [1.3.42] - 2025-02-22
+### Changed
+- update webpages for version v1.3.42
+
+### Fixed
+- correct path for SPIFFS binary creation in Gitea release workflow
+
+
+## [1.3.41] - 2025-02-22
+### Changed
+- update webpages for version v1.3.41
+
+### Fixed
+- remove redundant buffer size setting in NFC initialization
+- update SPIFFS binary creation and enhance NFC buffer size
+
+
+## [1.3.40] - 2025-02-22
+### Changed
+- update webpages for version v1.3.40
+
+### Fixed
+- update SPIFFS binary header and enhance WebSocket error handling
+
+
+## [1.3.39] - 2025-02-22
+### Changed
+- update webpages for version v1.3.39
+- workflow: update SPIFFS binary creation to set chip version to max supported
+
+
+## [1.3.38] - 2025-02-22
+### Changed
+- update webpages for version v1.3.38
+- workflow: update SPIFFS binary creation with minimal ESP32 image header
+
+
+## [1.3.37] - 2025-02-22
+### Changed
+- update webpages for version v1.3.37
+- workflow: update ESP32-WROOM image header for SPIFFS binary creation
+
+
+## [1.3.36] - 2025-02-22
+### Changed
+- update webpages for version v1.3.36
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.35] - 2025-02-22
+### Changed
+- update webpages for version v1.3.35
+- partition: update SPIFFS binary header and offsets in workflow files
+
+
+## [1.3.34] - 2025-02-22
+### Changed
+- update webpages for version v1.3.34
+- partition: update SPIFFS binary creation and offsets in workflow files
+
+
+## [1.3.33] - 2025-02-22
+### Changed
+- update webpages for version v1.3.33
+- partition: update spiffs offset and app sizes in partition files
+- partition: update spiffs offset in partition files
+- partition: update app sizes and offsets in partitions.csv
+
+
+## [1.3.32] - 2025-02-22
+### Changed
+- update webpages for version v1.3.32
+- workflow: update magic byte for SPIFFS binary creation
+
+
+## [1.3.31] - 2025-02-22
+### Changed
+- update webpages for version v1.3.31
+- workflow: remove unnecessary data and SPIFFS change checks from release workflows
+
+
+## [1.3.30] - 2025-02-22
+### Changed
+- update webpages for version v1.3.30
+- workflow: update Gitea and GitHub release workflows to create SPIFFS binary with magic byte
+
+
+## [1.3.29] - 2025-02-21
+### Changed
+- update webpages for version v1.3.29
+- workflow: update Gitea release workflow to create release before file uploads
+
+
+## [1.3.28] - 2025-02-21
+### Changed
+- update webpages for version v1.3.28
+- workflow: update Gitea release workflow to use file uploads with curl
+
+
+## [1.3.27] - 2025-02-21
+### Added
+- workflow: add GITEA_TOKEN secret for Gitea API access in release workflows
+
+### Changed
+- update webpages for version v1.3.27
+
+
+## [1.3.26] - 2025-02-21
+### Changed
+- update webpages for version v1.3.26
+
+### Fixed
+- workflow: improve Gitea release workflow with enhanced error handling and debug outputs
+
+
+## [1.3.25] - 2025-02-21
+### Changed
+- update webpages for version v1.3.25
+- workflow: update Gitea release workflow to include RUNNER_NAME and improve error handling
+
+
+## [1.3.24] - 2025-02-21
+### Changed
+- update webpages for version v1.3.24
+- workflow: rename update files to upgrade in GitHub release workflow
+- workflow: aktualisiere bestehende Einträge im Changelog für vorhandene Versionen
+
+### Fixed
+- workflow: improve Gitea release process with dynamic URL determination and debug outputs
+
+
+## [1.3.23] - 2025-02-21
+### Changed
+- update webpages for version v1.3.23
+
+### Fixed
+- workflow: enhance Gitea release process with debug outputs and API connection checks
+
+
+## [1.3.22] - 2025-02-21
+### Added
+- workflow: improve Gitea release process with additional environment variables and error handling
+
+### Changed
+- update webpages for version v1.3.22
+
+
+## [1.3.21] - 2025-02-21
+### Changed
+- update webpages for version v1.3.21
+- workflow: enhance Gitea release process with API integration and token management
+
+
+## [1.3.20] - 2025-02-21
+### Changed
+- update webpages for version v1.3.20
+- workflow: enable git tagging and pushing for Gitea releases
+
+
+## [1.3.19] - 2025-02-21
+### Changed
+- update webpages for version v1.3.19
+- workflow: enable git push for version tagging in Gitea release
+
+
+## [1.3.18] - 2025-02-21
+### Changed
+- ACHTUNG: Installiere einmal das filaman_full.bin danach kannst du über die upgrade Files aktualisieren und deine Settings bleiben auch erhalten.
+- ATTENTION: Install the filaman_full.bin once, then you can update via the upgrade files and your settings will also be retained.
+
+
+
+## [1.3.18] - 2025-02-21
+### Added
+- add note about filaman_full.bin installation in changelog
+
+### Changed
+- update webpages for version v1.3.18
+- update changelog for version 1.3.18 and enhance update script for existing entries
+
+## [1.3.17] - 2025-02-21
+### Changed
+- update webpages for version v1.3.17
+- ci: comment out git tag and push commands in gitea-release workflow
+
+
+## [1.3.16] - 2025-02-21
+### Changed
+- update webpages for version v1.3.16
+- ci: update filenames for firmware and website binaries in release workflows
+
+
+## [1.3.15] - 2025-02-21
+### Changed
+- update webpages for version v1.3.15
+
+### Fixed
+- ci: fix missing 'fi' in GitHub release workflow script
+
+
+## [1.3.14] - 2025-02-21
+### Changed
+- update webpages for version v1.3.14
+- ci: update GitHub release workflow to improve file upload handling
+
+
+## [1.3.13] - 2025-02-21
+### Changed
+- update webpages for version v1.3.13
+- ci: update GitHub release workflow to use RELEASE_TOKEN for improved security
+
+
+## [1.3.12] - 2025-02-21
+### Changed
+- update webpages for version v1.3.12
+- ci: enhance GitHub release workflow with token handling and file upload improvements
+
+
+## [1.3.11] - 2025-02-21
+### Changed
+- update webpages for version v1.3.11
+- ci: refactor Gitea release workflow by simplifying input handling and removing unnecessary checks
+
+
+## [1.3.10] - 2025-02-21
+### Changed
+- update webpages for version v1.3.10
+- ci: simplify GitHub release workflow by removing provider verification step
+
+
+## [1.3.9] - 2025-02-21
+### Changed
+- update webpages for version v1.3.9
+- ci: comment out permissions for GitHub release workflow
+
+
+## [1.3.8] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.8
+
+
+## [1.3.7] - 2025-02-21
+### Added
+- add GitHub and Gitea release workflows
+
+### Changed
+- update webpages for version v1.3.7
+
+
+## [1.3.6] - 2025-02-21
+### Changed
+- update webpages for version v1.3.6
+
+### Fixed
+- update GitHub token reference and correct file path in release workflow
+
+
+## [1.3.5] - 2025-02-21
+### Added
+- enhance release workflow to support Gitea alongside GitHub
+
+### Changed
+- update webpages for version v1.3.5
+
+
+## [1.3.4] - 2025-02-21
+### Added
+- add Gitea and GitHub release workflows
+
+### Changed
+- update webpages for version v1.3.4
+- Merge branch 'old'
+
+
+## [1.3.3] - 2025-02-21
+### Changed
+- update webpages for version v1.3.3
+
+### Fixed
+- correct directory path in GitHub workflows for SPIFFS binary
+
+
+## [1.3.2] - 2025-02-21
+### Added
+- add missing conditional exit in release workflow
+
+### Changed
+- update webpages for version v1.3.2
+
+
+## [1.3.1] - 2025-02-21
+### Added
+- enhance GitHub and Gitea release workflows with Python setup and binary preparation
+
+### Changed
+- update webpages for version v1.3.1
+
+
+## [1.3.0] - 2025-02-21
+### Changed
+- bump version to 1.3.0 in platformio.ini
+
+
+## [1.2.102] - 2025-02-21
+### Changed
+- update webpages for version v1.2.102
+
+### Fixed
+- adjust bootloader offset in binary merge for Gitea and GitHub workflows
+
+
+## [1.2.101] - 2025-02-21
+### Changed
+- update webpages for version v1.2.101
+- always create SPIFFS binary in release workflows
+- migrate calibration value storage from EEPROM to NVS
+
+
+## [1.2.100] - 2025-02-21
+### Changed
+- update webpages for version v1.2.100
+- remove OTA handling and JSON backup/restore functions
+
+
+## [1.2.99] - 2025-02-21
+### Added
+- add SPIFFS change detection and binary copying to release workflows
+- add backup and restore functions for JSON configurations during OTA updates
+
+### Changed
+- update webpages for version v1.2.99
+- update JSON field type checks from JsonObject to String for improved validation
+- update JSON handling in API and Bambu modules for improved object management
+- update platformio.ini dependencies and improve version handling in website.cpp
+- update Cache-Control header to reflect a 1-week duration
+- remove version definition from website.cpp
+- optimize WiFi and WebSocket settings; enhance TCP/IP stack configuration
+- update upgrade page title and heading; adjust cache control duration
+
+
+## [1.2.98] - 2025-02-21
+### Changed
+- update webpages for version v1.2.98
+
+
 ## [1.2.97] - 2025-02-21
 ### Changed
 - update webpages for version v1.2.97

html/upgrade.html

@@ -1,9 +1,10 @@
-<!DOCTYPE html>
+<!-- head --><!DOCTYPE html>
 <html lang="en">
 <head>
     <meta charset="UTF-8">
     <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <title>FilaMan - Firmware Update</title>
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
     <script>
         fetch('/api/version')
@@ -49,7 +50,8 @@
 <!-- head -->
     
     <div class="content">
-        <h1>System Update</h1>
+        <h1>Firmware Upgrade</h1>
+
         <div class="warning">
             <strong>Warning:</strong> Do not power off the device during update.
         </div>
@@ -79,7 +81,7 @@
         </div>
 
         <div class="progress-container" style="display: none;">
-            <div class="progress-bar">0%</</div>
+            <div class="progress-bar">0%</div>
         </div>
         <div class="status"></div>
     </div>
@@ -104,6 +106,42 @@
             color: #666;
             margin-bottom: 1rem;
         }
+        .progress-container {
+            margin: 20px 0;
+            background: #f0f0f0;
+            border-radius: 4px;
+            overflow: hidden;
+        }
+        .progress-bar {
+            width: 0;
+            height: 20px;
+            background: #4CAF50;
+            transition: width 0.3s ease-in-out;
+            text-align: center;
+            line-height: 20px;
+            color: white;
+        }
+        .status {
+            margin-top: 20px;
+            padding: 10px;
+            border-radius: 4px;
+            display: none;
+        }
+        .status.success {
+            background: #e8f5e9;
+            color: #2e7d32;
+        }
+        .status.error {
+            background: #ffebee;
+            color: #c62828;
+        }
+        .warning {
+            background: #fff3e0;
+            color: #e65100;
+            padding: 15px;
+            border-radius: 4px;
+            margin-bottom: 20px;
+        }
     </style>
 
     <script>
@@ -113,8 +151,13 @@
             statusContainer.style.display = 'none';
         }
 
+        const progress = document.querySelector('.progress-bar');
+        const progressContainer = document.querySelector('.progress-container');
+        const status = document.querySelector('.status');
+
         function handleUpdate(e) {
             e.preventDefault();
+            const form = e.target;
             const file = form.update.files[0];
             const updateType = form.dataset.type;
 
@@ -124,33 +167,23 @@
             }
 
             // Validate file name pattern
-            if (updateType === 'firmware' && !file.name.startsWith('filaman_')) {
-                alert('Please select a valid firmware file (filaman_*.bin)');
+            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
+                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
                 return;
             }
-            if (updateType === 'webpage' && !file.name.startsWith('webpage_')) {
-                alert('Please select a valid webpage file (webpage_*.bin)');
+            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
+                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
                 return;
             }
-
-            log(`Selected file: ${file.name} (${file.size} bytes)`);
-            
-            // Aktiviere Fortschrittsanzeige
-            progress.style.display = 'block';
-            form.style.display = 'none';
-
-            // Erstelle FormData für den Upload
-            const formData = new FormData();
-            formData.append('update', file);
-            
-            const progress = document.querySelector('.progress-bar');
-            const progressContainer = document.querySelector('.progress-container');
-            const status = document.querySelector('.status');
             
             progressContainer.style.display = 'block';
             status.style.display = 'none';
             status.className = 'status';
 
+            // Reset progress bar
+            progress.style.width = '0%';
+            progress.textContent = '0%';
+
             // Disable both forms during update
             document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
 
@@ -169,6 +202,16 @@
                     let response = this.responseText;
                     try {
                         const jsonResponse = JSON.parse(response);
+                        
+                        // Handle progress updates
+                        if (jsonResponse.progress !== undefined) {
+                            const percent = jsonResponse.progress;
+                            progress.style.width = percent + '%';
+                            progress.textContent = Math.round(percent) + '%';
+                            return;
+                        }
+                        
+                        // Handle success/error messages
                         response = jsonResponse.message;
                         
                         if (jsonResponse.restart) {
@@ -185,12 +228,9 @@
                             }, 1000);
                         }
                     } catch (e) {
-                        if (!isNaN(response)) {
-                            const percent = parseInt(response);
-                            progress.style.width = percent + '%';
-                            progress.textContent = percent + '%';
-                            return;
-                        }
+                        console.error('JSON parse error:', e);
+                        status.textContent = 'Update failed: Invalid response from server';
+                        status.classList.add('error');
                     }
                     
                     status.textContent = response;
@@ -215,6 +255,8 @@
                 document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
             };
 
+            const formData = new FormData();
+            formData.append('update', file);
             xhr.send(formData);
         }
 

partitions.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType,    Offset,   Size,     Flags
 nvs,      data, nvs,       0x9000,   0x5000,
 otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,     0x10000,  0x180000,
-app1,     app,  ota_1,     0x190000, 0x180000,
-spiffs,   data, spiffs,    0x310000, 0xE0000,
+app0,     app,  ota_0,     0x10000,  0x1E0000,
+app1,     app,  ota_1,     0x1F0000, 0x1E0000,
+spiffs,   data, spiffs,    0x3D0000, 0x30000,

platformio.ini

@@ -9,7 +9,9 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.97"
+version = "1.3.42"
+
+#test
 
 [env:esp32dev]
 platform = espressif32
@@ -19,10 +21,11 @@ monitor_speed = 115200
 
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
-    #https://github.com/me-no-dev/ESPAsyncWebServer.git#master
+    https://github.com/me-no-dev/ESPAsyncWebServer.git#master
     #me-no-dev/AsyncTCP @ ^1.1.1
-    mathieucarbou/ESPAsyncWebServer @ ^3.6.0
-    esp32async/AsyncTCP @ ^3.3.5
+    https://github.com/esphome/AsyncTCP.git
+    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
+    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -45,15 +48,16 @@ build_flags =
     -fdata-sections
     -DNDEBUG
     -mtext-section-literals
-    '-D VERSION="${common.version}"'
+    -DVERSION=\"${common.version}\"
     -DASYNCWEBSERVER_REGEX
     -DCORE_DEBUG_LEVEL=3
     -DCONFIG_ARDUHAL_LOG_COLORS=1
     -DOTA_DEBUG=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
     -DBOOT_APP_PARTITION_OTA_0=1
-    -DCONFIG_LOG_DEFAULT_LEVEL=3
+    -DCONFIG_LWIP_TCP_MSL=60000
+    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     
 extra_scripts = 
     scripts/extra_script.py

scripts/update_changelog.py

@@ -122,7 +122,29 @@ def update_changelog():
                 f.write(updated_content)
             push_changes(version)
         else:
-            print(f"Version {version} already exists in changelog")
+            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
+            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
+            
+            # Finde den Start der aktuellen Version
+            version_match = re.search(version_pattern, content)
+            if version_match:
+                version_start = version_match.start()
+                # Suche nach der nächsten Version
+                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
+                
+                if next_version_match:
+                    # Ersetze den Inhalt zwischen aktueller und nächster Version
+                    next_version_pos = version_start + 1 + next_version_match.start()
+                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
+                else:
+                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
+                    updated_content = content[:version_start] + changelog_entry + "\n"
+                
+                with open(changelog_path, 'w') as f:
+                    f.write(updated_content)
+                push_changes(version)
+                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/api.cpp

@@ -60,10 +60,10 @@ JsonDocument fetchSpoolsForWebsite() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["sm_id"] = spool["id"];
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
@@ -73,7 +73,7 @@ JsonDocument fetchSpoolsForWebsite() {
                 filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
                 filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
             }
@@ -110,13 +110,13 @@ JsonDocument fetchAllSpoolsInfo() {
             JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
             for (JsonObject spool : spools) {
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+                JsonObject filteredSpool = filteredSpools.add<JsonObject>();
                 filteredSpool["price"] = spool["price"];
                 filteredSpool["remaining_weight"] = spool["remaining_weight"];
                 filteredSpool["used_weight"] = spool["used_weight"];
                 filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                JsonObject filament = filteredSpool["filament"].to<JsonObject>();
                 filament["id"] = spool["filament"]["id"];
                 filament["name"] = spool["filament"]["name"];
                 filament["material"] = spool["filament"]["material"];
@@ -125,11 +125,11 @@ JsonDocument fetchAllSpoolsInfo() {
                 filament["spool_weight"] = spool["filament"]["spool_weight"];
                 filament["color_hex"] = spool["filament"]["color_hex"];
 
-                JsonObject vendor = filament.createNestedObject("vendor");
+                JsonObject vendor = filament["vendor"].to<JsonObject>();
                 vendor["id"] = spool["filament"]["vendor"]["id"];
                 vendor["name"] = spool["filament"]["vendor"]["name"];
 
-                JsonObject extra = filament.createNestedObject("extra");
+                JsonObject extra = filament["extra"].to<JsonObject>();
                 extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
                 extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
                 extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
@@ -186,7 +186,7 @@ bool updateSpoolTagId(String uidString, const char* payload) {
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
+    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
         return false;
     }
@@ -368,7 +368,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
+                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -430,7 +430,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc.containsKey("status")) {
+            if (!error && doc["status"].is<String>()) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -469,7 +469,7 @@ bool saveSpoolmanUrl(const String& url) {
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/bambu.cpp

@@ -58,7 +58,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
@@ -270,9 +270,9 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     }
 
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"].containsKey("upgrade_state")) {
+    if (doc["print"]["upgrade_state"].is<String>()) {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
+        if (!doc["print"]["ams"].is<String>() || !doc["print"]["ams"]["ams"].is<String>()) {
             return;
         }
 
@@ -315,7 +315,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +363,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"].containsKey("vt_tray")) {
+        if (doc["print"]["vt_tray"].is<String>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -387,14 +387,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         JsonArray wsArray = wsDoc.to<JsonArray>();
 
         for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.createNestedObject();
+            JsonObject amsObj = wsArray.add<JsonObject>();
             amsObj["ams_id"] = ams_data[i].ams_id;
 
-            JsonArray trays = amsObj.createNestedArray("tray");
+            JsonArray trays = amsObj["tray"].to<JsonArray>();
             int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
             
             for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.createNestedObject();
+                JsonObject trayObj = trays.add<JsonObject>();
                 trayObj["id"] = ams_data[i].trays[j].id;
                 trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
                 trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
@@ -427,14 +427,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 JsonArray wsArray = wsDoc.to<JsonArray>();
 
                 for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.createNestedObject();
+                    JsonObject amsObj = wsArray.add<JsonObject>();
                     amsObj["ams_id"] = ams_data[j].ams_id;
 
-                    JsonArray trays = amsObj.createNestedArray("tray");
+                    JsonArray trays = amsObj["tray"].to<JsonArray>();
                     int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
                     
                     for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.createNestedObject();
+                        JsonObject trayObj = trays.add<JsonObject>();
                         trayObj["id"] = ams_data[j].trays[k].id;
                         trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
                         trayObj["tray_type"] = ams_data[j].trays[k].tray_type;

src/main.cpp

@@ -19,6 +19,12 @@
 void setup() {
   Serial.begin(115200);
 
+  uint64_t chipid;
+
+  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
+  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
+  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
+
   // Initialize SPIFFS
   initializeSPIFFS();
 

src/ota.cpp

@@ -1,240 +0,0 @@
-#include <Arduino.h>
-#include "ota.h"
-#include <Update.h>
-#include <SPIFFS.h>
-#include "commonFS.h"
-#include "bambu.h"
-#include "scale.h"
-#include "nfc.h"
-
-#define UPLOAD_TIMEOUT_MS 60000  // 60 Sekunden Timeout für den gesamten Upload
-#define CHUNK_RESPONSE_TIMEOUT_MS 10000  // 10 Sekunden Timeout pro Chunk
-#define MAX_FAILED_CHUNKS 3  // Maximale Anzahl fehlgeschlagener Chunks bevor Abbruch
-#define MAX_FILE_SIZE 4194304    // 4MB Limit
-
-static bool tasksAreStopped = false;
-static uint32_t lastChunkTime = 0;
-static size_t failedChunks = 0;
-static size_t expectedOffset = 0;
-static size_t totalSize = 0;
-
-void stopAllTasks() {
-    Serial.println("Stopping RFID Reader");
-    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
-    Serial.println("Stopping Bambu");
-    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
-    Serial.println("Stopping Scale");
-    if (ScaleTask) vTaskSuspend(ScaleTask);
-    vTaskDelay(100 / portTICK_PERIOD_MS);
-    Serial.println("All tasks stopped");
-}
-
-void performStageTwo() {
-    if (!SPIFFS.begin(true)) {
-        Serial.println("Error: Could not mount SPIFFS for stage 2");
-        return;
-    }
-
-    File firmwareFile = SPIFFS.open("/firmware.bin", "r");
-    if (!firmwareFile) {
-        Serial.println("Error: Could not open firmware.bin from SPIFFS");
-        return;
-    }
-
-    size_t firmwareSize = firmwareFile.size();
-    size_t maxAppSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000;
-
-    Serial.printf("Stage 2 - Firmware size: %u bytes\n", firmwareSize);
-    Serial.printf("Available space: %u bytes\n", maxAppSpace);
-
-    if (firmwareSize > maxAppSpace) {
-        Serial.printf("Error: Not enough space for firmware. Need %u bytes but only have %u bytes\n", 
-                    firmwareSize, maxAppSpace);
-        return;
-    }
-
-    if (!Update.begin(firmwareSize)) {
-        Update.printError(Serial);
-        return;
-    }
-
-    size_t written = Update.writeStream(firmwareFile);
-    if (written != firmwareSize) {
-        Update.printError(Serial);
-        return;
-    }
-
-    if (!Update.end(true)) {
-        Update.printError(Serial);
-        return;
-    }
-
-    firmwareFile.close();
-    SPIFFS.remove("/firmware.bin"); // Cleanup
-    Serial.println("Stage 2 update successful, restarting...");
-    delay(500);
-    ESP.restart();
-}
-
-void checkForStagedUpdate() {
-    if (!SPIFFS.begin(true)) {
-        return;
-    }
-
-    if (SPIFFS.exists("/firmware.bin")) {
-        Serial.println("Found staged firmware update, initiating stage 2...");
-        performStageTwo();
-    }
-}
-
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
-    static File stagingFile;
-    static uint32_t uploadStartTime = 0;
-    
-    if (!index) {
-        // Überprüfe Gesamtgröße im Header
-        if (request->hasHeader("X-Total-Size")) {
-            totalSize = request->header("X-Total-Size").toInt();
-            if (totalSize > MAX_FILE_SIZE) {
-                request->send(413, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"File too large\"}");
-                return;
-            }
-        }
-
-        uploadStartTime = millis();
-        lastChunkTime = millis();
-        expectedOffset = 0;
-        failedChunks = 0;
-        
-        bool isSpiffsUpdate = filename.endsWith("_spiffs.bin");
-        Serial.printf("Update Start: %s (type: %s)\n", filename.c_str(), isSpiffsUpdate ? "SPIFFS" : "OTA");
-        Serial.printf("Total size: %u bytes\n", totalSize);
-        
-        // Überprüfe Header für Chunk-Informationen
-        if (request->hasHeader("X-Chunk-Offset")) {
-            String offsetStr = request->header("X-Chunk-Offset");
-            expectedOffset = offsetStr.toInt();
-        }
-
-        if (request->contentLength() == 0) {
-            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
-            return;
-        }
-
-        if (!tasksAreStopped) {
-            stopAllTasks();
-            tasksAreStopped = true;
-        }
-
-        if (isSpiffsUpdate) {
-            if (!SPIFFS.begin(true)) {
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Could not mount SPIFFS\"}");
-                return;
-            }
-            
-            if (!Update.begin(totalSize > 0 ? totalSize : request->contentLength(), U_SPIFFS)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"SPIFFS update initialization failed\"}");
-                return;
-            }
-        } else {
-            stagingFile = SPIFFS.open("/firmware.bin", "w");
-            if (!stagingFile) {
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Could not create staging file\"}");
-                return;
-            }
-        }
-    }
-
-    // Chunk Validierung
-    if (request->hasHeader("X-Chunk-Offset")) {
-        size_t chunkOffset = request->header("X-Chunk-Offset").toInt();
-        if (chunkOffset != expectedOffset) {
-            failedChunks++;
-            if (failedChunks >= MAX_FAILED_CHUNKS) {
-                if (stagingFile) {
-                    stagingFile.close();
-                    SPIFFS.remove("/firmware.bin");
-                }
-                Update.abort();
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Too many failed chunks\"}");
-                return;
-            }
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Invalid chunk offset\"}");
-            return;
-        }
-    }
-
-    // Timeout Überprüfungen
-    uint32_t currentTime = millis();
-    if (currentTime - uploadStartTime > UPLOAD_TIMEOUT_MS) {
-        if (stagingFile) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-        }
-        Update.abort();
-        request->send(408, "application/json", "{\"status\":\"error\",\"message\":\"Upload timeout\"}");
-        return;
-    }
-
-    if (currentTime - lastChunkTime > CHUNK_RESPONSE_TIMEOUT_MS) {
-        if (stagingFile) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-        }
-        Update.abort();
-        request->send(408, "application/json", "{\"status\":\"error\",\"message\":\"Chunk timeout\"}");
-        return;
-    }
-    lastChunkTime = currentTime;
-
-    if (stagingFile) {
-        size_t written = stagingFile.write(data, len);
-        if (written != len) {
-            stagingFile.close();
-            SPIFFS.remove("/firmware.bin");
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Write to SPIFFS failed\"}");
-            return;
-        }
-    } else {
-        if (Update.write(data, len) != len) {
-            Update.printError(Serial);
-            request->send(400, "application/json", 
-                        "{\"status\":\"error\",\"message\":\"Write failed\"}");
-            return;
-        }
-    }
-
-    expectedOffset += len;
-
-    if (final) {
-        if (stagingFile) {
-            stagingFile.close();
-            Serial.println("Stage 1 complete - firmware staged in SPIFFS");
-            request->send(200, "application/json", 
-                        "{\"status\":\"success\",\"message\":\"Update staged successfully! Starting stage 2...\"}");
-            delay(100);
-            performStageTwo();
-        } else {
-            if (!Update.end(true)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", 
-                            "{\"status\":\"error\",\"message\":\"Update failed\"}");
-                return;
-            }
-            Serial.println("SPIFFS update successful, restarting...");
-            request->send(200, "application/json", 
-                        "{\"status\":\"success\",\"message\":\"SPIFFS update successful! Device will restart...\",\"restart\":true}");
-            delay(500);
-            ESP.restart();
-        }
-    }
-}
-

src/ota.h

@@ -1,15 +0,0 @@
-#ifndef OTA_H
-#define OTA_H
-
-#include <ESPAsyncWebServer.h>
-
-// Update size unknown constant, falls nicht bereits definiert
-#ifndef UPDATE_SIZE_UNKNOWN
-#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
-#endif
-
-void stopAllTasks();
-void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
-void checkForStagedUpdate();
-
-#endif

src/scale.cpp

@@ -3,9 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
-#include <EEPROM.h>
 #include "display.h"
 #include "esp_task_wdt.h"
+#include <Preferences.h>
 
 HX711 scale;
 
@@ -17,6 +17,10 @@ uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
 
+Preferences preferences;
+const char* NVS_NAMESPACE = "scale";
+const char* NVS_KEY_CALIBRATION = "cal_value";
+
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
   Serial.println("Tare scale");
@@ -48,13 +52,12 @@ void scale_loop(void * parameter) {
 
 void start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue; // calibration value (see example file "Calibration.ino")
-  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
+  long calibrationValue;
 
-  EEPROM.begin(512);
-  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
-
-  //calibrationValue = EEPROM.read(calVal_eepromAdress);
+  // NVS
+  preferences.begin(NVS_NAMESPACE, true); // true = readonly
+  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
+  preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
@@ -137,18 +140,19 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
-      Serial.print("Save this value to EEPROM adress ");
-      Serial.println(calVal_eepromAdress);
 
-      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      EEPROM.commit();
+      // Speichern mit NVS
+      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
+      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.end();
 
-      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
-      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
+      // Verifizieren
+      preferences.begin(NVS_NAMESPACE, true);
+      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      preferences.end();
 
-      Serial.print("Read Value ");
-      Serial.println(newCalibrationValue);
+      Serial.print("Verified stored value: ");
+      Serial.println(verifyValue);
 
       Serial.println("End calibration, revome weight");
 

src/website.cpp

@@ -7,12 +7,15 @@
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
-#include "ota.h"
 #include <Update.h>
+#include "display.h"
+
+#ifndef VERSION
+  #define VERSION "1.1.0"
+#endif
 
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
-#define VERSION "1.0.0"
+#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -30,6 +33,10 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
+    } else if (type == WS_EVT_ERROR) {
+        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
+    } else if (type == WS_EVT_PONG) {
+        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
@@ -46,7 +53,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc.containsKey("payload")) {
+            if (doc["payload"].is<String>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -153,11 +160,15 @@ void sendNfcData(AsyncWebSocketClient *client) {
 
 void sendAmsData(AsyncWebSocketClient *client) {
     if (ams_count > 0) {
-        ws.textAll("{\"type\":\"amsData\", \"payload\":" + amsJsonData + "}");
+        ws.textAll("{\"type\":\"amsData\",\"payload\":" + amsJsonData + "}");
     }
 }
 
 void setupWebserver(AsyncWebServer &server) {
+    // WebSocket-Optimierungen
+    ws.onEvent(onWsEvent);
+    ws.enable(true);
+
     // Konfiguriere Server für große Uploads
     server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
     server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
@@ -228,7 +239,7 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
@@ -367,22 +378,37 @@ void setupWebserver(AsyncWebServer &server) {
             request->send(response);
             
             if (success) {
+                oledShowMessage("Upgrade successful Rebooting");
                 delay(500);
                 ESP.restart();
             }
+            else {
+                oledShowMessage("Upgrade failed");
+            }
         },
         [](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
             static size_t updateSize = 0;
             static int command = 0;
 
+            oledShowMessage("Upgrade please wait");
+
+            // TODO: Backup
+
             if (!index) {
                 updateSize = request->contentLength();
                 command = (filename.indexOf("spiffs") > -1) ? U_SPIFFS : U_FLASH;
-                Serial.printf("Update Start: %s\nSize: %u\nCommand: %d\n", filename.c_str(), updateSize, command);
-
-                if (!Update.begin(updateSize, command)) {
-                    Serial.printf("Update Begin Error: ");
-                    Update.printError(Serial);
+                
+                if (command == U_SPIFFS) {
+                    // Backup JSON config files before SPIFFS update
+                    backupJsonConfigs();
+                }
+                
+                // Setze spezifische Update-Flags für SPIFFS-Updates
+                if (!Update.begin(updateSize, command, command == U_SPIFFS ? true : false, command == U_SPIFFS ? 0 : -1)) {
+                    if (command == U_SPIFFS) {
+                        // Restore JSON config files if update fails at start
+                        restoreJsonConfigs();
+                    }
                     String errorMsg = String("Update begin failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
@@ -391,30 +417,37 @@ void setupWebserver(AsyncWebServer &server) {
 
             if (len) {
                 if (Update.write(data, len) != len) {
-                    Serial.printf("Update Write Error: ");
-                    Update.printError(Serial);
+                    if (command == U_SPIFFS) {
+                        // Restore JSON config files if update fails during write
+                        restoreJsonConfigs();
+                    }
                     String errorMsg = String("Write failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
                 }
-                Serial.printf("Progress: %u/%u\r", index + len, updateSize);
+                
+                // Sende den Fortschritt als JSON, um unerwünschte Zeilenumbrüche zu vermeiden
+                String progress = "{\"progress\":" + String((index + len) * 100 / updateSize) + "}";
+                request->send(200, "application/json", progress);
             }
 
             if (final) {
                 if (!Update.end(true)) {
-                    Serial.printf("Update End Error: ");
-                    Update.printError(Serial);
+                    if (command == U_SPIFFS) {
+                        // Restore JSON config files if update fails at end
+                        restoreJsonConfigs();
+                    }
                     String errorMsg = String("Update end failed: ") + Update.errorString();
                     request->send(400, "application/json", "{\"success\":false,\"message\":\"" + errorMsg + "\"}");
                     return;
                 }
-                Serial.printf("\nUpdate Success: %uB\n", index+len);
             }
         }
     );
 
     server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
-        String jsonResponse = "{\"version\": \"" VERSION "\"}";
+        String fm_version = VERSION;
+        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
         request->send(200, "application/json", jsonResponse);
     });
 
@@ -435,50 +468,25 @@ void setupWebserver(AsyncWebServer &server) {
     Serial.println("Webserver gestartet");
 }
 
-void handleOTAUpload(AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-    if (!index) {
-        // Start eines neuen Uploads
-        Serial.println("Update Start: " + filename);
-        
-        // Überprüfe den Dateityp basierend auf dem Dateinamen
-        bool isFirmware = filename.startsWith("filaman_");
-        bool isWebpage = filename.startsWith("webpage_");
-        
-        if (!isFirmware && !isWebpage) {
-            request->send(400, "application/json", "{\"message\":\"Invalid file type. File must start with 'filaman_' or 'webpage_'\"}");
-            return;
-        }
 
-        // Wähle den Update-Typ basierend auf dem Dateinamen
-        if (isWebpage) {
-            if (!Update.begin(SPIFFS.totalBytes(), U_SPIFFS)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"SPIFFS Update failed: " + String(Update.errorString()) + "\"}");
-                return;
-            }
-        } else {
-            if (!Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH)) {
-                Update.printError(Serial);
-                request->send(400, "application/json", "{\"message\":\"Firmware Update failed: " + String(Update.errorString()) + "\"}");
-                return;
-            }
+void backupJsonConfigs() {
+    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    for (const char* config : configs) {
+        if (SPIFFS.exists(config)) {
+            String backupPath = String(config) + ".bak";
+            SPIFFS.remove(backupPath);
+            SPIFFS.rename(config, backupPath);
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    const char* configs[] = {"/bambu_credentials.json", "/spoolman_url.json"};
+    for (const char* config : configs) {
+        String backupPath = String(config) + ".bak";
+        if (SPIFFS.exists(backupPath)) {
+            SPIFFS.remove(config);
+            SPIFFS.rename(backupPath, config);
         }
     }
-
-    if (Update.write(data, len) != len) {
-        Update.printError(Serial);
-        request->send(400, "application/json", "{\"message\":\"Write failed: " + String(Update.errorString()) + "\"}");
-        return;
-    }
-
-    if (final) {
-        if (!Update.end(true)) {
-            Update.printError(Serial);
-            request->send(400, "application/json", "{\"message\":\"Update failed: " + String(Update.errorString()) + "\"}");
-            return;
-        }
-        request->send(200, "application/json", "{\"message\":\"Update successful!\", \"restart\": true}");
-        delay(500);
-        ESP.restart();
-    }
 }

src/website.h

@@ -29,4 +29,8 @@ void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
+// Upgrade-Funktionen
+void backupJsonConfigs();
+void restoreJsonConfigs();
+
 #endif

src/wlan.cpp

@@ -10,11 +10,19 @@ WiFiManager wm;
 bool wm_nonblocking = false;
 
 void initWiFi() {
+    // Optimierte WiFi-Einstellungen
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
     WiFi.setSleep(false); // disable sleep mode
     esp_wifi_set_ps(WIFI_PS_NONE);
+    
+    // Maximale Sendeleistung
+    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
   
-    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    // Optimiere TCP/IP Stack
+    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
+    
+    // Aktiviere WiFi-Roaming für bessere Stabilität
+    esp_wifi_set_rssi_threshold(-80);
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen