cc9afdc195
- Added a new source and header file called system. These files contain the system commands and variables, as well as all of the system headers and standard libraries Grbl uses. Centralizing some of the code. - Re-organized the include headers throughout the source code. - ENABLE_M7 define was missing from config.h. Now there. - SPINDLE_MAX_RPM and SPINDLE_MIN_RPM now defined in config.h. No uncommenting to prevent user issues. Minimum spindle RPM now provides the lower, near 0V, scale adjustment, i.e. some spindles can go really slow so why use up our 256 voltage bins for them? - Remove some persistent variables from coolant and spindle control. They were redundant. - Removed a VARIABLE_SPINDLE define in cpu_map.h that shouldn’t have been there. - Changed the DEFAULT_ARC_TOLERANCE to 0.002mm to improve arc tracing. Before we had issues with performance, no longer. - Fixed a bug with the hard limits and the software debounce feature enabled. The invert limit pin setting wasn’t honored. - Fixed a bug with the homing direction mask. Now is like it used to be. At least for now. - Re-organized main.c to serve as only as the reset/initialization routine. Makes things a little bit clearer in terms of execution procedures. - Re-organized protocol.c as the overall master control unit for execution procedures. Not quite there yet, but starting to make a little more sense in how things are run. - Removed updating of old settings records. So many new settings have been added that it’s not worth adding the code to migrate old user settings. - Tweaked spindle_control.c a bit and made it more clear and consistent with other parts of Grbl. - Tweaked the stepper disable bit code in stepper.c. Requires less flash memory.
233 lines
11 KiB
C
233 lines
11 KiB
C
/*
|
|
defaults.h - defaults settings configuration file
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2012-2014 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* The defaults.h file serves as a central default settings file for different machine
|
|
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
|
here are supplied by users, so your results may vary. However, this should give you
|
|
a good starting point as you get to know your machine and tweak the settings for your
|
|
our nefarious needs. */
|
|
|
|
#ifndef defaults_h
|
|
#define defaults_h
|
|
|
|
#ifdef DEFAULTS_GENERIC
|
|
// Grbl generic default settings. Should work across different machines.
|
|
#define DEFAULT_X_STEPS_PER_MM 250.0
|
|
#define DEFAULT_Y_STEPS_PER_MM 250.0
|
|
#define DEFAULT_Z_STEPS_PER_MM 250.0
|
|
#define DEFAULT_X_MAX_RATE 500.0 // mm/min
|
|
#define DEFAULT_Y_MAX_RATE 500.0 // mm/min
|
|
#define DEFAULT_Z_MAX_RATE 500.0 // mm/min
|
|
#define DEFAULT_X_ACCELERATION (10.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Y_ACCELERATION (10.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Z_ACCELERATION (10.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_FEEDRATE 250.0 // mm/min
|
|
#define DEFAULT_STEPPING_INVERT_MASK 0
|
|
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
|
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
|
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_SEEK_RATE 500.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_SHERLINE_5400
|
|
// Description: Sherline 5400 mill with three NEMA 23 Keling KL23H256-21-8B 185 oz-in stepper motors,
|
|
// driven by three Pololu A4988 stepper drivers with a 30V, 6A power supply at 1.5A per winding.
|
|
#define MICROSTEPS 2
|
|
#define STEPS_PER_REV 200.0
|
|
#define MM_PER_REV (0.050*MM_PER_INCH) // 0.050 inch/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_X_MAX_RATE 635.0 // mm/min (25 ipm)
|
|
#define DEFAULT_Y_MAX_RATE 635.0 // mm/min
|
|
#define DEFAULT_Z_MAX_RATE 635.0 // mm/min
|
|
#define DEFAULT_X_ACCELERATION (50.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Y_ACCELERATION (50.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Z_ACCELERATION (50.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_X_MAX_TRAVEL 225.0 // mm
|
|
#define DEFAULT_Y_MAX_TRAVEL 125.0 // mm
|
|
#define DEFAULT_Z_MAX_TRAVEL 170.0 // mm
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_FEEDRATE 254.0 // mm/min (10 ipm)
|
|
#define DEFAULT_STEPPING_INVERT_MASK 0
|
|
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
|
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_REPORT_INCHES 0 // true
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
|
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_FEED_RATE 50.0 // mm/min
|
|
#define DEFAULT_HOMING_SEEK_RATE 635.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_SHAPEOKO
|
|
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
|
// grblShield with a 24V, 4.2A power supply.
|
|
#define MICROSTEPS_XY 8
|
|
#define STEP_REVS_XY 400
|
|
#define MM_PER_REV_XY (0.08*18*MM_PER_INCH) // 0.08 in belt pitch, 18 pulley teeth
|
|
#define MICROSTEPS_Z 2
|
|
#define STEP_REVS_Z 400
|
|
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
|
#define DEFAULT_X_MAX_RATE 1000.0 // mm/min
|
|
#define DEFAULT_Y_MAX_RATE 1000.0 // mm/min
|
|
#define DEFAULT_Z_MAX_RATE 1000.0 // mm/min
|
|
#define DEFAULT_X_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Y_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Z_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_FEEDRATE 250.0
|
|
#define DEFAULT_STEPPING_INVERT_MASK 0
|
|
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
|
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
|
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_SHAPEOKO_2
|
|
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
|
// grblShield with a 24V, 4.2A power supply.
|
|
#define MICROSTEPS_XY 8
|
|
#define STEP_REVS_XY 200
|
|
#define MM_PER_REV_XY (2.0*20) // 2mm belt pitch, 20 pulley teeth
|
|
#define MICROSTEPS_Z 2
|
|
#define STEP_REVS_Z 200
|
|
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
|
#define DEFAULT_X_MAX_RATE 800.0 // mm/min
|
|
#define DEFAULT_Y_MAX_RATE 800.0 // mm/min
|
|
#define DEFAULT_Z_MAX_RATE 800.0 // mm/min
|
|
#define DEFAULT_X_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Y_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Z_ACCELERATION (15.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_X_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Y_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_Z_MAX_TRAVEL 200.0 // mm
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_FEEDRATE 250.0
|
|
#define DEFAULT_STEPPING_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-254, 255 keeps steppers enabled)
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
|
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
|
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_ZEN_TOOLWORKS_7x7
|
|
// Description: Zen Toolworks 7x7 mill with three Shinano SST43D2121 65oz-in NEMA 17 stepper motors.
|
|
// Leadscrew is different from some ZTW kits, where most are 1.25mm/rev rather than 8.0mm/rev here.
|
|
// Driven by 30V, 6A power supply and TI DRV8811 stepper motor drivers.
|
|
#define MICROSTEPS 8
|
|
#define STEPS_PER_REV 200.0
|
|
#define MM_PER_REV 8.0 // 8 mm/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Y_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Z_STEPS_PER_MM (STEPS_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_X_MAX_RATE 6000.0 // mm/min
|
|
#define DEFAULT_Y_MAX_RATE 6000.0 // mm/min
|
|
#define DEFAULT_Z_MAX_RATE 6000.0 // mm/min
|
|
#define DEFAULT_X_ACCELERATION (600.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Y_ACCELERATION (600.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_Z_ACCELERATION (600.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_X_MAX_TRAVEL 190.0 // mm
|
|
#define DEFAULT_Y_MAX_TRAVEL 180.0 // mm
|
|
#define DEFAULT_Z_MAX_TRAVEL 150.0 // mm
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_FEEDRATE 1000.0 // mm/min
|
|
#define DEFAULT_STEPPING_INVERT_MASK 0
|
|
#define DEFAULT_DIRECTION_INVERT_MASK ((1<<Y_DIRECTION_BIT))
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-254, 255 keeps steppers enabled)
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.02 // mm
|
|
#define DEFAULT_ARC_TOLERANCE 0.002 // mm
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_INVERT_LIMIT_PINS 0 // false
|
|
#define DEFAULT_SOFT_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_FEED_RATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_SEEK_RATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 250 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#endif
|
|
|
|
#endif
|