cc9afdc195
- Added a new source and header file called system. These files contain the system commands and variables, as well as all of the system headers and standard libraries Grbl uses. Centralizing some of the code. - Re-organized the include headers throughout the source code. - ENABLE_M7 define was missing from config.h. Now there. - SPINDLE_MAX_RPM and SPINDLE_MIN_RPM now defined in config.h. No uncommenting to prevent user issues. Minimum spindle RPM now provides the lower, near 0V, scale adjustment, i.e. some spindles can go really slow so why use up our 256 voltage bins for them? - Remove some persistent variables from coolant and spindle control. They were redundant. - Removed a VARIABLE_SPINDLE define in cpu_map.h that shouldn’t have been there. - Changed the DEFAULT_ARC_TOLERANCE to 0.002mm to improve arc tracing. Before we had issues with performance, no longer. - Fixed a bug with the hard limits and the software debounce feature enabled. The invert limit pin setting wasn’t honored. - Fixed a bug with the homing direction mask. Now is like it used to be. At least for now. - Re-organized main.c to serve as only as the reset/initialization routine. Makes things a little bit clearer in terms of execution procedures. - Re-organized protocol.c as the overall master control unit for execution procedures. Not quite there yet, but starting to make a little more sense in how things are run. - Removed updating of old settings records. So many new settings have been added that it’s not worth adding the code to migrate old user settings. - Tweaked spindle_control.c a bit and made it more clear and consistent with other parts of Grbl. - Tweaked the stepper disable bit code in stepper.c. Requires less flash memory.
91 lines
3.1 KiB
C
91 lines
3.1 KiB
C
/*
|
|
main.c - An embedded CNC Controller with rs274/ngc (g-code) support
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2014 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "system.h"
|
|
#include "serial.h"
|
|
#include "settings.h"
|
|
#include "protocol.h"
|
|
#include "gcode.h"
|
|
#include "planner.h"
|
|
#include "stepper.h"
|
|
#include "spindle_control.h"
|
|
#include "coolant_control.h"
|
|
#include "motion_control.h"
|
|
#include "limits.h"
|
|
#include "report.h"
|
|
|
|
|
|
// Declare system global variable structure
|
|
system_t sys;
|
|
|
|
|
|
int main(void)
|
|
{
|
|
// Initialize system upon power-up.
|
|
serial_init(); // Setup serial baud rate and interrupts
|
|
settings_init(); // Load grbl settings from EEPROM
|
|
stepper_init(); // Configure stepper pins and interrupt timers
|
|
system_init(); // Configure pinout pins and pin-change interrupt
|
|
sei();
|
|
|
|
memset(&sys, 0, sizeof(sys)); // Clear all system variables
|
|
sys.abort = true; // Set abort to complete initialization
|
|
|
|
// Check for power-up and set system alarm if homing is enabled to force homing cycle
|
|
// by setting Grbl's alarm state. Alarm locks out all g-code commands, including the
|
|
// startup scripts, but allows access to settings and internal commands. Only a homing
|
|
// cycle '$H' or kill alarm locks '$X' will disable the alarm.
|
|
// NOTE: The startup script will run after successful completion of the homing cycle, but
|
|
// not after disabling the alarm locks. Prevents motion startup blocks from crashing into
|
|
// things uncontrollably. Very bad.
|
|
#ifdef HOMING_INIT_LOCK
|
|
if (bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE)) { sys.state = STATE_ALARM; }
|
|
#endif
|
|
|
|
for(;;) {
|
|
|
|
// Reset the system primary functionality.
|
|
serial_reset_read_buffer(); // Clear serial read buffer
|
|
gc_init(); // Set g-code parser to default state
|
|
spindle_init();
|
|
coolant_init();
|
|
limits_init();
|
|
plan_reset(); // Clear block buffer and planner variables
|
|
st_reset(); // Clear stepper subsystem variables.
|
|
|
|
// Sync cleared gcode and planner positions to current system position.
|
|
plan_sync_position();
|
|
gc_sync_position();
|
|
|
|
// Reset system variables.
|
|
sys.abort = false;
|
|
sys.execute = 0;
|
|
if (bit_istrue(settings.flags,BITFLAG_AUTO_START)) { sys.auto_start = true; }
|
|
else { sys.auto_start = false; }
|
|
|
|
// Start main loop. Processes inputs and executes them.
|
|
// NOTE: Upon a system abort, the main loop returns and re-initializes the system.
|
|
protocol_process();
|
|
|
|
}
|
|
return 0; /* Never reached */
|
|
}
|