94 lines
3.8 KiB
C
94 lines
3.8 KiB
C
/*
|
|
motion_control.c - high level interface for issuing motion commands
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <avr/io.h>
|
|
#include "settings.h"
|
|
#include "motion_control.h"
|
|
#include <util/delay.h>
|
|
#include <math.h>
|
|
#include <stdlib.h>
|
|
#include "nuts_bolts.h"
|
|
#include "stepper.h"
|
|
#include "planner.h"
|
|
#include "wiring_serial.h"
|
|
|
|
|
|
void mc_dwell(uint32_t milliseconds)
|
|
{
|
|
st_synchronize();
|
|
_delay_ms(milliseconds);
|
|
}
|
|
|
|
// Execute linear motion in absolute millimeter coordinates. Feed rate given in millimeters/second
|
|
// unless invert_feed_rate is true. Then the feed_rate means that the motion should be completed in
|
|
// 1/feed_rate minutes.
|
|
// void mc_line(double x, double y, double z, double feed_rate, int invert_feed_rate)
|
|
// {
|
|
// plan_buffer_line(x, y, z, feed_rate, invert_feed_rate);
|
|
// }
|
|
|
|
// Execute an arc. theta == start angle, angular_travel == number of radians to go along the arc,
|
|
// positive angular_travel means clockwise, negative means counterclockwise. Radius == the radius of the
|
|
// circle in millimeters. axis_1 and axis_2 selects the circle plane in tool space. Stick the remaining
|
|
// axis in axis_l which will be the axis for linear travel if you are tracing a helical motion.
|
|
|
|
// The arc is approximated by generating a huge number of tiny, linear segments. The length of each
|
|
// segment is configured in settings.mm_per_arc_segment.
|
|
void mc_arc(double theta, double angular_travel, double radius, double linear_travel, int axis_1, int axis_2,
|
|
int axis_linear, double feed_rate, int invert_feed_rate)
|
|
{
|
|
int32_t position[3];
|
|
plan_get_position_steps(&position);
|
|
int acceleration_manager_was_enabled = plan_is_acceleration_manager_enabled();
|
|
plan_set_acceleration_manager_enabled(FALSE); // disable acceleration management for the duration of the arc
|
|
double millimeters_of_travel = hypot(angular_travel*radius, labs(linear_travel));
|
|
if (millimeters_of_travel == 0.0) { return; }
|
|
uint16_t segments = ceil(millimeters_of_travel/settings.mm_per_arc_segment);
|
|
// Multiply inverse feed_rate to compensate for the fact that this movement is approximated
|
|
// by a number of discrete segments. The inverse feed_rate should be correct for the sum of
|
|
// all segments.
|
|
if (invert_feed_rate) { feed_rate *= segments; }
|
|
// The angular motion for each segment
|
|
double theta_per_segment = angular_travel/segments;
|
|
// The linear motion for each segment
|
|
double linear_per_segment = linear_travel/segments;
|
|
// Compute the center of this circle
|
|
double center_x = (position[axis_1]/settings.steps_per_mm[axis_1])-sin(theta)*radius;
|
|
double center_y = (position[axis_2]/settings.steps_per_mm[axis_2])-cos(theta)*radius;
|
|
// a vector to track the end point of each segment
|
|
double target[3];
|
|
int i;
|
|
// Initialize the linear axis
|
|
target[axis_linear] = position[axis_linear]/settings.steps_per_mm[axis_linear];
|
|
for (i=0; i<=segments; i++) {
|
|
target[axis_linear] += linear_per_segment;
|
|
theta += theta_per_segment;
|
|
target[axis_1] = center_x+sin(theta)*radius;
|
|
target[axis_2] = center_y+cos(theta)*radius;
|
|
plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], feed_rate, invert_feed_rate);
|
|
}
|
|
plan_set_acceleration_manager_enabled(acceleration_manager_was_enabled);
|
|
}
|
|
|
|
void mc_go_home()
|
|
{
|
|
st_go_home();
|
|
}
|