c7db1c4546
- New configuration option at compile-time: - Force alarm upon power-up or hard reset. When homing is enabled, this is already the default behavior. This simply forces this all of the time. - GUI reporting mode. Removes most human-readable strings that GUIs don’t need. This saves nearly 2KB in flash space that can be used for other features. - Hard limit force state check: In the hard limit pin change ISR, Grbl by default sets the hard limit alarm upon any pin change to guarantee the alarm is set. If this option is set, it’ll check the state within the ISR, but can’t guarantee the pin will be read correctly if the switch is bouncing. This option makes hard limit behavior a little less annoying if you have a good buffered switch circuit that removes bouncing and electronic noise. - Software debounce bug fix. It was reading the pin incorrectly for the setting. - Re-factored some of the ‘$’ settings code.
63 lines
1.6 KiB
C
63 lines
1.6 KiB
C
/*
|
|
grbl.h - main Grbl include file
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2015 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef grbl_h
|
|
#define grbl_h
|
|
|
|
// Grbl versioning system
|
|
#define GRBL_VERSION "0.9i"
|
|
#define GRBL_VERSION_BUILD "20150223"
|
|
|
|
// Define standard libraries used by Grbl.
|
|
#include <avr/io.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/interrupt.h>
|
|
#include <avr/wdt.h>
|
|
#include <util/delay.h>
|
|
#include <math.h>
|
|
#include <inttypes.h>
|
|
#include <string.h>
|
|
#include <stdlib.h>
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
// Define the Grbl system include files. NOTE: Do not alter organization.
|
|
#include "config.h"
|
|
#include "nuts_bolts.h"
|
|
#include "settings.h"
|
|
#include "system.h"
|
|
#include "defaults.h"
|
|
#include "cpu_map.h"
|
|
#include "coolant_control.h"
|
|
#include "eeprom.h"
|
|
#include "gcode.h"
|
|
#include "limits.h"
|
|
#include "motion_control.h"
|
|
#include "planner.h"
|
|
#include "print.h"
|
|
#include "probe.h"
|
|
#include "protocol.h"
|
|
#include "report.h"
|
|
#include "serial.h"
|
|
#include "spindle_control.h"
|
|
#include "stepper.h"
|
|
|
|
#endif
|