9be7b3d930
- Rudimentary CoreXY kinematics support. Didn’t test, but homing and feed holds should work. See config.h. Please report successes and issues as we find bugs. - G40 (disable cutter comp) is now “supported”. Meaning that Grbl will no longer issue an error when typically sent in g-code program header. - Refactored coolant and spindle state setting into separate functions for future features. - Configuration option for fixing homing behavior when there are two limit switches on the same axis sharing an input pin. - Created a new “grbl.h” that will eventually be used as the main include file for Grbl. Also will help simply uploading through the Arduino IDE - Separated out the alarms execution flags from the realtime (used be called runtime) execution flag variable. Now reports exactly what caused the alarm. Expandable for new alarms later on. - Refactored the homing cycle to support CoreXY. - Applied @EliteEng updates to Mega2560 support. Some pins were reconfigured. - Created a central step to position and vice versa function. Needed for non-traditional cartesian machines. Should make it easier later. - Removed the new CPU map for the Uno. No longer going to used. There will be only one configuration to keep things uniform.
68 lines
1.6 KiB
C
68 lines
1.6 KiB
C
/*
|
|
coolant_control.c - coolant control methods
|
|
Part of Grbl v0.9
|
|
|
|
Copyright (c) 2012-2015 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "system.h"
|
|
#include "coolant_control.h"
|
|
#include "protocol.h"
|
|
#include "gcode.h"
|
|
|
|
|
|
void coolant_init()
|
|
{
|
|
COOLANT_FLOOD_DDR |= (1 << COOLANT_FLOOD_BIT);
|
|
#ifdef ENABLE_M7
|
|
COOLANT_MIST_DDR |= (1 << COOLANT_MIST_BIT);
|
|
#endif
|
|
coolant_stop();
|
|
}
|
|
|
|
|
|
void coolant_stop()
|
|
{
|
|
COOLANT_FLOOD_PORT &= ~(1 << COOLANT_FLOOD_BIT);
|
|
#ifdef ENABLE_M7
|
|
COOLANT_MIST_PORT &= ~(1 << COOLANT_MIST_BIT);
|
|
#endif
|
|
}
|
|
|
|
|
|
void coolant_set_state(uint8_t mode)
|
|
{
|
|
if (mode == COOLANT_FLOOD_ENABLE) {
|
|
COOLANT_FLOOD_PORT |= (1 << COOLANT_FLOOD_BIT);
|
|
|
|
#ifdef ENABLE_M7
|
|
} else if (mode == COOLANT_MIST_ENABLE) {
|
|
COOLANT_MIST_PORT |= (1 << COOLANT_MIST_BIT);
|
|
#endif
|
|
|
|
} else {
|
|
coolant_stop();
|
|
}
|
|
}
|
|
|
|
|
|
void coolant_run(uint8_t mode)
|
|
{
|
|
if (sys.state == STATE_CHECK_MODE) { return; }
|
|
protocol_buffer_synchronize(); // Ensure coolant turns on when specified in program.
|
|
coolant_set_state(mode);
|
|
}
|