e51e691eeb
- Incremented to v1.1a, rather than keep 1.0e. This is because there are existing v1.0 installations. Don’t want to confuse people further. - Certain version of the Arduino IDE did not like the `inline` in the function header. Removed from spindle_control files to fix the problem. - Tweaked the communication protocol slightly. Added message type indicators for all `[]`bracketed feedback messages. It’s been problematic for GUI dev to try to determine the context of a message and how it should be handled. These indictors should help tremendously to remove context all together. - Also altered how `$N` startup lines are presented when executed. They now start with an open chevron ‘>’ followed by the line and an ‘:ok’ to indicate it executed. The ‘ok’ is on the same line intentionally so it doesn’t mess up a streaming protocol counter. - Managed to save a 100+KB from refactoring parts of report.c. (Thanks Vasilis!) Freed up room to alter the protocol a little. - Wrote a markdown document on interface messaging to make it clear how it’s intended to work. See interface.md in /doc/markdown - Started to pull in some Wiki pages from the old grbl site and beginning to update them for v1.1. - Created new commit log for v1.1.
56 lines
1.8 KiB
C
56 lines
1.8 KiB
C
/*
|
|
print.h - Functions for formatting output strings
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2016 Sungeun K. Jeon for Gnea Research LLC
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef print_h
|
|
#define print_h
|
|
|
|
|
|
void printString(const char *s);
|
|
|
|
void printPgmString(const char *s);
|
|
|
|
void printInteger(long n);
|
|
|
|
void print_uint32_base10(uint32_t n);
|
|
|
|
// Prints an uint8 variable in base 10.
|
|
void print_uint8_base10(uint8_t n);
|
|
|
|
// Prints an uint8 variable in base 2 with desired number of desired digits.
|
|
void print_uint8_base2_ndigit(uint8_t n, uint8_t digits);
|
|
|
|
void printFloat(float n, uint8_t decimal_places);
|
|
|
|
// Floating value printing handlers for special variables types used in Grbl.
|
|
// - CoordValue: Handles all position or coordinate values in inches or mm reporting.
|
|
// - RateValue: Handles feed rate and current velocity in inches or mm reporting.
|
|
// - SettingValue: Handles all floating point settings values (always in mm.)
|
|
// - RPMValue: Handles spindle RPM values in settings and reports.
|
|
void printFloat_CoordValue(float n);
|
|
void printFloat_RateValue(float n);
|
|
// void printFloat_SettingValue(float n);
|
|
void printFloat_RPMValue(float n);
|
|
|
|
// Debug tool to print free memory in bytes at the called point. Not used otherwise.
|
|
void printFreeMemory();
|
|
|
|
#endif
|