feat: update release workflow trigger and increment version to 1.0.6

chore: remove unnecessary blank line in release workflow configuration
feat: enhance release workflow by adding permissions for issues and pull requests, and updating GitHub CLI installation method
2025-02-16 12:11:30 +01:00 · 2025-02-16 12:07:14 +01:00 · 2025-02-16 12:05:50 +01:00 · 2025-02-16 12:01:41 +01:00 · 2025-02-16 11:59:34 +01:00 · 2025-02-16 11:58:04 +01:00
46 changed files with 1594 additions and 673 deletions
--- a/.github/workflows/release.yml
+++ b/.github/workflows/release.yml
@ -0,0 +1,77 @@
+name: Create Release
+
+on:
+  push:
+    tags:
+      - 'v*'
+
+permissions:
+  contents: write      # Required for creating releases
+  issues: read        # Required for reading changelog
+  pull-requests: read # Required for reading changelog
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write # Required for creating releases at job level
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio
+    
+    - name: Build Firmware
+      run: |
+        pio run -t buildfs  # Build SPIFFS
+        pio run            # Build firmware
+        
+    - name: Install esptool
+      run: |
+        pip install esptool
+        
+    - name: Merge firmware and SPIFFS
+      run: |
+        esptool.py --chip esp32 merge_bin \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o .pio/build/esp32dev/filaman.bin \
+          0x10000 .pio/build/esp32dev/firmware.bin \
+          0x290000 .pio/build/esp32dev/spiffs.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+    
+    - name: Install and Configure GitHub CLI
+      run: |
+        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
+        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
+        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
+        && sudo apt update \
+        && sudo apt install gh -y
+        
+    - name: Create Release with GitHub CLI
+      env:
+        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}  # Changed from GITHUB_TOKEN to GH_TOKEN
+      run: |
+        gh release create "${{ github.ref_name }}" \
+          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
+          --notes "${{ steps.changelog.outputs.CHANGES }}" \
+          ".pio/build/esp32dev/filaman.bin#filaman.bin"
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -0,0 +1,36 @@
+# Changelog
+
+## [1.0.5] - 2025-02-16
+### Added
+- update version to 1.0.5 and enhance changelog update process with automatic git push
+- update changelog script to categorize commits and handle new changelog creation
+- improve changelog update script to handle absolute paths and create new changelog if missing
+
+
+## [1.0.4] - 2025-02-16
+### Added
+- improve changelog update script to handle absolute paths and create new changelog if missing
+
+
+## [1.0.3] - 2025-02-16
+### Added
+- 
+
+### Changed
+-
+
+### Fixed
+-
+
+## [1.0.2] - 2025-02-16
+### Added
+- Feature 1
+- Feature 2
+
+### Changed
+- Change 1
+- Change 2
+
+### Fixed
+- Fix 1
+- Fix 2
--- a/README.de.md
+++ b/README.de.md
@ -0,0 +1,155 @@
+# FilaMan - Filament Management System
+
+FilaMan ist ein Filament-Managementsystem für den 3D-Druck. Es verwendet ESP32-Hardware für Gewichtsmessungen und NFC-Tag-Management. 
+Benutzer können Filamentspulen verwalten, den Status des Automatic Material System (AMS) von Bablulab Druckern überwachen und Einstellungen über eine Weboberfläche vornehmen. 
+Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/Spoolman) Filamentverwaltung, zusätzlich mit [Bambulab](https://bambulab.com/en-us) 3D-Druckern und sowie dem [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG Format.
+
+![Scale](./img/scale_trans.png)
+
+Weitere Bilder finden Sie im [img Ordner](/img/)  
+oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
+Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+
+### ESP32 Hardware-Funktionen
+- **Gewichtsmessung:** Verwendung einer Wägezelle mit HX711-Verstärker für präzise Gewichtsverfolgung.
+- **NFC-Tag Lesen/Schreiben:** PN532-Modul zum Lesen und Schreiben von Filamentdaten auf NFC-Tags.
+- **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
+- **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
+- **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
+- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+
+### Weboberflächen-Funktionen
+- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
+- **NFC-Tag-Verwaltung:** 
+    - Filamentdaten auf NFC-Tags schreiben.
+    - Verwendet das NFC-Tag-Format von [Openspool](https://github.com/spuder/OpenSpool)
+    - Ermöglicht automatische Spulenerkennung im AMS
+- **Bambulab AMS-Integration:** 
+  - Anzeige der aktuellen AMS-Fachbelegung.
+  - Zuordnung von Filamenten zu AMS-Slots.
+  - Unterstützung für externe Spulenhalter.
+- **Spoolman-Integration:**
+  - Auflistung verfügbarer Filamentspulen.
+  - Filtern und Auswählen von Filamenten.
+  - Automatische Aktualisierung der Spulengewichte.
+  - Verfolgung von NFC-Tag-Zuweisungen.
+
+### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
+
+## Detaillierte Funktionalität
+
+### ESP32-Funktionalität
+- **Druckaufträge steuern und überwachen:** Der ESP32 kommuniziert mit dem Bambu Lab Drucker.
+- **Drucker-Kommunikation:** Nutzt MQTT für Echtzeit-Kommunikation mit dem Drucker.
+- **Benutzerinteraktionen:** Das OLED-Display bietet sofortiges Feedback zum Systemstatus.
+
+### Weboberflächen-Funktionalität
+- **Benutzerinteraktionen:** Die Weboberfläche ermöglicht Benutzern die Interaktion mit dem System.
+- **UI-Elemente:** Enthält Dropdown-Menüs für Hersteller und Filamente, Buttons zum Beschreiben von NFC-Tags und Echtzeit-Statusanzeigen.
+
+## Hardware-Anforderungen
+
+### Komponenten
+- **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
+[Amazon Link](https://amzn.eu/d/aXThslf)
+- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
+[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+- **OLED Display:** 128x64 SSD1306.
+[Amazon Link](https://amzn.eu/d/dozAYDU)
+- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
+[Amazon Link](https://amzn.eu/d/8205DDh)
+- **NFC-Tag:** NTAG215
+[Amazon Link](https://amzn.eu/d/fywy4c4)
+
+### Pin-Konfiguration
+| Komponente        | ESP32 Pin |
+|-------------------|-----------|
+| HX711 DOUT        | 16        |
+| HX711 SCK         | 17        |
+| OLED SDA          | 21        |
+| OLED SCL          | 22        |
+| PN532 IRQ         | 32        |
+| PN532 RESET       | 33        |
+| PN532 SCK         | 14        |
+| PN532 MOSI        | 13        |
+| PN532 MISO        | 12        |
+| PN532 CS/SS       | 15        |
+
+## Software-Abhängigkeiten
+
+### ESP32-Bibliotheken
+- `WiFiManager`: Netzwerkkonfiguration
+- `ESPAsyncWebServer`: Webserver-Funktionalität
+- `ArduinoJson`: JSON-Verarbeitung
+- `PubSubClient`: MQTT-Kommunikation
+- `Adafruit_PN532`: NFC-Funktionalität
+- `Adafruit_SSD1306`: OLED-Display-Steuerung
+- `HX711`: Wägezellen-Kommunikation
+
+## Installation
+
+### Voraussetzungen
+- **Software:**
+  - [PlatformIO](https://platformio.org/) in VS Code
+  - [Spoolman](https://github.com/Donkie/Spoolman) Instanz
+- **Hardware:**
+  - ESP32 Entwicklungsboard
+  - HX711 Wägezellen-Verstärker
+  - Wägezelle (Gewichtssensor)
+  - OLED Display (128x64 SSD1306)
+  - PN532 NFC Modul
+  - Verbindungskabel
+
+### Schritt-für-Schritt Installation
+1. **Repository klonen:**
+    ```bash
+    git clone https://github.com/ManuelW77/Filaman.git
+    cd FilaMan
+    ```
+2. **Abhängigkeiten installieren:**
+    ```bash
+    pio lib install
+    ```
+3. **ESP32 flashen:**
+    ```bash
+    pio run --target upload
+    ```
+4. **Ersteinrichtung:**
+    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
+    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
+    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
+
+## Dokumentation
+
+### Relevante Links
+- [PlatformIO Dokumentation](https://docs.platformio.org/)
+- [Spoolman Dokumentation](https://github.com/Donkie/Spoolman)
+- [Bambu Lab Drucker Dokumentation](https://www.bambulab.com/)
+
+### Tutorials und Beispiele
+- [PlatformIO erste Schritte](https://docs.platformio.org/en/latest/tutorials/espressif32/arduino_debugging_unit_testing.html)
+- [ESP32 Webserver Tutorial](https://randomnerdtutorials.com/esp32-web-server-arduino-ide/)
+
+## Lizenz
+
+Dieses Projekt ist unter der MIT-Lizenz lizenziert. Siehe [LICENSE](LICENSE) Datei für Details.
+
+## Materialien
+
+### Nützliche Ressourcen
+- [ESP32 Offizielle Dokumentation](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/)
+- [Arduino Bibliotheken](https://www.arduino.cc/en/Reference/Libraries)
+- [NFC Tag Informationen](https://learn.adafruit.com/adafruit-pn532-rfid-nfc/overview)
+
+### Community und Support
+- [PlatformIO Community](https://community.platformio.org/)
+- [Arduino Forum](https://forum.arduino.cc/)
+- [ESP32 Forum](https://www.esp32.com/)
+
+## Verfügbarkeit
+
+Der Code kann getestet und die Anwendung kann vom [GitHub Repository](https://github.com/ManuelW77/Filaman) heruntergeladen werden.
+
+### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
--- a/README.md
+++ b/README.md
@ -1,9 +1,18 @@
 # FilaMan - Filament Management System

+[Deutsche Version](README.de.md)
+
 FilaMan is a filament management system for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management. 
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.

+![Scale](./img/scale_trans.png)
+
+
+More Images can be found in the [img Folder](/img/)  
+or my website:[FilaMan Website](https://www.filaman.app)  
+german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
+
 ### ESP32 Hardware Features
 - **Weight Measurement:** Using a load cell with HX711 amplifier for precise weight tracking.
 - **NFC Tag Reading/Writing:** PN532 module for reading and writing filament data to NFC tags.
@ -29,7 +38,7 @@ The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D
  - Track NFC tag assignments.

 ### If you want to support my work, i would be happy to get a coffe
-<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 60px !important;width: 217px !important;" ></a>
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>

 ## Detailed Functionality

@ -46,14 +55,15 @@ The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D

 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
-[https://amzn.eu/d/aXThslf](url)
+[Amazon Link](https://amzn.eu/d/aXThslf)
 - **HX711 Load Cell Amplifier:** For weight measurement.
-[https://amzn.eu/d/1wZ4v0x](url)
+[Amazon Link](https://amzn.eu/d/1wZ4v0x)
 - **OLED Display:** 128x64 SSD1306.
-[https://amzn.eu/d/dozAYDU](url)
+[Amazon Link](https://amzn.eu/d/dozAYDU)
 - **PN532 NFC Module:** For NFC tag operations.
-[https://amzn.eu/d/8205DDh](url)
- **NFC-Tag:** [https://amzn.eu/d/fywy4c4](url)
+[Amazon Link](https://amzn.eu/d/8205DDh)
+- **NFC-Tag:** NTAG215
+[Amazon Link](https://amzn.eu/d/fywy4c4)


 ### Pin Configuration
@ -147,4 +157,4 @@ This project is licensed under the MIT License. See the [LICENSE](LICENSE) file
 The code can be tested and the application can be downloaded from the [GitHub repository](https://github.com/ManuelW77/Filaman).

 ### If you want to support my work, i would be happy to get a coffe
-<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 60px !important;width: 217px !important;" ></a>
+<a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
--- a/display.cpp
+++ b/display.cpp
--- a/display.h
+++ b/display.h
--- a/html/header.html
+++ b/html/header.html
@ -6,14 +6,13 @@
    <title>FilaMan - Filament Management Tool</title>
    <link rel="icon" type="image/png" href="/favicon.ico">
    <link rel="stylesheet" href="style.css">
-    <link rel="stylesheet" href="style2.css">
 </head>
 <body>
    <div class="navbar">
        <div style="display: flex; align-items: center; gap: 2rem;">
            <img src="/logo.png" alt="FilaMan Logo" class="logo">
            <div class="logo-text">
-                <h1>FilaMan</h1>
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
                <h4>Filament Management Tool</h4>
            </div>
        </div>
@ -21,7 +20,7 @@
            <a href="/">Start</a>
            <a href="/waage">Scale</a>
            <a href="/spoolman">Spoolman/Bambu</a>
-            <a href="/">About</a>
+            <a href="/about">About</a>
        </nav>
        <div class="status-container">
            <div class="status-item">
@ -33,3 +32,4 @@
            <div class="ram-status" id="ramStatus"></div>
        </div>
    </div>
+
--- a/html/index.html
+++ b/html/index.html
@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+

    <div class="container">
        <h1>FilaMan</h1>
--- a/html/rfid.html
+++ b/html/rfid.html
@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
 <div class="connection-status hidden">
    <div class="spinner"></div>
    <span>Connection lost. Trying to reconnect...</span>
@ -35,11 +70,11 @@
                            </li>
                            <li>
                                <span class="stat-label">Weight:</span>
-                                <span class="stat-value"><span id="totalWeight"></span> kg</span>
+                                <span class="stat-value"><span id="totalWeight"></span></span>
                            </li>
                            <li>
                                <span class="stat-label">Length:</span>
-                                <span class="stat-value"><span id="totalLength"></span> m</span>
+                                <span class="stat-value"><span id="totalLength"></span></span>
                            </li>
                        </ul>
                    </div>
--- a/html/rfid.js
+++ b/html/rfid.js
@ -112,9 +112,39 @@ function initWebSocket() {
                
                if (bambuDot) {
                    bambuDot.className = 'status-dot ' + (data.bambu_connected ? 'online' : 'offline');
+                    // Add click handler only when offline
+                    if (!data.bambu_connected) {
+                        bambuDot.style.cursor = 'pointer';
+                        bambuDot.onclick = function() {
+                            if (socket && socket.readyState === WebSocket.OPEN) {
+                                socket.send(JSON.stringify({
+                                    type: 'reconnect',
+                                    payload: 'bambu'
+                                }));
+                            }
+                        };
+                    } else {
+                        bambuDot.style.cursor = 'default';
+                        bambuDot.onclick = null;
+                    }
                }
                if (spoolmanDot) {
                    spoolmanDot.className = 'status-dot ' + (data.spoolman_connected ? 'online' : 'offline');
+                    // Add click handler only when offline
+                    if (!data.spoolman_connected) {
+                        spoolmanDot.style.cursor = 'pointer';
+                        spoolmanDot.onclick = function() {
+                            if (socket && socket.readyState === WebSocket.OPEN) {
+                                socket.send(JSON.stringify({
+                                    type: 'reconnect',
+                                    payload: 'spoolman'
+                                }));
+                            }
+                        };
+                    } else {
+                        spoolmanDot.style.cursor = 'default';
+                        spoolmanDot.onclick = null;
+                    }
                }
                if (ramStatus) {
                    ramStatus.textContent = `${data.freeHeap}k`;
@ -209,16 +239,6 @@ function updateNfcInfo() {
        `${spool.id} | ${spool.filament.name} (${spool.filament.material})` === selectedText
    );

-    if (selectedSpool && selectedSpool.extra.nfc_id) {
-        nfcInfo.textContent = "NFC Tag assigned";
-        nfcInfo.classList.add("nfc-success");
-        nfcInfo.classList.remove("nfc-error");
-    } else {
-        nfcInfo.textContent = "No NFC-Tag assigned";
-        nfcInfo.classList.add("nfc-error");
-        nfcInfo.classList.remove("nfc-success");
-    }
-
    if (selectedSpool) {
        writeButton.classList.remove("hidden");
    } else {
@ -236,7 +256,7 @@ function displayAmsData(amsData) {
        
        const trayHTML = ams.tray.map(tray => {
            // Prüfe ob überhaupt Daten vorhanden sind
-            const relevantFields = ['tray_type', 'tray_sub_brands', 'tray_info_idx', 'setting_id'];
+            const relevantFields = ['tray_type', 'tray_sub_brands', 'tray_info_idx', 'setting_id', 'cali_idx'];
            const hasAnyContent = relevantFields.some(field => 
                tray[field] !== null && 
                tray[field] !== undefined && 
@ -244,23 +264,38 @@ function displayAmsData(amsData) {
                tray[field] !== 'null'
            );

-            if (!hasAnyContent) {
-                return `
-                    <div class="tray">
-                        <p class="tray-head">Tray ${tray.id}</p>
-                        <p>Empty</p>
-                    </div>
-                    <hr>`;
-            }
+            // Bestimme den Anzeigenamen für das Tray
+            const trayDisplayName = (ams.ams_id === 255) ? 'External' : `Tray ${tray.id}`;

            // Nur für nicht-leere Trays den Button-HTML erstellen
            const buttonHtml = `
                <button class="spool-button" onclick="handleSpoolIn(${ams.ams_id}, ${tray.id})" 
-                        style="position: absolute; top: -35px; left: -15px; 
+                        style="position: absolute; top: -30px; left: -15px; 
                               background: none; border: none; padding: 0; 
                               cursor: pointer; display: none;">
                    <img src="spool_in.png" alt="Spool In" style="width: 48px; height: 48px;">
                </button>`;
+            
+                        // Nur für nicht-leere Trays den Button-HTML erstellen
+            const outButtonHtml = `
+                <button class="spool-button" onclick="handleSpoolOut()" 
+                        style="position: absolute; top: -35px; right: -15px; 
+                               background: none; border: none; padding: 0; 
+                               cursor: pointer; display: block;">
+                    <img src="spool_in.png" alt="Spool In" style="width: 48px; height: 48px; transform: rotate(180deg) scaleX(-1);">
+                </button>`;
+
+            if (!hasAnyContent) {
+                return `
+                    <div class="tray">
+                        <p class="tray-head">${trayDisplayName}</p>
+                        <p>
+                            ${(ams.ams_id === 255 && tray.tray_type === '') ? buttonHtml : ''}
+                            Empty
+                        </p>
+                    </div>
+                    <hr>`;
+            }

            // Generiere den Type mit Color-Box zusammen
            const typeWithColor = tray.tray_type ? 
@ -277,8 +312,9 @@ function displayAmsData(amsData) {
            // Array mit restlichen Tray-Eigenschaften
            const trayProperties = [
                { key: 'tray_sub_brands', label: 'Sub Brands' },
-                { key: 'tray_info_idx', label: 'Filament Index' },
-                { key: 'setting_id', label: 'Setting ID' }
+                { key: 'tray_info_idx', label: 'Filament IDX' },
+                { key: 'setting_id', label: 'Setting ID' },
+                { key: 'cali_idx', label: 'Calibration IDX' }
            ];

            // Nur gültige Felder anzeigen
@ -289,7 +325,13 @@ function displayAmsData(amsData) {
                    tray[prop.key] !== '' &&
                    tray[prop.key] !== 'null'
                )
-                .map(prop => `<p>${prop.label}: ${tray[prop.key]}</p>`)
+                .map(prop => {
+                    // Spezielle Behandlung für setting_id
+                    if (prop.key === 'cali_idx' && tray[prop.key] === '-1') {
+                        return `<p>${prop.label}: not calibrated</p>`;
+                    }
+                    return `<p>${prop.label}: ${tray[prop.key]}</p>`;
+                })
                .join('');

            // Temperaturen nur anzeigen, wenn beide nicht 0 sind
@ -297,9 +339,6 @@ function displayAmsData(amsData) {
                ? `<p>Nozzle Temp: ${tray.nozzle_temp_min}°C - ${tray.nozzle_temp_max}°C</p>`
                : '';

-            // Bestimme den Anzeigenamen für das Tray
-            const trayDisplayName = (ams.ams_id === 255) ? 'External' : `Tray ${tray.id}`;
-
            return `
                <div class="tray" ${tray.tray_color ? `style="border-left: 4px solid #${tray.tray_color};"` : 'style="border-left: 4px solid #007bff;"'}>
                    <div style="position: relative;">
@ -308,7 +347,9 @@ function displayAmsData(amsData) {
                        ${typeWithColor}
                        ${trayDetails}
                        ${tempHTML}
+                        ${(ams.ams_id === 255 && tray.tray_type !== '') ? outButtonHtml : ''}
                    </div>
+                    
                </div>`;
        }).join('');

@ -332,6 +373,30 @@ function updateSpoolButtons(show) {
    });
 }

+function handleSpoolOut() {
+    // Erstelle Payload
+    const payload = {
+        type: 'setBambuSpool',
+        payload: {
+            amsId: 255,
+            trayId: 254,
+            color: "FFFFFF",
+            nozzle_temp_min: 0,
+            nozzle_temp_max: 0,
+            type: "",
+            brand: ""
+        }
+    };
+
+    try {
+        socket.send(JSON.stringify(payload));
+        showNotification(`External Spool removed. Pls wait`, true);
+    } catch (error) {
+        console.error("Fehler beim Senden der WebSocket Nachricht:", error);
+        showNotification("Error while sending!", false);
+    }
+}
+
 // Neue Funktion zum Behandeln des Spool-In-Klicks
 function handleSpoolIn(amsId, trayId) {
    // Prüfe WebSocket Verbindung zuerst
@ -361,7 +426,7 @@ function handleSpoolIn(amsId, trayId) {
    // Temperaturwerte extrahieren
    let minTemp = "175";
    let maxTemp = "275";
-    
+
    if (Array.isArray(selectedSpool.filament.nozzle_temperature) && 
        selectedSpool.filament.nozzle_temperature.length >= 2) {
        minTemp = selectedSpool.filament.nozzle_temperature[0];
@ -378,19 +443,30 @@ function handleSpoolIn(amsId, trayId) {
            nozzle_temp_min: parseInt(minTemp),
            nozzle_temp_max: parseInt(maxTemp),
            type: selectedSpool.filament.material,
-            brand: selectedSpool.filament.vendor.name
+            brand: selectedSpool.filament.vendor.name,
+            tray_info_idx: selectedSpool.filament.extra.bambu_idx.replace(/['"]+/g, '').trim(),
+            cali_idx: "-1"  // Default-Wert setzen
        }
    };

-    // Debug logging
-    console.log("Sende WebSocket Nachricht:", payload);
+    // Prüfe, ob der Key cali_idx vorhanden ist und setze ihn
+    if (selectedSpool.filament.extra.bambu_cali_id) {
+        payload.payload.cali_idx = selectedSpool.filament.extra.bambu_cali_id.replace(/['"]+/g, '').trim();
+    }
+
+    // Prüfe, ob der Key bambu_setting_id vorhanden ist
+    if (selectedSpool.filament.extra.bambu_setting_id) {
+        payload.payload.bambu_setting_id = selectedSpool.filament.extra.bambu_setting_id.replace(/['"]+/g, '').trim();
+    }
+
+    console.log("Spool-In Payload:", payload);

    try {
        socket.send(JSON.stringify(payload));
        showNotification(`Spool set in AMS ${amsId} Tray ${trayId}. Pls wait`, true);
    } catch (error) {
        console.error("Fehler beim Senden der WebSocket Nachricht:", error);
-        showNotification("Fehler beim Senden der Daten", false);
+        showNotification("Error while sending", false);
    }
 }

@ -440,7 +516,7 @@ function updateNfcData(data) {
            }

        } else {
-            nfcDataDiv.innerHTML = '<div style="margin-top: 10px;"></div>';
+            nfcDataDiv.innerHTML = '<div class="info-message-inner" style="margin-top: 10px;"></div>';
        }
        nfcStatusContainer.appendChild(nfcDataDiv);
        return;
@ -566,4 +642,4 @@ function showNotification(message, isSuccess) {
            notification.remove();
        }, 300);
    }, 3000);
-}
+}
--- a/html/spoolman.html
+++ b/html/spoolman.html
@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
    <script>
        window.onload = function() {
            if (spoolmanUrl && spoolmanUrl.trim() !== "") {
--- a/html/spoolman.js
+++ b/html/spoolman.js
@ -61,9 +61,6 @@ function populateVendorDropdown(data, selectedSmId = null) {
            totalLength += spool.remaining_length;
        }

-        console.log("Länge gesamt: " + spool.remaining_length);
-        console.log("Gewicht gesamt" + spool.remaining_weight);
-
        const vendor = spool.filament.vendor;
        
        const hasValidNfcId = spool.extra && 
@ -88,6 +85,18 @@ function populateVendorDropdown(data, selectedSmId = null) {
        }
    });

+    // Nach der Schleife: Formatierung der Gesamtlänge
+    console.log("Total Lenght: ", totalLength);
+    const formattedLength = totalLength > 1000 
+        ? (totalLength / 1000).toFixed(2) + " km" 
+        : totalLength.toFixed(2) + " m";
+
+    // Formatierung des Gesamtgewichts (von g zu kg zu t)
+    const weightInKg = totalWeight / 1000;  // erst in kg umrechnen
+    const formattedWeight = weightInKg > 1000 
+        ? (weightInKg / 1000).toFixed(2) + " t" 
+        : weightInKg.toFixed(2) + " kg";
+
    // Dropdown mit gefilterten Herstellern befüllen
    Object.entries(filteredVendors).forEach(([id, name]) => {
        const option = document.createElement("option");
@ -102,8 +111,8 @@ function populateVendorDropdown(data, selectedSmId = null) {
    document.getElementById("totalVendors").textContent = Object.keys(allVendors).length;
    
    // Neue Statistiken hinzufügen
-    document.getElementById("totalWeight").textContent = (totalWeight / 1000).toFixed(2);
-    document.getElementById("totalLength").textContent = (totalLength / 1000).toFixed(2);
+    document.getElementById("totalWeight").textContent = formattedWeight;
+    document.getElementById("totalLength").textContent = formattedLength;

    // Material-Statistiken zum DOM hinzufügen
    const materialsList = document.getElementById("materialsList");
@ -112,7 +121,7 @@ function populateVendorDropdown(data, selectedSmId = null) {
        .sort(([,a], [,b]) => b - a) // Sortiere nach Anzahl absteigend
        .forEach(([material, count]) => {
            const li = document.createElement("li");
-            li.textContent = `${material}: ${count} ${count === 1 ? 'Spule' : 'Spulen'}`;
+            li.textContent = `${material}: ${count} ${count === 1 ? 'Spool' : 'Spools'}`;
            materialsList.appendChild(li);
        });

--- a/html/style.css
+++ b/html/style.css
@ -133,6 +133,15 @@ body {
    background-color: #dc2626;
 }

+.status-dot.offline {
+    cursor: pointer;
+}
+
+.status-dot.offline:hover {
+    opacity: 0.8;
+    transform: scale(1.1);
+}
+
 .ram-status { 
    color: var(--inner-text-color);
    font-size: 0.9em;
@ -471,11 +480,15 @@ a:hover {

 .info-message {
    padding: 10px;
-    background-color: #fff3f3;
+    background-color: var(--header-bg);
    border-radius: 4px;
    border-left: 4px solid #39d82e;
 }

+.info-message-inner {
+    background-color: var(--header-bg) !important;
+}
+
 .nfc-header {
    display: grid;
    grid-template-columns: 40px 1fr 40px;
@ -489,3 +502,515 @@ a:hover {
    text-align: center;
    color: var(--accent-color);
 }
+
+.nfc-header .status-circle {
+    grid-column: 3;
+    justify-self: end;
+}
+
+.content-header {
+    display: flex;
+    justify-content: center;
+    align-items: center;
+    position: relative;
+}
+
+.connection-status {
+    display: flex;
+    align-items: center;
+    gap: 10px;
+    background-color: #fff3f3;
+    border: 1px solid #dc3545;
+    border-radius: 4px;
+    padding: 10px 15px;
+    margin: 15px auto;
+    color: #dc3545;
+    position: fixed;
+    top: 20px;
+    left: 50%;
+    transform: translateX(-50%);
+    z-index: 1000;
+    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
+    max-width: 90%;
+    opacity: 0;
+    transition: opacity 0.3s ease;
+}
+
+.connection-status.visible {
+    opacity: 1;
+}
+
+.spinner {
+    flex-shrink: 0;
+    width: 16px;
+    height: 16px;
+    border: 2px solid rgba(220, 53, 69, 0.2);
+    border-top-color: #dc3545;
+    border-radius: 50%;
+}
+
+.connection-status.visible .spinner {
+    animation: spin 0.8s linear infinite;
+}
+
+@keyframes spin {
+    to { transform: rotate(360deg); }
+}
+
+.connection-status.hidden {
+    display: none;
+}
+
+.nfc-actions {
+    display: flex;
+    gap: 10px;
+    justify-content: center; /* Zentriert das div */
+}
+
+.btn {
+    padding: 8px 16px;
+    border-radius: 4px;
+    border: none;
+    cursor: pointer;
+    font-weight: bold;
+}
+
+.btn-primary {
+    background-color: #007bff;
+    color: white;
+}
+
+.btn-primary:hover {
+    background-color: #0056b3;
+}
+
+.btn-danger {
+    background-color: #dc3545;
+    color: white;
+}
+
+.btn-danger:hover {
+    background-color: #c82333;
+}
+
+/* Filament Select Styling */
+#filamentSelect {
+    width: 100%;
+    padding: 12px 15px;
+    font-size: 16px;
+    border: 2px solid #e0e0e0;
+    border-radius: 8px;
+    background-color: #fff;
+    cursor: pointer;
+    appearance: none;
+    -webkit-appearance: none;
+    -moz-appearance: none;
+    background-image: url("data:image/svg+xml;charset=UTF-8,%3csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 24 24' fill='none' stroke='%23007bff' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3e%3cpolyline points='6 9 12 15 18 9'%3e%3c/polyline%3e%3c/svg%3e");
+    background-repeat: no-repeat;
+    background-position: right 15px center;
+    background-size: 15px;
+    transition: all 0.3s ease;
+    box-shadow: 0 2px 4px rgba(0, 0, 0, 0.05);
+}
+
+#filamentSelect:hover {
+    border-color: #007bff;
+    box-shadow: 0 3px 6px rgba(0, 123, 255, 0.1);
+}
+
+#filamentSelect:focus {
+    border-color: #007bff;
+    outline: none;
+    box-shadow: 0 0 0 3px rgba(0, 123, 255, 0.25);
+}
+
+#filamentSelect option {
+    padding: 8px 15px;
+    font-size: 16px;
+    background-color: #fff;
+    color: #000; /* Standard Textfarbe für alles außer dem Farbblock */
+}
+
+#filamentSelect option::first-letter {
+    font-size: 16px;
+    margin-right: 5px;
+}
+
+#filamentSelect option::before {
+    content: '';
+    display: inline-block;
+    width: 12px;
+    margin-right: 8px;
+}
+
+/* Color Box im Select */
+.color-box {
+    display: inline-block;
+    width: 12px;
+    height: 12px;
+    border: 1px solid #333;
+    border-radius: 2px;
+    margin-right: 5px;
+    vertical-align: middle;
+}
+
+#filamentSelect option span {
+    display: inline-block;
+    pointer-events: none;
+}
+
+#filamentSelect option span:first-child {
+    margin-right: 5px;
+    font-size: 16px;
+}
+
+/* Filament Select Option Styling */
+#filamentSelect option span.color-circle {
+    display: inline-block;
+    width: 12px;
+    height: 12px;
+    border-radius: 50%;
+    margin-right: 8px;
+    border: 1px solid #333;
+    vertical-align: middle;
+}
+
+/* Custom Dropdown */
+.custom-dropdown {
+    position: relative;
+    width: 100%;
+    font-family: inherit;
+    cursor: default; /* Container selbst soll normalen Cursor haben */
+    color: black;
+}
+
+.dropdown-button {
+    padding: 12px 15px;
+    border: 2px solid #e0e0e0;
+    border-radius: 8px;
+    background-color: #fff;
+    cursor: pointer;
+    display: flex;
+    align-items: center;
+    gap: 8px;
+    transition: all 0.3s ease;
+}
+
+.dropdown-button:hover {
+    border-color: #007bff;
+}
+
+.selected-color {
+    width: 16px;
+    height: 16px;
+    border-radius: 50%;
+    border: 1px solid #333;
+    flex-shrink: 0;
+}
+
+.dropdown-arrow {
+    margin-left: auto;
+    color: #007bff;
+    font-size: 12px;
+}
+
+.dropdown-content {
+    display: none;
+    position: absolute;
+    top: 100%;
+    left: 0;
+    right: 0;
+    background-color: #fff;
+    border: 1px solid #e0e0e0;
+    border-radius: 8px;
+    margin-top: 4px;
+    max-height: 300px;
+    overflow-y: auto;
+    z-index: 1000;
+    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
+}
+
+.dropdown-content.show {
+    display: block;
+}
+
+.dropdown-option {
+    padding: 10px 15px;
+    cursor: pointer;
+    display: flex;
+    align-items: center;
+    gap: 8px;
+}
+
+.dropdown-option:hover {
+    background-color: #f8f9fa;
+}
+
+.option-color {
+    width: 16px;
+    height: 16px;
+    border-radius: 50%;
+    border: 1px solid #333;
+    flex-shrink: 0;
+}
+
+.notification {
+    position: fixed;
+    top: 20px;
+    right: 20px;
+    padding: 15px 25px;
+    border-radius: 4px;
+    color: white;
+    z-index: 1000;
+    animation: slideIn 0.3s ease-out;
+}
+
+.notification.success {
+    background-color: #28a745;
+}
+
+.notification.error {
+    background-color: #dc3545;
+}
+
+.notification.fade-out {
+    opacity: 0;
+    transition: opacity 0.3s ease-out;
+}
+
+@keyframes slideIn {
+    from {
+        transform: translateX(100%);
+        opacity: 0;
+    }
+    to {
+        transform: translateX(0);
+        opacity: 1;
+    }
+}
+
+/* Neue Styles für die Statistiken */
+.statistics-grid {
+    display: grid;
+    grid-template-columns: repeat(auto-fit, minmax(150px, 1fr));
+    gap: 1rem;
+    margin-top: 15px;
+}
+
+.statistics-column {
+    background: var(--inner-box-bg);
+    border: 1px solid rgba(99, 187, 103, 0.2);
+    border-radius: 0.5rem;
+}
+
+.statistics-column h3 {
+    color: var(--inner-text-color);
+    border-bottom: 1px solid rgba(99, 187, 103, 0.2);
+    font-size: 1.1rem;
+}
+
+.statistics-list {
+    list-style: none;
+    padding: 0;
+    margin: 0;
+}
+
+.statistics-list li {
+    display: flex;
+    justify-content: space-between;
+    padding: 0.5rem;
+    border-bottom: 1px solid rgba(99, 187, 103, 0.1);
+}
+
+.statistics-list li:last-child {
+    border-bottom: none;
+}
+
+.stat-label {
+    color: var(--inner-text-color);
+}
+
+.stat-value {
+    color: var(--stat-value-color);
+    font-weight: 500;
+}
+
+/* Responsive Design Anpassung */
+@media (max-width: 768px) {
+    .statistics-grid {
+        grid-template-columns: 1fr;
+    }
+}
+
+.statistics-header {
+    display: flex;
+    justify-content: space-between;
+    align-items: center;
+    margin-bottom: 15px;
+    padding-bottom: 0;
+    border-bottom: 1px solid #e9ecef;
+}
+
+.refresh-button {
+    display: flex;
+    align-items: center;
+    padding: 8px 16px;
+    background-color: #007bff;
+    color: white;
+    border: none;
+    border-radius: 4px;
+    cursor: pointer;
+    font-size: 14px;
+    transition: background-color 0.2s;
+}
+
+.refresh-button:hover {
+    background-color: #0056b3;
+}
+
+.refresh-button:active {
+    background-color: #004494;
+}
+
+.spools-info {
+    display: flex;
+    justify-content: flex-start;
+    gap: 20px;
+    margin-bottom: 15px;
+}
+
+.spool-stat {
+    display: flex;
+    align-items: center;
+    gap: 8px;
+    background: var(--inner-box-bg);
+    border: 1px solid rgba(99, 187, 103, 0.2);
+    border-radius: 0.5rem;
+}
+
+.spool-stat .stat-label {
+    color: var(--inner-text-color);
+}
+
+.spool-stat .stat-value {
+    color: var(--stat-value-color);
+    font-weight: 500;
+}
+
+/* Buttons und klickbare Elemente */
+button, 
+input[type="submit"],
+.dropdown-button,
+.dropdown-option,
+.refresh-button,
+.btn,
+.styled-select,
+select,
+a {
+    cursor: pointer !important;
+}
+
+/* Disabled Zustände */
+button:disabled,
+input[type="submit"]:disabled,
+.btn:disabled,
+.styled-select:disabled {
+    cursor: not-allowed !important;
+    opacity: 0.7;
+}
+
+/* Schreib-Button */
+#writeNfcButton {
+    background-color: #007bff;
+    color: white;
+    transition: background-color 0.3s, color 0.3s;
+    width: 160px;
+}
+
+#writeNfcButton.writing {
+    background-color: #ffc107;
+    color: black;
+    width: 160px;
+}
+
+#writeNfcButton.success {
+    background-color: #28a745;
+    color: white;
+    width: 160px;
+}
+
+#writeNfcButton.error {
+    background-color: #dc3545;
+    color: white;
+    width: 160px;
+}
+
+@keyframes dots {
+    0% { content: ""; }
+    33% { content: "."; }
+    66% { content: ".."; }
+    100% { content: "..."; }
+}
+
+#writeNfcButton.writing::after {
+    content: "...";
+    animation: dots 1s steps(3, end) infinite;
+}
+
+/* Bambu Settings Erweiterung */
+.bambu-settings {
+    background: white;
+    padding: 20px;
+    border-radius: 8px;
+    box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
+    max-width: 400px;
+    margin: 20px auto;
+}
+
+.bambu-settings .input-group {
+    margin-bottom: 15px;
+    text-align: left;
+}
+
+.bambu-settings .input-group label {
+    display: block;
+    margin-bottom: 5px;
+}
+
+.bambu-settings .input-group input {
+    width: 95%;
+}
+
+#bambuStatusMessage {
+    margin-top: 15px;
+    display: flex;
+    align-items: center;
+    gap: 10px;
+    justify-content: center;
+}
+
+.amsData {
+    border-color: black !important;
+    border-width: 1px !important;
+}
+
+.tray {
+    position: relative;
+}
+
+.tray-head {
+    color: var(--stat-value-color) !important;
+    text-align: center !important;
+    font-weight: bold !important;
+}
+
+.spool-button:hover {
+    opacity: 0.8;
+}
+
+.version {
+    font-size: 0.4em;
+    color: #000;
+    vertical-align: middle;
+    margin-left: 0.5rem;
+}
--- a/html/style2.css
+++ b/html/style2.css
@ -1,505 +0,0 @@
-
-.nfc-header .status-circle {
-    grid-column: 3;
-    justify-self: end;
-}
-
-.content-header {
-    display: flex;
-    justify-content: center;
-    align-items: center;
-    position: relative;
-}
-
-.connection-status {
-    display: flex;
-    align-items: center;
-    gap: 10px;
-    background-color: #fff3f3;
-    border: 1px solid #dc3545;
-    border-radius: 4px;
-    padding: 10px 15px;
-    margin: 15px auto;
-    color: #dc3545;
-    position: fixed;
-    top: 20px;
-    left: 50%;
-    transform: translateX(-50%);
-    z-index: 1000;
-    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
-    max-width: 90%;
-    opacity: 0;
-    transition: opacity 0.3s ease;
-}
-
-.connection-status.visible {
-    opacity: 1;
-}
-
-.spinner {
-    flex-shrink: 0;
-    width: 16px;
-    height: 16px;
-    border: 2px solid rgba(220, 53, 69, 0.2);
-    border-top-color: #dc3545;
-    border-radius: 50%;
-}
-
-.connection-status.visible .spinner {
-    animation: spin 0.8s linear infinite;
-}
-
-@keyframes spin {
-    to { transform: rotate(360deg); }
-}
-
-.connection-status.hidden {
-    display: none;
-}
-
-.nfc-actions {
-    display: flex;
-    gap: 10px;
-    justify-content: center; /* Zentriert das div */
-}
-
-.btn {
-    padding: 8px 16px;
-    border-radius: 4px;
-    border: none;
-    cursor: pointer;
-    font-weight: bold;
-}
-
-.btn-primary {
-    background-color: #007bff;
-    color: white;
-}
-
-.btn-primary:hover {
-    background-color: #0056b3;
-}
-
-.btn-danger {
-    background-color: #dc3545;
-    color: white;
-}
-
-.btn-danger:hover {
-    background-color: #c82333;
-}
-
-/* Filament Select Styling */
-#filamentSelect {
-    width: 100%;
-    padding: 12px 15px;
-    font-size: 16px;
-    border: 2px solid #e0e0e0;
-    border-radius: 8px;
-    background-color: #fff;
-    cursor: pointer;
-    appearance: none;
-    -webkit-appearance: none;
-    -moz-appearance: none;
-    background-image: url("data:image/svg+xml;charset=UTF-8,%3csvg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 24 24' fill='none' stroke='%23007bff' stroke-width='2' stroke-linecap='round' stroke-linejoin='round'%3e%3cpolyline points='6 9 12 15 18 9'%3e%3c/polyline%3e%3c/svg%3e");
-    background-repeat: no-repeat;
-    background-position: right 15px center;
-    background-size: 15px;
-    transition: all 0.3s ease;
-    box-shadow: 0 2px 4px rgba(0, 0, 0, 0.05);
-}
-
-#filamentSelect:hover {
-    border-color: #007bff;
-    box-shadow: 0 3px 6px rgba(0, 123, 255, 0.1);
-}
-
-#filamentSelect:focus {
-    border-color: #007bff;
-    outline: none;
-    box-shadow: 0 0 0 3px rgba(0, 123, 255, 0.25);
-}
-
-#filamentSelect option {
-    padding: 8px 15px;
-    font-size: 16px;
-    background-color: #fff;
-    color: #000; /* Standard Textfarbe für alles außer dem Farbblock */
-}
-
-#filamentSelect option::first-letter {
-    font-size: 16px;
-    margin-right: 5px;
-}
-
-#filamentSelect option::before {
-    content: '';
-    display: inline-block;
-    width: 12px;
-    margin-right: 8px;
-}
-
-/* Color Box im Select */
-.color-box {
-    display: inline-block;
-    width: 12px;
-    height: 12px;
-    border: 1px solid #333;
-    border-radius: 2px;
-    margin-right: 5px;
-    vertical-align: middle;
-}
-
-#filamentSelect option span {
-    display: inline-block;
-    pointer-events: none;
-}
-
-#filamentSelect option span:first-child {
-    margin-right: 5px;
-    font-size: 16px;
-}
-
-/* Filament Select Option Styling */
-#filamentSelect option span.color-circle {
-    display: inline-block;
-    width: 12px;
-    height: 12px;
-    border-radius: 50%;
-    margin-right: 8px;
-    border: 1px solid #333;
-    vertical-align: middle;
-}
-
-/* Custom Dropdown */
-.custom-dropdown {
-    position: relative;
-    width: 100%;
-    font-family: inherit;
-    cursor: default; /* Container selbst soll normalen Cursor haben */
-    color: black;
-}
-
-.dropdown-button {
-    padding: 12px 15px;
-    border: 2px solid #e0e0e0;
-    border-radius: 8px;
-    background-color: #fff;
-    cursor: pointer;
-    display: flex;
-    align-items: center;
-    gap: 8px;
-    transition: all 0.3s ease;
-}
-
-.dropdown-button:hover {
-    border-color: #007bff;
-}
-
-.selected-color {
-    width: 16px;
-    height: 16px;
-    border-radius: 50%;
-    border: 1px solid #333;
-    flex-shrink: 0;
-}
-
-.dropdown-arrow {
-    margin-left: auto;
-    color: #007bff;
-    font-size: 12px;
-}
-
-.dropdown-content {
-    display: none;
-    position: absolute;
-    top: 100%;
-    left: 0;
-    right: 0;
-    background-color: #fff;
-    border: 1px solid #e0e0e0;
-    border-radius: 8px;
-    margin-top: 4px;
-    max-height: 300px;
-    overflow-y: auto;
-    z-index: 1000;
-    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
-}
-
-.dropdown-content.show {
-    display: block;
-}
-
-.dropdown-option {
-    padding: 10px 15px;
-    cursor: pointer;
-    display: flex;
-    align-items: center;
-    gap: 8px;
-}
-
-.dropdown-option:hover {
-    background-color: #f8f9fa;
-}
-
-.option-color {
-    width: 16px;
-    height: 16px;
-    border-radius: 50%;
-    border: 1px solid #333;
-    flex-shrink: 0;
-}
-
-.notification {
-    position: fixed;
-    top: 20px;
-    right: 20px;
-    padding: 15px 25px;
-    border-radius: 4px;
-    color: white;
-    z-index: 1000;
-    animation: slideIn 0.3s ease-out;
-}
-
-.notification.success {
-    background-color: #28a745;
-}
-
-.notification.error {
-    background-color: #dc3545;
-}
-
-.notification.fade-out {
-    opacity: 0;
-    transition: opacity 0.3s ease-out;
-}
-
-@keyframes slideIn {
-    from {
-        transform: translateX(100%);
-        opacity: 0;
-    }
-    to {
-        transform: translateX(0);
-        opacity: 1;
-    }
-}
-
-/* Neue Styles für die Statistiken */
-.statistics-grid {
-    display: grid;
-    grid-template-columns: repeat(auto-fit, minmax(150px, 1fr));
-    gap: 1rem;
-    margin-top: 15px;
-}
-
-.statistics-column {
-    background: var(--inner-box-bg);
-    border: 1px solid rgba(99, 187, 103, 0.2);
-    border-radius: 0.5rem;
-}
-
-.statistics-column h3 {
-    color: var(--inner-text-color);
-    border-bottom: 1px solid rgba(99, 187, 103, 0.2);
-    font-size: 1.1rem;
-}
-
-.statistics-list {
-    list-style: none;
-    padding: 0;
-    margin: 0;
-}
-
-.statistics-list li {
-    display: flex;
-    justify-content: space-between;
-    padding: 0.5rem;
-    border-bottom: 1px solid rgba(99, 187, 103, 0.1);
-}
-
-.statistics-list li:last-child {
-    border-bottom: none;
-}
-
-.stat-label {
-    color: var(--inner-text-color);
-}
-
-.stat-value {
-    color: var(--stat-value-color);
-    font-weight: 500;
-}
-
-/* Responsive Design Anpassung */
-@media (max-width: 768px) {
-    .statistics-grid {
-        grid-template-columns: 1fr;
-    }
-}
-
-.statistics-header {
-    display: flex;
-    justify-content: space-between;
-    align-items: center;
-    margin-bottom: 15px;
-    padding-bottom: 0;
-    border-bottom: 1px solid #e9ecef;
-}
-
-.refresh-button {
-    display: flex;
-    align-items: center;
-    padding: 8px 16px;
-    background-color: #007bff;
-    color: white;
-    border: none;
-    border-radius: 4px;
-    cursor: pointer;
-    font-size: 14px;
-    transition: background-color 0.2s;
-}
-
-.refresh-button:hover {
-    background-color: #0056b3;
-}
-
-.refresh-button:active {
-    background-color: #004494;
-}
-
-.spools-info {
-    display: flex;
-    justify-content: flex-start;
-    gap: 20px;
-    margin-bottom: 15px;
-}
-
-.spool-stat {
-    display: flex;
-    align-items: center;
-    gap: 8px;
-    background: var(--inner-box-bg);
-    border: 1px solid rgba(99, 187, 103, 0.2);
-    border-radius: 0.5rem;
-}
-
-.spool-stat .stat-label {
-    color: var(--inner-text-color);
-}
-
-.spool-stat .stat-value {
-    color: var(--stat-value-color);
-    font-weight: 500;
-}
-
-/* Buttons und klickbare Elemente */
-button, 
-input[type="submit"],
-.dropdown-button,
-.dropdown-option,
-.refresh-button,
-.btn,
-.styled-select,
-select,
-a {
-    cursor: pointer !important;
-}
-
-/* Disabled Zustände */
-button:disabled,
-input[type="submit"]:disabled,
-.btn:disabled,
-.styled-select:disabled {
-    cursor: not-allowed !important;
-    opacity: 0.7;
-}
-
-/* Schreib-Button */
-#writeNfcButton {
-    background-color: #007bff;
-    color: white;
-    transition: background-color 0.3s, color 0.3s;
-    width: 160px;
-}
-
-#writeNfcButton.writing {
-    background-color: #ffc107;
-    color: black;
-    width: 160px;
-}
-
-#writeNfcButton.success {
-    background-color: #28a745;
-    color: white;
-    width: 160px;
-}
-
-#writeNfcButton.error {
-    background-color: #dc3545;
-    color: white;
-    width: 160px;
-}
-
-@keyframes dots {
-    0% { content: ""; }
-    33% { content: "."; }
-    66% { content: ".."; }
-    100% { content: "..."; }
-}
-
-#writeNfcButton.writing::after {
-    content: "...";
-    animation: dots 1s steps(3, end) infinite;
-}
-
-/* Bambu Settings Erweiterung */
-.bambu-settings {
-    background: white;
-    padding: 20px;
-    border-radius: 8px;
-    box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
-    max-width: 400px;
-    margin: 20px auto;
-}
-
-.bambu-settings .input-group {
-    margin-bottom: 15px;
-    text-align: left;
-}
-
-.bambu-settings .input-group label {
-    display: block;
-    margin-bottom: 5px;
-}
-
-.bambu-settings .input-group input {
-    width: 95%;
-}
-
-#bambuStatusMessage {
-    margin-top: 15px;
-    display: flex;
-    align-items: center;
-    gap: 10px;
-    justify-content: center;
-}
-
-.amsData {
-    border-color: black !important;
-    border-width: 1px !important;
-}
-
-.tray {
-    position: relative;
-}
-
-.tray-head {
-    color: var(--stat-value-color) !important;
-    text-align: center !important;
-    font-weight: bold !important;
-}
-
-.spool-button:hover {
-    opacity: 0.8;
-}
--- a/html/waage.html
+++ b/html/waage.html
@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
    <div class="content">
        <h1>Scale Configuration Page</h1>
        
--- a/html/wifi.html
+++ b/html/wifi.html
@ -1,4 +1,39 @@
-{{header}}
+<!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version">v1.0.2</span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+
    <div class="content">
        <h1>WiFi Configuration Page</h1>
        <form action="/setToken" method="post">
--- a/img/display_1.png
+++ b/img/display_1.png
--- a/img/display_2.png
+++ b/img/display_2.png
--- a/img/display_3.png
+++ b/img/display_3.png
--- a/img/display_4.png
+++ b/img/display_4.png
--- a/img/doc-esp32-pinout-reference-wroom-devkit.png
+++ b/img/doc-esp32-pinout-reference-wroom-devkit.png
--- a/img/scale_1.png
+++ b/img/scale_1.png
--- a/img/scale_2.png
+++ b/img/scale_2.png
--- a/img/scale_3.png
+++ b/img/scale_3.png
--- a/img/scale_4.png
+++ b/img/scale_4.png
--- a/img/scale_side.png
+++ b/img/scale_side.png
--- a/img/scale_trans.png
+++ b/img/scale_trans.png
--- a/img/web_1.jpeg
+++ b/img/web_1.jpeg
--- a/img/web_ams.png
+++ b/img/web_ams.png
--- a/img/web_nfc.png
+++ b/img/web_nfc.png
--- a/img/web_spoolm_to_ams.png
+++ b/img/web_spoolm_to_ams.png
--- a/img/web_spoolman.png
+++ b/img/web_spoolman.png
--- a/img/web_statistics.png
+++ b/img/web_statistics.png
--- a/partitions.csv
+++ b/partitions.csv
@ -0,0 +1,5 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x280000,
+spiffs,   data, spiffs,  0x290000,0x170000,
--- a/platformio.ini
+++ b/platformio.ini
@ -0,0 +1,52 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[common]
+version = "1.0.6"
+
+[env:esp32dev]
+platform = espressif32
+board = esp32dev
+framework = arduino
+monitor_speed = 115200
+
+lib_deps =
+    tzapu/WiFiManager @ ^2.0.17
+    me-no-dev/ESP Async WebServer @ ^1.2.4
+    me-no-dev/AsyncTCP @ ^1.1.1
+    bogde/HX711 @ ^0.7.5
+    adafruit/Adafruit SSD1306 @ ^2.5.13
+    adafruit/Adafruit GFX Library @ ^1.11.11
+    adafruit/Adafruit PN532 @ ^1.3.3
+    bblanchon/ArduinoJson @ ^7.3.0
+    knolleary/PubSubClient @ ^2.8
+    digitaldragon/SSLClient @ ^1.3.2
+    
+; Enable SPIFFS upload
+board_build.filesystem = spiffs
+board_build.spiffs.partition = 2M
+board_build.spiffs.upload_size = 2M
+board_build.partitions = partitions.csv
+
+build_flags = 
+    -Os
+    -ffunction-sections
+    -fdata-sections
+    -DNDEBUG
+    -mtext-section-literals
+    '-D VERSION="${common.version}"'
+
+extra_scripts = 
+    pre:scripts/combine_html.py
+    pre:scripts/pre_build.py
+    pre:scripts/pre_spiffs.py
+    pre:scripts/gzip_files.py
+    pre:scripts/extra_script.py
+    pre:scripts/update_changelog.py
--- a/scripts/combine_html.py
+++ b/scripts/combine_html.py
@ -0,0 +1,31 @@
+Import("env")
+import os
+
+def combine_html_files(source, target, env):
+    html_dir = "./html"
+    header_file = os.path.join(html_dir, "header.html")
+    
+    # Read header content
+    with open(header_file, 'r') as f:
+        header_content = f.read()
+    
+    # Process all HTML files except header.html
+    for filename in os.listdir(html_dir):
+        if filename.endswith('.html') and filename != 'header.html':
+            file_path = os.path.join(html_dir, filename)
+            
+            # Read content
+            with open(file_path, 'r') as f:
+                content = f.read()
+            
+            # Replace placeholder with header content
+            if '{{header}}' in content:
+                new_content = content.replace('{{header}}', header_content)
+                
+                # Write back combined content
+                with open(file_path, 'w') as f:
+                    f.write(new_content)
+                print(f"Combined header with {filename}")
+
+# Register the script to run before building SPIFFS
+env.AddPreAction("buildfs", combine_html_files)
--- a/scripts/extra_script.py
+++ b/scripts/extra_script.py
--- a/scripts/gzip_files.py
+++ b/scripts/gzip_files.py
@ -14,7 +14,7 @@ def copy_file(input_file, output_file):

 def should_compress(file):
    # Komprimiere nur bestimmte Dateitypen
-    return file.endswith(('.js', '.png', '.css'))
+    return file.endswith(('.js', '.png', '.css', '.html'))

 def main(source_dir, target_dir):
    for root, dirs, files in os.walk(source_dir):
--- a/scripts/pre_build.py
+++ b/scripts/pre_build.py
@ -0,0 +1,25 @@
+Import("env")
+import os
+
+def replace_version(source, target, env):
+    # Get version from common section
+    version = env.GetProjectConfig().get("common", "version").strip('"')
+    header_file = "./html/header.html"
+    
+    with open(header_file, 'r') as file:
+        content = file.read()
+    
+    # Replace version in header.html using string manipulation instead of regex
+    search = '<h1>FilaMan<span class="version">v'
+    end = '</span>'
+    start_pos = content.find(search)
+    if start_pos != -1:
+        start_pos += len(search)
+        end_pos = content.find(end, start_pos)
+        if end_pos != -1:
+            content = content[:start_pos] + version + content[end_pos:]
+    
+    with open(header_file, 'w') as file:
+        file.write(content)
+
+env.AddPreAction("buildfs", replace_version)
--- a/scripts/pre_spiffs.py
+++ b/scripts/pre_spiffs.py
@ -0,0 +1,7 @@
+Import("env")
+
+# Wiederverwendung der replace_version Funktion
+exec(open("./scripts/pre_build.py").read())
+
+# Bind to SPIFFS build
+env.AddPreAction("buildfs", replace_version)
--- a/scripts/update_changelog.py
+++ b/scripts/update_changelog.py
@ -0,0 +1,132 @@
+import os
+import re
+import subprocess
+from datetime import datetime
+
+def get_version():
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    project_dir = os.path.dirname(script_dir)
+    platformio_path = os.path.join(project_dir, 'platformio.ini')
+    
+    with open(platformio_path, 'r') as f:
+        content = f.read()
+        version_match = re.search(r'version\s*=\s*"([^"]+)"', content)
+        return version_match.group(1) if version_match else None
+
+def get_last_tag():
+    try:
+        result = subprocess.run(['git', 'describe', '--tags', '--abbrev=0'], 
+                              capture_output=True, text=True)
+        return result.stdout.strip()
+    except subprocess.CalledProcessError:
+        return None
+
+def categorize_commit(commit_msg):
+    """Categorize commit messages based on conventional commits"""
+    lower_msg = commit_msg.lower()
+    if any(x in lower_msg for x in ['feat', 'add', 'new']):
+        return 'Added'
+    elif any(x in lower_msg for x in ['fix', 'bug']):
+        return 'Fixed'
+    else:
+        return 'Changed'
+
+def get_changes_from_git():
+    """Get changes from git commits since last tag"""
+    changes = {
+        'Added': [],
+        'Changed': [],
+        'Fixed': []
+    }
+    
+    last_tag = get_last_tag()
+    
+    # Get commits since last tag
+    git_log_command = ['git', 'log', '--pretty=format:%s']
+    if last_tag:
+        git_log_command.append(f'{last_tag}..HEAD')
+    
+    try:
+        result = subprocess.run(git_log_command, capture_output=True, text=True)
+        commits = result.stdout.strip().split('\n')
+        
+        # Filter out empty commits and categorize
+        for commit in commits:
+            if commit:
+                category = categorize_commit(commit)
+                # Clean up commit message
+                clean_msg = re.sub(r'^(feat|fix|chore|docs|style|refactor|perf|test)(\(.*\))?:', '', commit).strip()
+                changes[category].append(clean_msg)
+                
+    except subprocess.CalledProcessError:
+        print("Error: Failed to get git commits")
+        return None
+    
+    return changes
+
+def push_changes(version):
+    """Push changes to upstream"""
+    try:
+        # Stage the CHANGELOG.md
+        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
+        
+        # Commit the changelog
+        commit_msg = f"docs: update changelog for version {version}"
+        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
+        
+        # Push to origin (local)
+        subprocess.run(['git', 'push', 'origin'], check=True)
+        print("Successfully pushed to origin")
+        
+        # Ask for upstream push
+        response = input("Do you want to push to GitHub (upstream)? (y/n): ").lower()
+        if response == 'y':
+            subprocess.run(['git', 'push', 'upstream'], check=True)
+            print("Successfully pushed to upstream")
+            
+    except subprocess.CalledProcessError as e:
+        print(f"Error during git operations: {e}")
+        return False
+    return True
+
+def update_changelog():
+    version = get_version()
+    today = datetime.now().strftime('%Y-%m-%d')
+    
+    script_dir = os.path.dirname(os.path.abspath(__file__))
+    project_dir = os.path.dirname(script_dir)
+    changelog_path = os.path.join(project_dir, 'CHANGELOG.md')
+    
+    # Get changes from git
+    changes = get_changes_from_git()
+    if not changes:
+        print("No changes found or error occurred")
+        return
+    
+    # Create changelog entry
+    changelog_entry = f"## [{version}] - {today}\n"
+    for section, entries in changes.items():
+        if entries:  # Only add sections that have entries
+            changelog_entry += f"### {section}\n"
+            for entry in entries:
+                changelog_entry += f"- {entry}\n"
+            changelog_entry += "\n"
+    
+    if not os.path.exists(changelog_path):
+        with open(changelog_path, 'w') as f:
+            f.write(f"# Changelog\n\n{changelog_entry}")
+        push_changes(version)
+    else:
+        with open(changelog_path, 'r') as f:
+            content = f.read()
+        
+        if f"[{version}]" not in content:
+            updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
+            with open(changelog_path, 'w') as f:
+                f.write(updated_content)
+            push_changes(version)
+        else:
+            print(f"Version {version} already exists in changelog")
+
+if __name__ == "__main__":
+    update_changelog()
--- a/src/api.cpp
+++ b/src/api.cpp
@ -279,7 +279,11 @@ bool checkSpoolmanExtraFields() {
        "price_meter",
        "price_gramm",
        "bambu_setting_id",
-        "bambu_idx"
+        "bambu_cali_id",
+        "bambu_idx",
+        "bambu_k",
+        "bambu_flow_ratio",
+        "bambu_max_volspeed"
    };

    String spoolExtraFields[] = {
@ -309,9 +313,27 @@ bool checkSpoolmanExtraFields() {
        "\"field_type\": \"text\","
        "\"key\": \"bambu_setting_id\"}",

-        "{\"name\": \"Bambu IDX\","
+        "{\"name\": \"Bambu Cali ID\","
        "\"field_type\": \"text\","
-        "\"key\": \"bambu_idx\"}"
+        "\"key\": \"bambu_cali_id\"}",
+
+        "{\"name\": \"Bambu Filament IDX\","
+        "\"field_type\": \"text\","
+        "\"key\": \"bambu_idx\"}",
+
+        "{\"name\": \"Bambu k\","
+        "\"field_type\": \"float\","
+        "\"key\": \"bambu_k\"}",
+
+        "{\"name\": \"Bambu Flow Ratio\","
+        "\"field_type\": \"float\","
+        "\"key\": \"bambu_flow_ratio\"}",
+
+        "{\"name\": \"Bambu Max Vol. Speed\","
+        "\"unit\": \"mm3/s\","
+        "\"field_type\": \"integer\","
+        "\"default_value\": \"12\","
+        "\"key\": \"bambu_max_volspeed\"}"
    };

    Serial.println("Überprüfe Extrafelder...");
@ -374,8 +396,10 @@ bool checkSpoolmanExtraFields() {
                            Serial.println("Fehler beim Senden der Anfrage: " + String(http.errorToString(httpCode)));
                            return false;
                        }
-                        http.end();
+                        //http.end();
                    }
+                    yield();
+                    vTaskDelay(100 / portTICK_PERIOD_MS);
                }
            }
        }
--- a/src/bambu.cpp
+++ b/src/bambu.cpp
@ -137,43 +137,8 @@ bool sendMqttMessage(String payload) {
 }

 bool setBambuSpool(String payload) {
-    /* payload
-    //// set Spool
-    {
-        "print": {
-            "sequence_id": 0,
-            "command": "ams_filament_setting",
-            "ams_id": 0, // AMS ID 0-3 oder externe Spule 255
-            "tray_id": 0, // Tray ID 0-3 oder externe Spule 254
-            "tray_color": "000000FF",
-            "nozzle_temp_min": 170,
-            "nozzle_temp_max": 200,
-            "tray_type": "PETG",
-            "setting_id": "",
-            "tray_info_idx": "GFG99"
-        }
-    }
-
-
-
-    //// Remove Spool
-    {
-        "print":{
-            "ams_id":255,
-            "command":"ams_filament_setting",
-            "nozzle_temp_max": 0,
-            "nozzle_temp_min": 0,
-            "sequence_id": 0,
-            "setting_id": "",
-            "tray_color": "FFFFFFFF",
-            "tray_id": 254,
-            "tray_info_idx": "",
-            "tray_type": "",
-        }
-    }
-    */
-
-    Serial.println("Setting spool");
+    Serial.println("Spool settings in");
+    Serial.println(payload);

    // Parse the JSON
    JsonDocument doc;
@ -192,25 +157,29 @@ bool setBambuSpool(String payload) {
    int maxTemp = doc["nozzle_temp_max"];
    String type = doc["type"].as<String>();
    String brand = doc["brand"].as<String>();
-    String tray_info_idx = findFilamentIdx(brand, type);
+    String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
+    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    String setting_id = doc["bambu_setting_id"].as<String>();
+    String cali_idx = doc["cali_idx"].as<String>();

    doc.clear();

    doc["print"]["sequence_id"] = 0;
    doc["print"]["command"] = "ams_filament_setting";
-    doc["print"]["ams_id"] = amsId < 200 ? amsId-1 : 255;
-    doc["print"]["tray_id"] = trayId < 200 ? trayId-1 : 254;
+    doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+    doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
    doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
    doc["print"]["nozzle_temp_min"] = minTemp;
    doc["print"]["nozzle_temp_max"] = maxTemp;
    doc["print"]["tray_type"] = type;
-    doc["print"]["setting_id"] = "";
+    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
    doc["print"]["tray_info_idx"] = tray_info_idx;
+    doc["print"]["setting_id"] = setting_id;

    // Serialize the JSON
    String output;
    serializeJson(doc, output);
-    
+
    if (sendMqttMessage(output)) {
        Serial.println("Spool successfully set");
    }
@ -220,6 +189,67 @@ bool setBambuSpool(String payload) {
        return false;
    }
    
+    doc.clear();
+    yield();
+
+    if (cali_idx != "") {
+        yield();
+        doc["print"]["sequence_id"] = 0;
+        doc["print"]["command"] = "extrusion_cali_sel";
+        doc["print"]["filament_id"] = tray_info_idx;
+        doc["print"]["nozzle_diameter"] = "0.4";
+        doc["print"]["cali_idx"] = cali_idx.toInt();
+        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+
+        // Serialize the JSON
+        String output;
+        serializeJson(doc, output);
+
+        if (sendMqttMessage(output)) {
+            Serial.println("Extrusion calibration successfully set");
+        }
+        else
+        {
+            Serial.println("Failed to set extrusion calibration");
+            return false;
+        }
+
+        doc.clear();
+        yield();
+    }
+/*
+    if (setting_id != "") {
+        yield();
+        doc["print"]["sequence_id"] = 0;
+        doc["print"]["command"] = "ams_filament_setting";
+        doc["print"]["nozzle_temp_min"] = minTemp;
+        doc["print"]["nozzle_temp_max"] = maxTemp;
+        doc["print"]["setting_id"] = setting_id;
+        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
+        doc["print"]["tray_info_idx"] = tray_info_idx;
+        doc["print"]["tray_type"] = type;
+
+        // Serialize the JSON
+        String output;
+        serializeJson(doc, output);
+
+        if (sendMqttMessage(output)) {
+            Serial.println("Filament Setting successfully set");
+        }
+        else
+        {
+            Serial.println("Failed to set Filament setting");
+            return false;
+        }
+
+        doc.clear();
+        yield();
+    }
+*/
+
    return true;
 }

@ -276,7 +306,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                JsonObject trayObj = trayArray[j];
                if (trayObj["tray_info_idx"].as<String>() != ams_data[storedIndex].trays[j].tray_info_idx ||
                    trayObj["tray_type"].as<String>() != ams_data[storedIndex].trays[j].tray_type ||
-                    trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color) {
+                    trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color ||
+                    trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                    hasChanges = true;
                    break;
                }
@ -293,7 +324,8 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                    foundExternal = true;
                    if (vtTray["tray_info_idx"].as<String>() != ams_data[i].trays[0].tray_info_idx ||
                        vtTray["tray_type"].as<String>() != ams_data[i].trays[0].tray_type ||
-                        vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color) {
+                        vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color ||
+                        vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx) {
                        hasChanges = true;
                    }
                    break;
@ -307,7 +339,6 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
        // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
        ams_count = amsArray.size();
        
-        // Restlicher bestehender Code...
        for (int i = 0; i < ams_count && i < 16; i++) {
            JsonObject amsObj = amsArray[i];
            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
@ -324,25 +355,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
                ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
                ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
-            }
-        }
-        //Serial.println("----------------");
-        //Serial.println();
-
-        // Sende die aktualisierten AMS-Daten an alle WebSocket-Clients
-        sendAmsData(nullptr);
-
-        // Verarbeite erst die normalen AMS-Daten
-        for (int i = 0; i < amsArray.size() && i < 16; i++) {
-            JsonObject amsObj = amsArray[i];
-            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
-
-            ams_data[i].ams_id = amsObj["id"].as<uint8_t>();
-            for (int j = 0; j < trayArray.size() && j < 4; j++) {
-                JsonObject trayObj = trayArray[j];
-                ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
-                ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
-                // ... weitere Tray-Daten ...
+                ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
            }
        }
        
@ -362,11 +375,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
            ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
            ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
            ams_count++;  // Erhöhe ams_count für die externe Spule
        }

        // Sende die aktualisierten AMS-Daten
-        sendAmsData(nullptr);
+        //sendAmsData(nullptr);

        // Erstelle JSON für WebSocket-Clients
        JsonDocument wsDoc;
@ -389,18 +403,68 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
                trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
                trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
+                trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
            }
        }

        serializeJson(wsArray, amsJsonData);
        sendAmsData(nullptr);
    }
+    // Neue Bedingung für ams_filament_setting
+    else if (doc["print"]["command"] == "ams_filament_setting") {
+        int amsId = doc["print"]["ams_id"].as<int>();
+        int trayId = doc["print"]["tray_id"].as<int>();
+        String settingId = doc["print"]["setting_id"].as<String>();
+        
+        // Finde das entsprechende AMS und Tray
+        for (int i = 0; i < ams_count; i++) {
+            if (ams_data[i].ams_id == amsId) {
+                // Update setting_id im entsprechenden Tray
+                ams_data[i].trays[trayId].setting_id = settingId;
+                
+                // Erstelle neues JSON für WebSocket-Clients
+                JsonDocument wsDoc;
+                JsonArray wsArray = wsDoc.to<JsonArray>();
+
+                for (int j = 0; j < ams_count; j++) {
+                    JsonObject amsObj = wsArray.createNestedObject();
+                    amsObj["ams_id"] = ams_data[j].ams_id;
+
+                    JsonArray trays = amsObj.createNestedArray("tray");
+                    int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
+                    
+                    for (int k = 0; k < maxTrays; k++) {
+                        JsonObject trayObj = trays.createNestedObject();
+                        trayObj["id"] = ams_data[j].trays[k].id;
+                        trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
+                        trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
+                        trayObj["tray_sub_brands"] = ams_data[j].trays[k].tray_sub_brands;
+                        trayObj["tray_color"] = ams_data[j].trays[k].tray_color;
+                        trayObj["nozzle_temp_min"] = ams_data[j].trays[k].nozzle_temp_min;
+                        trayObj["nozzle_temp_max"] = ams_data[j].trays[k].nozzle_temp_max;
+                        trayObj["setting_id"] = ams_data[j].trays[k].setting_id;
+                        trayObj["cali_idx"] = ams_data[j].trays[k].cali_idx;
+                    }
+                }
+
+                // Aktualisiere das globale amsJsonData
+                amsJsonData = "";
+                serializeJson(wsArray, amsJsonData);
+                
+                // Sende an WebSocket Clients
+                sendAmsData(nullptr);
+                break;
+            }
+        }
+    }
 }

 void reconnect() {
    // Loop until we're reconnected
    while (!client.connected()) {
        Serial.print("Attempting MQTT connection...");
+        bambu_connected = false;
+        oledShowTopRow();

        // Attempt to connect
        if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) {
@ -416,7 +480,8 @@ void reconnect() {
            bambu_connected = false;
            oledShowTopRow();
            // Wait 5 seconds before retrying
-            delay(5000);
+            yield();
+            vTaskDelay(5000 / portTICK_PERIOD_MS);
        }
    }
 }
@ -434,6 +499,8 @@ void mqtt_loop(void * parameter) {
            vTaskDelay(100);
        }
        client.loop();
+        yield();
+        vTaskDelay(100);
    }
 }

@ -466,28 +533,28 @@ bool setupMqtt() {
            //client.subscribe(request_topic.c_str());
            Serial.println("MQTT-Client initialisiert");

-            oledShowTopRow();
            oledShowMessage("Bambu Connected");
            bambu_connected = true;
+            oledShowTopRow();
+
+            xTaskCreatePinnedToCore(
+                mqtt_loop, /* Function to implement the task */
+                "BambuMqtt", /* Name of the task */
+                10000,  /* Stack size in words */
+                NULL,  /* Task input parameter */
+                mqttTaskPrio,  /* Priority of the task */
+                &BambuMqttTask,  /* Task handle. */
+                mqttTaskCore); /* Core where the task should run */
        } 
        else 
        {
            Serial.println("Fehler: Konnte sich nicht beim MQTT-Server anmelden");
            oledShowMessage("Bambu Connection Failed");
-            oledShowTopRow();
            vTaskDelay(2000 / portTICK_PERIOD_MS);
            connected = false;
+            oledShowTopRow();
        }

-        xTaskCreatePinnedToCore(
-            mqtt_loop, /* Function to implement the task */
-            "BambuMqtt", /* Name of the task */
-            10000,  /* Stack size in words */
-            NULL,  /* Task input parameter */
-            mqttTaskPrio,  /* Priority of the task */
-            &BambuMqttTask,  /* Task handle. */
-            mqttTaskCore); /* Core where the task should run */
-
        if (!connected) return false;
    } 
    else 
@ -499,4 +566,11 @@ bool setupMqtt() {
        return false;
    }
    return true;
+}
+
+void bambu_restart() {
+    if (BambuMqttTask) {
+        vTaskDelete(BambuMqttTask);
+    }
+    setupMqtt();
 }
--- a/src/bambu.h
+++ b/src/bambu.h
@ -13,6 +13,7 @@ struct TrayData {
    int nozzle_temp_min;
    int nozzle_temp_max;
    String setting_id;
+    String cali_idx;
 };

 #define MAX_AMS 17  // 16 normale AMS + 1 externe Spule
@ -33,5 +34,6 @@ bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr,
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
+void bambu_restart();

 #endif
--- a/src/main.cpp
+++ b/src/main.cpp
@ -74,6 +74,10 @@ void setup() {

 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
+
+unsigned long lastAmsSendTime = 0;
+const unsigned long amsSendInterval = 60000; // 1 minute
+
 uint8_t weightSend = 0;
 int16_t lastWeight = 0;
 uint8_t wifiErrorCounter = 0;
@ -95,6 +99,12 @@ void loop() {
  // Falls WifiManager im nicht blockenden Modus ist
  //if(wm_nonblocking) wm.process();

+  // Send AMS Data min every Minute
+  if (currentMillis - lastAmsSendTime >= amsSendInterval) {
+    lastAmsSendTime = currentMillis;
+    sendAmsData(nullptr);
+  }
+
  // Ausgabe der Waage auf Display
  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
  {
--- a/src/website.cpp
+++ b/src/website.cpp
@ -69,6 +69,16 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
            }
        }

+        else if (doc["type"] == "reconnect") {
+            if (doc["payload"] == "bambu") {
+                bambu_restart();
+            }
+
+            if (doc["payload"] == "spoolman") {
+                initSpoolman();
+            }
+        }
+
        else if (doc["type"] == "setBambuSpool") {
            Serial.println(doc["payload"].as<String>());
            setBambuSpool(doc["payload"]);
@ -82,24 +92,16 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp

 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
-    if (!SPIFFS.exists(filename) || !SPIFFS.exists("/header.html")) {
+    Serial.println("Lade HTML-Datei: " + String(filename));
+    if (!SPIFFS.exists(filename)) {
        Serial.println("Fehler: Datei nicht gefunden!");
        return "Fehler: Datei nicht gefunden!";
    }

-    // Lade den Header
-    File headerFile = SPIFFS.open("/header.html", "r");
-    String header = headerFile.readString();
-    headerFile.close();
-
-    // Lade die Hauptdatei
    File file = SPIFFS.open(filename, "r");
    String html = file.readString();
    file.close();

-    // Ersetze den Platzhalter mit dem Header
-    html.replace("{{header}}", header);
-
    return html;
 }

@ -159,25 +161,31 @@ void setupWebserver(AsyncWebServer &server) {
    Serial.print("Geladene Spoolman-URL: ");
    Serial.println(spoolmanUrl);

-    // Route für die Startseite
+    // Route für about
    server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("Anfrage für / erhalten");
-        String html = loadHtmlWithHeader("/index.html");
-        request->send(200, "text/html", html);
+        Serial.println("Anfrage für /about erhalten");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/about.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
    });

    // Route für Waage
    server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
        Serial.println("Anfrage für /waage erhalten");
-        String html = loadHtmlWithHeader("/waage.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
    });

    // Route für RFID
    server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
        Serial.println("Anfrage für /rfid erhalten");
-        String html = loadHtmlWithHeader("/rfid.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
        Serial.println("RFID-Seite gesendet");
    });

@ -201,8 +209,10 @@ void setupWebserver(AsyncWebServer &server) {
    // Route für WiFi
    server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
        Serial.println("Anfrage für /wifi erhalten");
-        String html = loadHtmlWithHeader("/wifi.html");
-        request->send(200, "text/html", html);
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
+        request->send(response);
    });

    // Route für Spoolman Setting
@ -283,15 +293,6 @@ void setupWebserver(AsyncWebServer &server) {
        Serial.println("style.css gesendet");
    });

-    server.on("/style2.css", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("Lade style2.css");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/style2.css.gz", "text/css");
-        response->addHeader("Content-Encoding", "gzip");
-        response->addHeader("Cache-Control", CACHE_CONTROL);
-        request->send(response);
-        Serial.println("style2.css gesendet");
-    });
-
    // Route für das Logo
    server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/logo.png.gz", "image/png");
Author	SHA1	Message	Date
Manuel Weiser	0ccc67f4b2	feat: update release workflow trigger and increment version to 1.0.6 Some checks failed Create Release / build (push) Has been cancelled Details	2025-02-16 12:11:30 +01:00
Manuel Weiser	a027dfb54e	chore: remove unnecessary blank line in release workflow configuration	2025-02-16 12:07:14 +01:00
Manuel Weiser	07741f2a52	feat: enhance release workflow by adding permissions for issues and pull requests, and updating GitHub CLI installation method	2025-02-16 12:05:50 +01:00
Manuel Weiser	3e9b89f69b	feat: streamline GitHub Actions release workflow by consolidating permissions and enhancing GitHub CLI installation step	2025-02-16 12:01:41 +01:00
Manuel Weiser	bf67a635f6	feat: add GitHub CLI installation step to release workflow	2025-02-16 11:59:34 +01:00
Manuel Weiser	84cccd5014	feat: update release workflow to include version in asset naming for firmware binaries	2025-02-16 11:58:04 +01:00
Manuel Weiser	e983b0fcfd	feat: update release workflow to use new asset naming and streamline release creation process	2025-02-16 11:53:49 +01:00
Manuel Weiser	e01bb9b1f9	feat: enhance GitHub Actions workflow by adding permissions for discussions and packages	2025-02-16 11:50:51 +01:00
Manuel Weiser	17b6051da0	feat: update GitHub Actions workflow for firmware release and add partition configuration	2025-02-16 11:47:20 +01:00
Manuel Weiser	84617ebc53	feat: add German translation of README and link to it from the English version Some checks failed Create Release / build (push) Has been cancelled Details	2025-02-16 11:18:43 +01:00
Manuel Weiser	8ac6ba57a4	docs: update changelog for version 1.0.5	2025-02-16 10:47:26 +01:00
Manuel Weiser	cc17140dc4	feat: update version to 1.0.5 and enhance changelog update process with automatic git push	2025-02-16 10:47:18 +01:00
Manuel Weiser	8741216374	feat: update changelog script to categorize commits and handle new changelog creation	2025-02-16 10:45:12 +01:00
Manuel Weiser	7bdebeab03	feat: improve changelog update script to handle absolute paths and create new changelog if missing	2025-02-16 10:38:12 +01:00
Manuel Weiser	ab33f423c8	chore: remove deprecated release script Some checks failed Create Release / build (push) Has been cancelled Details	2025-02-16 10:34:56 +01:00
Manuel Weiser	15600ceac5	feat: enhance release script to support upstream push and improve error handling	2025-02-16 10:31:00 +01:00
Manuel Weiser	7ccacec68f	feat: add GitHub Actions workflow for automated release creation and update CHANGELOG.md structure	2025-02-16 10:26:43 +01:00
Manuel Weiser	2f34a0ca4e	feat: update HTML structure and add version display in the navbar	2025-02-16 10:26:36 +01:00
Manuel Weiser	2fb2a2f183	refactor: simplify NFC tag assignment logic and enhance info message styling	2025-02-16 09:29:09 +01:00
Manuel Weiser	269f54b2b3	refactor: clean up mqtt_callback function by removing commented-out code and redundant processing	2025-02-15 15:44:20 +01:00
Manuel Weiser	1c1043ac75	feat: add calibration index handling to tray data and update related API and UI components	2025-02-15 13:30:25 +01:00
Manuel Weiser	d1f22c78f7	feat: implement tray ID handling and add bambu_restart function for MQTT management	2025-02-15 09:05:22 +01:00
Manuel Weiser	3e1490cafc	fix: update calibration index check in displayAmsData function	2025-02-15 09:05:11 +01:00
Manuel Weiser	dc82c04a17	feat: enhance reconnect functionality and improve UI feedback for connection status	2025-02-15 09:01:23 +01:00
Manuel Weiser	c6fd5f8ad5	fix: remove unnecessary SPIFFS creation configuration from platformio.ini	2025-02-15 07:17:10 +01:00
Manuel Weiser	a55cce854e	refactor: remove combined binary creation script and related configurations	2025-02-15 07:14:12 +01:00
Manuel Weiser	c21be92e98	fix: add calibration index to tray properties and update related logic	2025-02-15 07:14:03 +01:00
Manuel Weiser	d4348944fc	fix: update weight and length formatting in statistics display	2025-02-14 19:43:06 +01:00
Manuel Weiser	f1bd896cf1	fix: improve reconnect logic by replacing delay with yield and vTaskDelay	2025-02-14 17:58:12 +01:00
Manuel Weiser	9ace9f0567	fix: enhance Bambu spool handling by adding tray info index and improving logging	2025-02-14 17:40:13 +01:00
Manuel Weiser	0379c4c45f	fix: correct label for filament index in tray properties	2025-02-14 16:49:46 +01:00
Manuel Weiser	49f36bb25b	fix: update MQTT connection logic to ensure proper task creation and connection handling	2025-02-14 16:46:16 +01:00
Manuel Weiser	a05cde8669	fix: add additional Bambu spool settings and update API response structure	2025-02-14 16:29:46 +01:00
Manuel Weiser	64e5a171b6	fix: update MQTT connection logic to handle failures correctly and not try to connect random	2025-02-14 16:01:56 +01:00
Manuel Weiser	bec403ec1b	correct typo	2025-02-14 12:58:12 +01:00
Manuel Weiser	ccc810ab7e	fix: update README with German video link and correct About page link in header	2025-02-14 12:50:51 +01:00
Manuel Weiser	61dadc0aa1	fix: comment out combine_binaries target in PlatformIO configuration	2025-02-14 10:50:04 +01:00
Manuel Weiser	a2ee9a98a6	fix: update Bambu spool settings and connection handling logic	2025-02-14 10:35:47 +01:00
Manuel Weiser	ae96c729b1	Corrected Amazon Links in Readme	2025-02-13 21:40:41 +01:00
Manuel Weiser	1d337dd990	add PlatformIO configuration file for ESP32 development with custom build targets	2025-02-13 20:59:07 +01:00
Manuel Weiser	cfa6c12d65	add script to combine firmware and SPIFFS binaries, and remove unused display files	2025-02-13 18:42:34 +01:00
Manuel Weiser	b2aeae5815	add link to image folder and FilaMan website in README for additional resources	2025-02-13 17:39:41 +01:00
Manuel Weiser	5cdbc5f2cc	add new image assets for enhanced visual content	2025-02-13 17:37:17 +01:00
Manuel Weiser	7a5415ad80	add FilaMan website link to README for additional resource	2025-02-13 16:57:07 +01:00
Manuel Weiser	36fd271d0c	remove unused image files and update scale image for clarity	2025-02-13 16:24:49 +01:00
Manuel Weiser	a39e199c79	update "Buy Me A Coffee" button size in README for better visibility	2025-02-13 16:22:52 +01:00
Manuel Weiser	b7004f5b71	add scale image to README for enhanced visual representation	2025-02-13 16:19:42 +01:00
Manuel Weiser	e5bf05ee43	refactor header and RFID display logic, add spool out functionality, and update image assets	2025-02-13 16:13:46 +01:00
Manuel Weiser	f01a42d850	implement AMS data sending every minute and remove unused CSS file	2025-02-13 13:38:15 +01:00