6e3fb6bd13
- NOTE: This commit has largely been untested. - Constant laser power per rate mode has been improved. Altered its implementation to be more responsive and accurate. - Based on LaserWeb dev feedback, only G1, G2, and G3 moves operate with constant laser power mode. Meaning that G0, G38.x, and $J jogging motions operate without it and will keep a constant power output. This was specifically requested as a way to focus the laser by keeping the laser on when not moving. Operationally, this shouldn’t alter how the laser mode operates. - Re-factored parts of the g-code parser and g-code state reports to save a few hundred bytes of flash. What was done makes the code a bit more unreadable (bad), but the flash space was in dire need. So, I’m willing to live with it for now. - Fixed a problem with $G g-code state reports. Showed `M0` program pause during a run state. Now fixed to show nothing during a run state. Also, `M30` program end was shown as `M2`. This was also corrected. - Improved spindle stop override responsiveness by removing the enforced spindle restoring delay. It’s not needed for a feature that is user controlled. - Fixed a bug with G2/3 arcs in inverse time mode. - Updated the interface.md document to make it more clear how WPos: or MPos: can be calculated from WCO:. Some GUI devs have failed to catch this in the documentation. |
||
|---|---|---|
| .. | ||
| csv | ||
| log | ||
| markdown | ||
| media | ||
| script | ||