grbl-LPC-CoreXY/print.c
Sonny Jeon 4c711a4af7 New startup script setting. New dry run, check gcode switches. New system state variable. Lots of reorganizing.
(All v0.8 features installed. Still likely buggy, but now thourough
testing will need to start to squash them all. As soon as we're done,
this will be pushed to master and v0.9 development will be started.
Please report ANY issues to us so we can get this rolled out ASAP.)

- User startup script! A user can now save one (up to 5 as compile-time
option) block of g-code in EEPROM memory. This will be run everytime
Grbl resets. Mainly to be used as a way to set your preferences, like
G21, G54, etc.

- New dry run and check g-code switches. Dry run moves ALL motions at
rapids rate ignoring spindle, coolant, and dwell commands. For rapid
physical proofing of your code. The check g-code switch ignores all
motion and provides the user a way to check if there are any errors in
their program that Grbl may not like.

- Program restart! (sort of). Program restart is typically an advanced
feature that allows users to restart a program mid-stream. The check
g-code switch can perform this feature by enabling the switch at the
start of the program, and disabling it at the desired point with some
minimal changes.

- New system state variable. This state variable tracks all of the
different state processes that Grbl performs, i.e. cycle start, feed
hold, homing, etc. This is mainly for making managing of these task
easier and more clear.

- Position lost state variable. Only when homing is enabled, Grbl will
refuse to move until homing is completed and position is known. This is
mainly for safety. Otherwise, it will let users fend for themselves.

- Moved the default settings defines into config.h. The plan is to
eventually create a set of config.h's for particular as-built machines
to help users from doing it themselves.

- Moved around misc defines into .h files. And lots of other little
things.
2012-11-03 11:32:23 -06:00

150 lines
3.6 KiB
C
Executable File

/*
print.c - Functions for formatting output strings
Part of Grbl
Copyright (c) 2009-2011 Simen Svale Skogsrud
Copyright (c) 2011-2012 Sungeun K. Jeon
Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/
/* This code was initially inspired by the wiring_serial module by David A. Mellis which
used to be a part of the Arduino project. */
#include <avr/pgmspace.h>
#include "config.h"
#include "serial.h"
#include "settings.h"
void printString(const char *s)
{
while (*s)
serial_write(*s++);
}
// Print a string stored in PGM-memory
void printPgmString(const char *s)
{
char c;
while ((c = pgm_read_byte_near(s++)))
serial_write(c);
}
// void printIntegerInBase(unsigned long n, unsigned long base)
// {
// unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars.
// unsigned long i = 0;
//
// if (n == 0) {
// serial_write('0');
// return;
// }
//
// while (n > 0) {
// buf[i++] = n % base;
// n /= base;
// }
//
// for (; i > 0; i--)
// serial_write(buf[i - 1] < 10 ?
// '0' + buf[i - 1] :
// 'A' + buf[i - 1] - 10);
// }
void print_uint8_base2(uint8_t n)
{
unsigned char buf[8];
uint8_t i = 0;
for (; i < 8; i++) {
buf[i] = n & 1;
n >>= 1;
}
for (; i > 0; i--)
serial_write('0' + buf[i - 1]);
}
static void print_uint32_base10(unsigned long n)
{
unsigned char buf[10];
uint8_t i = 0;
if (n == 0) {
serial_write('0');
return;
}
while (n > 0) {
buf[i++] = n % 10 + '0';
n /= 10;
}
for (; i > 0; i--)
serial_write(buf[i-1]);
}
void printInteger(long n)
{
if (n < 0) {
serial_write('-');
n = -n;
}
print_uint32_base10(n);
}
// Convert float to string by immediately converting to a long integer, which contains
// more digits than a float. Number of decimal places, which are tracked by a counter,
// may be set by the user. The integer is then efficiently converted to a string.
// NOTE: AVR '%' and '/' integer operations are very efficient. Bitshifting speed-up
// techniques are actually just slightly slower. Found this out the hard way.
void printFloat(float n)
{
if (n < 0) {
serial_write('-');
n = -n;
}
uint8_t decimals = settings.decimal_places;
while (decimals >= 2) { // Quickly convert values expected to be E0 to E-4.
n *= 100;
decimals -= 2;
}
if (decimals) { n *= 10; }
n += 0.5; // Add rounding factor. Ensures carryover through entire value.
// Generate digits backwards and store in string.
unsigned char buf[10];
uint8_t i = 0;
uint32_t a = (long)n;
buf[settings.decimal_places] = '.'; // Place decimal point, even if decimal places are zero.
while(a > 0) {
if (i == settings.decimal_places) { i++; } // Skip decimal point location
buf[i++] = (a % 10) + '0'; // Get digit
a /= 10;
}
while (i < settings.decimal_places) {
buf[i++] = '0'; // Fill in zeros to decimal point for (n < 1)
}
if (i == settings.decimal_places) { // Fill in leading zero, if needed.
i++;
buf[i++] = '0';
}
// Print the generated string.
for (; i > 0; i--)
serial_write(buf[i-1]);
}