d1037268c8
- New $SLP sleep mode that will disable spindle, coolant, and stepper enable pins. Allows users to disable their steppers without having to alter their settings. A reset is required to exit and re-initializes in alarm state. - Laser mode wasn’t updating the spindle PWM correctly (effected spindle speed overrides) and not checking for modal states either. Fixed both issues. - While in laser mode, parking motions are ignored, since the power off delay with the retract motion would burn the material. It will just turn off and not move. A restore immediately powers up and resumes. No delays. - Changing rpm max and min settings did not update the spindle PWM calculations. Now fixed. - Increased default planner buffer from 16 to 17 block. It seems to be stable, but need to monitor this carefully. - Removed software debounce routine for limit pins. Obsolete. - Fixed a couple parking motion bugs. One related to restoring incorrectly and the other the parking rate wasn’t compatible with the planner structs. - Fixed a bug caused by refactoring the critical alarms in a recent push. Soft limits weren’t invoking a critical alarm. - Updated the documentation with the new sleep feature and added some more details to the change summary.
65 lines
1.6 KiB
C
65 lines
1.6 KiB
C
/*
|
|
grbl.h - main Grbl include file
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2015-2016 Sungeun K. Jeon for Gnea Research LLC
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef grbl_h
|
|
#define grbl_h
|
|
|
|
// Grbl versioning system
|
|
#define GRBL_VERSION "1.1c"
|
|
#define GRBL_VERSION_BUILD "20161011"
|
|
|
|
// Define standard libraries used by Grbl.
|
|
#include <avr/io.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/wdt.h>
|
|
#include <util/delay.h>
|
|
#include <math.h>
|
|
#include <inttypes.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
// Define the Grbl system include files. NOTE: Do not alter organization.
|
|
#include "config.h"
|
|
#include "nuts_bolts.h"
|
|
#include "settings.h"
|
|
#include "system.h"
|
|
#include "defaults.h"
|
|
#include "cpu_map.h"
|
|
#include "planner.h"
|
|
#include "coolant_control.h"
|
|
#include "eeprom.h"
|
|
#include "gcode.h"
|
|
#include "limits.h"
|
|
#include "motion_control.h"
|
|
#include "planner.h"
|
|
#include "print.h"
|
|
#include "probe.h"
|
|
#include "protocol.h"
|
|
#include "report.h"
|
|
#include "serial.h"
|
|
#include "spindle_control.h"
|
|
#include "stepper.h"
|
|
#include "jog.h"
|
|
|
|
#endif
|