d21e06a201
- Increment to v1.1b due to status report tweak. - Tweaked the buffer state status reports to show bytes and blocks available, rather than in use. This does not require knowing the buffer sizes beforehand. It’s implicit. - Also, since buffer states are not used by most devs (after inquiries), it is no longer enabled by default and a status mask option was added for this. - Fixed some typos and updated for the report tweak in the documentation. - Wrote a joystick implementation concept in the jogging markdown document. Outlines how to get a low-latency feel to a joystick (and other input devices). - Removed XON/XOFF support. It’s not used by anyone because of its inherent problems. Remains in older versions for reference. - Added a compile option on how to handle the probe position during a check mode. - Fixed a jogging bug. If G93 is the modal state before a jogging motion, the feed rate did not get calculated correctly. Fixed the issue. - Refactored some code to save another 160+ bytes. Included an improved float vector comparison macro and reducing a few large and repetitive function calls. - Fixed a probing bug (existing in v0.9 too) where the target positions were not set correct and error handling was improper.
88 lines
3.0 KiB
C
88 lines
3.0 KiB
C
/*
|
|
nuts_bolts.h - Header file for shared definitions, variables, and functions
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2011-2016 Sungeun K. Jeon for Gnea Research LLC
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef nuts_bolts_h
|
|
#define nuts_bolts_h
|
|
|
|
#define false 0
|
|
#define true 1
|
|
|
|
#define SOME_LARGE_VALUE 1.0E+38
|
|
|
|
// Axis array index values. Must start with 0 and be continuous.
|
|
#define N_AXIS 3 // Number of axes
|
|
#define X_AXIS 0 // Axis indexing value.
|
|
#define Y_AXIS 1
|
|
#define Z_AXIS 2
|
|
// #define A_AXIS 3
|
|
|
|
// CoreXY motor assignments. DO NOT ALTER.
|
|
// NOTE: If the A and B motor axis bindings are changed, this effects the CoreXY equations.
|
|
#ifdef COREXY
|
|
#define A_MOTOR X_AXIS // Must be X_AXIS
|
|
#define B_MOTOR Y_AXIS // Must be Y_AXIS
|
|
#endif
|
|
|
|
// Conversions
|
|
#define MM_PER_INCH (25.40)
|
|
#define INCH_PER_MM (0.0393701)
|
|
#define TICKS_PER_MICROSECOND (F_CPU/1000000)
|
|
|
|
#define DELAY_MODE_DWELL 0
|
|
#define DELAY_MODE_SYS_SUSPEND 1
|
|
|
|
// Useful macros
|
|
#define clear_vector(a) memset(a, 0, sizeof(a))
|
|
#define clear_vector_float(a) memset(a, 0.0, sizeof(float)*N_AXIS)
|
|
// #define clear_vector_long(a) memset(a, 0.0, sizeof(long)*N_AXIS)
|
|
#define max(a,b) (((a) > (b)) ? (a) : (b))
|
|
#define min(a,b) (((a) < (b)) ? (a) : (b))
|
|
#define isequal_position_vector(a,b) !(memcmp(a, b, sizeof(float)*N_AXIS))
|
|
|
|
// Bit field and masking macros
|
|
#define bit(n) (1 << n)
|
|
#define bit_true(x,mask) (x) |= (mask)
|
|
#define bit_false(x,mask) (x) &= ~(mask)
|
|
#define bit_istrue(x,mask) ((x & mask) != 0)
|
|
#define bit_isfalse(x,mask) ((x & mask) == 0)
|
|
|
|
// Read a floating point value from a string. Line points to the input buffer, char_counter
|
|
// is the indexer pointing to the current character of the line, while float_ptr is
|
|
// a pointer to the result variable. Returns true when it succeeds
|
|
uint8_t read_float(char *line, uint8_t *char_counter, float *float_ptr);
|
|
|
|
// Non-blocking delay function used for general operation and suspend features.
|
|
void delay_sec(float seconds, uint8_t mode);
|
|
|
|
// Delays variable-defined milliseconds. Compiler compatibility fix for _delay_ms().
|
|
void delay_ms(uint16_t ms);
|
|
|
|
// Delays variable-defined microseconds. Compiler compatibility fix for _delay_us().
|
|
void delay_us(uint32_t us);
|
|
|
|
// Computes hypotenuse, avoiding avr-gcc's bloated version and the extra error checking.
|
|
float hypot_f(float x, float y);
|
|
|
|
float convert_delta_vector_to_unit_vector(float *vector);
|
|
float limit_value_by_axis_maximum(float *max_value, float *unit_vec);
|
|
|
|
#endif
|