27 lines
1.2 KiB
Plaintext
27 lines
1.2 KiB
Plaintext
Grbl - An embedded rs274/ngc (g-code) interpreter, CNC controller, readout and exerciser for the AVR series of microcontrollers.
|
|
Inspired by the Arduino GCode Interpreter by Mike Ellery
|
|
|
|
Status:
|
|
* Linear interpolation machine control complete (Arc support in embryonic state)
|
|
* Buffered, non blocking, asynchronous stepping so the rest of the system is free to generate new steps and parse
|
|
g-code while the steppers are still steppin'
|
|
* GCode interpreter complete
|
|
* Basic serial protocol complete
|
|
* As of yet completely untested in a real environemnt. Still waiting for my micRo kit from Lumenlab.com
|
|
|
|
Goals:
|
|
* Runs on the atmega168
|
|
* Runs on a standard Arduino
|
|
* Suitable for both milling and deposition fabrication (e.g. RepRap)
|
|
* Support GCode from common free and cheap CAM-packages right out of the box
|
|
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
|
|
* Optional support for automated cutter length calibration when milling
|
|
* Support "headless" fabrication by buffering all code to SD-card or similar
|
|
|
|
Limitations:
|
|
* Limited GCode-support. Focus on the kind of GCode produced by CAM tools. Leave human GCoders frustrated.
|
|
* No rotation axes, only x, y and z.
|
|
|
|
|
|
|