3dfffa622d
- Arc mm_per_segment parameter was removed and replaced with an arc_tolerance parameter, which scales all arc segments automatically to radius, such that the line segment error doesn't exceed the tolerance. Significantly improves arc performance through larger radius arc, because the segments are much longer and the planner buffer has more to work with. - Moved n_arc correction from the settings to config.h. Mathematically this doesn't need to be a setting anymore, as the default config value will work for all known CNC applications. The error does not accumulate as much anymore, since the small angle approximation used by the arc generation has been updated to a third-order approximation and how the line segment length scale with radius and tolerance now. Left in config.h for extraneous circumstances. - Corrected the st.ramp_count variable (acceleration tick counter) to a 8-bit vs. 32-bit variable. Should make the stepper algorithm just a touch faster overall.
227 lines
8.6 KiB
C
227 lines
8.6 KiB
C
/*
|
|
settings.c - eeprom configuration handling
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2011-2012 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <avr/io.h>
|
|
#include "protocol.h"
|
|
#include "report.h"
|
|
#include "stepper.h"
|
|
#include "nuts_bolts.h"
|
|
#include "settings.h"
|
|
#include "eeprom.h"
|
|
#include "limits.h"
|
|
|
|
settings_t settings;
|
|
|
|
// Version 4 outdated settings record
|
|
typedef struct {
|
|
float steps_per_mm[3];
|
|
uint8_t microsteps;
|
|
uint8_t pulse_microseconds;
|
|
float default_feed_rate;
|
|
uint8_t invert_mask;
|
|
float mm_per_arc_segment;
|
|
float acceleration;
|
|
float junction_deviation;
|
|
} settings_v4_t;
|
|
|
|
|
|
// Method to store startup lines into EEPROM
|
|
void settings_store_startup_line(uint8_t n, char *line)
|
|
{
|
|
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
|
memcpy_to_eeprom_with_checksum(addr,(char*)line, LINE_BUFFER_SIZE);
|
|
}
|
|
|
|
// Method to store coord data parameters into EEPROM
|
|
void settings_write_coord_data(uint8_t coord_select, float *coord_data)
|
|
{
|
|
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
|
memcpy_to_eeprom_with_checksum(addr,(char*)coord_data, sizeof(float)*N_AXIS);
|
|
}
|
|
|
|
// Method to store Grbl global settings struct and version number into EEPROM
|
|
void write_global_settings()
|
|
{
|
|
eeprom_put_char(0, SETTINGS_VERSION);
|
|
memcpy_to_eeprom_with_checksum(EEPROM_ADDR_GLOBAL, (char*)&settings, sizeof(settings_t));
|
|
}
|
|
|
|
// Method to reset Grbl global settings back to defaults.
|
|
void settings_reset(bool reset_all) {
|
|
// Reset all settings or only the migration settings to the new version.
|
|
if (reset_all) {
|
|
settings.steps_per_mm[X_AXIS] = DEFAULT_X_STEPS_PER_MM;
|
|
settings.steps_per_mm[Y_AXIS] = DEFAULT_Y_STEPS_PER_MM;
|
|
settings.steps_per_mm[Z_AXIS] = DEFAULT_Z_STEPS_PER_MM;
|
|
settings.pulse_microseconds = DEFAULT_STEP_PULSE_MICROSECONDS;
|
|
settings.default_feed_rate = DEFAULT_FEEDRATE;
|
|
settings.max_velocity[X_AXIS] = DEFAULT_RAPID_FEEDRATE;
|
|
settings.max_velocity[Y_AXIS] = DEFAULT_RAPID_FEEDRATE;
|
|
settings.max_velocity[Z_AXIS] = DEFAULT_RAPID_FEEDRATE;
|
|
settings.acceleration[X_AXIS] = DEFAULT_ACCELERATION;
|
|
settings.acceleration[Y_AXIS] = DEFAULT_ACCELERATION;
|
|
settings.acceleration[Z_AXIS] = DEFAULT_ACCELERATION;
|
|
settings.arc_tolerance = DEFAULT_ARC_TOLERANCE;
|
|
settings.invert_mask = DEFAULT_STEPPING_INVERT_MASK;
|
|
settings.junction_deviation = DEFAULT_JUNCTION_DEVIATION;
|
|
}
|
|
// New settings since last version
|
|
settings.flags = 0;
|
|
if (DEFAULT_REPORT_INCHES) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
|
if (DEFAULT_AUTO_START) { settings.flags |= BITFLAG_AUTO_START; }
|
|
if (DEFAULT_INVERT_ST_ENABLE) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
|
if (DEFAULT_HARD_LIMIT_ENABLE) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
|
if (DEFAULT_HOMING_ENABLE) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
|
settings.homing_dir_mask = DEFAULT_HOMING_DIR_MASK;
|
|
settings.homing_feed_rate = DEFAULT_HOMING_FEEDRATE;
|
|
settings.homing_seek_rate = DEFAULT_HOMING_RAPID_FEEDRATE;
|
|
settings.homing_debounce_delay = DEFAULT_HOMING_DEBOUNCE_DELAY;
|
|
settings.homing_pulloff = DEFAULT_HOMING_PULLOFF;
|
|
settings.stepper_idle_lock_time = DEFAULT_STEPPER_IDLE_LOCK_TIME;
|
|
settings.decimal_places = DEFAULT_DECIMAL_PLACES;
|
|
write_global_settings();
|
|
}
|
|
|
|
// Reads startup line from EEPROM. Updated pointed line string data.
|
|
uint8_t settings_read_startup_line(uint8_t n, char *line)
|
|
{
|
|
uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)line, addr, LINE_BUFFER_SIZE))) {
|
|
// Reset line with default value
|
|
line[0] = 0;
|
|
settings_store_startup_line(n, line);
|
|
return(false);
|
|
} else {
|
|
return(true);
|
|
}
|
|
}
|
|
|
|
// Read selected coordinate data from EEPROM. Updates pointed coord_data value.
|
|
uint8_t settings_read_coord_data(uint8_t coord_select, float *coord_data)
|
|
{
|
|
uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)coord_data, addr, sizeof(float)*N_AXIS))) {
|
|
// Reset with default zero vector
|
|
clear_vector_float(coord_data);
|
|
settings_write_coord_data(coord_select,coord_data);
|
|
return(false);
|
|
} else {
|
|
return(true);
|
|
}
|
|
}
|
|
|
|
// Reads Grbl global settings struct from EEPROM.
|
|
uint8_t read_global_settings() {
|
|
// Check version-byte of eeprom
|
|
uint8_t version = eeprom_get_char(0);
|
|
|
|
if (version == SETTINGS_VERSION) {
|
|
// Read settings-record and check checksum
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, EEPROM_ADDR_GLOBAL, sizeof(settings_t)))) {
|
|
return(false);
|
|
}
|
|
} else {
|
|
if (version <= 4) {
|
|
// Migrate from settings version 4 to current version.
|
|
if (!(memcpy_from_eeprom_with_checksum((char*)&settings, 1, sizeof(settings_v4_t)))) {
|
|
return(false);
|
|
}
|
|
settings_reset(false); // Old settings ok. Write new settings only.
|
|
} else {
|
|
return(false);
|
|
}
|
|
}
|
|
return(true);
|
|
}
|
|
|
|
|
|
// A helper method to set settings from command line
|
|
uint8_t settings_store_global_setting(int parameter, float value) {
|
|
switch(parameter) {
|
|
case 0: case 1: case 2:
|
|
if (value <= 0.0) { return(STATUS_SETTING_VALUE_NEG); }
|
|
settings.steps_per_mm[parameter] = value; break;
|
|
case 3: settings.max_velocity[X_AXIS] = value; break;
|
|
case 4: settings.max_velocity[Y_AXIS] = value; break;
|
|
case 5: settings.max_velocity[Z_AXIS] = value; break;
|
|
case 6: settings.acceleration[X_AXIS] = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
|
case 7: settings.acceleration[Y_AXIS] = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
|
case 8: settings.acceleration[Z_AXIS] = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
|
|
case 9:
|
|
if (value < 3) { return(STATUS_SETTING_STEP_PULSE_MIN); }
|
|
settings.pulse_microseconds = round(value); break;
|
|
case 10: settings.default_feed_rate = value; break;
|
|
case 11: settings.invert_mask = trunc(value); break;
|
|
case 12: settings.stepper_idle_lock_time = round(value); break;
|
|
case 13: settings.junction_deviation = fabs(value); break;
|
|
case 14: settings.arc_tolerance = value; break;
|
|
case 15: settings.decimal_places = round(value); break;
|
|
case 16:
|
|
if (value) { settings.flags |= BITFLAG_REPORT_INCHES; }
|
|
else { settings.flags &= ~BITFLAG_REPORT_INCHES; }
|
|
break;
|
|
case 17: // Reset to ensure change. Immediate re-init may cause problems.
|
|
if (value) { settings.flags |= BITFLAG_AUTO_START; }
|
|
else { settings.flags &= ~BITFLAG_AUTO_START; }
|
|
break;
|
|
case 18: // Reset to ensure change. Immediate re-init may cause problems.
|
|
if (value) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
|
|
else { settings.flags &= ~BITFLAG_INVERT_ST_ENABLE; }
|
|
break;
|
|
case 19:
|
|
if (value) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
|
|
else { settings.flags &= ~BITFLAG_HARD_LIMIT_ENABLE; }
|
|
limits_init(); // Re-init to immediately change. NOTE: Nice to have but could be problematic later.
|
|
break;
|
|
case 20:
|
|
if (value) { settings.flags |= BITFLAG_HOMING_ENABLE; }
|
|
else { settings.flags &= ~BITFLAG_HOMING_ENABLE; }
|
|
break;
|
|
case 21: settings.homing_dir_mask = trunc(value); break;
|
|
case 22: settings.homing_feed_rate = value; break;
|
|
case 23: settings.homing_seek_rate = value; break;
|
|
case 24: settings.homing_debounce_delay = round(value); break;
|
|
case 25: settings.homing_pulloff = value; break;
|
|
default:
|
|
return(STATUS_INVALID_STATEMENT);
|
|
}
|
|
write_global_settings();
|
|
return(STATUS_OK);
|
|
}
|
|
|
|
// Initialize the config subsystem
|
|
void settings_init() {
|
|
if(!read_global_settings()) {
|
|
report_status_message(STATUS_SETTING_READ_FAIL);
|
|
settings_reset(true);
|
|
report_grbl_settings();
|
|
}
|
|
// Read all parameter data into a dummy variable. If error, reset to zero, otherwise do nothing.
|
|
float coord_data[N_AXIS];
|
|
uint8_t i;
|
|
for (i=0; i<=SETTING_INDEX_NCOORD; i++) {
|
|
if (!settings_read_coord_data(i, coord_data)) {
|
|
report_status_message(STATUS_SETTING_READ_FAIL);
|
|
}
|
|
}
|
|
// NOTE: Startup lines are handled and called by main.c at the end of initialization.
|
|
}
|