72 lines
2.1 KiB
C
72 lines
2.1 KiB
C
/*
|
|
config.h - configuration data for Grbl
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef config_h
|
|
#define config_h
|
|
|
|
#define VERSION "0.1"
|
|
|
|
#define X_STEPS_PER_MM 100.0
|
|
#define Y_STEPS_PER_MM 100.0
|
|
#define Z_STEPS_PER_MM 100.0
|
|
|
|
#define INCHES_PER_MM 25.4
|
|
#define X_STEPS_PER_INCH X_STEPS_PER_MM*INCHES_PER_MM
|
|
#define Y_STEPS_PER_INCH Y_STEPS_PER_MM*INCHES_PER_MM
|
|
#define Z_STEPS_PER_INCH Z_STEPS_PER_MM*INCHES_PER_MM
|
|
|
|
#define RAPID_FEEDRATE 1270.0 // in millimeters per minute
|
|
#define DEFAULT_FEEDRATE 635.0
|
|
|
|
#define STEPPERS_ENABLE_DDR DDRB
|
|
#define STEPPERS_ENABLE_PORT PORTB
|
|
#define STEPPERS_ENABLE_BIT 6
|
|
|
|
#define MOTORS_DDR DDRB
|
|
#define MOTORS_PORT PORTB
|
|
#define X_STEP_BIT 0
|
|
#define Y_STEP_BIT 2
|
|
#define Z_STEP_BIT 4
|
|
#define X_DIRECTION_BIT 1
|
|
#define Y_DIRECTION_BIT 3
|
|
#define Z_DIRECTION_BIT 5
|
|
#define STEP_MASK (1<<X_STEP_BIT)|(1<<Y_STEP_BIT)|(1<<Z_STEP_BIT)
|
|
#define DIRECTION_MASK (1<<X_DIRECTION_BIT)|(1<<Y_DIRECTION_BIT)|(1<<Z_DIRECTION_BIT)
|
|
#define MOTORS_MASK STEP_MASK | DIRECTION_MASK
|
|
|
|
#define LIMIT_DDR DDRC
|
|
#define LIMIT_PORT PORTC
|
|
#define X_LIMIT_BIT 0
|
|
#define Y_LIMIT_BIT 1
|
|
#define Z_LIMIT_BIT 2
|
|
#define LIMIT_MASK (1<<X_LIMIT_BIT)|(1<<Y_LIMIT_BIT)|(1<<Z_LIMIT_BIT)
|
|
|
|
#define SPINDLE_ENABLE_DDR DDRC
|
|
#define SPINDLE_ENABLE_PORT PORTC
|
|
#define SPINDLE_ENABLE_BIT 3
|
|
|
|
#define SPINDLE_DIRECTION_DDR DDRC
|
|
#define SPINDLE_DIRECTION_PORT PORTC
|
|
#define SPINDLE_DIRECTION_BIT 4
|
|
|
|
#define BAUD_RATE 14400
|
|
|
|
#endif
|