3c9c516a47
- WARNING: Completely untested. Will later when there is time. Settings WILL be overwritten, as there are new settings. - Soft limits installed. Homing must be enabled for soft limits to work correctly. Errors out much like a hard limit, locking out everything and bringing up the alarm mode. Only difference is it forces a feed hold before doing so. Position is not lost. - IMPORTANT: Homing had to be updated so that soft limits work better with less CPU overhead. When homing completes, all axes are assumed to exist in negative space. If your limit switch is other side, the homing cycle with set this axis location to the max travel value, rather than zero. - Update mc_line() to accept an array, rather than individual variables. - Added an mc_auto_cycle_start() function handle this feature. Organization only. -
34 lines
1019 B
C
34 lines
1019 B
C
/*
|
|
limits.h - code pertaining to limit-switches and performing the homing cycle
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
Copyright (c) 2013 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef limits_h
|
|
#define limits_h
|
|
|
|
// Initialize the limits module
|
|
void limits_init();
|
|
|
|
// Perform the homing cycle
|
|
void limits_go_home();
|
|
|
|
// Check for soft limit violations
|
|
void limits_soft_check(float *target);
|
|
|
|
#endif |