b9c3461932
- G38.x was not printing correctly in the $G g-code state reports. Now fixed. - When investigating the above issue, it was noticed that G38.x wouldn’t show at all, but instead a G0 would be printed. This was unlike the v0.9j master build. It turned out volatile variables do not like to be defined inside a C struct. These are undefined on how to be handled. Once pulled out, all weird issues went away. - Also changed two ‘sizeof()’ statements in the mc_probe() and probe_state_monitor() functions to be more robust later on. - Updated the commit logs to individual files for each minor release. Forgot to update the generating script to account for this.
557 lines
27 KiB
C
557 lines
27 KiB
C
/*
|
|
protocol.c - controls Grbl execution protocol and procedures
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2015 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "grbl.h"
|
|
|
|
// Define line flags. Includes comment type tracking and line overflow detection.
|
|
#define LINE_FLAG_OVERFLOW bit(0)
|
|
#define LINE_FLAG_COMMENT_PARENTHESES bit(1)
|
|
#define LINE_FLAG_COMMENT_SEMICOLON bit(2)
|
|
|
|
|
|
static char line[LINE_BUFFER_SIZE]; // Line to be executed. Zero-terminated.
|
|
|
|
static void protocol_exec_rt_suspend();
|
|
|
|
|
|
/*
|
|
GRBL PRIMARY LOOP:
|
|
*/
|
|
void protocol_main_loop()
|
|
{
|
|
// ------------------------------------------------------------
|
|
// Complete initialization procedures upon a power-up or reset.
|
|
// ------------------------------------------------------------
|
|
|
|
// Print welcome message
|
|
report_init_message();
|
|
|
|
// Check for and report alarm state after a reset, error, or an initial power up.
|
|
if (sys.state == STATE_ALARM) {
|
|
report_feedback_message(MESSAGE_ALARM_LOCK);
|
|
} else {
|
|
// All systems go! But first check for safety door.
|
|
sys.state = STATE_IDLE;
|
|
if (system_check_safety_door_ajar()) {
|
|
bit_true(sys_rt_exec_state, EXEC_SAFETY_DOOR);
|
|
protocol_execute_realtime(); // Enter safety door mode. Should return as IDLE state.
|
|
}
|
|
system_execute_startup(line); // Execute startup script.
|
|
}
|
|
|
|
// ---------------------------------------------------------------------------------
|
|
// Primary loop! Upon a system abort, this exits back to main() to reset the system.
|
|
// ---------------------------------------------------------------------------------
|
|
|
|
uint8_t line_flags = 0;
|
|
uint8_t char_counter = 0;
|
|
uint8_t c;
|
|
for (;;) {
|
|
|
|
// Process one line of incoming serial data, as the data becomes available. Performs an
|
|
// initial filtering by removing spaces and comments and capitalizing all letters.
|
|
|
|
// NOTE: While comment, spaces, and block delete(if supported) handling should technically
|
|
// be done in the g-code parser, doing it here helps compress the incoming data into Grbl's
|
|
// line buffer, which is limited in size. The g-code standard actually states a line can't
|
|
// exceed 256 characters, but the Arduino Uno does not have the memory space for this.
|
|
// With a better processor, it would be very easy to pull this initial parsing out as a
|
|
// seperate task to be shared by the g-code parser and Grbl's system commands.
|
|
|
|
while((c = serial_read()) != SERIAL_NO_DATA) {
|
|
if ((c == '\n') || (c == '\r')) { // End of line reached
|
|
|
|
protocol_execute_realtime(); // Runtime command check point.
|
|
if (sys.abort) { return; } // Bail to calling function upon system abort
|
|
|
|
line[char_counter] = 0; // Set string termination character.
|
|
#ifdef REPORT_ECHO_LINE_RECEIVED
|
|
report_echo_line_received(line);
|
|
#endif
|
|
|
|
// Direct and execute one line of formatted input, and report status of execution.
|
|
if (line_flags & LINE_FLAG_OVERFLOW) {
|
|
// Report line overflow error.
|
|
report_status_message(STATUS_OVERFLOW);
|
|
} else if (line[0] == 0) {
|
|
// Empty or comment line. For syncing purposes.
|
|
report_status_message(STATUS_OK);
|
|
} else if (line[0] == '$') {
|
|
// Grbl '$' system command
|
|
report_status_message(system_execute_line(line));
|
|
} else if (sys.state == STATE_ALARM) {
|
|
// Everything else is gcode. Block if in alarm mode.
|
|
report_status_message(STATUS_ALARM_LOCK);
|
|
} else {
|
|
// Parse and execute g-code block.
|
|
report_status_message(gc_execute_line(line));
|
|
}
|
|
|
|
// Reset tracking data for next line.
|
|
line_flags = 0;
|
|
char_counter = 0;
|
|
|
|
} else {
|
|
|
|
if (line_flags) {
|
|
// Throw away all (except EOL) comment characters and overflow characters.
|
|
if (c == ')') {
|
|
// End of '()' comment. Resume line allowed.
|
|
if (line_flags & LINE_FLAG_COMMENT_PARENTHESES) { line_flags &= ~(LINE_FLAG_COMMENT_PARENTHESES); }
|
|
}
|
|
} else {
|
|
if (c <= ' ') {
|
|
// Throw away whitepace and control characters
|
|
} else if (c == '/') {
|
|
// Block delete NOT SUPPORTED. Ignore character.
|
|
// NOTE: If supported, would simply need to check the system if block delete is enabled.
|
|
} else if (c == '(') {
|
|
// Enable comments flag and ignore all characters until ')' or EOL.
|
|
// NOTE: This doesn't follow the NIST definition exactly, but is good enough for now.
|
|
// In the future, we could simply remove the items within the comments, but retain the
|
|
// comment control characters, so that the g-code parser can error-check it.
|
|
line_flags |= LINE_FLAG_COMMENT_PARENTHESES;
|
|
} else if (c == ';') {
|
|
// NOTE: ';' comment to EOL is a LinuxCNC definition. Not NIST.
|
|
line_flags |= LINE_FLAG_COMMENT_SEMICOLON;
|
|
// TODO: Install '%' feature
|
|
// } else if (c == '%') {
|
|
// Program start-end percent sign NOT SUPPORTED.
|
|
// NOTE: This maybe installed to tell Grbl when a program is running vs manual input,
|
|
// where, during a program, the system auto-cycle start will continue to execute
|
|
// everything until the next '%' sign. This will help fix resuming issues with certain
|
|
// functions that empty the planner buffer to execute its task on-time.
|
|
} else if (char_counter >= (LINE_BUFFER_SIZE-1)) {
|
|
// Detect line buffer overflow and set flag.
|
|
line_flags |= LINE_FLAG_OVERFLOW;
|
|
} else if (c >= 'a' && c <= 'z') { // Upcase lowercase
|
|
line[char_counter++] = c-'a'+'A';
|
|
} else {
|
|
line[char_counter++] = c;
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
// If there are no more characters in the serial read buffer to be processed and executed,
|
|
// this indicates that g-code streaming has either filled the planner buffer or has
|
|
// completed. In either case, auto-cycle start, if enabled, any queued moves.
|
|
protocol_auto_cycle_start();
|
|
|
|
protocol_execute_realtime(); // Runtime command check point.
|
|
if (sys.abort) { return; } // Bail to main() program loop to reset system.
|
|
|
|
}
|
|
|
|
return; /* Never reached */
|
|
}
|
|
|
|
|
|
// Block until all buffered steps are executed or in a cycle state. Works with feed hold
|
|
// during a synchronize call, if it should happen. Also, waits for clean cycle end.
|
|
void protocol_buffer_synchronize()
|
|
{
|
|
// If system is queued, ensure cycle resumes if the auto start flag is present.
|
|
protocol_auto_cycle_start();
|
|
do {
|
|
protocol_execute_realtime(); // Check and execute run-time commands
|
|
if (sys.abort) { return; } // Check for system abort
|
|
} while (plan_get_current_block() || (sys.state == STATE_CYCLE));
|
|
}
|
|
|
|
|
|
// Auto-cycle start has two purposes: 1. Resumes a plan_synchronize() call from a function that
|
|
// requires the planner buffer to empty (spindle enable, dwell, etc.) 2. As a user setting that
|
|
// automatically begins the cycle when a user enters a valid motion command manually. This is
|
|
// intended as a beginners feature to help new users to understand g-code. It can be disabled
|
|
// as a beginner tool, but (1.) still operates. If disabled, the operation of cycle start is
|
|
// manually issuing a cycle start command whenever the user is ready and there is a valid motion
|
|
// command in the planner queue.
|
|
// NOTE: This function is called from the main loop, buffer sync, and mc_line() only and executes
|
|
// when one of these conditions exist respectively: There are no more blocks sent (i.e. streaming
|
|
// is finished, single commands), a command that needs to wait for the motions in the buffer to
|
|
// execute calls a buffer sync, or the planner buffer is full and ready to go.
|
|
void protocol_auto_cycle_start() { bit_true_atomic(sys_rt_exec_state, EXEC_CYCLE_START); }
|
|
|
|
|
|
// This function is the general interface to Grbl's real-time command execution system. It is called
|
|
// from various check points in the main program, primarily where there may be a while loop waiting
|
|
// for a buffer to clear space or any point where the execution time from the last check point may
|
|
// be more than a fraction of a second. This is a way to execute realtime commands asynchronously
|
|
// (aka multitasking) with grbl's g-code parsing and planning functions. This function also serves
|
|
// as an interface for the interrupts to set the system realtime flags, where only the main program
|
|
// handles them, removing the need to define more computationally-expensive volatile variables. This
|
|
// also provides a controlled way to execute certain tasks without having two or more instances of
|
|
// the same task, such as the planner recalculating the buffer upon a feedhold or overrides.
|
|
// NOTE: The sys_rt_exec_state variable flags are set by any process, step or serial interrupts, pinouts,
|
|
// limit switches, or the main program.
|
|
void protocol_execute_realtime()
|
|
{
|
|
protocol_exec_rt_system();
|
|
if (sys.suspend) { protocol_exec_rt_suspend(); }
|
|
}
|
|
|
|
|
|
// Executes run-time commands, when required. This function primarily operates as Grbl's state
|
|
// machine and controls the various real-time features Grbl has to offer.
|
|
// NOTE: Do not alter this unless you know exactly what you are doing!
|
|
void protocol_exec_rt_system()
|
|
{
|
|
uint8_t rt_exec; // Temp variable to avoid calling volatile multiple times.
|
|
rt_exec = sys_rt_exec_alarm; // Copy volatile sys_rt_exec_alarm.
|
|
if (rt_exec) { // Enter only if any bit flag is true
|
|
// System alarm. Everything has shutdown by something that has gone severely wrong. Report
|
|
// the source of the error to the user. If critical, Grbl disables by entering an infinite
|
|
// loop until system reset/abort.
|
|
sys.state = STATE_ALARM; // Set system alarm state
|
|
if (rt_exec & EXEC_ALARM_HARD_LIMIT) {
|
|
report_alarm_message(ALARM_HARD_LIMIT_ERROR);
|
|
} else if (rt_exec & EXEC_ALARM_SOFT_LIMIT) {
|
|
report_alarm_message(ALARM_SOFT_LIMIT_ERROR);
|
|
} else if (rt_exec & EXEC_ALARM_ABORT_CYCLE) {
|
|
report_alarm_message(ALARM_ABORT_CYCLE);
|
|
} else if (rt_exec & EXEC_ALARM_PROBE_FAIL) {
|
|
report_alarm_message(ALARM_PROBE_FAIL);
|
|
} else if (rt_exec & EXEC_ALARM_HOMING_FAIL) {
|
|
report_alarm_message(ALARM_HOMING_FAIL);
|
|
}
|
|
// Halt everything upon a critical event flag. Currently hard and soft limits flag this.
|
|
if (rt_exec & EXEC_CRITICAL_EVENT) {
|
|
report_feedback_message(MESSAGE_CRITICAL_EVENT);
|
|
bit_false_atomic(sys_rt_exec_state,EXEC_RESET); // Disable any existing reset
|
|
do {
|
|
// Block everything, except reset and status reports, until user issues reset or power
|
|
// cycles. Hard limits typically occur while unattended or not paying attention. Gives
|
|
// the user and a GUI time to do what is needed before resetting, like killing the
|
|
// incoming stream. The same could be said about soft limits. While the position is not
|
|
// lost, streaming could cause a serious crash if it continues afterwards.
|
|
|
|
// TODO: Allow status reports during a critical alarm. Still need to think about implications of this.
|
|
// if (sys_rt_exec_state & EXEC_STATUS_REPORT) {
|
|
// report_realtime_status();
|
|
// bit_false_atomic(sys_rt_exec_state,EXEC_STATUS_REPORT);
|
|
// }
|
|
|
|
} while (bit_isfalse(sys_rt_exec_state,EXEC_RESET));
|
|
}
|
|
bit_false_atomic(sys_rt_exec_alarm,0xFF); // Clear all alarm flags
|
|
}
|
|
|
|
rt_exec = sys_rt_exec_state; // Copy volatile sys_rt_exec_state.
|
|
if (rt_exec) {
|
|
|
|
// Execute system abort.
|
|
if (rt_exec & EXEC_RESET) {
|
|
sys.abort = true; // Only place this is set true.
|
|
return; // Nothing else to do but exit.
|
|
}
|
|
|
|
// Execute and serial print status
|
|
if (rt_exec & EXEC_STATUS_REPORT) {
|
|
report_realtime_status();
|
|
bit_false_atomic(sys_rt_exec_state,EXEC_STATUS_REPORT);
|
|
}
|
|
|
|
// NOTE: The math involved to calculate the hold should be low enough for most, if not all,
|
|
// operational scenarios. Once hold is initiated, the system enters a suspend state to block
|
|
// all main program processes until either reset or resumed.
|
|
if (rt_exec & (EXEC_MOTION_CANCEL | EXEC_FEED_HOLD | EXEC_SAFETY_DOOR)) {
|
|
|
|
// TODO: CHECK MODE? How to handle this? Likely nothing, since it only works when IDLE and then resets Grbl.
|
|
|
|
// State check for allowable states for hold methods.
|
|
if ((sys.state == STATE_IDLE) || (sys.state & (STATE_CYCLE | STATE_HOMING | STATE_MOTION_CANCEL | STATE_HOLD | STATE_SAFETY_DOOR))) {
|
|
|
|
// If in CYCLE state, all hold states immediately initiate a motion HOLD.
|
|
if (sys.state == STATE_CYCLE) {
|
|
st_update_plan_block_parameters(); // Notify stepper module to recompute for hold deceleration.
|
|
sys.step_control = STEP_CONTROL_EXECUTE_HOLD; // Initiate suspend state with active flag.
|
|
}
|
|
// If IDLE, Grbl is not in motion. Simply indicate suspend state and hold is complete.
|
|
if (sys.state == STATE_IDLE) {
|
|
sys.suspend = SUSPEND_HOLD_COMPLETE;
|
|
sys.step_control = STEP_CONTROL_END_MOTION;
|
|
}
|
|
|
|
// Execute and flag a motion cancel with deceleration and return to idle. Used primarily by probing cycle
|
|
// to halt and cancel the remainder of the motion.
|
|
if (rt_exec & EXEC_MOTION_CANCEL) {
|
|
// MOTION_CANCEL only occurs during a CYCLE, but a HOLD and SAFETY_DOOR may been initiated beforehand
|
|
// to hold the CYCLE. If so, only flag that motion cancel is complete.
|
|
if (sys.state == STATE_CYCLE) { sys.state = STATE_MOTION_CANCEL; }
|
|
// NOTE: Ensures the motion cancel is handled correctly if it is active during a HOLD or DOOR state.
|
|
sys.suspend |= SUSPEND_MOTION_CANCEL; // Indicate motion cancel when resuming.
|
|
}
|
|
|
|
// Execute a feed hold with deceleration, if required. Then, suspend system.
|
|
if (rt_exec & EXEC_FEED_HOLD) {
|
|
// Block SAFETY_DOOR state from prematurely changing back to HOLD, which should only
|
|
// occur if the safety door switch closes.
|
|
if (sys.state != STATE_SAFETY_DOOR) { sys.state = STATE_HOLD; }
|
|
}
|
|
|
|
// Execute a safety door stop with a feed hold and disable spindle/coolant.
|
|
// NOTE: Safety door differs from feed holds by stopping everything no matter state, disables powered
|
|
// devices (spindle/coolant), and blocks resuming until switch is re-engaged.
|
|
if (rt_exec & EXEC_SAFETY_DOOR) {
|
|
report_feedback_message(MESSAGE_SAFETY_DOOR_AJAR);
|
|
|
|
// Check if the safety re-opened during a restore parking motion only. Ignore if
|
|
// already retracting or parked.
|
|
if (sys.suspend & SUSPEND_SAFETY_DOOR_AJAR) {
|
|
if (sys.suspend & SUSPEND_INITIATE_RESTORE) { // Actively restoring
|
|
#ifdef PARKING_ENABLE
|
|
// Set hold and reset appropriate control flags to restart parking sequence.
|
|
if (sys.step_control & STEP_CONTROL_EXECUTE_PARK) {
|
|
st_update_plan_block_parameters(); // Notify stepper module to recompute for hold deceleration.
|
|
sys.step_control = (STEP_CONTROL_EXECUTE_HOLD | STEP_CONTROL_EXECUTE_PARK);
|
|
sys.suspend &= ~(SUSPEND_HOLD_COMPLETE);
|
|
} // else NO_MOTION is active.
|
|
#endif
|
|
sys.suspend &= ~(SUSPEND_RETRACT_COMPLETE | SUSPEND_INITIATE_RESTORE | SUSPEND_RESTORE_COMPLETE);
|
|
sys.suspend |= SUSPEND_RESTART_RETRACT;
|
|
}
|
|
}
|
|
|
|
// NOTE: This flag doesn't change when the door closes, unlike sys.state. Ensures any parking motions
|
|
// are executed if the door switch closes and the state returns to HOLD.
|
|
sys.suspend |= SUSPEND_SAFETY_DOOR_AJAR;
|
|
sys.state = STATE_SAFETY_DOOR;
|
|
}
|
|
|
|
}
|
|
|
|
bit_false_atomic(sys_rt_exec_state,(EXEC_MOTION_CANCEL | EXEC_FEED_HOLD | EXEC_SAFETY_DOOR));
|
|
}
|
|
|
|
// Execute a cycle start by starting the stepper interrupt to begin executing the blocks in queue.
|
|
if (rt_exec & EXEC_CYCLE_START) {
|
|
// Block if called at same time as the hold commands: feed hold, motion cancel, and safety door.
|
|
// Ensures auto-cycle-start doesn't resume a hold without an explicit user-input.
|
|
if (!(rt_exec & (EXEC_FEED_HOLD | EXEC_MOTION_CANCEL | EXEC_SAFETY_DOOR))) {
|
|
// Cycle start only when IDLE or when a hold is complete and ready to resume.
|
|
// NOTE: SAFETY_DOOR is implicitly blocked. It reverts to HOLD when the door is closed.
|
|
if ((sys.state == STATE_IDLE) || ((sys.state & (STATE_HOLD | STATE_MOTION_CANCEL)) && (sys.suspend & SUSPEND_HOLD_COMPLETE))) {
|
|
if (sys.suspend & SUSPEND_SAFETY_DOOR_AJAR) {
|
|
if (sys.suspend & SUSPEND_RETRACT_COMPLETE) {
|
|
if bit_isfalse(sys.suspend,SUSPEND_RESTORE_COMPLETE) {
|
|
// Flag to re-energize powered components and restore original position, if disabled by SAFETY_DOOR.
|
|
// NOTE: For a safety door to resume, the switch must be closed, as indicated by HOLD state, and
|
|
// the retraction execution is complete, which implies the initial feed hold is not active. To
|
|
// restore normal operation, the restore procedures must be initiated by the following flag. Once,
|
|
// they are complete, it will call CYCLE_START automatically to resume and exit the suspend.
|
|
sys.suspend |= SUSPEND_INITIATE_RESTORE;
|
|
} else {
|
|
bit_false(sys.suspend,SUSPEND_SAFETY_DOOR_AJAR);
|
|
}
|
|
}
|
|
}
|
|
if (!(sys.suspend & SUSPEND_SAFETY_DOOR_AJAR)) {
|
|
// Start cycle only if queued motions exist in planner buffer and the motion is not canceled.
|
|
sys.step_control = STEP_CONTROL_NORMAL_OP; // Restore step control to normal operation
|
|
if (plan_get_current_block() && bit_isfalse(sys.suspend,SUSPEND_MOTION_CANCEL)) {
|
|
sys.suspend = SUSPEND_DISABLE; // Break suspend state.
|
|
sys.state = STATE_CYCLE;
|
|
st_prep_buffer(); // Initialize step segment buffer before beginning cycle.
|
|
st_wake_up();
|
|
} else { // Otherwise, do nothing. Set and resume IDLE state.
|
|
sys.suspend = SUSPEND_DISABLE; // Break suspend state.
|
|
sys.state = STATE_IDLE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
bit_false_atomic(sys_rt_exec_state,EXEC_CYCLE_START);
|
|
}
|
|
|
|
if (rt_exec & EXEC_CYCLE_STOP) {
|
|
// Reinitializes the cycle plan and stepper system after a feed hold for a resume. Called by
|
|
// realtime command execution in the main program, ensuring that the planner re-plans safely.
|
|
// NOTE: Bresenham algorithm variables are still maintained through both the planner and stepper
|
|
// cycle reinitializations. The stepper path should continue exactly as if nothing has happened.
|
|
// NOTE: EXEC_CYCLE_STOP is set by the stepper subsystem when a cycle or feed hold completes.
|
|
if (sys.state & (STATE_HOLD | STATE_SAFETY_DOOR)) {
|
|
// Hold complete. Set to indicate ready to resume. Remain in HOLD or DOOR states until user
|
|
// has issued a resume command or reset.
|
|
plan_cycle_reinitialize();
|
|
if (sys.step_control & STEP_CONTROL_EXECUTE_HOLD) { sys.suspend |= SUSPEND_HOLD_COMPLETE; }
|
|
bit_false(sys.step_control,(STEP_CONTROL_EXECUTE_HOLD | STEP_CONTROL_EXECUTE_PARK));
|
|
} else { // Motion is complete. Includes CYCLE, HOMING, and MOTION_CANCEL states.
|
|
sys.suspend = SUSPEND_DISABLE;
|
|
sys.state = STATE_IDLE;
|
|
}
|
|
bit_false_atomic(sys_rt_exec_state,EXEC_CYCLE_STOP);
|
|
}
|
|
}
|
|
|
|
// Overrides flag byte (sys.override) and execution should be installed here, since they
|
|
// are realtime and require a direct and controlled interface to the main stepper program.
|
|
|
|
// Reload step segment buffer
|
|
if (sys.state & (STATE_CYCLE | STATE_HOLD | STATE_MOTION_CANCEL | STATE_SAFETY_DOOR | STATE_HOMING)) {
|
|
st_prep_buffer();
|
|
}
|
|
|
|
}
|
|
|
|
|
|
// Handles Grbl system suspend procedures, such as feed hold, safety door, and parking motion.
|
|
// The system will enter this loop, create local variables for suspend tasks, and return to
|
|
// whatever function that invoked the suspend, such that Grbl resumes normal operation.
|
|
// This function is written in a way to promote custom parking motions. Simply use this as a
|
|
// template
|
|
static void protocol_exec_rt_suspend()
|
|
{
|
|
#ifdef PARKING_ENABLE
|
|
// Declare parking local variables
|
|
float restore_target[N_AXIS];
|
|
float parking_target[N_AXIS];
|
|
float retract_waypoint = PARKING_PULLOUT_INCREMENT;
|
|
#endif
|
|
|
|
while (sys.suspend) {
|
|
|
|
if (sys.abort) { return; }
|
|
|
|
// Safety door manager. Handles de/re-energizing, switch state checks, and parking motions.
|
|
if ((sys.suspend & SUSPEND_SAFETY_DOOR_AJAR) && (sys.suspend & SUSPEND_HOLD_COMPLETE)) {
|
|
|
|
// Handles retraction motions and de-energizing.
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RETRACT_COMPLETE)) {
|
|
|
|
#ifndef PARKING_ENABLE
|
|
|
|
spindle_stop(); // De-energize
|
|
coolant_stop(); // De-energize
|
|
|
|
#else
|
|
|
|
// Get current position and store restore location and spindle retract waypoint.
|
|
system_convert_array_steps_to_mpos(parking_target,sys.position);
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RESTART_RETRACT)) {
|
|
memcpy(restore_target,parking_target,sizeof(parking_target));
|
|
retract_waypoint += restore_target[PARKING_AXIS];
|
|
retract_waypoint = min(retract_waypoint,PARKING_TARGET);
|
|
}
|
|
|
|
// Execute slow pull-out parking retract motion. Parking requires homing enabled and
|
|
// the current location not exceeding the parking target location.
|
|
// NOTE: State is will remain DOOR, until the de-energizing and retract is complete.
|
|
if ((bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE)) &&
|
|
(parking_target[PARKING_AXIS] < PARKING_TARGET)) {
|
|
|
|
// Retract spindle by pullout distance. Ensure retraction motion moves away from
|
|
// the workpiece and waypoint motion doesn't exceed the parking target location.
|
|
if (parking_target[PARKING_AXIS] < retract_waypoint) {
|
|
parking_target[PARKING_AXIS] = retract_waypoint;
|
|
mc_parking_motion(parking_target, PARKING_PULLOUT_RATE);
|
|
}
|
|
|
|
spindle_stop(); // De-energize
|
|
coolant_stop(); // De-energize
|
|
|
|
// Execute fast parking retract motion to parking target location.
|
|
if (parking_target[PARKING_AXIS] < PARKING_TARGET) {
|
|
parking_target[PARKING_AXIS] = PARKING_TARGET;
|
|
mc_parking_motion(parking_target, PARKING_RATE);
|
|
}
|
|
|
|
} else {
|
|
|
|
// Parking motion not possible. Just disable the spindle and coolant.
|
|
spindle_stop(); // De-energize
|
|
coolant_stop(); // De-energize
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
sys.suspend &= ~(SUSPEND_RESTART_RETRACT);
|
|
sys.suspend |= SUSPEND_RETRACT_COMPLETE;
|
|
|
|
} else {
|
|
|
|
// Allows resuming from parking/safety door. Actively checks if safety door is closed and ready to resume.
|
|
// NOTE: This unlocks the SAFETY_DOOR state to a HOLD state, such that CYCLE_START can activate a resume.
|
|
if (sys.state == STATE_SAFETY_DOOR) {
|
|
if (!(system_check_safety_door_ajar())) {
|
|
sys.state = STATE_HOLD; // Update to HOLD state to indicate door is closed and ready to resume.
|
|
}
|
|
}
|
|
|
|
// Handles parking restore and safety door resume.
|
|
if (sys.suspend & SUSPEND_INITIATE_RESTORE) {
|
|
|
|
#ifdef PARKING_ENABLE
|
|
// Execute fast restore motion to the pull-out position. Parking requires homing enabled.
|
|
// NOTE: State is will remain DOOR, until the de-energizing and retract is complete.
|
|
if (bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE)) {
|
|
// Check to ensure the motion doesn't move below pull-out position.
|
|
if (parking_target[PARKING_AXIS] <= PARKING_TARGET) {
|
|
parking_target[PARKING_AXIS] = retract_waypoint;
|
|
mc_parking_motion(parking_target, PARKING_RATE);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
// Delayed Tasks: Restart spindle and coolant, delay to power-up, then resume cycle.
|
|
if (gc_state.modal.spindle != SPINDLE_DISABLE) {
|
|
// Block if safety door re-opened during prior restore actions.
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RESTART_RETRACT)) {
|
|
spindle_set_state(gc_state.modal.spindle, gc_state.spindle_speed);
|
|
delay_sec(SAFETY_DOOR_SPINDLE_DELAY, DELAY_MODE_SAFETY_DOOR);
|
|
}
|
|
}
|
|
if (gc_state.modal.coolant != COOLANT_DISABLE) {
|
|
// Block if safety door re-opened during prior restore actions.
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RESTART_RETRACT)) {
|
|
coolant_set_state(gc_state.modal.coolant);
|
|
delay_sec(SAFETY_DOOR_COOLANT_DELAY, DELAY_MODE_SAFETY_DOOR);
|
|
}
|
|
}
|
|
|
|
#ifdef PARKING_ENABLE
|
|
// Execute slow plunge motion from pull-out position to resume position.
|
|
if (bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE)) {
|
|
// Block if safety door re-opened during prior restore actions.
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RESTART_RETRACT)) {
|
|
// Regardless if the retract parking motion was a valid/safe motion or not, the
|
|
// restore parking motion should logically be valid, either by returning to the
|
|
// original position through valid machine space or by not moving at all.
|
|
mc_parking_motion(restore_target, PARKING_PULLOUT_RATE);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (bit_isfalse(sys.suspend,SUSPEND_RESTART_RETRACT)) {
|
|
sys.suspend |= SUSPEND_RESTORE_COMPLETE;
|
|
bit_true_atomic(sys_rt_exec_state,EXEC_CYCLE_START); // Set to resume program.
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
|
|
protocol_exec_rt_system();
|
|
}
|
|
}
|