122 lines
3.9 KiB
C
122 lines
3.9 KiB
C
/*
|
|
config.h - eeprom and compile time configuration handling
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef config_h
|
|
#define config_h
|
|
|
|
#define VERSION "0.51"
|
|
#include <math.h>
|
|
#include <inttypes.h>
|
|
|
|
// Settings that can only be set at compile-time:
|
|
|
|
#define BAUD_RATE 9600
|
|
//#define BAUD_RATE 115200
|
|
|
|
#define STEPPERS_ENABLE_DDR DDRD
|
|
#define STEPPERS_ENABLE_PORT PORTD
|
|
#define STEPPERS_ENABLE_BIT 2
|
|
|
|
#define STEPPING_DDR DDRC
|
|
#define STEPPING_PORT PORTC
|
|
#define X_STEP_BIT 0
|
|
#define Y_STEP_BIT 1
|
|
#define Z_STEP_BIT 2
|
|
#define X_DIRECTION_BIT 3
|
|
#define Y_DIRECTION_BIT 4
|
|
#define Z_DIRECTION_BIT 5
|
|
|
|
#define LIMIT_DDR DDRD
|
|
#define LIMIT_PORT PORTD
|
|
#define X_LIMIT_BIT 3
|
|
#define Y_LIMIT_BIT 4
|
|
#define Z_LIMIT_BIT 5
|
|
|
|
#define SPINDLE_ENABLE_DDR DDRD
|
|
#define SPINDLE_ENABLE_PORT PORTD
|
|
#define SPINDLE_ENABLE_BIT 6
|
|
|
|
#define SPINDLE_DIRECTION_DDR DDRD
|
|
#define SPINDLE_DIRECTION_PORT PORTD
|
|
#define SPINDLE_DIRECTION_BIT 7
|
|
|
|
|
|
// Version of the EEPROM data. Will be used to migrate existing data from older versions of Grbl
|
|
// when firmware is upgraded. Always stored in byte 0 of eeprom
|
|
#define SETTINGS_VERSION 1
|
|
|
|
// Current global settings (persisted in EEPROM from byte 1 onwards)
|
|
struct Settings {
|
|
double steps_per_mm[3];
|
|
uint8_t microsteps;
|
|
uint8_t pulse_microseconds;
|
|
double default_feed_rate;
|
|
double default_seek_rate;
|
|
uint8_t invert_mask;
|
|
double mm_per_arc_segment;
|
|
double acceleration;
|
|
};
|
|
struct Settings settings;
|
|
|
|
// Initialize the configuration subsystem (load settings from EEPROM)
|
|
void config_init();
|
|
|
|
// Print current settings
|
|
void dump_settings();
|
|
|
|
// A helper method to set new settings from command line
|
|
void store_setting(int parameter, double value);
|
|
|
|
|
|
// Default settings (used when resetting eeprom-settings)
|
|
#define MICROSTEPS 8
|
|
#define X_STEPS_PER_MM (94.488188976378*MICROSTEPS)
|
|
#define Y_STEPS_PER_MM (94.488188976378*MICROSTEPS)
|
|
#define Z_STEPS_PER_MM (94.488188976378*MICROSTEPS)
|
|
#define STEP_PULSE_MICROSECONDS 30
|
|
|
|
#define MM_PER_ARC_SEGMENT 0.1
|
|
|
|
#define RAPID_FEEDRATE 480.0 // in millimeters per minute
|
|
#define DEFAULT_FEEDRATE 480.0
|
|
#define DEFAULT_ACCELERATION (DEFAULT_FEEDRATE/100.0)
|
|
|
|
// Use this line for default operation (step-pulses high)
|
|
#define STEPPING_INVERT_MASK 0
|
|
// Uncomment this line for inverted stepping (step-pulses low, rest high)
|
|
// #define STEPPING_INVERT_MASK (STEP_MASK)
|
|
// Uncomment this line to invert all step- and direction bits
|
|
// #define STEPPING_INVERT_MASK (STEPPING_MASK)
|
|
// Or bake your own like this adding any step-bits or directions you want to invert:
|
|
// #define STEPPING_INVERT_MASK (STEP_MASK | (1<<X_DIRECTION_BIT) | (1<<Y_DIRECTION_BIT))
|
|
|
|
// The temporal resolution of the acceleration management subsystem
|
|
#define ACCELERATION_TICKS_PER_SECOND 10
|
|
|
|
// Some useful constants
|
|
#define STEP_MASK ((1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)) // All step bits
|
|
#define DIRECTION_MASK ((1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)) // All direction bits
|
|
#define STEPPING_MASK (STEP_MASK | DIRECTION_MASK) // All stepping-related bits (step/direction)
|
|
#define LIMIT_MASK ((1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)) // All limit bits
|
|
|
|
#define INCHES_PER_MM (1.0/25.4) // A conversion rate
|
|
|
|
#endif
|