9e0ce55dbc
- Updated interface protocol to play nicer with interface programs. All Grbl responses beginning with '$' signifies a setting. Bracketed '[]' responses are feedback messages containing either state, parameter, or general messages. Chevron '<>' response are from the real-time status messages, i.e. position. - M2 Program end command was causing a system alarm. Fixed. Thanks @blinkenlight !
123 lines
5.4 KiB
C
123 lines
5.4 KiB
C
/*
|
|
defaults.h - defaults settings configuration file
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2012 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* The defaults.h file serves as a central default settings file for different machine
|
|
types, from DIY CNC mills to CNC conversions of off-the-shelf machines. The settings
|
|
here are supplied by users, so your results may vary. However, this should give you
|
|
a good starting point as you get to know your machine and tweak the settings for your
|
|
our nefarious needs. */
|
|
|
|
#ifndef defaults_h
|
|
#define defaults_h
|
|
|
|
#ifdef DEFAULTS_GENERIC
|
|
// Grbl generic default settings. Should work across different machines.
|
|
#define DEFAULT_X_STEPS_PER_MM 250.0
|
|
#define DEFAULT_Y_STEPS_PER_MM 250.0
|
|
#define DEFAULT_Z_STEPS_PER_MM 250.0
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_MM_PER_ARC_SEGMENT 0.1
|
|
#define DEFAULT_RAPID_FEEDRATE 500.0 // mm/min
|
|
#define DEFAULT_FEEDRATE 250.0
|
|
#define DEFAULT_ACCELERATION (10.0*60*60) // 10 mm/min^2
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
|
#define DEFAULT_STEPPING_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_RAPID_FEEDRATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_FEEDRATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 100 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-255)
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_N_ARC_CORRECTION 25
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_SHERLINE_5400
|
|
// Description: Sherline 5400 mill with three NEMA 23 185 oz-in stepper motors, driven by
|
|
// three Pololu A4988 stepper drivers with a 30V, 6A power supply at 1.5A per winding.
|
|
#define MICROSTEPS 4
|
|
#define STEPS_PER_REV 200.0
|
|
#define MM_PER_REV (0.050*MM_PER_INCH)) // 0.050 inch/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (STEP_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Y_STEPS_PER_MM (STEP_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_Z_STEPS_PER_MM (STEP_PER_REV*MICROSTEPS/MM_PER_REV)
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_MM_PER_ARC_SEGMENT 0.1
|
|
#define DEFAULT_RAPID_FEEDRATE 635.0 // mm/min (25ipm)
|
|
#define DEFAULT_FEEDRATE 254.0 // mm/min (10ipm)
|
|
#define DEFAULT_ACCELERATION 50.0*60*60 // 50 mm/min^2
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
|
#define DEFAULT_STEPPING_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_REPORT_INCHES 1 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_RAPID_FEEDRATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_FEEDRATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 100 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 25 // msec (0-255)
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_N_ARC_CORRECTION 25
|
|
#endif
|
|
|
|
#ifdef DEFAULTS_SHAPEOKO
|
|
// Description: Shapeoko CNC mill with three NEMA 17 stepper motors, driven by Synthetos
|
|
// grblShield with a 24V, 4.2A power supply.
|
|
#define MICROSTEPS_XY 8
|
|
#define STEP_REVS_XY 400
|
|
#define MM_PER_REV_XY (0.08*18*MM_PER_INCH) // 0.08 in belt pitch, 18 pulley teeth
|
|
#define MICROSTEPS_Z 2
|
|
#define STEP_REVS_Z 400
|
|
#define MM_PER_REV_Z 1.250 // 1.25 mm/rev leadscrew
|
|
#define DEFAULT_X_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Y_STEPS_PER_MM (MICROSTEPS_XY*STEP_REVS_XY/MM_PER_REV_XY)
|
|
#define DEFAULT_Z_STEPS_PER_MM (MICROSTEPS_Z*STEP_REVS_Z/MM_PER_REV_Z)
|
|
#define DEFAULT_STEP_PULSE_MICROSECONDS 10
|
|
#define DEFAULT_MM_PER_ARC_SEGMENT 0.1
|
|
#define DEFAULT_RAPID_FEEDRATE 1000.0 // mm/min
|
|
#define DEFAULT_FEEDRATE 250.0
|
|
#define DEFAULT_ACCELERATION (15.0*60*60) // 15 mm/min^2
|
|
#define DEFAULT_JUNCTION_DEVIATION 0.05 // mm
|
|
#define DEFAULT_STEPPING_INVERT_MASK ((1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT))
|
|
#define DEFAULT_REPORT_INCHES 0 // false
|
|
#define DEFAULT_AUTO_START 1 // true
|
|
#define DEFAULT_INVERT_ST_ENABLE 0 // false
|
|
#define DEFAULT_HARD_LIMIT_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_ENABLE 0 // false
|
|
#define DEFAULT_HOMING_DIR_MASK 0 // move positive dir
|
|
#define DEFAULT_HOMING_RAPID_FEEDRATE 250.0 // mm/min
|
|
#define DEFAULT_HOMING_FEEDRATE 25.0 // mm/min
|
|
#define DEFAULT_HOMING_DEBOUNCE_DELAY 100 // msec (0-65k)
|
|
#define DEFAULT_HOMING_PULLOFF 1.0 // mm
|
|
#define DEFAULT_STEPPER_IDLE_LOCK_TIME 255 // msec (0-255)
|
|
#define DEFAULT_DECIMAL_PLACES 3
|
|
#define DEFAULT_N_ARC_CORRECTION 25
|
|
#endif
|
|
|
|
#endif
|